Displaying publications 1 - 20 of 50 in total

Abstract:
Sort:
  1. Fulltext A review on using crumb rubber in reinforcement of asphalt pavement
    Mashaan NS, Ali AH, Karim MR, Abdelaziz M
    ScientificWorldJournal, 2014;2014:214612.
    PMID: 24688369 DOI: 10.1155/2014/214612
    An immense problem affecting environmental pollution is the increase of waste tyre vehicles. In an attempt to decrease the magnitude of this issue, crumb rubber modifier (CRM) obtained from waste tyre rubber has gained interest in asphalt reinforcement. The use of crumb rubber in the reinforcement of asphalt is considered as a smart solution for sustainable development by reusing waste materials, and it is believed that crumb rubber modifier (CRM) could be an alternative polymer material in improving hot mix asphalt performance properties. In this paper, a critical review on the use of crumb rubber in reinforcement of asphalt pavement will be presented and discussed. It will also include a review on the effects of CRM on the stiffness, rutting, and fatigue resistance of road pavement construction.
    Matched MeSH terms: Waste Management/methods*
  2. Food waste and food processing waste for biohydrogen production: a review
    Yasin NH, Mumtaz T, Hassan MA, Abd Rahman N
    J Environ Manage, 2013 Nov 30;130:375-85.
    PMID: 24121591 DOI: 10.1016/j.jenvman.2013.09.009
    Food waste and food processing wastes which are abundant in nature and rich in carbon content can be attractive renewable substrates for sustainable biohydrogen production due to wide economic prospects in industries. Many studies utilizing common food wastes such as dining hall or restaurant waste and wastes generated from food processing industries have shown good percentages of hydrogen in gas composition, production yield and rate. The carbon composition in food waste also plays a crucial role in determining high biohydrogen yield. Physicochemical factors such as pre-treatment to seed culture, pH, temperature (mesophilic/thermophilic) and etc. are also important to ensure the dominance of hydrogen-producing bacteria in dark fermentation. This review demonstrates the potential of food waste and food processing waste for biohydrogen production and provides a brief overview of several physicochemical factors that affect biohydrogen production in dark fermentation. The economic viability of biohydrogen production from food waste is also discussed.
    Matched MeSH terms: Waste Management/methods*
  3. Challenges in sustainable management of construction and demolition waste
    Agamuthu P
    Waste Manag Res, 2008 Dec;26(6):491-2.
    PMID: 19039063 DOI: 10.1177/0734242X08100096
    Matched MeSH terms: Waste Management/methods*
  4. Fulltext Waste level detection and HMM based collection scheduling of multiple bins
    Aziz F, Arof H, Mokhtar N, Shah NM, Khairuddin ASM, Hanafi E, et al.
    PLoS One, 2018;13(8):e0202092.
    PMID: 30157219 DOI: 10.1371/journal.pone.0202092
    In this paper, an image-based waste collection scheduling involving a node with three waste bins is considered. First, the system locates the three bins and determines the waste level of each bin using four Laws Masks and a set of Support Vector Machine (SVM) classifiers. Next, a Hidden Markov Model (HMM) is used to decide on the number of days remaining before waste is collected from the node. This decision is based on the HMM's previous state and current observations. The HMM waste collection scheduling seeks to maximize the number of days between collection visits while preventing waste contamination due to late collection. The proposed system was trained using 100 training images and then tested on 100 test images. Each test image contains three bins that might be shifted, rotated, occluded or toppled over. The upright bins could be empty, partially full or full of garbage of various shapes and sizes. The method achieves bin detection, waste level classification and collection day scheduling rates of 100%, 99.8% and 100% respectively.
    Matched MeSH terms: Waste Management/methods*
  5. An overview of biomass thermochemical conversion technologies in Malaysia
    Chan YH, Cheah KW, How BS, Loy ACM, Shahbaz M, Singh HKG, et al.
    Sci Total Environ, 2019 Aug 25;680:105-123.
    PMID: 31100662 DOI: 10.1016/j.scitotenv.2019.04.211
    The rising pressure on both cleaner production and sustainable development have been the main driving force that pushes mankind to seek for alternative greener and sustainable feedstocks for chemical and energy production. The biomass 'waste-to-wealth' concept which convert low value biomass into value-added products which contain high economic potential, have attracted the attentions from both academicians and industry players. With a tropical climate, Malaysia has a rich agricultural sector and dense tropical rainforest, giving rise to abundance of biomass which most of them are underutilized. Hence, the biomass 'waste-to-wealth' conversion through various thermochemical conversion technologies and the prospective challenges towards commercialization in Malaysia are reviewed in this paper. In this paper, a critical review about the maturity status of the four most promising thermochemical conversion routes in Malaysia (i.e. gasification, pyrolysis, liquefaction and hydroprocessing) is given. The current development of thermochemical conversion technologies for biomass conversion in Malaysia is also reviewed and benchmarked against global progress. Besides, the core technical challenges in commercializing these green technologies are highlighted as well. Lastly, the future outlook for successful commercialization of these technologies in Malaysia is included.
    Matched MeSH terms: Waste Management/methods*
  6. Fulltext Energy-saving method for technogenic waste processing
    Dikhanbaev B, Gomes C, Dikhanbaev AB
    PLoS One, 2017;12(12):e0187790.
    PMID: 29281646 DOI: 10.1371/journal.pone.0187790
    Dumps of a mining-metallurgical complex of post-Soviet Republics have accumulated a huge amount of technogenic waste products. Out of them, Kazakhstan alone has preserved about 20 billion tons. In the field of technogenic waste treatment, there is still no technical solution that leads it to be a profitable process. Recent global trends prompted scientists to focus on developing energy-saving and a highly efficient melting unit that can significantly reduce specific fuel consumption. This paper reports, the development of a new technological method-smelt layer of inversion phase. The introducing method is characterized by a combination of ideal stirring and ideal displacement regimes. Using the method of affine modelling, recalculation of pilot plant's test results on industrial sample has been obtained. Experiments show that in comparison with bubbling and boiling layers of smelt, the degree of zinc recovery increases in the layer of inversion phase. That indicates the reduction of the possibility of new formation of zinc silicates and ferrites from recombined molecules of ZnO, SiO2, and Fe2O3. Calculations show that in industrial samples of the pilot plant, the consumption of natural gas has reduced approximately by two times in comparison with fuming-furnace. The specific fuel consumption has reduced by approximately four times in comparison with Waelz-kiln.
    Matched MeSH terms: Waste Management/methods*
  7. Establishment of suitable separation distance by using different methods for malodor mitigation from palm oil mill
    Yaacof N, Qamaruz Zaman N, Yusup Y, Yusoff S
    Environ Sci Pollut Res Int, 2019 Aug;26(23):24286-24299.
    PMID: 31214886 DOI: 10.1007/s11356-019-05517-z
    Malaysia is the second-largest producer and exporter of palm oil amounting to 39% of world palm oil production and 44% of world exports (MPOB, 2014). An enormous amount of palm oil mill effluent is released during palm oil milling, and the effluent causes a major odor problem. Many methods, such as biofiltering, can be adopted to manage the malodor. However, these methods are expensive and require high maintenance. The separation distance method can be used as an alternative due to its low cost and effectiveness. This research was conducted to verify the performance of three different methods, namely, in-field monitoring by using an olfactometer, CALPUFF model, and Gaussian plume model. Given that no research has compared the three methods, this study examined the effectiveness of the methods and determined which among them is suitable for use in Malaysia. The appropriate separation distances were 1.3 km for in-field monitoring, 1.2 km for the CALPUFF model, and 0.5 for the Gaussian plume model. These different values of separation distance were due to the various approaches involved in each method. This research determined an appropriate means to establish a proper separation distance for reducing odor nuisance in areas around palm oil mills.
    Matched MeSH terms: Waste Management/methods*
  8. Municipal solid waste characterization, Tehran-Iran
    Heravi HM, Sabour MR, Mahvi AH
    Pak J Biol Sci, 2013 Aug 15;16(16):759-69.
    PMID: 24498828
    Effective waste management has been greatly restricted by insufficient statistical data on the generation, processing and waste disposal. This study was undertaken in the municipality of Tehran. A total of 6,060 samples were compared by statistically comparing source generation, destination and intermediate stations. The results from these analyses showed that the average per capita waste generation in Tehran was 589 g day(-1). It was also observed that, of the total amount of waste generated in the municipality of Tehran, 73% was domestic waste and 27% was non-domestic waste. In addition, 68% of total household waste was organic waste, while 41% of non-domestic waste was organic waste. Furthermore, 61% of waste in Tehran was generated at the source, while 72% of the waste coming into the Aradkoh disposal and processing center was organic waste. The physical analysis was showed that there was no significant difference between the wastes generated in 2004 and those generated in 2009 and that there was not equal percentage of wet waste coming into the disposal center with urban service stations. This indicates that active source separation programs in metropolitan Tehran.
    Matched MeSH terms: Waste Management/methods*
  9. Role of sustainable development goals in advancing the circular economy: A state-of-the-art review on past, present and future directions
    Fauzi MA, Abidin NHZ, Omer MM, Kineber AF, Rahman ARA
    Waste Manag Res, 2024 Jul;42(7):520-532.
    PMID: 37681563 DOI: 10.1177/0734242X231196765
    The purpose of this study is to review the relationship between the highly anticipated concept of circular economy (CE) and sustainable development goals (SDGs). These two sustainability principles have transformed organizations and countries in their quest to achieve sustainable development. Despite their importance to the business and corporate realm, the discussion of these two concepts has been developed in silos, arbitrarily connected. Through a bibliometric approach, this study reviewed 226 journal publications and 16,008 cited references from the Web of Science (WoS) to understand the past, present and future trends of the two concepts and their impact on the sustainability development. The bibliometric approach of citation, co-citation and co-word analysis uncovers the relevant and significant themes and research streams. Theoretical and practical implications were discussed within the broader business and governance perspective to develop a substantial triple bottom line in creating a sustainable future for civil society.
    Matched MeSH terms: Waste Management/methods
  10. Influence of palm oil mill effluent as inoculum on anaerobic digestion of cattle manure for biogas production
    Saidu M, Yuzir A, Salim MR, Salmiati, Azman S, Abdullah N
    Bioresour Technol, 2013 Aug;141:174-6.
    PMID: 23588120 DOI: 10.1016/j.biortech.2013.03.111
    Anaerobic digestion for palm oil mill effluent (POME) is widely known for its potential in biogass production. In this study, the potential of using cattle manure for biogas production in complete mix anaerobic bioreactor was investigated using POME at unregulated pH and temperature. Two identical bioreactors were used in this study; namely R1 and R2 fed with cattle manure without and with POME as inoculum, respectively. Both bioreactors were allowed for five days to run in batch mode followed by semi continuous operations at HRT of 20 days. R2 produced 41% methane content compared to 18% produced in R1. A better COD percentage reduction of 45% was found in R2 which was operated with POME as inoculum compared to R1 with 35%. These results indicated that POME as inoculum has an influence on the start-up time and the rate of biogas produced.This findings will help in waste reduction.
    Matched MeSH terms: Waste Management/methods
  11. Appraisal of domestic solid waste generation, components, and the feasibility of recycling in Erbil, Iraq
    Shuokr Qarani Aziz, Hamidi Abdul Aziz, Mohammed Jk Bashir, Mohd Suffian Yusoff
    Waste Manag Res, 2011 Aug;29(8):880-7.
    PMID: 21242179 DOI: 10.1177/0734242X10387462
    Solid waste collection and disposal are among the most vital services provided to about 700 770 residents of the city of Erbil in northern Iraq. As such, proper waste management systems that consider both the quantity and composition of domestic solid waste are strongly required to address the increasing amount of solid waste. Unfortunately, these essential data are not easily available. The present study sought to gather data on the quantity and composition of domestic solid waste collected from different quarters in Erbil, and the feasibility of recycling these wastes. The solid waste generation rate (GR), uncompacted density, and weight percentages of combustible and incombustible materials were determined based on the collected materials (i.e., food, plastic, paper, metal, glass and cloth). The results show that the average GR and uncompacted density were 0.654 kg capita(-1) day(-1) and 175.72 kg m(-3), respectively. The weight percentages of food, plastic, paper, metal, glass, and cloth as components of domestic solid waste were 79.34, 6.28, 5.9, 3.6, 3.42 and 1.45%, respectively.
    Matched MeSH terms: Waste Management/methods*
  12. Utilization of rice husk ash as novel adsorbent: a judicious recycling of the colloidal agricultural waste
    Foo KY, Hameed BH
    Adv Colloid Interface Sci, 2009 Nov 30;152(1-2):39-47.
    PMID: 19836724 DOI: 10.1016/j.cis.2009.09.005
    Concern about environmental protection has aroused over the years from a global viewpoint. To date, the ever-increasing importance of biomass as the energy and material resources has lately been accounted by the rising prices for the crude petroleum oil. Rice husk ash, the most appropriate representative of the high ash biomass waste, is currently obtaining sufficient attraction, owning to its wide usefulness and potentiality in environmental conservation. Confirming the assertion, this paper presents a state of the art review of the rice milling industry, its background studies, fundamental properties and industrial applications. Moreover, the key advance on the preparation of novel adsorbents, its major challenges together with the future expectation has been highlighted and discussed. Conclusively, the expanding of rice husk ash in the field of adsorption science represents a viable and powerful tool, leading to the superior improvement of pollution control and environmental preservation.
    Matched MeSH terms: Waste Management/methods*
  13. An application of the theory of planned behaviour to study the influencing factors of participation in source separation of food waste
    Karim Ghani WA, Rusli IF, Biak DR, Idris A
    Waste Manag, 2013 May;33(5):1276-81.
    PMID: 23415709 DOI: 10.1016/j.wasman.2012.09.019
    Tremendous increases in biodegradable (food waste) generation significantly impact the local authorities, who are responsible to manage, treat and dispose of this waste. The process of separation of food waste at its generation source is identified as effective means in reducing the amount food waste sent to landfill and can be reused as feedstock to downstream treatment processes namely composting or anaerobic digestion. However, these efforts will only succeed with positive attitudes and highly participations rate by the public towards the scheme. Thus, the social survey (using questionnaires) to analyse public's view and influencing factors towards participation in source separation of food waste in households based on the theory of planned behaviour technique (TPB) was performed in June and July 2011 among selected staff in Universiti Putra Malaysia, Serdang, Selangor. The survey demonstrates that the public has positive intention in participating provided the opportunities, facilities and knowledge on waste separation at source are adequately prepared by the respective local authorities. Furthermore, good moral values and situational factors such as storage convenience and collection times are also encouraged public's involvement and consequently, the participations rate. The findings from this study may provide useful indicator to the waste management authorities in Malaysia in identifying mechanisms for future development and implementation of food waste source separation activities in household programmes and communication campaign which advocate the use of these programmes.
    Matched MeSH terms: Waste Management/methods*
  14. Conceptual framework for the study of food waste generation and prevention in the hospitality sector
    Papargyropoulou E, Wright N, Lozano R, Steinberger J, Padfield R, Ujang Z
    Waste Manag, 2016 Mar;49:326-336.
    PMID: 26803473 DOI: 10.1016/j.wasman.2016.01.017
    Food waste has significant detrimental economic, environmental and social impacts. The magnitude and complexity of the global food waste problem has brought it to the forefront of the environmental agenda; however, there has been little research on the patterns and drivers of food waste generation, especially outside the household. This is partially due to weaknesses in the methodological approaches used to understand such a complex problem. This paper proposes a novel conceptual framework to identify and explain the patterns and drivers of food waste generation in the hospitality sector, with the aim of identifying food waste prevention measures. This conceptual framework integrates data collection and analysis methods from ethnography and grounded theory, complemented with concepts and tools from industrial ecology for the analysis of quantitative data. A case study of food waste generation at a hotel restaurant in Malaysia is used as an example to illustrate how this conceptual framework can be applied. The conceptual framework links the biophysical and economic flows of food provisioning and waste generation, with the social and cultural practices associated with food preparation and consumption. The case study demonstrates that food waste is intrinsically linked to the way we provision and consume food, the material and socio-cultural context of food consumption and food waste generation. Food provisioning, food consumption and food waste generation should be studied together in order to fully understand how, where and most importantly why food waste is generated. This understanding will then enable to draw detailed, case specific food waste prevention plans addressing the material and socio-economic aspects of food waste generation.
    Matched MeSH terms: Waste Management/methods*
  15. Solid waste forecasting using modified ANFIS modeling
    Younes MK, Nopiah ZM, Basri NE, Basri H, Abushammala MF, K N A M
    J Air Waste Manag Assoc, 2015 Oct;65(10):1229-38.
    PMID: 26223583 DOI: 10.1080/10962247.2015.1075919
    Solid waste prediction is crucial for sustainable solid waste management. Usually, accurate waste generation record is challenge in developing countries which complicates the modelling process. Solid waste generation is related to demographic, economic, and social factors. However, these factors are highly varied due to population and economy growths. The objective of this research is to determine the most influencing demographic and economic factors that affect solid waste generation using systematic approach, and then develop a model to forecast solid waste generation using a modified Adaptive Neural Inference System (MANFIS). The model evaluation was performed using Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and the coefficient of determination (R²). The results show that the best input variables are people age groups 0-14, 15-64, and people above 65 years, and the best model structure is 3 triangular fuzzy membership functions and 27 fuzzy rules. The model has been validated using testing data and the resulted training RMSE, MAE and R² were 0.2678, 0.045 and 0.99, respectively, while for testing phase RMSE =3.986, MAE = 0.673 and R² = 0.98.
    Matched MeSH terms: Waste Management/methods*
  16. The economic case for low carbon waste management in rapidly growing cities in the developing world: The case of Palembang, Indonesia
    Papargyropoulou E, Colenbrander S, Sudmant AH, Gouldson A, Tin LC
    J Environ Manage, 2015 Nov 1;163:11-9.
    PMID: 26280124 DOI: 10.1016/j.jenvman.2015.08.001
    The provision of appropriate waste management is not only an indicator of development but also of broader sustainability. This is particularly relevant to expanding cities in developing countries faced with rising waste generation and associated environmental health problems. Despite these urgent issues, city authorities often lack the evidence required to make well-informed decisions. This study evaluates the carbon and economic performance of low-carbon measures in the waste sector at a city level, within the context of a developing country. Palembang in Indonesia is used as a case of a medium-sized city in a newly industrialized country, with relevance to other similar cities in the developing world. Evidence suggests that the waste sector can achieve substantial carbon emission reductions, and become a carbon sink, in a cost effective way. Hence there is an economic case for a low carbon development path for Palembang, and possibly for other cities in developing and developed countries facing similar challenges.
    Matched MeSH terms: Waste Management/methods*
  17. Biomass-based palm shell activated carbon and palm shell carbon molecular sieve as gas separation adsorbents
    Sethupathi S, Bashir MJ, Akbar ZA, Mohamed AR
    Waste Manag Res, 2015 Apr;33(4):303-12.
    PMID: 25804669 DOI: 10.1177/0734242X15576026
    Lignocellulosic biomass has been widely recognised as a potential low-cost source for the production of high added value materials and proved to be a good precursor for the production of activated carbons. One of such valuable biomasses used for the production of activated carbons is palm shell. Palm shell (endocarp) is an abundant by-product produced from the palm oil industries throughout tropical countries. Palm shell activated carbon and palm shell carbon molecular sieve has been widely applied in various environmental pollution control technologies, mainly owing to its high adsorption performance, well-developed porosity and low cost, leading to potential applications in gas-phase separation using adsorption processes. This mini-review represents a comprehensive overview of the palm shell activated carbon and palm shell carbon molecular sieve preparation method, physicochemical properties and feasibility of palm shell activated carbon and palm shell carbon molecular sieve in gas separation processes. Some of the limitations are outlined and suggestions for future improvements are pointed out.
    Matched MeSH terms: Waste Management/methods*
  18. Fulltext Environmental management for dengue control: a systematic review protocol
    Mahmud MAF, Abdul Mutalip MH, Lodz NA, Muhammad EN, Yoep N, Hashim MH, et al.
    BMJ Open, 2019 05 15;9(5):e026101.
    PMID: 31097485 DOI: 10.1136/bmjopen-2018-026101
    INTRODUCTION: Dengue is among the most important mosquito-borne diseases, with more than half of the world's population at risk of infection in dengue endemic countries. Environmental management, which includes any activities that involve environmental modification, environmental manipulation and changes to human behaviour have been used to mitigate the risk of dengue transmission. In this protocol, we will integrate the data from various sources to assess the overall effect of environmental management on the incidence of dengue and other entomological indices.

    METHODS AND ANALYSES: We will conduct a systematic review of intervention that assess the effect of environmental management on the incidence of dengue and/or entomological indices. We will include any studies that include intervention through environmental management for dengue control, involving environmental modification, environmental manipulation and changes to human behaviour. A comprehensive search will be performed in electronic databases PUBMED, CENTRAL, SCOPUS, Web of Science and relevant research websites such as PROPSERO, WHO ICTRP and ClinicalTrials.gov to identify studies that meet our inclusion criteria. A systematic approach to searching, screening, reviewing and data extraction will be applied based on Preferred Reporting Items for Systematic reviews and Meta-Analysis. Titles, abstract, keywords for eligibility will be examined independently by researchers. The quality of the included studies will be assessed using quality assessment tool for studies with diverse design and Cochrane risk of bias tool. The characteristics of the selected articles will be described based on the study design, types of intervention and outcomes of the study in various countries. These include the types of environmental management intervention methods and the effectiveness of the intervention in reducing dengue cases or incidence and impact on entomological indices.

    ETHICS AND DISSEMINATION: We will register this systematic review with the National Medical Research Register, Ministry of Health Malaysia. This protocol also had been registered with the PROSPERO. No ethical approval is necessary, as there will be no collection of primary data. The results will be disseminated though a peer-reviewed publication and conference presentation.

    TRIAL REGISTRATION NUMBER: CRD42018092189.

    Matched MeSH terms: Waste Management/methods
  19. Fulltext A Comparative Study of Biogas Production from Cattle Slaughterhouse Wastewater Using Conventional and Modified Upflow Anaerobic Sludge Blanket (UASB) Reactors
    Musa MA, Idrus S, Harun MR, Tuan Mohd Marzuki TF, Abdul Wahab AM
    Int J Environ Res Public Health, 2019 12 31;17(1).
    PMID: 31906118 DOI: 10.3390/ijerph17010283
    Cattle slaughterhouses generate wastewater that is rich in organic contaminant and nutrients, which is considered as high strength wastewater with a high potential for energy recovery. Work was undertaken to evaluate the efficiency of the 12 L laboratory scale conventional and a modified upflow anaerobic sludge blanket (UASB) reactors (conventional, R1 and modified, R2), for treatment of cattle slaughterhouse wastewater (CSWW) under mesophilic condition (35 ± 1 °C). Both reactors were acclimated with synthetic wastewater for 30 days, then continuous study with real CSWW proceeds. The reactors were subjected to the same loading condition of OLR, starting from 1.75, 3, 5 10, 14, and 16 g L-1d-1, corresponding to 3.5, 6, 10, 20, 28, and 32 g COD/L at constant hydraulic retention time (HRT) of 24 h. The performance of the R1 reactor drastically dropped at OLR 10 g L-1d-1, and this significantly affected the subsequent stages. The steady-state performance of the R2 reactor under the same loading condition as the R1 reactor revealed a high COD removal efficiency of 94% and biogas and methane productions were 27 L/d and 89%. The SMP was 0.21 LCH4/gCOD added, whereas the NH3-N alkalinity ratio stood at 651 mg/L and 0.2. SEM showed that the R2 reactor was dominated by Methanosarcina bacterial species, while the R1 reactor revealed a disturb sludge with insufficient microbial biomass.
    Matched MeSH terms: Waste Management/methods*
  20. Preliminary observation on the effect of baking soda volume on controlling odour from discarded organic waste
    Qamaruz-Zaman N, Kun Y, Rosli RN
    Waste Manag, 2015 Jan;35:187-90.
    PMID: 25445259 DOI: 10.1016/j.wasman.2014.09.017
    Food wastes with high moisture and organic matter content are likely to emit odours as a result of the decomposition process. The management of odour from decomposing wastes is needed to sustain the interest of residents and local councils in the source separation of kitchen wastes. This study investigated the potential of baking soda (at 50 g, 75 g and 100g per kg food waste) to control odour from seven days stored food waste. It was found that 50 g of baking soda, spread at the bottom of 8l food wastes bin, can reduce the odour by about 70%. A higher amount (above 100g) is not advised as a pH higher than 9.0 may be induced leading to the volatilization of odorous ammonia. This research finding is expected to benefit the waste management sector, food processing industries as well as the local authorities where malodour from waste storage is a pressing issue.
    Matched MeSH terms: Waste Management/methods*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links