Displaying publications 1 - 20 of 89 in total

Abstract:
Sort:
  1. Fulltext Improved maturity and ripeness classifications of Magnifera Indica cv. Harumanis mangoes through sensor fusion of an electronic nose and acoustic sensor
    Zakaria A, Shakaff AY, Masnan MJ, Saad FS, Adom AH, Ahmad MN, et al.
    Sensors (Basel), 2012;12(5):6023-48.
    PMID: 22778629 DOI: 10.3390/s120506023
    In recent years, there have been a number of reported studies on the use of non-destructive techniques to evaluate and determine mango maturity and ripeness levels. However, most of these reported works were conducted using single-modality sensing systems, either using an electronic nose, acoustics or other non-destructive measurements. This paper presents the work on the classification of mangoes (Magnifera Indica cv. Harumanis) maturity and ripeness levels using fusion of the data of an electronic nose and an acoustic sensor. Three groups of samples each from two different harvesting times (week 7 and week 8) were evaluated by the e-nose and then followed by the acoustic sensor. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were able to discriminate the mango harvested at week 7 and week 8 based solely on the aroma and volatile gases released from the mangoes. However, when six different groups of different maturity and ripeness levels were combined in one classification analysis, both PCA and LDA were unable to discriminate the age difference of the Harumanis mangoes. Instead of six different groups, only four were observed using the LDA, while PCA showed only two distinct groups. By applying a low level data fusion technique on the e-nose and acoustic data, the classification for maturity and ripeness levels using LDA was improved. However, no significant improvement was observed using PCA with data fusion technique. Further work using a hybrid LDA-Competitive Learning Neural Network was performed to validate the fusion technique and classify the samples. It was found that the LDA-CLNN was also improved significantly when data fusion was applied.
    Matched MeSH terms: Acoustics*
  2. Fulltext An analytical model for computing the sound power of an unbraced irregular-shaped plate of variable thickness
    Lee MK, Hosseini Fouladi M, Narayana Namasivayam S
    Sci Rep, 2018 Oct 18;8(1):15355.
    PMID: 30337652 DOI: 10.1038/s41598-018-33645-y
    An irregular-shaped plate with dimensions identical to a guitar soundboard is chosen for this study. It is well known that the classical guitar soundboard is a major contributor to acoustic radiation at high frequencies when compared to the bridge and sound hole. This paper focuses on using an analytical model to compute the sound power of an unbraced irregular-shaped plate of variable thickness up to frequencies of 5 kHz. The analytical model is an equivalent thin rectangular plate of variable thickness. Sound power of an irregular-shaped plate of variable thickness and with dimensions of an unbraced Torres' soundboard is determined from computer analysis using ANSYS. The number of acoustic elements used in ANSYS for accurate simulation is six elements per wavelength. Here we show that the analytical model can be used to compute sound power of an unbraced irregular-shaped plate of variable thickness.
    Matched MeSH terms: Acoustics
  3. Fulltext CoSiM-RPO: Cooperative Routing with Sink Mobility for Reliable and Persistent Operation in Underwater Acoustic Wireless Sensor Networks
    Ali M, Khan A, Aurangzeb K, Ali I, Mahmood H, Haider SI, et al.
    Sensors (Basel), 2019 Mar 04;19(5).
    PMID: 30836710 DOI: 10.3390/s19051101
    An efficient algorithm for the persistence operation of data routing is crucial due to the uniqueness and challenges of the aqueous medium of the underwater acoustic wireless sensor networks (UA-WSNs). The existing multi-hop algorithms have a high energy cost, data loss, and less stability due to many forwarders for a single-packet delivery. In order to tackle these constraints and limitations, two algorithms using sink mobility and cooperative technique for UA-WSNs are devised. The first one is sink mobility for reliable and persistence operation (SiM-RPO) in UA-WSNs, and the second is the enhanced version of the SiM-RPO named CoSiM-RPO, which utilizes the cooperative technique for better exchanging of the information and minimizes data loss probability. To cover all of the network through mobile sinks (MSs), the division of the network into small portions is accomplished. The path pattern is determined for MSs in a manner to receive data even from a single node in the network. The MSs pick the data directly from the nodes and check them for the errors. When erroneous data are received at the MS, then the relay cooperates to receive correct data. The proposed algorithm boosts the network lifespan, throughput, delay, and stability more than the existing counterpart schemes.
    Matched MeSH terms: Acoustics
  4. Fulltext Resonant frequency characteristics of a SAW device attached to resonating micropillars
    Ramakrishnan N, Nemade HB, Palathinkal RP
    Sensors (Basel), 2012;12(4):3789-97.
    PMID: 22666001 DOI: 10.3390/s120403789
    Recently we reported experimental and simulation results on an increase in resonance frequency of a SAW resonator caused by mass loading of micropillars made of SU-8, attached normal to the surface of the resonator. We concluded that SAW resonator and the SU-8 micropillars in unison form a system of coupled resonators. We have now extended this work and performed a finite element method simulation to study the resonance frequency characteristics of the SAW-based coupled resonator. In this paper we report the effect of the resonance frequency of the micropillars on the resonance frequency of the system of coupled resonators, and observe the coupling of micropillar resonance and the propagating SAW as described in the well known Dybwad system of coupled resonators.
    Matched MeSH terms: Acoustics
  5. Fulltext Assessment of Reinforced Concrete Surface Breaking Crack Using Rayleigh Wave Measurement
    Lee FW, Chai HK, Lim KS
    Sensors (Basel), 2016;16(3).
    PMID: 26959028 DOI: 10.3390/s16030337
    An improved single sided Rayleigh wave (R-wave) measurement was suggested to characterize surface breaking crack in steel reinforced concrete structures. Numerical simulations were performed to clarify the behavior of R-waves interacting with surface breaking crack with different depths and degrees of inclinations. Through analysis of simulation results, correlations between R-wave parameters of interest and crack characteristics (depth and degree of inclination) were obtained, which were then validated by experimental measurement of concrete specimens instigated with vertical and inclined artificial cracks of different depths. Wave parameters including velocity and amplitude attenuation for each case were studied. The correlations allowed us to estimate the depth and inclination of cracks measured experimentally with acceptable discrepancies, particularly for cracks which are relatively shallow and when the crack depth is smaller than the wavelength.
    Matched MeSH terms: Acoustics
  6. Fulltext Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique
    Zaki A, Chai HK, Aggelis DG, Alver N
    Sensors (Basel), 2015;15(8):19069-101.
    PMID: 26251904 DOI: 10.3390/s150819069
    Corrosion of reinforced concrete (RC) structures has been one of the major causes of structural failure. Early detection of the corrosion process could help limit the location and the extent of necessary repairs or replacement, as well as reduce the cost associated with rehabilitation work. Non-destructive testing (NDT) methods have been found to be useful for in-situ evaluation of steel corrosion in RC, where the effect of steel corrosion and the integrity of the concrete structure can be assessed effectively. A complementary study of NDT methods for the investigation of corrosion is presented here. In this paper, acoustic emission (AE) effectively detects the corrosion of concrete structures at an early stage. The capability of the AE technique to detect corrosion occurring in real-time makes it a strong candidate for serving as an efficient NDT method, giving it an advantage over other NDT methods.
    Matched MeSH terms: Acoustics
  7. Fulltext Asthma severity identification from pulmonary acoustic signal for computerized decision support system
    Nabi FG, Sundaraj K, Lam CK
    J Pak Med Assoc, 2021 Jan;71(1(A)):41-46.
    PMID: 33484516 DOI: 10.47391/JPMA.156
    OBJECTIVE: Breath sound has information about underlying pathology and condition of subjects. The purpose of this study was to examine asthmatic acuteness levels (Mild, Moderate, Severe) using frequency features extracted from wheeze sounds. Further, analysis was extended to observe behaviour of wheeze sounds in different datasets.

    METHODS: Segmented and validated wheeze sounds was collected from 55 asthmatic patients from the trachea and lower lung base (LLB) during tidal breathing maneuvers. Segmented wheeze sounds have been grouped in to nine datasets based on auscultation location, breath phases and a combination of phase and location. Frequency based features F25, F50, F75, F90, F99 and mean frequency (MF) were calculated from normalized power spectrum. Subsequently, multivariate analysis was performed.

    RESULTS: Generally frequency features observe statistical significance (p < 0.05) for the majority of datasets to differentiate severity level Ʌ = 0.432-0.939, F(12, 196-1534) = 2.731-11.196, p < 0.05, ɳ2 = 0.061-0.568. It was observed that selected features performed better (higher effect size) for trachea related samples Ʌ = 0.432-0.620, F(12, 196-498) = 6.575-11.196, p < 0.05, ɳ2 = 0.386-0.568.

    CONCLUSIONS: The results demonstrated dthat severity levels of asthmatic patients with tidal breathing can be identified through computerized wheeze sound analysis. In general, auscultation location and breath phases produce wheeze sounds with different characteristics.

    Matched MeSH terms: Acoustics
  8. Beamforming technique for investigation of lateral variability at geotechnical sites
    Norfarah Nadia Ismail, Joh SH, Raja Hassanul Musa Raja Ahmad
    Sains Malaysiana, 2012;41:1621-1627.
    A beamformer in seismology is a signal receptor with a series of geophones, in which a beam of elastic waves is formed like a light beam by adjusting signal delays at individual geophones. Recently, beamforming has extended its applications to surface-wave measurement. In surface-wave measurement, beamforming provides unique advantages over other surface-wave methods, such as full automation in data analysis as well as directional signal reception to minimize scattered noise and multiple reflections in signals. However, certain defects depreciate the value of beamforming in terms of its practicality and feasibility. These include the requirement of having many receivers and the loss of small wavelength data due to spatial aliasing. It leads to insensitivity in identification of lateral variability, which creates the problem of having to smooth out geologic features and complexities like folding, faults and fractures. In this paper, advances in the refinement of beamforming were described on two counts: improvement of sensitivity in identification of lateral variability and recovery of aliased wave numbers, which enables evaluation of shallow material. On the passage to refinement, synthetic waveforms for typical layering systems were generated to figure out characteristics of beamformer velocities in comparison with SASW velocities and theoretical normal-mode velocities.
    Matched MeSH terms: Acoustics
  9. Fulltext Integrating multibeam backscatter angular response, mosaic and bathymetry data for benthic habitat mapping
    Che Hasan R, Ierodiaconou D, Laurenson L, Schimel A
    PLoS One, 2014;9(5):e97339.
    PMID: 24824155 DOI: 10.1371/journal.pone.0097339
    Multibeam echosounders (MBES) are increasingly becoming the tool of choice for marine habitat mapping applications. In turn, the rapid expansion of habitat mapping studies has resulted in a need for automated classification techniques to efficiently map benthic habitats, assess confidence in model outputs, and evaluate the importance of variables driving the patterns observed. The benthic habitat characterisation process often involves the analysis of MBES bathymetry, backscatter mosaic or angular response with observation data providing ground truth. However, studies that make use of the full range of MBES outputs within a single classification process are limited. We present an approach that integrates backscatter angular response with MBES bathymetry, backscatter mosaic and their derivatives in a classification process using a Random Forests (RF) machine-learning algorithm to predict the distribution of benthic biological habitats. This approach includes a method of deriving statistical features from backscatter angular response curves created from MBES data collated within homogeneous regions of a backscatter mosaic. Using the RF algorithm we assess the relative importance of each variable in order to optimise the classification process and simplify models applied. The results showed that the inclusion of the angular response features in the classification process improved the accuracy of the final habitat maps from 88.5% to 93.6%. The RF algorithm identified bathymetry and the angular response mean as the two most important predictors. However, the highest classification rates were only obtained after incorporating additional features derived from bathymetry and the backscatter mosaic. The angular response features were found to be more important to the classification process compared to the backscatter mosaic features. This analysis indicates that integrating angular response information with bathymetry and the backscatter mosaic, along with their derivatives, constitutes an important improvement for studying the distribution of benthic habitats, which is necessary for effective marine spatial planning and resource management.
    Matched MeSH terms: Acoustics*
  10. Acoustic characteristics of vowels by normal Malaysian Malay young adults
    Ting HN, Chia SY, Abdul Hamid B, Mukari SZ
    J Voice, 2011 Nov;25(6):e305-9.
    PMID: 21429707 DOI: 10.1016/j.jvoice.2010.05.007
    The acoustic characteristics of sustained vowel have been widely investigated across various languages and ethnic groups. These acoustic measures, including fundamental frequency (F(0)), jitter (Jitt), relative average perturbation (RAP), five-point period perturbation quotient (PPQ5), shimmer (Shim), and 11-point amplitude perturbation quotient (APQ11) are not well established for Malaysian Malay young adults. This article studies the acoustic measures of Malaysian Malay adults using acoustical analysis. The study analyzed six sustained Malay vowels of 60 normal native Malaysian Malay adults with a mean of 21.19 years. The F(0) values of Malaysian Malay males and females were reported as 134.85±18.54 and 238.27±24.06Hz, respectively. Malaysian Malay females had significantly higher F(0) than that of males for all the vowels. However, no significant differences were observed between the genders for the perturbation measures in all the vowels, except RAP in /e/. No significant F(0) differences between the vowels were observed. Significant differences between the vowels were reported for all perturbation measures in Malaysian Malay males. As for Malaysian Malay females, significant differences between the vowels were reported for Shim and APQ11. Multiethnic comparisons indicate that F(0) varies between Malaysian Malay and other ethnic groups. However, the perturbation measures cannot be directly compared, where the measures vary significantly across different speech analysis softwares.
    Matched MeSH terms: Speech Acoustics*
  11. Fundamental frequency and perturbation measures of sustained vowels in Malaysian Malay children between 7 and 12 years old
    Ting HN, Chia SY, Manap HH, Ho AH, Tiu KY, Abdul Hamid B
    J Voice, 2012 Jul;26(4):425-30.
    PMID: 22243972 DOI: 10.1016/j.jvoice.2011.07.001
    The study is going to investigate the fundamental frequency (F(0)) and perturbation measures of sustained vowels in 360 native Malaysian Malay children aged between 7 and 12 years using acoustical analysis.
    Matched MeSH terms: Speech Acoustics*
  12. Normal and hypoacoustic infant cry signal classification using time-frequency analysis and general regression neural network
    Hariharan M, Sindhu R, Yaacob S
    Comput Methods Programs Biomed, 2012 Nov;108(2):559-69.
    PMID: 21824676 DOI: 10.1016/j.cmpb.2011.07.010
    Crying is the most noticeable behavior of infancy. Infant cry signals can be used to identify physical or psychological status of an infant. Recently, acoustic analysis of infant cry signal has shown promising results and it has been proven to be an excellent tool to investigate the pathological status of an infant. This paper proposes short-time Fourier transform (STFT) based time-frequency analysis of infant cry signals. Few statistical features are derived from the time-frequency plot of infant cry signals and used as features to quantify infant cry signals. General Regression Neural Network (GRNN) is employed as a classifier for discriminating infant cry signals. Two classes of infant cry signals are considered such as normal cry signals and pathological cry signals from deaf infants. To prove the reliability of the proposed features, two neural network models such as Multilayer Perceptron (MLP) and Time-Delay Neural Network (TDNN) trained by scaled conjugate gradient algorithm are also used as classifiers. The experimental results show that the GRNN classifier gives very promising classification accuracy compared to MLP and TDNN and the proposed method can effectively classify normal and pathological infant cries.
    Matched MeSH terms: Acoustics*
  13. Fulltext Acoustic communication at the water's edge: evolutionary insights from a mudskipper
    Polgar G, Malavasi S, Cipolato G, Georgalas V, Clack JA, Torricelli P
    PLoS One, 2011;6(6):e21434.
    PMID: 21738663 DOI: 10.1371/journal.pone.0021434
    Coupled behavioural observations and acoustical recordings of aggressive dyadic contests showed that the mudskipper Periophthalmodon septemradiatus communicates acoustically while out of water. An analysis of intraspecific variability showed that specific acoustic components may act as tags for individual recognition, further supporting the sounds' communicative value. A correlative analysis amongst acoustical properties and video-acoustical recordings in slow-motion supported first hypotheses on the emission mechanism. Acoustic transmission through the wet exposed substrate was also discussed. These observations were used to support an "exaptation hypothesis", i.e. the maintenance of key adaptations during the first stages of water-to-land vertebrate eco-evolutionary transitions (based on eco-evolutionary and palaeontological considerations), through a comparative bioacoustic analysis of aquatic and semiterrestrial gobiid taxa. In fact, a remarkable similarity was found between mudskipper vocalisations and those emitted by gobioids and other soniferous benthonic fishes.
    Matched MeSH terms: Acoustics*
  14. Fulltext Investigation into mass loading sensitivity of sezawa wave mode-based surface acoustic wave sensors
    Mohanan AA, Islam MS, Ali SH, Parthiban R, Ramakrishnan N
    Sensors (Basel), 2013;13(2):2164-75.
    PMID: 23389346 DOI: 10.3390/s130202164
    In this work mass loading sensitivity of a Sezawa wave mode based surface acoustic wave (SAW) device is investigated through finite element method (FEM) simulation and the prospects of these devices to function as highly sensitive SAW sensors is reported. A ZnO/Si layered SAW resonator is considered for the simulation study. Initially the occurrence of Sezawa wave mode and displacement amplitude of the Rayleigh and Sezawa wave mode is studied for lower ZnO film thickness. Further, a thin film made of an arbitrary material is coated over the ZnO surface and the resonance frequency shift caused by mass loading of the film is estimated. It was observed that Sezawa wave mode shows significant sensitivity to change in mass loading and has higher sensitivity (eight times higher) than Rayleigh wave mode for the same device configuration. Further, the mass loading sensitivity was observed to be greater for a low ZnO film thickness to wavelength ratio. Accordingly, highly sensitive SAW sensors can be developed by coating a sensing medium over a layered SAW device and operating at Sezawa mode resonance frequency. The sensitivity can be increased by tuning the ZnO film thickness to wavelength ratio.
    Matched MeSH terms: Acoustics
  15. Fulltext Time frequency analysis of peking gamelan
    Sinin Hamdan, Iran Amri Musoddiq, Ahmad Fauzi Musib, Marini Sawawi
    Pertanika Journal of Science & Technology, 2020;28(2):441-457.
    MyJurnal
    The tone of peking 1, 2, 3, 5, 6, 1’ was investigated using time-frequency analysis (TFA). The frequencies were measured using PicoScope oscilloscope, Melda analyzer in Cubase version 9 and Adobe version 3. Three different approaches for time-frequency analysis were used: Fourier spectra (using PicoScope), spectromorphology (using Melda analyzer) and spectrograms (using Adobe). Fourier spectra only identify intensity-frequency within entire signals, while spectromorphology identify the changes of intensity-frequency spectrum at fixed time and Adobe spectrograms identify the frequency with time. PicoScope reading produces the spectra of the fundamental and overtone frequencies in the entire sound. These overtones are non-harmonic since they are non-integral multiples of the fundamental. The fundamental frequencies of peking 1, 2, 3, 5, 6 were 1066Hz (C6), 1178Hz (D6), 1342Hz (E6), 1599Hz (G6) and 1793Hz (A6) respectively while peking 1’was 2123Hz (C7) i.e. one octave higher than peking 1. Melda analyzer reading proved that all peking sustained the initial fundamental frequency and overtone at t=0 until 2s. TFA from Adobe reading provides a description of the sound in the time-frequency plane. From TFA, peking 1, 2 and 6 exhibited a much gentler attack and more rapid decay than peking 3, 5 and 1’.
    Matched MeSH terms: Speech Acoustics
  16. Fulltext Development of a Linear Acoustic Array for Aero-Acoustic Quantification of Camber-Bladed Vertical Axis Wind Turbine
    Butt AH, Akbar B, Aslam J, Akram N, Soudagar MEM, García Márquez FP, et al.
    Sensors (Basel), 2020 Oct 21;20(20).
    PMID: 33096774 DOI: 10.3390/s20205954
    Vertical axis wind turbines (VAWT) are a source of renewable energy and are used for both industrial and domestic purposes. The study of noise characteristics of a VAWT is an important performance parameter for the turbine. This study focuses on the development of a linear microphone array and measuring acoustic signals on a cambered five-bladed 45 W VAWT in an anechoic chamber at different tip speed ratios. The sound pressure level spectrum of VAWT shows that tonal noises such as blade passing frequencies dominate at lower frequencies whereas broadband noise corresponds to all audible ranges of frequencies. This study shows that the major portion of noise from the source is dominated by aerodynamic noises generated due to vortex generation and trailing edge serrations. The research also predicts that dynamic stall is evident in the lower Tip speed ratio (TSR) region making smaller TSR values unsuitable for a quiet VAWT. This paper compares the results of linear aeroacoustic array with a 128-MEMS acoustic camera with higher resolution. The study depicts a 3 dB margin between two systems at lower TSR values. The research approves the usage of the 8 mic linear array for small radius rotary machinery considering the results comparison with a NORSONIC camera and its resolution. These observations serve as a basis for noise reduction and blade optimization techniques.
    Matched MeSH terms: Acoustics
  17. Demarcating and highlighting in Papuan Malay phrase prosody
    Kaland C, Baumann S
    J Acoust Soc Am, 2020 04;147(4):2974.
    PMID: 32359299 DOI: 10.1121/10.0001008
    Phrase-level prosody serves two essential functions in many languages of the world: chunking information into units (demarcating) and marking important information (highlighting). Recent work suggests that prosody has a mainly demarcating function in the Trade Malay language family. That is, the use of pitch accents in these languages is limited or absent, as the main prosodic events occur on the final two syllables in a phrase. The current study investigates the extent to which Papuan Malay phrase prosody is used for demarcating and highlighting, taking into account the potential influence of word stress. This is done by means of acoustic analyses on a corpus of spontaneous speech. Both the form (F0 movement) and the possible functions (demarcating and highlighting) of the final two syllables in Papuan Malay phrases are investigated. Although most results favor the demarcating function of Papuan Malay phrase prosody, a highlighting function cannot be ruled out. The results suggest that Papuan Malay might hold an exceptional position in the typology of prosodic prominence.
    Matched MeSH terms: Speech Acoustics
  18. Fulltext A Fluidics-Based Double Flexural Membrane Piezoelectric Micromachined Ultrasonic Transducer (PMUT) for Wide-Bandwidth Underwater Acoustic Applications
    Ahmad KA, Rahman MFA, Zain KAM, Haron MN, Manaf AA
    Sensors (Basel), 2021 Aug 19;21(16).
    PMID: 34451023 DOI: 10.3390/s21165582
    In acoustic receiver design, the receiving sensitivity and bandwidth are two primary parameters that determine the performance of a device. The trade-off between sensitivity and bandwidth makes the design very challenging, meaning it needs to be fine-tuned to suit specific applications. The ability to design a PMUT with high receiving sensitivity and a wide bandwidth is crucial to allow a wide spectrum of transmitted frequencies to be efficiently received. This paper presents a novel structure involving a double flexural membrane with a fluidic backing layer based on an in-plane polarization mode to optimize both the receiving sensitivity and frequency bandwidth for medium-range underwater acoustic applications. In this structure, the membrane material and electrode configuration are optimized to produce good receiving sensitivity. Simultaneously, a fluidic backing layer is introduced into the double flexural membrane to increase the bandwidth. Several piezoelectric membrane materials and various electrode dimensions were simulated using finite element analysis (FEA) techniques to study the receiving performance of the proposed structure. The final structure was then fabricated based on the findings from the simulation work. The pulse-echo experimental method was used to characterize and verify the performance of the proposed device. The proposed structure was found to have an improved bandwidth of 56.6% with a receiving sensitivity of -1.8864 dB rel 1 V µPa. For the proposed device, the resonance frequency and center frequency were 600 and 662.5 kHz, respectively, indicating its suitability for the targeted frequency range.
    Matched MeSH terms: Acoustics
  19. Fulltext Investigating insulator UV signal frequency components as potential tools for condition monitoring of ceramic insulators
    Saiful Mohammad Iezham Suhaimi, Nouruddeen Bashir, Nor Asiah Muhamad, Mohd Aizam Talib
    Pertanika Journal of Science & Technology, 2017;25(102):291-298.
    MyJurnal
    Contaminated and ageing transmission line insulators often suffer from temporary or permanent loss of their insulating properties due to flashover resulting in power system failure. Surface discharges are precursors to flashover. To pre-empt any occurrence of flashovers, utility companies monitor the conditions of their insulators. There are numerous insulator surface monitoring techniques such as Leakage Current, Acoustics, and Infrared. However, these techniques may not be suitable for in-situ condition monitoring of the insulators as they are prone to noise, affected by environmental conditions or contact methods. Monitoring of the UV signals emitted by the surface discharges of these insulators has been reported to be a promising technique. However, comprehensive studies on this technique is lacking, especially on aged insulators. This paper investigated the UV signals of contaminated and aged insulators detected during surface discharge activities using UV pulse method. The time and frequency domain of the UV signals were analysed for a group of insulator samples having varying levels of contamination and phases of ageing. Results show that there is a strong correlation between the contamination level and ageing of the insulators with the amplitude and harmonic components of the UV signals. This correlation can useful to monitor in-service insulator surface conditions.
    Matched MeSH terms: Acoustics
  20. Fulltext QoSRP: A Cross-layer QoS Channel-Aware Routing Protocol for the Internet of Underwater Acoustic Sensor Networks
    Faheem M, Butt RA, Raza B, Alquhayz H, Ashraf MW, Shah SB, et al.
    Sensors (Basel), 2019 Nov 02;19(21).
    PMID: 31684014 DOI: 10.3390/s19214762
    Quality of service (QoS)-aware data gathering in static-channel based underwater wireless sensor networks (UWSNs) is severely limited due to location and time-dependent acoustic channel communication characteristics. This paper proposes a novel cross-layer QoS-aware multichannel routing protocol called QoSRP for the internet of UWSNs-based time-critical marine monitoring applications. The proposed QoSRP scheme considers the unique characteristics of the acoustic communication in highly dynamic network topology during gathering and relaying events data towards the sink. The proposed QoSRP scheme during the time-critical events data-gathering process employs three basic mechanisms, namely underwater channel detection (UWCD), underwater channel assignment (UWCA) and underwater packets forwarding (UWPF). The UWCD mechanism finds the vacant channels with a high probability of detection and low probability of missed detection and false alarms. The UWCA scheme assigns high data rates channels to acoustic sensor nodes (ASNs) with longer idle probability in a robust manner. Lastly, the UWPF mechanism during conveying information avoids congestion, data path loops and balances the data traffic load in UWSNs. The QoSRP scheme is validated through extensive simulations conducted by NS2 and AquaSim 2.0 in underwater environments (UWEs). The simulation results reveal that the QoSRP protocol performs better compared to existing routing schemes in UWSNs.
    Matched MeSH terms: Acoustics
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links