Displaying all 15 publications

Abstract:
Sort:
  1. Santos GP, Miranda BM, Di-Medeiros MCB, Almeida VO, Ferreira RD, Morais DAB, et al.
    Carbohydr Res, 2024 Jan;535:109008.
    PMID: 38103463 DOI: 10.1016/j.carres.2023.109008
    This work presents the characterization of a novel naturally phosphorylated starch extracted from an unconventional and non-utilized source, the seeds of the stone fruit Syzygium malaccense. The morphology and chemical characteristics of the extracted starch were examined by scanning electron microscopy, FTIR, 1H/13C/31P NMR and 13C-CP/MAS-NMR, HPAEC-PAD chromatography, XRD, DSC, and RVA. The extraction yielded a highly pure starch (95.6 %) with an average granule size of 13 μm. The analysis of the starch components revealed an amylose content of 28.1 % and a predominance (65 %) of B-chains (B1-B3 65 %) in the amylopectin, as shown through HPAEC-PAD chromatography. The X-ray diffractogram was compatible with B-type starch, which was confirmed by the deconvolution of the C1 peak in the 13C-CP/MAS-NMR. X-Ray diffractogram also showed that S. malaccense has 28.5 % of crystallinity. DSC analysis showed values of 82.6 °C and -12.41 J g-1 for Tc and ΔH, respectively, which is compatible with a highly ordered starch granule structure. The values observed for peak (4678 mPa•s), trough (3055 mPa•s), and final viscosity (6526 mPa•s) indicated that S. malaccense may be used as a thickener in hot food.
    Matched MeSH terms: Amylopectin/chemistry
  2. Chung KH, Othman Z, Lee JS
    J Food Sci Technol, 2015 Oct;52(10):6218-29.
    PMID: 26396368 DOI: 10.1007/s13197-014-1700-4
    Corn starches with different amylose-to-amylopectin ratio (waxy, normal, Hylon V, and Hylon VII) were treated with five doses of gamma irradiation (1, 5, 10, 25, and 50 kGy). The effects of gamma irradiation on the physicochemical properties of starch samples were investigated. Waxy samples showed an increase of amylose-like fractions when irradiated at 10 kGy. The reduction in apparent amylose content increased with amylose content when underwent irradiation at 25 and 50 kGy. Low amylose starches lost their pasting ability when irradiated at 25 and 50 kGy. Results from thermal behavior and pasting profile suggested that low level of cross-linking occurred in Hylon VII samples irradiated at 5 kGy. Severe reduction in pasting properties, gelatinization temperatures and relative crystallinity with increasing irradiation intensity revealed that waxy samples were affected more by gamma irradiation; this also indicated amylopectin was the starch fraction most affected by gamma irradiation. Alteration level was portrayed differently when different kind of physicochemical properties were investigated, in which the pasting properties and crystallinity of starches were more immensely influenced by gamma irradiation while thermal behavior was less affected. Despite the irradiation level, the morphology and crystal pattern of starch granules were found remain unchanged by irradiation.
    Matched MeSH terms: Amylopectin
  3. Zhang, Q., Ismail, N., Cheng, L.H.
    MyJurnal
    Chicken breast muscle powder (CBMP) was treated as a function of heating temperature, heating time and amount of alkali added. The pre-treated CBMP was then blended with modified waxy corn starch (MWCS) and characterized by flow analysis and temperature sweep. Flow analysis revealed that the blend behaved as a shear thickening and time dependent fluid with a yield stress. Statistical analysis showed that only linear and quadratic effects of heating temperature and heating time caused significant effects on flow behaviour index, consistency index and yield stress (p
    Matched MeSH terms: Amylopectin
  4. Mar NN, Umemoto T, Ismail M, Abdullah SN, Maziah M
    J Sci Food Agric, 2013 Jan 15;93(1):110-7.
    PMID: 22821180 DOI: 10.1002/jsfa.5737
    Characterization of starch properties and functionality can apply breeding program selection for desirable traits such as eating, cooking and processing qualities to meet consumer preference. Low amylose content is generally preferred in Malaysia because of cohesive, tender and glossy cooked rice. Rice high in short-chain amylopectin has a lower transition temperature of starch gelatinization. In the continuing search for improved starch quality in rice cultivars a study was carried out with new mutant lines MR219-4 and MR219-9, derived from MR219.
    Matched MeSH terms: Amylopectin/genetics*; Amylopectin/chemistry
  5. Zaman SA, Sarbini SR
    Crit Rev Biotechnol, 2016 Jun;36(3):578-84.
    PMID: 25582732 DOI: 10.3109/07388551.2014.993590
    Resistant starch is defined as the total amount of starch and the products of starch degradation that resists digestion in the small intestine. Starches that were able to resist the digestion will arrive at the colon where they will be fermented by the gut microbiota, producing a variety of products which include short chain fatty acids that can provide a range of physiological benefits. There are several factors that could affect the resistant starch content of a carbohydrate which includes the starch granule morphology, the amylose-amylopectin ratio and its association with other food component. One of the current interests on resistant starch is their potential to be used as a prebiotic, which is a non-digestible food ingredient that benefits the host by stimulating the growth or activity of one or a limited number of beneficial bacteria in the colon. A resistant starch must fulfill three criterions to be classified as a prebiotic; resistance to the upper gastrointestinal environment, fermentation by the intestinal microbiota and selective stimulation of the growth and/or activity of the beneficial bacteria. The market of prebiotic is expected to reach USD 198 million in 2014 led by the export of oligosaccharides. Realizing this, novel carbohydrates such as resistant starch from various starch sources can contribute to the advancement of the prebiotic industry.
    Matched MeSH terms: Amylopectin
  6. Shukri R, Alavi S, Dogan H, Shi YC
    Carbohydr Polym, 2021 Feb 01;253:117259.
    PMID: 33278941 DOI: 10.1016/j.carbpol.2020.117259
    The objectives of this study were to study the extrusion of cross-linked waxy maize starches (CLWMS) with different cross-linking levels and their function as a secondary ingredient in extruded oat flour (OF) formulations. CLWMS (18 %) and OF (82 %) were hydrated to 20 % moisture content and subjected to twin-screw extrusion at the screw speed of 350 rpm. Low cross-linking level of CLWMS (0.05 % sodium trimetaphosphate/sodium tripolyphosphate) in OF formulation increased the void fraction and reduced the breaking strength of extrudates. The low cross-linked starch was more resistant to breakdown and had a higher pasting viscosity than the unmodified starch. Higher cross-linking levels of CLWMS restricted swelling of starch granule and increased the resistant starch level of OF formulation but had very poor structural and textural properties. Varying the level of cross-linking offers an alternative way to manipulate the structural, textural and nutritional properties of extrudates in snack and cereal applications.
    Matched MeSH terms: Amylopectin
  7. Mohd Adzahan, N., Mat Hashim, D., Muhammad, K., Abdul Rahman, R., Ghazali, Z., Hashim, K.
    MyJurnal
    Changes to the physicochemical properties of wheat, sago and tapioca starches subjected to gamma ray, electron beam and microwave irradiations and the conditions that lead to wheat starch having leaching behaviour similar to sago or tapioca starch were studied. The properties were characterised through swelling and leaching behaviours of the starch granules and retrogradation following pasting. The leaching of wheat starch increased tremendously and resulted in amylose to amylopectin ratios in the leachate similar to that of native sago and tapioca starches. This observation is significant as wheat starch is known to have a leachate composition of mostly amylose. This opens up the possibility of utilising wheat starch in snacks where tapioca and sago starch are commonly used. It was observed that the required conditions for such changes were exposure to microwave for 8 and 10 minutes, electron beam at 5 and 10 kGy and gamma ray at 5 kGy.
    Matched MeSH terms: Amylopectin
  8. Akanbi, T.O., Nazamid, S., Adebowale, A.A.
    MyJurnal
    This study was carried out to determine the proximate, functional and pasting properties of breadfruit starch. Breadfruit starch was isolated from matured breadfruit (Artocarpus altilis) and was analyzed for its fuctional, proximate and pasting properties. The starch contains 10.83%, 0.53%, 0.39%, 22.52%, 77.48% and 1.77% moisture, crude protein, fat, amylose, amylopectin and ash contents respectively. The average particle size, pH, bulk density and dispersibility of the breadfruit starch were 18 μm, 6.5, 0.673 g/mls, and 40.67% respectively. The swelling power of the breadfruit starch increases with increase in temperature, but there was a rapid increase in the swelling power from 70 to 80 0C. The pasting temperature of the starch paste was 84.05 0C, setback and breakdown values were 40.08 and 7.92 RVU respectively. The peak viscosity value was 121.25 RVU while final viscosity value was 153.42 RVU. This study concluded that breadfruit starch has an array of functional, pasting and proximate properties that can facilitate its use in so many areas where the properties of other starches are acceptable.
    Matched MeSH terms: Amylopectin
  9. Elgadir MA, Bakar J, Zaidul ISM, Rahman RA, Abbas KA, Hashim DM, et al.
    Compr Rev Food Sci Food Saf, 2009 Jul;8(3):195-201.
    PMID: 33467796 DOI: 10.1111/j.1541-4337.2009.00078.x
      This review article highlights the thermal behaviors of selected starches that were studied using differential scanning calorimetery (DSC) with data shown in various research publications. The starches of sago, potato, sweet potato, cassava, yam, and corn are included in this overview. Our examinations indicate that thermal properties are highly affected by the type of starch, its amylose/amylopectin content, and the presence of other food ingredients such as sugar, sodium chloride, water, milk, hydrocolloids, and meat. When the heating temperatures of the starches were increased, the DSC measurements also showed an increase in the temperatures of the gelatinization (onset [To ], peak [Tp ], and conclusion [Tc ]). This may be attributed to the differences in the degree of crystallinity of the starch, which provides structural stability and makes the granule more resistant to gelatinization.
    Matched MeSH terms: Amylopectin
  10. Syed FNN, Zakaria MH, Bujang JS, Christianus A
    Int J Food Sci, 2021;2021:8825970.
    PMID: 33553420 DOI: 10.1155/2021/8825970
    Several aquatic macrophytes such as Colocasia esculenta, Eleocharis dulcis, Nelumbo nucifera, Sagittaria sagittifolia, Trapa bispinosa, and Typha angustifolia possessed carbohydrate mainly in their storage and reproductive parts. Starch morphology, total starch, and amylose content of these six freshwater plant species were determined. Their functional properties, i.e., starch crystallinity, thermal properties, and rheological behaviour were assessed. Large starch granules were in N. nucifera rhizome (>15 μm), medium-sized was N. nucifera seed (8-18 μm), while the rest of the starches were small starch granules (<8 μm). Shapes of the starch granules varied from oval and irregular with centric hilum to elongated granules with the eccentric hilum. Eleocharis dulcis corm starch had significantly higher total starch content (90.87%), followed by corms of C. esculenta (82.35%) and S. sagittifolia (71.71%). Nelumbo nucifera seed starch had significantly higher amylose content (71.45%), followed by T. angustifolia pollen (36.47%). In comparison, the waxy starch was in N. nucifera rhizome (7.63%), T. bispinosa seed (8.83%), C. esculenta corm (10.61%), and T. angustifolia rhizome (13.51%). Higher resistant starch was observed mostly in rhizomes of N. nucifera (39.34%)>T. angustifolia (37.19%) and corm parts of E. dulcis (37.41%)>S. sagittifolia (35.09%) compared to seed and pollen starches. The XRD profiles of macrophytes starches displayed in all the corms and N. nucifera seed had A-type crystallinity. The T. bispinosa seed had CA-type, whereas the rest of the starches exhibited CB-type crystallinity. Waxy starches of C. esculenta corm had higher relative crystallinity (36.91%) and viscosity (46.2 mPa s) than regular starches. Based on thermal properties, high-amylose of N. nucifera seed and T. angustifolia pollen resulted in higher gelatinization enthalpy (19.93 and 18.66 J g-1, respectively). Starch properties showed equally good potential as commercial starches in starch-based food production based on their starch properties and functionality.
    Matched MeSH terms: Amylopectin
  11. Noranizan, M.A., Dzulkifly, M.H., Russly, A.R.
    MyJurnal
    Changes in the physicochemical properties of wheat, sago, tapioca and potato starches were studied
    after heating for 1 hour at 100oC, 110oC, and 120oC and for 2 hours at 120oC. These properties were characterised through the swelling behaviour of starch granules, amount of carbohydrate materials leached from the granules, starch paste retrogradation rate and gel strength. For all starches except wheat, the swelling ability, rate of retrogradation and gel strength decreased while solubility increased with increasing temperature and heating time. Wheat starch followed this pattern only when heated at 120oC for 1 and 2 hours. Gel strength correlated well with the ratio of amylose to amylopectin (R) in the leachate. To produce fried crackers with good expansion properties, the granule has to be sufficiently degraded so as to allow more amylopectin to be leached out to achieve R value of 0.25-0.5. This can be achieved by heating wheat starch at 120oC for 1 hour or longer.
    Matched MeSH terms: Amylopectin
  12. Li S, Li C, Yang Y, He X, Zhang B, Fu X, et al.
    Food Chem, 2019 Jun 15;283:437-444.
    PMID: 30722895 DOI: 10.1016/j.foodchem.2019.01.020
    The present study aimed at investigating the effects of octenylsuccinylation and particle size on the emulsifying properties of starch granules as Pickering emulsifiers. Starch spherulites (1-5 μm), native rice starch (5-10 μm), waxy maize starch (10-20 μm) and waxy potato starch (20-30 μm) were modified with octenylsuccinic anhydride. Results showed that octenylsuccinylation caused a significant increase in the contact angle, and there was a weak positive linear correlation with the emulsifying capacity of the starch granules. After octenylsuccinylation, smaller particles of octenylsuccinate-starch granules exhibited better emulsifying properties with smaller droplet size and lower creaming index. Overall, both octenylsuccinylation and particle size have important effects on the emulsifying properties of starch granules as Pickering stabilizers. This study could be useful in the design and development of starch-based Pickering emulsifiers, and provide potential applications in the food and pharmaceutical industries.
    Matched MeSH terms: Amylopectin
  13. Choy SY, Prasad KM, Wu TY, Raghunandan ME, Yang B, Phang SM, et al.
    Environ Sci Pollut Res Int, 2017 Jan;24(3):2876-2889.
    PMID: 27838910 DOI: 10.1007/s11356-016-8024-z
    Fruit wastes constituting up to half of total fruit weight represent a large pool of untapped resources for isolation of starch with diverse applications. In this work, the possibility of isolating starch from tropical fruit wastes and its extended application as a natural coagulant was elucidated. Amongst the 12 various parts of fruit wastes selected, only jackfruit seeds contained more than 50% of total starch content. Using alkaline extraction procedures, starch has been successfully isolated from local jackfruit seeds with a yield of approximately 18%. Bell-shaped starch granules were observed under SEM with a granule size ranging from 1.1 to 41.6 μm. Detailed starch characteristics were performed to provide a comparison between the isolated seed starch and also conventional starches. Among them, chemical properties such as the content of starch, amylose, amylopectin and the corresponding molecular weights are some of the key characteristics which governed their performance as natural coagulants. The potential use of isolated seed starch as an aid was then demonstrated in both suspensions of kaolin (model synthetic system) and Chlorella sp. microalga (real-time application) with plausible outcomes. At optimized starch dosage of 60 mg/L, the overall turbidity removal in kaolin was enhanced by at least 25% at a fixed alum dosage of 2.1 mg/L. Positive turbidity and COD removals were also observed in the treatment of Chlorella suspensions. Starches which served as bridging agents aided in the linkage of neighbouring microflocs and subsequently, forming macroflocs through a secondary coagulation mechanism: adsorption and bridging.
    Matched MeSH terms: Amylopectin
  14. Amirul AA, Khoo SL, Nazalan MN, Razip MS, Azizan MN
    Folia Microbiol (Praha), 1996;41(2):165-74.
    PMID: 9138312
    A. niger produced alpha-glucosidase, alpha-amylase and two forms of glucoamylase when grown in a liquid medium containing raw tapioca starch as the carbon source. The glucoamylases, which formed the dominant components of amylolytic activity manifested by the organism, were purified to homogeneity by ammonium sulfate precipitation, ion-exchange and two cycles of gel filtration chromatography. The purified enzymes, designated GA1 and GA2, a raw starch digesting glucoamylase, were found to have molar masses of 74 and 96 kDa and isoelectric points of 3.8 and 3.95, respectively. The enzymes were found to have pH optimum of 4.2 and 4.5 for GA1 and GA2, respectively, and were both stable in a pH range of 3.5-9.0. Both enzymes were thermophilic in nature with temperature optimum of 60 and 65 degrees C, respectively, and were stable for 1 h at temperatures of up to 60 degrees C. The kinetic parameters Km and V showed that with both enzymes the branched substrates, starch and amylopectin, were more efficiently hydrolyzed compared to amylose. GA2, the more active of the two glucoamylases produced, was approximately six to thirteen times more active towards raw starches compared to GA1.
    Matched MeSH terms: Amylopectin/metabolism
  15. Seow EK, Tan TC, Lee LK, Easa AM
    J Texture Stud, 2020 12;51(6):909-916.
    PMID: 32537814 DOI: 10.1111/jtxs.12544
    Hardening issue in starch-based products that arises during storage, is ascribed to the long-term starch retrogradation which involves the recrystallisation of amylopectin. Present study aimed to delay storage hardening with the addition of high diastase honey bee honey (HBH) and low diastase kelulut bee honey (KBH) into glutinous rice flour (GRF) gels. As compared to KBH, retardation of texture deterioration by HBH was more prominent as evidenced by the significantly (p 
    Matched MeSH terms: Amylopectin
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links