Displaying publications 1 - 20 of 59 in total

Abstract:
Sort:
  1. Simultaneous adsorption of a mixture of paraquat and dye by NaY zeolite covered with alkylsilane
    Nur H, Manan AF, Wei LK, Muhid MN, Hamdan H
    J Hazard Mater, 2005 Jan 14;117(1):35-40.
    PMID: 15621351
    The surfaces of NaY zeolite particles were modified by the alkylsilylation of n-octadecyltrichlorosilane (OTS). Two kinds of modified NaY zeolites were prepared; one with its external surface partially and the other fully covered with alkylsilyl groups. Since the size of OTS is bigger than the pore diameter of NaY, it is attached on the external surface, leaving the internal pore accessible to adsorbate molecules. As a result of alkylsilylation, the adsorption properties of these sorbents were improved. The adsorption properties of these materials were tested by their reaction in a mixture of paraquat and blue dye. The results demonstrate that the alkysilylated NaY materials are capable of simultaneous adsorption of paraquat and blue dye. Paraquat was selectively adsorbed into the internal pore of the zeolite whereas the dye on the externally attached alkylsilyl groups of the sorbent; displaying the unique bimodal amphiphilic character of the alkylsilylated NaY zeolites.
    Matched MeSH terms: Triazines*
  2. Fulltext Synthesis and thermal degradation studies of melamine formaldehyde resins
    Ullah S, Bustam MA, Nadeem M, Naz MY, Tan WL, Shariff AM
    ScientificWorldJournal, 2014;2014:940502.
    PMID: 25436237 DOI: 10.1155/2014/940502
    Melamine formaldehyde (MF) resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA). The maximum percentage of solid content (69.7%) was obtained at pH 8.5 and 75°C temperature. The molecular weight of MF resin was increased with an increase of melamine monomer concentration. The highest residual weight 14.125 wt.% was obtained with sample 10.
    Matched MeSH terms: Triazines/chemical synthesis*; Triazines/metabolism*
  3. Multiple-dose pharmacokinetic study of proguanil and cycloguanil following 12-hourly administration of 100 mg proguanil hydrochloride
    Jamaludin A, Mohamad M, Navaratnam V, Yeoh PY, Wernsdorfer WH
    Trop. Med. Parasitol., 1990 Sep;41(3):268-72.
    PMID: 2255843
    A pharmacokinetic study with 12-hourly doses of 100 mg proguanil hydrochloride over 15 days has been conducted in six adult male Malaysian volunteers. Steady state for proguanil was established after the fourth dose on Day 2, for the active metabolite cycloguanil as from Day 3 inclusive. The steady state mean peak concentration of proguanil was 1201.6 +/- 132.4 nmol/l, the mean trough concentration 650.0 +/- 58.1 nmol/l. The corresponding values for cycloguanil were 317.0 +/- 44.4 nmol/l (mean peak) and 230.8 +/- 35.1 nmol/l (mean trough). The profiles and peak/trough ratios of proguanil and cycloguanil with 12-hourly dosing offer better prospects for protection against malaria than those obtained with 24-hourly doses of 200 mg proguanil hydrochloride, the current routine in malaria chemoprophylaxis.
    Matched MeSH terms: Triazines/administration & dosage; Triazines/blood; Triazines/pharmacokinetics*
  4. Melamine foam in Dentistry
    Sidhu P, Muthusamy S, Kannan S, Muthu K
    Int J Dent Hyg, 2015 Nov;13(4):239-40.
    PMID: 25847230 DOI: 10.1111/idh.12137
    Matched MeSH terms: Triazines/chemistry*
  5. Persistence of terbuthylazine in soils
    Sahid IB, Teoh SS
    Bull Environ Contam Toxicol, 1994 Feb;52(2):226-30.
    PMID: 8123982
    Matched MeSH terms: Triazines/analysis*; Triazines/chemistry*
  6. Chitosan hydrogel beads impregnated with hexadecylamine for improved reactive blue 4 adsorption
    Vakili M, Rafatullah M, Ibrahim MH, Abdullah AZ, Salamatinia B, Gholami Z
    Carbohydr Polym, 2016 Feb 10;137:139-146.
    PMID: 26686114 DOI: 10.1016/j.carbpol.2015.09.017
    Adsorption performance of chitosan (CS) hydrogel beads was investigated after impregnation of CS with hexadecylamine (HDA) as a cationic surfactant, for the elimination of reactive blue 4 (RB4) from wastewater. The CS/HDA beads formed with 3.8% HDA were the most effective adsorbent. The adsorption capacity was increased by 1.43 times from 317 mg/g (CS) to 454 mg/g (CS/HDA). The RB4 removal increased with decrease in the pH of dye solution from 4 to 9. The isotherm data obtained from RB4 adsorption on CS and CS/HDA are adequately described by Freundlich model (R(2)=0.946 and 0.934, χ(2)=22.414 and 64.761). The kinetic study revealed that the pseudo-second-order rate model (R(2)=0.996 and 0.997) was in better agreement with the experimental data. The negative values of ΔG° (-2.28 and -6.30 kJ/mol) and ΔH° (-172.18 and -101.62 kJ/mol) for CS beads and HDA modified CS beads, respectively; suggested a spontaneous and exothermic process for RB4 adsorption.
    Matched MeSH terms: Triazines/chemistry*
  7. Effects of thiram and terbuthylazine on cellulose decomposition in two soils
    Sahid I, Razlin W, Zaabar W
    Bull Environ Contam Toxicol, 1993 Oct;51(4):605-11.
    PMID: 8400666
    Matched MeSH terms: Triazines/pharmacology*
  8. Triazinoindole analogs as potent inhibitors of α-glucosidase: synthesis, biological evaluation and molecular docking studies
    Rahim F, Ullah K, Ullah H, Wadood A, Taha M, Ur Rehman A, et al.
    Bioorg Chem, 2015 Feb;58:81-7.
    PMID: 25528720 DOI: 10.1016/j.bioorg.2014.12.001
    A new series of triazinoindole analogs 1-11 were synthesized, characterized by EI-MS and (1)H NMR, evaluated for α-glucosidase inhibitory potential. All eleven (11) analogs showed different range of α-glucosidase inhibitory potential with IC50 value ranging between 2.46±0.008 and 312.79±0.06 μM when compared with the standard acarbose (IC50, 38.25±0.12 μM). Among the series, compounds 1, 3, 4, 5, 7, 8, and 11 showed excellent inhibitory potential with IC50 values 2.46±0.008, 37.78±0.05, 28.91±0.0, 38.12±0.04, 37.43±0.03, 36.89±0.06 and 37.11±0.05 μM respectively. All other compounds also showed good enzyme inhibition. The binding modes of these analogs were confirmed through molecular docking.
    Matched MeSH terms: Triazines/chemical synthesis; Triazines/pharmacology*; Triazines/chemistry*
  9. Fulltext The study of commercial titanium dioxide (TiO2) degussa P25 for the adsorption of acidic dye
    Nur Shazwani Abdul Mubarak, S. Sabar, Ali H. Jawad
    Science Letters, 2020;14(1):68-83.
    MyJurnal
    Commercial titanium dioxide Degussa P25 (TiO2) was used for the adsorption of reactive red 120
    (RR120) dye in a batch system. The optimization functions such as solution pH (3-12), adsorbent dosage (0.02 g-1.2 g), and initial dye concentration (30-400 mg/L) were studied. The equilibrium adsorption data for RR120 dye was analyzed by two types of isotherm models which are Langmuir and Freundlich models. The adsorption at equilibrium showed a better fit for linear Langmuir isotherm with the adsorption capacity, qmax of 18.62 mg/g at 303 K. The adsorption kinetic was well-described by pseudosecond order model. TiO2 showed a decent outcome due to the ability to adsorb target pollutants with theadded advantage of providing large hydroxyl groups (OH) on the surface of TiO2 so that pollutants can be adsorbed by interacting on the surface of OH.
    Matched MeSH terms: Triazines
  10. Microwave assisted synthesis of 2,2'-arylene-substituted bis(4H-3,1-benzoxazin-4-one) derivatives using the complex cyanuric chloride/N,N-dimethylformamide
    Shariat M, Samsudin MW, Zakaria Z
    Molecules, 2012 Sep 28;17(10):11607-15.
    PMID: 23023686
    A new and efficient method has been designed to prepare 2,2'-arylene-substituted bis(4H-3,1-benzoxazin-4-one) derivatives by using the mixture of cyanuric chloride and N,N-dimethylformamide in a microwave-assisted reaction. The method used and presented here has good rate enhancement and excellent yields.
    Matched MeSH terms: Triazines/chemistry*
  11. New triazinoindole bearing thiazole/oxazole analogues: Synthesis, α-amylase inhibitory potential and molecular docking study
    Rahim F, Tariq S, Taha M, Ullah H, Zaman K, Uddin I, et al.
    Bioorg Chem, 2019 11;92:103284.
    PMID: 31546207 DOI: 10.1016/j.bioorg.2019.103284
    New triazinoindole bearing thiazole/oxazole analogues (1-21) were synthesized and characterized through spectroscopic techniques such as HREI-MS, 1H and 13C NMR. The configuration of compound 2i and 2k was confirmed through NOESY. All analogues were evaluated against α-amylase inhibitory potential. Among the synthesized analogues, compound 1h, 1i, 1j, 2a and 2f having IC50 values 1.80 ± 0.20, 1.90 ± 0.30, 1.2 ± 0.30, 1.2 ± 0.01 and 1.30 ± 0.20 μM respectively, showed excellent α-amylase inhibitory potential when compared with acarbose as standard (IC50 = 0.91 ± 0.20 µM). All other analogues showed good to moderate inhibitory potential. Structural activity relationship (SAR) has been established and binding interactions were confirmed through docking studies.
    Matched MeSH terms: Triazines/chemical synthesis; Triazines/pharmacology*; Triazines/chemistry
  12. Fulltext Application of statistical experimental designs for optimization of medium composition in biodegradation of procion red MX-8B
    Khadijah, O., Lee, K.K., Abdullah, M.F.F.
    ASM Science Journal, 2010;4(2):103-112.
    MyJurnal
    Two sequential statistical experimental designs were used to screen and investigate the dependence of the amount of biodegradation of Procion Red MX-8B (PR-MX8B) on the fermentation variables. Fourteen factors were screened using the Plackett-Burman design. Among these factors, the most significant variables which included yeast extract, corn steep solids and starch influencing PR-MX8B decolourisation were statistically elucidated for optimization. The optimum concentrations of 5.00 g/l yeast extract, 2.99 g/l starch and 1.89 g/l corn steep solids were predicted by applying the Box-Behnken design to the second order polynomial model fitted to the results obtained. The best predicted optimal conditions verified experimentally yielded 72.11% while the predicted value from the polynomial model was 79.17%. The experimental values were in good agreement with the predicted values with a 90.81% degree of accuracy.
    Matched MeSH terms: Triazines
  13. Dispersive liquid-liquid microextraction method based on solidification of floating organic droplet for the determination of triazine herbicides in water and sugarcane samples
    Sanagi MM, Abbas HH, Ibrahim WA, Aboul-Enien HY
    Food Chem, 2012 Jul 15;133(2):557-62.
    PMID: 25683433 DOI: 10.1016/j.foodchem.2012.01.036
    Dispersive liquid-liquid microextraction method based on solidification of floating organic droplet (DLLME-SFO) was developed for the analysis of triazines. As model compounds four selected triazine herbicides namely, simazine, atrazine, secbumeton and cyanazine were employed to estimate the extraction efficiency. The experimental conditions were comprehensively studied for the DLLME-SFO method. Under the use of 10 μL of 1-undecanol as extraction solvent, 100 μL of acetonitrile as disperser solvent and 5% (w/v) NaCl for 3 min the results demonstrated that the repeatability (RSD%) of the optimised DLLME-SFO method ranged from 0.03% to 5.1% and the linearity in the range of 0.01-100 ppb. Low limits of detection (0.037-0.008 ppb), and good enrichment factors (195-322) were obtained. The DLLME-SFO method applied in water and sugarcane samples showed excellent relative recoveries (95.7-116.9%) with RSDs <8.6% (n=3) for all samples.
    Matched MeSH terms: Triazines/analysis; Triazines/isolation & purification*
  14. Analysis of melamine migration from melamine food contact articles
    Chik Z, Haron DE, Ahmad ED, Taha H, Mustafa AM
    Food Addit Contam Part A Chem Anal Control Expo Risk Assess, 2011;28(7):967-73.
    PMID: 21607892 DOI: 10.1080/19440049.2011.576401
    Migration of melamine has been determined for 41 types of retail melamine-ware products in Malaysia. This study was initiated by the Ministry of Health, Malaysia, in the midst of public anxiety on the possibility of melamine leaching into foods that come into contact with the melamine-ware. Thus, the objective of this study was to investigate the level of melamine migration in melamine utensils available on the market. Samples of melamine tableware, including cups and plates, forks and spoons, tumblers, bowls, etc., were collected from various retail outlets. Following the test guidelines for melamine migration set by the European Committee for Standardisation (CEN 2004) with some modifications, the samples were exposed to two types of food simulants (3% acetic acid and distilled water) at three test conditions (25°C (room temperature), 70 and 100°C) for 30 min. Melamine analysis was carried out using LC-MS/MS with a HILIC column and mobile phase consisting of ammonium acetate/formic acid (0.05%) in water and ammonium acetate/formic acid (0.05%) in acetonitrile (95 : 5, v/v). The limit of quantification (LOQ) was 5 ng/ml. Melamine migration was detected from all samples. For the articles tested with distilled water, melamine migration were [median (interquartile range)] 22.2 (32.6), 49.3 (50.9), 84.9 (89.9) ng/ml at room temperature (25°C), 70 and 100°C, respectively. In 3% acetic acid, melamine migration was 31.5 (35.7), 81.5 (76.2), 122.0 (126.7) ng/ml at room temperature (25°C), 70 and 100°C, respectively. This study suggests that excessive heat and acidity may directly affect melamine migration from melamine-ware products. However the results showed that melamine migration in the tested items were well below the specific migration limit (SML) of 30 mg/kg (30,000 ng/ml) set out in European Commission Directive 2002/72/EC.
    Matched MeSH terms: Triazines/analysis*; Triazines/toxicity
  15. Fulltext Degradation of Triazine-2-(14)C Metsulfuron-Methyl in Soil from an Oil Palm Plantation
    Ismail BS, Eng OK, Tayeb MA
    PLoS One, 2015;10(10):e0138170.
    PMID: 26437264 DOI: 10.1371/journal.pone.0138170
    Triazine-2-(14)C metsulfuron-methyl is a selective, systemic sulfonylurea herbicide. Degradation studies in soils are essential for the evaluation of the persistence of pesticides and their breakdown products. The purpose of the present study was to investigate the degradation of triazine-2-(14)C metsulfuron-methyl in soil under laboratory conditions. A High Performance Liquid Chromatograph (HPLC) equipped with an UV detector and an on-line radio-chemical detector, plus a Supelco Discovery column (250 x 4.6 mm, 5 μm), and PRP-1 column (305 x 7.0 mm, 10 μm) was used for the HPLC analysis. The radioactivity was determined by a Liquid Scintillation Counter (LSC) in scintillation fluid. The soil used was both sterilized and non-sterilized in order to observe the involvement of soil microbes. The estimated DT50 and DT90 values of metsulfuron-methyl in a non-sterile system were observed to be 13 and 44 days, whereas in sterilized soil, the DT50 and DT90 were 31 and 70 days, respectively. The principal degradation product after 60 days was CO2. The higher cumulative amount of (14)CO2 in (14)C-triazine in the non-sterilized soil compared to that in the sterile system suggests that biological degradation by soil micro-organisms significantly contributes to the dissipation of the compound. The major routes of degradation were O-demethylation, sulfonylurea bridge cleavage and the triazine "ring-opened."
    Matched MeSH terms: Triazines/metabolism; Triazines/chemistry*
  16. Fulltext Lamotrigine for trigeminal neuralgia: efficacy and safety in comparison with carbamazepine
    Shaikh S, Yaacob HB, Abd Rahman RB
    J Chin Med Assoc, 2011 Jun;74(6):243-9.
    PMID: 21621166 DOI: 10.1016/j.jcma.2011.04.002
    BACKGROUND: Anticonvulsants are regarded as useful for the treatment of neuropathic pain. In this study, we evaluated the efficacy and occurrence of side effects of lamotrigine (LTG) in comparison with carbamazepine (CBZ), in trigeminal neuralgia (TN) patients.

    METHODS: The study was an interventional and crossover comparison. Twenty-one patients with TN were administered with LTG in comparison to CBZ. The clinical trials comprised two phases of 40 days each, with an intervening three-day washout period. The final titration in dose for LTG was 400 mg and 1,200 mg for CBZ. Efficacy of the medications involved was determined by visual analog scale (VAS) and verbal rating scale (VRS). Side effects were recorded through marking of the profiles of side effects encountered on administration of LTG and CBZ, together with baseline haematological, hepatic and renal investigations.

    RESULTS: Both on VAS and VRS assessments, in terms of proportion of patients, CBZ benefitted 90.5% (19/21) of the patients with pain relief (p  0.05). Meanwhile, LTG inflicted 14% (3/21) of the patients with haematological, hepatic and renal derangements, as compared with 48% (10/21) on CBZ.

    CONCLUSION: LTG is generally an effective and safe treatment for management of TN, compared to CBZ.

    Matched MeSH terms: Triazines/adverse effects; Triazines/therapeutic use*
  17. Application of nitrogen-rich porous organic polymer for the solid-phase synthesis of 2-amino-4H-benzo[b]pyran scaffolds using ball milling process
    Zaharani L, Khaligh NG, Mihankhah T, Johan MR
    Mol Divers, 2021 Feb;25(1):323-332.
    PMID: 32361887 DOI: 10.1007/s11030-020-10092-4
    This paper presents the efficient synthesis of 2-amino-4H-benzo[b]pyrans using mesoporous poly-melamine-formaldehyde as a polymeric heterogeneous catalyst. According to the principals of green chemistry, the reaction was performed by the planetary ball milling process at ambient and neat conditions. The heterogeneous catalyst could be reused up to five runs with no reducing of catalytic efficiency. A variety of substituted 2-amino-4H-benzo[b]pyrans were obtained in good to excellent yields under eco-friendly conditions. Other advantages of the current methodology include short reaction time, wide substrate-scope, and use of a metal-free polymeric catalyst. Also, the current method avoids the use of hazardous reagents and solvents, tedious workup and multi-step purification. This work revealed that porous organic polymers containing Lewis base sites having acceptor-donner hydrogen bonding functional groups, and high porosity could play a vital role in the promotion of the one-pot multicomponent reactions in the solid-phase synthesis.
    Matched MeSH terms: Triazines/chemical synthesis; Triazines/chemistry
  18. Identification of sildenafil, tadalafil and vardenafil by gas chromatography-mass spectrometry on short capillary column
    Man CN, Nor NM, Lajis R, Harn GL
    J Chromatogr A, 2009 Nov 20;1216(47):8426-30.
    PMID: 19853256 DOI: 10.1016/j.chroma.2009.10.016
    Sildenafil and its analogues (tadalafil and vardenafil) are phosphodiesterase type 5 inhibitors used in the treatment of male erectile dysfunction. Some dietary supplements, herbal preparations and food products which claim to enhance male sexual function have been found to be adulterated with these drugs. In this study, a gas chromatograph-mass spectrometer (GC-MS) assay was developed for identification of the drugs. In addition to good and short chromatographic separation that can be achieved within 6 min by using a short 10 m capillary column, no prior sample clean-up before GC-MS analysis was required, thus making this assay a cost saving and rapid method. Furthermore, the assay is specific as the identification of sildenafil, tadalafil and vardenafil were done by detection of molecular ions; m/z 474, 389 and 488, [corrected] respectively, and several other characteristic ions resulted from the mass fragmentation of individual molecules. Using our currently developed assay, sildenafil and its analogues were successfully identified in food and herbal matrices.
    Matched MeSH terms: Triazines/analysis; Triazines/chemistry
  19. Evaluation of a magnetic activated charcoal modified with non-ionic silicone surfactant as a new magnetic solid phase extraction sorbent with triazine herbicides as model compounds in selected milk and rice samples
    Mohd NI, Gopal K, Raoov M, Mohamad S, Yahaya N, Lim V, et al.
    Talanta, 2019 May 01;196:217-225.
    PMID: 30683354 DOI: 10.1016/j.talanta.2018.12.043
    The non-ionic silicone surfactant (OFX 0309) has been applied in cloud point extraction for the extraction of triazine herbicides in food samples. Evidence has shown that the non-ionic silicone surfactant demonstrated a good performance as an extractor toward triazine herbicides. In this present study, OFX 0309 surfactant was combined with activated charcoal (AC) due to their valuable properties. Activated charcoal modified with non-ionic silicone surfactant coated with magnetic nanoparticles (AC-OFX MNPs) was synthesized and characterized by FT-IR, VSM, SEM, TEM and BET. This novel material was applied as a magnetic adsorbent for the pre-concentration and separation of triazine herbicides due to hydrophobic interaction between polysiloxane polyether of OFX 0309 surfactant and triazine herbicides. Under optimal conditions, the proposed magnetic solid phase extraction method using AC-OFX MNPs adsorbent was applied to extract triazine herbicides from selected milk and rice samples using high performance liquid chromatography coupled with diode array detector. The validation method revealed a good linearity (1 - 500 μg L-1) with the coefficient of determination (R2) in the range of 0.992-0.998 for the samples. The limits of detection (LOD) of the developed method were 0.04 - 0.05 µg L-1 (milk sample) and 0.02 - 0.05 µg L-1 (rice sample). The limits of quantification (LOQ) were 0.134 - 0.176 µg L-1 (milk sample) and 0.075 - 0.159 µg L-1 (rice sample). The recoveries of the triazine compounds ranged from 81% to 109% in spiked milk samples and from 81% to 111% in spiked rice samples, with relative standard deviations (RSD) values lower than 13.5% and 12.1% for milk and rice samples, respectively. To the best of our knowledge, this is the first study that have investigated the use of magnetic nanoparticles coated activated charcoal modified with OFX 0309 surfactant for pretreatment of triazine herbicides in food samples analysis for simultaneous separation of organic pollutants.
    Matched MeSH terms: Triazines/analysis*; Triazines/chemistry
  20. Fulltext Efficacy and tolerability of vardenafil in Asian men with erectile dysfunction
    Tan HM, Chin CM, Chua CB, Gatchalian E, Kongkanand A, Moh CL, et al.
    Asian J Androl, 2008 May;10(3):495-502.
    PMID: 18385912 DOI: 10.1111/j.1745-7262.2008.00388.x
    To evaluate the efficacy and tolerability of vardenafil, a phosphodiesterase type-5 (PDE-5) inhibitor, in men of Asian ethnicity with erectile dysfunction (ED).
    Matched MeSH terms: Triazines/adverse effects; Triazines/therapeutic use
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links