MyMedR

Displaying all 11 publications

Abstract:

Sort:

Transforming municipal cotton waste into a multilayer fibre biocomposite with high strength

Shi Y, Jiang J, Ye H, Sheng Y, Zhou Y, Foong SY, et al.

Environ Res, 2023 Feb 01;218:114967.
PMID: 36455630 DOI: 10.1016/j.envres.2022.114967

We analyzed the problematic textile fiber waste as potential precursor material to produce multilayer cotton fiber biocomposite. The properties of the products were better than the current dry bearing type particleboards and ordinary dry medium-density fiberboard in terms of the static bending strength (67.86 MPa), internal bonding strength (1.52 MPa) and water expansion rate (9.57%). The three-layer, four-layer and five-layer waste cotton fiber composite (WCFC) were tried in the experiment, the mechanical properties of the three-layer WCFC are insufficient, the five-layer WCFC is too thick and the four-layer WCFC had the best comprehensive performance. The cross-section morphology of the four-layer WCFC shows a dense structure with a high number of adhesives attached to the fiber. The hardness and stiffness of the four-layer cotton fiber composite enhanced by the high crystallinity of cellulose content, and several chemical bondings were presence in the composites. Minimum mass loss (30%) and thermal weight loss rate (0.70%/°C) was found for the four-layer WCFC. Overall, our findings suggested that the use of waste cotton fiber (WCF) to prepare biocomposite with desirable physical and chemical properties is feasible, and which can potentially be used as building material, furniture and automotive applications.

Matched MeSH terms: Cotton Fiber*
Cotton fabric-based electrochemical device for lactate measurement in saliva

Malon RS, Chua KY, Wicaksono DH, Córcoles EP

Analyst, 2014 Jun 21;139(12):3009-16.
PMID: 24776756 DOI: 10.1039/c4an00201f

Lactate measurement is vital in clinical diagnostics especially among trauma and sepsis patients. In recent years, it has been shown that saliva samples are an excellent applicable alternative for non-invasive measurement of lactate. In this study, we describe a method for the determination of lactate concentration in saliva samples by using a simple and low-cost cotton fabric-based electrochemical device (FED). The device was fabricated using template method for patterning the electrodes and wax-patterning technique for creating the sample placement/reaction zone. Lactate oxidase (LOx) enzyme was immobilised at the reaction zone using a simple entrapment method. The LOx enzymatic reaction product, hydrogen peroxide (H2O2) was measured using chronoamperometric measurements at the optimal detection potential (-0.2 V vs. Ag/AgCl), in which the device exhibited a linear working range between 0.1 to 5 mM, sensitivity (slope) of 0.3169 μA mM(-1) and detection limit of 0.3 mM. The low detection limit and wide linear range were suitable to measure salivary lactate (SL) concentration, thus saliva samples obtained under fasting conditions and after meals were evaluated using the FED. The measured SL varied among subjects and increased after meals randomly. The proposed device provides a suitable analytical alternative for rapid and non-invasive determination of lactate in saliva samples. The device can also be adapted to a variety of other assays that requires simplicity, low-cost, portability and flexibility.

Matched MeSH terms: Cotton Fiber*
Fulltext Cotton bud and ear cleaning--a loose tip cotton bud?

Lee LM, Govindaraju R, Hon SK

Med J Malaysia, 2005 Mar;60(1):85-8.
PMID: 16250286

Complications that arise from self-cleaning the external ear canal are common. This is a prospective study using standard questionnaire on the practice of ear cleaning in 50 subjects. A loose tip cotton bud was also shown to them to assess if it was acceptable to replace their current cotton bud. Thirty six percent of them clean their ears by introducing an object into the ear canal once or more a day. The commonest reason to clean the ears was the presence of earwax. Only 6% used a cotton bud to mop fluid from the ear canal. Almost all (92%) the subjects used a cotton bud to clean the ear. A complication rate of 2% was noted. A loose tip cotton swab was shown to the subjects. Despite explaining that it is safer and better, only 24% of the subject were willing to change to this loose tip cotton bud. Seventy four percent of the subjects cleaned their ear regularly because of earwax. The misconception of needing to clean the ear canal by introducing an object into the ear is rampant. This practice should be avoided and health care providers can play an important role in this.

Matched MeSH terms: Cotton Fiber*
Polyethylene versus cotton cap as an adjunct to body wrap in preterm infants

Shafie H, Syed Zakaria SZ, Adli A, Shareena I, Rohana J

Pediatr Int, 2017 Jul;59(7):776-780.
PMID: 28370991 DOI: 10.1111/ped.13285

BACKGROUND: Occlusive body wrap using polyethylene plastic applied immediately after birth had been shown to reduce hypothermia among preterm infants. Various adjunct methods have been studied in an attempt to further reduce the incidence of hypothermia. This study was conducted to determine whether polyethylene cap is more effective than cotton cap as an adjunct to polyethylene occlusive body wrap in reducing hypothermia in preterm infants.
METHODS: The subjects consisted of preterm infants 24-34 weeks' gestation born at Universiti Kebangsaan Malaysia Medical Centre. Infants were randomly assigned to NeoCap or control groups. Infants in both groups were wrapped in polyethylene sheets from the neck downwards immediately after birth without prior drying. Infants in the control group had their heads dried and subsequently covered with cotton caps while infants in the NeoCap group had polyethylene caps put on without drying. Axillary temperature was measured on admission to the neonatal intensive care unit (NICU), and after having been stabilized in the incubator.
RESULTS: Among the 80 infants recruited, admission hypothermia (axillary temperature <36.5°C) was present in 37 (92.5%) and in 40 (100%) in the NeoCap and control groups, respectively. There was no significant difference in mean temperature on NICU admission between the two groups (35.3 vs 35.1°C, P = 0.36). Mean post-stabilization temperature, however, was significantly higher in the NeoCap group (36.0 vs 35.5°C, P = 0.01).
CONCLUSION: Combined use of polyethylene body wrap and polyethylene cap was associated with a significantly higher mean post-stabilization temperature compared with polyethylene body wrap and cotton cap.

Matched MeSH terms: Cotton Fiber*
Cotton fiber-based assay with time-based microfluidic absorption sampling for point-of-care applications

Wicaksono DH, Syazwani IN, Ratnarathorn N, Sadir S, Shahir S, Ruckthong L, et al.

Bioanalysis, 2019 May;11(9):855-873.
PMID: 31084195 DOI: 10.4155/bio-2018-0190

Aim: Time-based microfluidic absorption sampling was proposed using cotton fiber-based device made in swab stick. The assay was optimized and compared with conventional pipetted drop sampling using the same device. Materials & methods: Reagents were integrated into cotton fiber device for assessing concentration of analytes by the colorimetric detection method through time-based absorption sampling microfluidic system. All assay parameters were first optimized using conventional pipette-based drop sampling. Results: The color intensity is linear in the relevant concentration range of the analytes. The LOD are 0.189 mM for glucose and 6.56 μM for nitrite, respectively. These values are better than conventional drop sampling. The fiber-containing swab itself functions as sampling, assay and calibration device. Conclusion: Microfluidic cotton fiber-based assay device was fabricated and can determine analyte concentration in artificial salivary samples, colorimetrically, by time-based absorption sampling without the need of complex equipments.

Matched MeSH terms: Cotton Fiber*
Synthesis and characterization of cotton fiber-based nanocellulose

Theivasanthi T, Anne Christma FL, Toyin AJ, Gopinath SCB, Ravichandran R

Int J Biol Macromol, 2018 Apr 01;109:832-836.
PMID: 29133091 DOI: 10.1016/j.ijbiomac.2017.11.054

Nanocellulose prepared from the natural material has a promising wide range of opportunities to obtain the superior material properties towards various end-products. In this research, commercially available natural cotton was treated with aqueous sodium hydroxide solution to eliminate the hemicellulose and lignin, then cellulose was collected. The collected cellulose was subjected to acid hydrolysis using sulfuric acid to obtain nanocellulose. The prepared nanocellulose was further characterized with the aid of Fourier transform infrared spectroscopy, X-ray diffraction and Scanning Electron Microscopy to elucidate the chemical structure, crystallinity and the morphology.

Matched MeSH terms: Cotton Fiber*
Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique

Nilghaz A, Wicaksono DH, Gustiono D, Abdul Majid FA, Supriyanto E, Abdul Kadir MR

Lab Chip, 2012 Jan 7;12(1):209-18.
PMID: 22089026 DOI: 10.1039/c1lc20764d

This paper describes the fabrication of microfluidic cloth-based analytical devices (μCADs) using a simple wax patterning method on cotton cloth for performing colorimetric bioassays. Commercial cotton cloth fabric is proposed as a new inexpensive, lightweight, and flexible platform for fabricating two- (2D) and three-dimensional (3D) microfluidic systems. We demonstrated that the wicking property of the cotton microfluidic channel can be improved by scouring in soda ash (Na(2)CO(3)) solution which will remove the natural surface wax and expose the underlying texture of the cellulose fiber. After this treatment, we fabricated narrow hydrophilic channels with hydrophobic barriers made from patterned wax to define the 2D microfluidic devices. The designed pattern is carved on wax-impregnated paper, and subsequently transferred to attached cotton cloth by heat treatment. To further obtain 3D microfluidic devices having multiple layers of pattern, a single layer of wax patterned cloth can be folded along a predefined folding line and subsequently pressed using mechanical force. All the fabrication steps are simple and low cost since no special equipment is required. Diagnostic application of cloth-based devices is shown by the development of simple devices that wick and distribute microvolumes of simulated body fluids along the hydrophilic channels into reaction zones to react with analytical reagents. Colorimetric detection of bovine serum albumin (BSA) in artificial urine is carried out by direct visual observation of bromophenol blue (BPB) colour change in the reaction zones. Finally, we show the flexibility of the novel microfluidic platform by conducting a similar reaction in a bent pinned μCAD.

Matched MeSH terms: Cotton Fiber*
Effect of preparation conditions of activated carbon from bamboo waste for real textile wastewater

Ahmad AA, Hameed BH

J Hazard Mater, 2010 Jan 15;173(1-3):487-93.
PMID: 19765899 DOI: 10.1016/j.jhazmat.2009.08.111

This study deals with the use of activated carbon prepared from bamboo waste (BMAC), as an adsorbent for the removal of chemical oxygen demand (COD) and color of cotton textile mill wastewater. Bamboo waste was used to prepare activated carbon by chemical activation using phosphoric acid (H(3)PO(4)) as chemical agent. The effects of three preparation variables activation temperature, activation time and H(3)PO(4):precursor (wt%) impregnation ratio on the color and COD removal were investigated. Based on the central composite design (CCD) and quadratic models were developed to correlate the preparation variables to the color and COD. From the analysis of variance (ANOVA), the most influential factor on each experimental design response was identified. The optimum condition was obtained by using temperature of 556 degrees C, activation time of 2.33 h and chemical impregnation ratio of 5.24, which resulted in 93.08% of color and 73.98% of COD.

Matched MeSH terms: Cotton Fiber
Fulltext Isolation of Acanthamoeba sp. from conjunctival sac of healthy individuals using swab

Anisah N, Amal H, Kamel AG, Yusof S, Noraina AR, Norhayati M

Trop Biomed, 2005 Jun;22(1):11-4.
PMID: 16880749 MyJurnal

Is Acanthamoeba sp. normally found in the eyes? A study was carried out to establish the possibility of Acanthamoeba sp. as a part of the normal conjunctival flora. Conjunctiva swabbing were carried out in 286 healthy Orang Asli school children using sterile cotton swab. The swab was then inoculated onto non-nutrient agar (NN-A). Heat killed Escherichia coli that was used as food source for the growth of the amoebae was pipetted onto and away from the smear. The plates were incubated at 30 degrees C and examined daily using an inverted microscope for 14 days. Morphology of the trophozoites and cysts of the amoebae were used as the taxonomic criteria for identification. Positive-controls and negative-controls were done to check for the consistency of the technique used and monitoring of contamination respectively. None of the conjunctiva swab cultured was positive for Acanthamoeba sp. This finding may indicate that Acanthamoeba sp. is not part of normal conjunctival flora or conjunctiva swab is an insensitive technique to isolate the organism. However, a more extensive research is needed to investigate these possibilities.

Matched MeSH terms: Cotton Fiber
Revalorization of selected municipal solid wastes as new precursors of "green" nanocellulose via a novel one-pot isolation system: A source perspective

Chen YW, Lee HV

Int J Biol Macromol, 2018 Feb;107(Pt A):78-92.
PMID: 28860064 DOI: 10.1016/j.ijbiomac.2017.08.143

In the present work, four types of newly chosen municipal solid wastes (Panax ginseng, spent tea residue, waste cotton cloth, and old corrugated cardboard) were studied as the promising sources for nanocellulose, which has efficiently re-engineered the structure of waste products into highly valuable nanocellulose materials. The nanocellulose was produced directly via a facile one-pot oxidative hydrolysis process by using H2O2/Cr(NO3)3 solution as the bleaching agent and hydrolysis medium under acidic condition. The isolated nanocellulose products were well-characterized in terms of chemical composition, product yield, morphological structure and thermal properties. The study has found that the crystallinity index of the obtained nanocellulose products were significantly higher (62.2-83.6%) than that of its starting material due to the successive elimination of lignin, hemicellulose and amorphous regions of cellulose, which were in good agreement with the FTIR analysis. The evidence of the successful production of nanocellulose was given by TEM observation which has revealed the fibril widths were ranging from 15.6 to 46.2nm, with high cellulose content (>90%), depending on the cellulosic origin. The physicochemical properties of processed samples have confirmed that the isolation of high purity nanocellulose materials from different daily spent products is possible. The comparative study can help to provide a deep insight on the possibility of revalorizing the municipal solid wastes into nanocellulose via the simple and versatile one-pot isolation system, which has high potential to be used in commercial applications for sustainable development.

Matched MeSH terms: Cotton Fiber
Reduction of COD and color of dyeing effluent from a cotton textile mill by adsorption onto bamboo-based activated carbon

Ahmad AA, Hameed BH

J Hazard Mater, 2009 Dec 30;172(2-3):1538-43.
PMID: 19740605 DOI: 10.1016/j.jhazmat.2009.08.025

In this work, activated carbon was prepared from bamboo waste by chemical activation method using phosphoric acid as activating agent. The activated carbon was evaluated for chemical oxygen demand (COD) and color reduction of a real textile mill effluent. A maximum reduction in color and COD of 91.84% and 75.21%, respectively was achieved. As a result, the standard B discharge limit of color and COD under the Malaysian Environmental Quality act 1974 was met. The Freundlich isotherm model was found best to describe the obtained equilibrium adsorption data at 30 degrees C. The Brunauer-Emmett-Teller (BET) surface area, total pore volume and the average pore diameter were 988.23 m(2)/g, 0.69 cm(3)/g and 2.82 nm, respectively. Various functional groups on the prepared bamboo activated carbon (BAC) were determined from the FTIR results.

Matched MeSH terms: Cotton Fiber

Filters

Please provide feedback to Administrator ([email protected])

External Links