MyMedR

Displaying publications 1 - 20 of 106 in total

Abstract:

Sort:

Allergenic proteins of natural rubber latex

Yeang HY, Arif SA, Yusof F, Sunderasan E

Methods, 2002 May;27(1):32-45.
PMID: 12079415 DOI: 10.1016/S1046-2023(02)00049-X

As the living cytoplasm of laticiferous cells, Hevea brasiliensis latex is a rich blend of organic substances that include a mélange of proteins. A small number of these proteins have given rise to the problem of latex allergy. The salient characteristics of H. brasiliensis latex allergens that are recognized by the International Union of Immunological Societies (IUIS) are reviewed. These are the proteins associated with the rubber particles, the cytosolic C-serum proteins and the B-serum proteins that originate mainly from the lutoids. Procedures for the isolation and purification of latex allergens are discussed, from latex collection in the field to various preparative approaches adopted in the laboratory. As interest in recombinant latex allergens increases, there is a need to validate recombinant proteins to ascertain equivalence with their native counterparts when used in immunological studies, diagnostics, and immunotherapy.

Matched MeSH terms: Latex/immunology*; Latex Hypersensitivity/immunology*
Natural rubber latex allergens: new developments

Yeang HY

Curr Opin Allergy Clin Immunol, 2004 Apr;4(2):99-104.
PMID: 15021061

PURPOSE OF REVIEW:
New allergenic latex proteins have been identified, whereas further information on known latex allergens has emerged in recent years. Although prevalence figures for sensitization to the various latex allergens have been published in several studies in the past, the data have not been collated to facilitate cross-comparison.

RECENT FINDINGS:
Salient characteristics of the three most recently identified latex allergens, Hev b 11, 12 and 13 are described, whereas new findings on some of the previously recognized allergens are examined. Hev b 2 is viewed from the standpoint of allergenicity and protein glycosylation, Hev b 4 in relation to its biochemical identity and molecular cloning, Hev b 5 with respect to its recombinant form, and Hev b 6 in connection with conformational IgE epitopes. Reports on sensitization or allergic reaction to purified latex allergens from recent and past work are summarized. The use of latex allergens in latex allergy diagnostics is reviewed and discussed.

SUMMARY:
Thirteen latex allergens have been recognized by the International Union of Immunological Societies. Based on the results of published studies, native Hev b 2, recombinant Hev b 5, native or recombinant Hev b 6, native Hev b 13, and possibly native Hev b 4 are the major allergens relevant to latex-sensitized adults. Although there is an increasing tendency to identify and characterize latex allergens largely on the basis of their recombinant forms, not all such recombinant proteins have been fully validated against their native counterparts with respect to clinical significance.

Matched MeSH terms: Latex/adverse effects*; Latex/classification; Latex Hypersensitivity/diagnosis; Latex Hypersensitivity/etiology*
Appraisal of latex glove proteins in the induction of sensitivity to multiple latex allergens

Yeang HY, Chow KS, Yusof F, Arif SA, Chew NP, Loke YH

J Investig Allergol Clin Immunol, 2000 Jul-Aug;10(4):215-22.
PMID: 11039838

Six Hevea brasiliensis latex protein allergens, Hevb 1, Hev b 2, Hev b 3, Hev b 4, and two variants of Hev b 7 (7b and 7c), were purified from Hevea latex, while a seventh protein, Hev b 5, was prepared in recombinant form. The presence of these proteins in glove extracts was indicated by their respective antibodies in the serum of rabbits immunized against the extracts. The relative propensities of IgE binding to the individual latex allergens were compared using sera from latex-allergic patients. IgE recognition of Hev b 4, Hev b 7b, Hev b 5 and Hev b 2 was most frequently encountered, with 75, 61, 31 and 28%, respectively, of the patient sera reacting. Sensitivity to multiple latex proteins was common, and out of the 31 seropositive patients, 23 (74%/ ) had IgE against at least two latex allergens, while 12 (39%) had IgE specific for at least three allergens. Statistical analysis of the data suggested that many patients might have acquired sensitivity to Hev b 2, Hev b 4 and Hev b 7b from a common source. (e.g., from latex products). On the other hand, sensitivity to Hev b 5 and to Hev b 7c were interrelated. It is plausible that sensitivity to these two proteins might have been acquired from sources other than latex products (e.g., from certain foods).

Matched MeSH terms: Latex/adverse effects*; Latex/immunology; Latex/chemistry; Latex Hypersensitivity/diagnosis*; Latex Hypersensitivity/etiology*
Hev b 5 and Hev b 13 as allergen markers to estimate the allergenic potency of latex gloves

Yeang HY, Arif SA, Raulf-Heimsoth M, Loke YH, Sander I, Sulong SH, et al.

J Allergy Clin Immunol, 2004 Sep;114(3):593-8.
PMID: 15356563 DOI: 10.1016/j.jaci.2004.05.039

BACKGROUND:
Sensitization to natural rubber latex has been linked to proteins from medical latex gloves. Various assays to estimate the amount of residual allergenic proteins extractable from latex gloves to assess their potential exposure hazard have inherent weaknesses.

OBJECTIVE:
This investigation was aimed at developing 2-site immunoenzymetric assays and identifying appropriate protein markers to assess the allergenic potential of latex gloves.

METHODS:
The presence of 6 latex allergens--Hev b 1, 2, 3, 5, 6, and 13--was measured in a cross-section of commercial latex medical gloves by using monoclonal and polyclonal antibody-based 2-site immunoenzymetric assays. The overall allergenic potential of these gloves was assessed by IgE-inhibition assay. Stepwise multiple regression analyses were performed to identify marker allergens that best explained the variation in latex glove allergenicity.

RESULTS:
All 6 latex allergens were detected in at least some of the glove samples. Hev b 5 and Hev b 13 were identified as the marker allergens that combined best to explain the variation in the glove allergenicity. The significant multiple correlation (R=0.855) between these 2 markers and glove allergenic potency forms the basis of an assay to gauge latex glove allergenicity.

CONCLUSION:
The overall allergenic potential of latex gloves can be estimated by using Hev b 5 and Hev b 13 as indicator allergens. The correlation between glove allergenicity and the level of these allergens was maintained for low-protein gloves (<200 microg/g). This estimation of glove allergenicity was superior to that obtained by using total protein readings.

Matched MeSH terms: Latex/adverse effects; Latex/chemistry; Latex Hypersensitivity/prevention & control
Prevalence of latex allergy may be vastly overestimated when determined by in vitro assays

Yeang HY

Ann. Allergy Asthma Immunol., 2000 Jun;84(6):628-32.
PMID: 10875493 DOI: 10.1016/S1081-1206(10)62415-5

BACKGROUND:
The prevalence of latex-specific IgE computed from the results of serologic assays is commonly thought to reflect, to a greater or lesser extent, the prevalence of latex allergy and its implied risk.

OBJECTIVE:
The study examines how imperfect test specificity of in vitro assays influences the precision of latex allergy prevalence that it estimates.

METHODS:
Various models encompassing a range of hypothetical test sensitivity and specificity values are investigated to gauge their influence on the estimate of latex allergy prevalence. The models examine these interactions in situations of high or low allergy prevalence.

RESULTS:
Serologic latex diagnostic assays with test specificity within the range of those of commercially available assays can greatly overestimate prevalence where the true prevalence is low (eg, of the order of one in 100 or one in 1,000). A formula to correct for errors in prevalence estimates arising from imperfect test sensitivity and specificity of an in vitro assay is presented.

CONCLUSION:
While serologic assays for latex IgE pose few hazards to the patient and are useful for confirming the diagnosis of latex allergy, the test results may vastly overestimate the true prevalence of latex allergy and its associated risks in situations where latex allergy is actually rare.

Matched MeSH terms: Latex Hypersensitivity/diagnosis; Latex Hypersensitivity/epidemiology*
The manufacture of gloves from natural rubber latex

Yip E, Cacioli P

J Allergy Clin Immunol, 2002 Aug;110(2 Suppl):S3-14.
PMID: 12170237 DOI: 10.1067/mai.2002.124499

Gloves that will provide a barrier of protection from infectious organisms are an essential feature of medical practice for the protection of both patients and medical personnel. Natural rubber latex has consistently been the most satisfactory raw material for the manufacture of gloves. Certain latex proteins, carried over into the finished product by inadequate manufacturing processes, may pose a risk of provoking allergic reactions in some patients and medical workers. As with any allergy, the risk depends on the route of exposure and dose. Hence, the method of manufacture, including the means used to coat gloves to make donning easy, can influence the eventual exposure of sensitive people to latex allergens. In this article, we describe the several processes in use and their effects on latex protein content.

Matched MeSH terms: Latex/immunology; Latex/isolation & purification
Health-care professionals exposed to latex allergy: a cause of concern?

Das S

ANZ J Surg, 2008 Nov;78(11):939.
PMID: 18959687 DOI: 10.1111/j.1445-2197.2008.04708.x
Matched MeSH terms: Latex/adverse effects*; Latex Hypersensitivity/epidemiology*
Complete genome sequence of Streptomyces sp. strain CFMR 7, a natural rubber degrading actinomycete isolated from Penang, Malaysia

Nanthini J, Chia KH, Thottathil GP, Taylor TD, Kondo S, Najimudin N, et al.

J Biotechnol, 2015 Nov 20;214:47-8.
PMID: 26376470 DOI: 10.1016/j.jbiotec.2015.09.007

Streptomyces sp. strain CFMR 7, which naturally degrades rubber, was isolated from a rubber plantation. Whole genome sequencing and assembly resulted in 2 contigs with total genome size of 8.248 Mb. Two latex clearing protein (lcp) genes which are responsible for rubber degrading activities were identified.

Matched MeSH terms: Latex
Fulltext Microcellular rubber: a study on reclaimed natural rubber (NR) latex gloves/Standard Malaysian Rubber (SMR) 20 blends

Wan, Ngeow Yen, Chin, Khaw Pei, Che Su Mt. Saad

Pertanika Journal of Science & Technology, 2011;19(1):171-176.
MyJurnal

Reclaimed rubber from rejected natural rubber (NR) latex gloves (r-NRG) was evaluated as partial
replacement for Standard Malaysian Rubber (SMR) 20 in producing microcellular rubber. In the study, the amount of reclaimed rubber varied from 20 pphr to 95 pphr for the purpose of cost reduction, environmental interest and as processing aids in reducing internal porosity, swells and to minimize shrinkage and air-trapped problems in producing microcellular rubber. A typical formulation in making microcellular rubber slab was developed and two-roll mill was used for compounding. The cure characteristics and mechanical properties, such as density, hardness, tensile strength, and elongation at break, were evaluated. Scorch time and cure rate index performed marginal decreased with increasing of r-NRG content. 95 pphr r-NRG blends showed a consequential drop in hardness. Both tensile properties and elongation at break decreased as the r-NRG content was increased.

Matched MeSH terms: Latex
Hevea brasiliensis latex proteomics: a review of analytical methods and the way forward

Habib MAH, Ismail MN

J Plant Res, 2021 Jan;134(1):43-53.
PMID: 33108557 DOI: 10.1007/s10265-020-01231-x

Natural rubber or latex from the Hevea brasiliensis is an important commodity in various economic sectors in today's modern society. Proteins have been detected in latex since the early twentieth century, and they are known to regulate various biological pathways within the H. brasiliensis trees such as the natural rubber biosynthesis, defence against pathogens, wound healing, and stress tolerance. However, the exact mechanisms of the pathways are still not clear. Proteomic analyses on latex have found various proteins and revealed how they fit into the mechanisms of the biological pathways. In the past three decades, there has been rapid latex protein identification due to the improvement of latex protein extraction methods, as well as the emergence of two-dimensional gel electrophoresis (2-DE) and mass spectrometry (MS). In this manuscript, we reviewed the methods of latex protein extraction that keeps on improving over the past three decades as well as the results of numerous latex protein identification and quantitation.

Matched MeSH terms: Latex
Bio-coatings as immobilized microalgae cultivation enhancement: A review

Tong CY, Derek CJC

Sci Total Environ, 2023 Aug 20;887:163857.
PMID: 37149157 DOI: 10.1016/j.scitotenv.2023.163857

Bio-coatings serve as artificial scaffolds for immobilizing microalgae to facilitate cell concentration and harvesting. It has been used as an additional step to enhance the natural microalgal biofilm cultivation and to promote new opportunities in artificially-immobilize cultivation technology of microalgae. This technique is able to enhance biomass productivities, enable energy and cost saving, water volume reduction and ease of biomass harvesting since the cells are physically isolated from the liquid medium. However, scientific discoveries of bio-coatings for process intensification are still lacking and their working principles remained unclear. Therefore, this critical review aims to shed light on the advancement of cell encapsulation systems (hydrogel coating, artificial leaf, bio-catalytic latex coating, and cellular polymeric coating) over the years and aid in the selection of appropriate bio-coating techniques for various applications. Discussion on the different preparation routes of bio-coatings, as well as the exploration towards the potential of bio-based coating materials such as natural/synthetic polymers, latex binders, and algal organic matters are also included, with a focus on sustainable pursuits. This review also presents in-depth investigations into the environmental applications of bio-coatings in wastewater remediation, air purification, carbon bio-fixation, and bio-electricity. The field of bio-coating in microalgae immobilization gives rise to a new ecofriendly strategy with scalable cultivation footprint and a balanced environmental risk aligning with the United Nation's Sustainable Development Goals with potential towards the contribution of Zero Hunger, Clean Water and Sanitation, Affordable and Clean Energy, and Responsible Consumption and Production.

Matched MeSH terms: Latex
Eco-friendly bio-based adhesive for plywood from natural rubber latex (NRL)-blended isocyanate cross-linked starch

Soubam T, Gupta A, Jamari SS

Environ Sci Pollut Res Int, 2023 Dec;30(60):124610-124618.
PMID: 35610450 DOI: 10.1007/s11356-022-20788-9

Synthetic adhesives used in the production of plywood are a matter of concern because of the emission of carcinogenic gas formaldehyde, increased environmental pollution, and the depletion of fossil fuels. In this study, a bioadhesive composed of natural rubber latex (NRL) and rice starch was developed. However, rice starch has low moisture resistance, resulting in low adhesion. Thus, to enhance the effectiveness of NRL-blended rice starch-based bioadhesive, rice starch was cross-linked with polymeric 4,4″-diphenylmethane diisocyanate (pMDI) resin, which is an environment-friendly, formaldehyde free, and moisture resistant that is highly compatible with starch. The chemical interaction, viscosity, solid content, and gel time of the developed NRL-isocyanate cross-linked rice starch-based bioadhesive was investigated. The efficacy of the formulated bioadhesive was demonstrated by the fabrication of plywood. The presence of isocyanate and urethane capabilities in the bioadhesive formulations was confirmed by Fourier transform infrared spectroscopy (FTIR). The bioadhesive type Iso-A was discovered to have the highest viscosity of 8270 mPa.s, whereas Iso-B has the shortest gel time of 3.46 min and the highest solid content of 44%; the higher solid content accelerates the gel time. In terms of physical and mechanical properties of plywood, Iso-B has the lowest thickness swelling (TS) value of 13%, lowest water absorption (WA) value of 52% and shear strength value of 1.92 MPa, which corresponds to the ISO 12466-2-2007 standard requirements. Based on the results, NRL-blended isocyanate starch-based bioadhesive could be a good potential raw material for eco-friendly plywood industries with adequate accuracy.

Matched MeSH terms: Latex
Detection of immunoglobulin antibodies in the sera of patients using purified latex allergens

Kurup VP, Yeang HY, Sussman GL, Bansal NK, Beezhold DH, Kelly KJ, et al.

Clin Exp Allergy, 2000 Mar;30(3):359-69.
PMID: 10691894

BACKGROUND: Latex allergy is largely an occupational allergy due to sensitization to natural rubber latex allergens present in a number of health care and household products. Although several purified allergens are currently available for study, information on the usefulness of these purified, native or recombinant allergens in the demonstration of specific immunoglobulin (Ig) E in the sera of patients is lacking.
OBJECTIVE: To evaluate the purified latex allergens and to demonstrate specific IgE antibody in the sera of health care workers and spina bifida patients with clinical latex allergy.
METHODS: Two radioallergosorbent and an enzyme-linked immunosorbent assay (ELISA) using latex proteins Hev b 1, 2, 3, 4, 6 and 7 along with two glove extracts and Malaysian nonammoniated latex (MNA) were evaluated to demonstrate IgE in the sera of health care workers and spina bifida with latex allergy and controls with no history of latex allergy.
RESULTS: ELISA using the purified latex allergens demonstrated specific IgE in 32-65% health care workers and 54-100% of spina bifida patients with latex allergy. The corresponding figures for RAST were 13-48 and 23-85 for RAST-1 and 19-61 and 36-57 for RAST-2. These results were comparable with the results obtained with glove extracts and crude rubber latex proteins.
CONCLUSIONS: When used simultaneously, latex proteins Hev b 2 and Hev b 7 reacted significantly with specific serum IgE in 80% of health care workers and 92% of spina bifida patients with latex allergy by ELISA technique, while this combination gave lower positivity when the RASTs were used. By the addition of Hev b 3, specific IgE was detected in all spina bifida patients with latex allergy. Both RASTs failed to show specific IgE in the control subjects, while the ELISA showed significant latex-specific IgE in 22% of controls.

Matched MeSH terms: Latex/adverse effects; Latex/immunology*; Latex/isolation & purification; Latex Hypersensitivity/etiology; Latex Hypersensitivity/immunology*
Preparation and characterization of potato starch nanocrystal reinforced natural rubber nanocomposites

Rajisha KR, Maria HJ, Pothan LA, Ahmad Z, Thomas S

Int J Biol Macromol, 2014 Jun;67:147-53.
PMID: 24657376 DOI: 10.1016/j.ijbiomac.2014.03.013

Potato starch nanocrystals were found to serve as an effective reinforcing agent for natural rubber (NR). Starch nanocrystals were obtained by the sulfuric acid hydrolysis of potato starch granules. After mixing the latex and the starch nanocrystals, the resulting aqueous suspension was cast into film by solvent evaporation method. The composite samples were successfully prepared by varying filler loadings, using a colloidal suspension of starch nanocrystals and NR latex. The morphology of the nanocomposite prepared was analyzed by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). FESEM analysis revealed the size and shape of the crystal and their homogeneous dispersion in the composites. The crystallinity of the nanocomposites was studied using XRD analysis which indicated an overall increase in crystallinity with filler content. The mechanical properties of the nanocomposites such as stress-strain behavior, tensile strength, tensile modulus and elongation at break were measured according to ASTM standards. The tensile strength and modulus of the composites were found to improve tremendously with increasing nanocrystal content. This dramatic increase observed can be attributed to the formation of starch nanocrystal network. This network immobilizes the polymer chains leading to an increase in the modulus and other mechanical properties.

Matched MeSH terms: Latex/chemistry
Development of a slide latex agglutination test for rotavirus antigen detection

Yap KL

Malays J Pathol, 1994 Jun;16(1):49-56.
PMID: 16329576

The aim of this study was to optimize the conditions for the passive adsorption of polyclonal antibody onto plain surface polystyrene latex particles and its performance in a slide latex agglutination test for rotavirus antigen detection. Cleaning of latex particles by washing through repetitive centrifuging, decanting and resuspending in distilled water was adequate in removing surfactants from the particles' surfaces to enable coating. A study of antibody concentration, incubation temperature and buffer pH revealed that optimum coating was achieved with a 3-fold excess of antibody to the calculated total particle surface capacity for the antibody in a glycine-saline buffer of pH 9.2 at 40 degrees C for 4 hours. The ionic strength and pH of the latex suspending buffer and the sample buffer were critical factors determining the sensitivity of the test and the appearance of non-specific agglutination. Ultrasonication, addition of glycerol and Tween 20, either individually or in combination, were able to suppress non-specific agglutination in some batches of latex reagents. Polyethylene glycol 6000 enhanced the quality of agglutination as well as reduced the time of its appearance, especially in reagents that produced poor agglutination.

Matched MeSH terms: Latex Fixation Tests/methods*
Fulltext In vitro antioxidant activity of Ficus carica L. latex from 18 different cultivars

Shahinuzzaman M, Yaakob Z, Anuar FH, Akhtar P, Kadir NHA, Hasan AKM, et al.

Sci Rep, 2020 07 02;10(1):10852.
PMID: 32616768 DOI: 10.1038/s41598-020-67765-1

As synthetic antioxidants that are widely used in foods are known to cause detrimental health effects, studies on natural additives as potential antioxidants are becoming increasingly important. In this work, the total phenolic content (TPC) and antioxidant activity of Ficus carica Linn latex from 18 cultivars were investigated. The TPC of latex was calculated using the Folin-Ciocalteu assay. 1,1-Diphenyl-2-picrylhydrazyl (DPPH), 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and ferric ion reducing antioxidant power (FRAP) were used for antioxidant activity assessment. The bioactive compounds from F. carica latex were extracted via maceration and ultrasound-assisted extraction (UAE) with 75% ethanol as solvent. Under the same extraction conditions, the latex of cultivar 'White Genoa' showed the highest antioxidant activity of 65.91% ± 1.73% and 61.07% ± 1.65% in DPPH, 98.96% ± 1.06% and 83.04% ± 2.16% in ABTS, and 27.08 ± 0.34 and 24.94 ± 0.84 mg TE/g latex in FRAP assay via maceration and UAE, respectively. The TPC of 'White Genoa' was 315.26 ± 6.14 and 298.52 ± 9.20 µg GAE/mL via the two extraction methods, respectively. The overall results of this work showed that F. carica latex is a potential natural source of antioxidants. This finding is useful for further advancements in the fields of food supplements, food additives and drug synthesis in the future.

Matched MeSH terms: Latex/chemistry*
Fulltext Rotavirus - A Retrospective Study of Incidence at the Hospital Universiti Sains Malaysia (HUSM)

Ludin CM, Radzi JM, Maimunah A

Malays J Med Sci, 2003 Jul;10(2):87-90.
PMID: 23386803 MyJurnal

The present study, analyzes data from 1991 to 2000 for rotavirus infection among children with diarrhoea and acute gastroenteritis admitted to the Hospital Universiti Sains Malaysia (HUSM). The Latex Slide Agglutination Test was used for the detection of rotavirus antigens. Out of 1097 stool samples tested, 207 samples or 18.8 % were found to be positive for rotavirus. The infection occurred most frequently in infants and young children from 6 months to 2 years of age. The infection was recorded highest in the year of 2000 - 48 cases (34.1%) and the lowest in 1999 - 5 cases (6.6%). Stool examination and cultures from the rotavirus positive samples revealed no parasites and enteropathogenic bacteria. These observations suggested that rotavirus could still remain as an important agent causing diarrhoea and gastroenteritis in young children admitted to HUSM.

Matched MeSH terms: Latex; Latex Fixation Tests
Anti-fungal effect of Hevea brasiliensis latex C-serum on Aspergillus niger

Daruliza KM, Lam KL, Yang KL, Priscilla JT, Sunderasan E, Ong MT

Eur Rev Med Pharmacol Sci, 2011 Sep;15(9):1027-33.
PMID: 22013725

Hevea brasiliensis extract could potentially be employed as a relatively low cost resource for various anti-fungal activities due to the simplicity of latex preparation and the abundance of latex that can be obtained in rubber producing regions. The present study was aimed at examining the species specific anti-fungal property of H. brasilensis latex C-serum against Aspergillus niger.

Matched MeSH terms: Latex/isolation & purification; Latex/pharmacology*; Latex/toxicity
The 14.6 kd rubber elongation factor (Hev b 1) and 24 kd (Hev b 3) rubber particle proteins are recognized by IgE from patients with spina bifida and latex allergy

Yeang HY, Cheong KF, Sunderasan E, Hamzah S, Chew NP, Hamid S, et al.

J Allergy Clin Immunol, 1996 Sep;98(3):628-39.
PMID: 8828541 DOI: 10.1016/s0091-6749(96)70097-0

Two major water-insoluble proteins are located on the surface of rubber particles in Hevea brasiliensis latex. A 14.6 kd protein (Hev b 1), found mainly on large rubber particles (> 350 mm in diameter), and a 24 kd protein (Hev b 3), found mainly on small rubber particles (average diameter, 70 nm), are recognized by IgE from patients with spina bifida and latex allergy. Although Hev b 1 (also called the rubber elongation factor [REF]) has previously been reported as a major latex allergen, this conclusion has been disputed on the basis of results from other studies. The allergenicity of Hev b 1 is verified in this study by testing the recombinant protein generated from its gene. Because allergenicity is confined to patients with spina bifida and not observed in adults sensitive to latex, it is not a major latex allergen. The identification of Hev b 3 as another allergen originating from rubber particles is confirmed by immunogold labeling and electron microscopy. Observations with the monoclonal antibody USM/RC2 developed against Hev b 3 show that the protein has a tendency to fragment into several polypeptides of lower molecular weight (from 24 kd to about 5 kd) when stored at -20 degrees C. There is also indication of protein aggregation from the appearance of proteins with molecular weights greater than 24 kd. Fragmentation of Hev b 3 is induced immediately on he addition of latex B-serum, which is normally compartmentalized in the lutoids in fresh latex. In the preparation of ammoniated latex (used for the manufacture of latex products), the lutoids are ruptured, and the released B-serum reacts with Hev b 3 on the rubber particles to give rise to an array of low molecular weight polypeptides that are allergenic to patients with spina bifida.

Matched MeSH terms: Latex/immunology*; Latex/metabolism; Latex/chemistry
Fulltext Properties Of Sulphur In Colloidal System: A Review

Nuriah Mohamad, Azlin Suhaida Azmi, Fathilah Ali, Mohamad Firdaus Omar

Biological and Natural Resources Engineering Journal, 2019;2(2):13-20.
MyJurnal

Sulfur has been highly sought by many industries everywhere around the world for various applications. This exceptionally useful element has been largely manufactured especially in powder form each year reflecting its increase in demand in line with technological advancement and uses for various product applications. The manufacturing processes include mining as well as chemical reactions in Claus Process. Rubber industries normally use abundance of sulfur in their latex compound to introduce vulcanization. The geneal concern of sulfur for rubber vulcanization is dispersibility in the rubber matrix due to improper optimization of its preparation process prior to latex compounding. Another crucial issue is crystallization of soluble sulfur from its insoluble origin, either during or post-rubber vulcanization that constitutes to formation of sulfur bloom that grows on the surface of the rubber articles. It is known that both issues are related to the process conditions and compounding recipe that could not be fully solved. Various studies have been conducted to minimize such occurences – from process optimization to sulfur chemistry itself – and of continuous improvement and innovation to solve various threats in sulfur applications. This paper reviews on detailed description on elemental sulfur, of respective industrial applications, and most importantly highlights on sulfur trends and issues normally encountered.

Matched MeSH terms: Latex

Filters

Please provide feedback to Administrator ([email protected])

External Links