MyMedR

Displaying publications 1 - 20 of 144 in total

Abstract:

Sort:

An update on formaldehyde adulteration in food: sources, detection, mechanisms, and risk assessment

Rahman MB, Hussain M, Kabiraz MP, Nordin N, Siddiqui SA, Bhowmik S, et al.

Food Chem, 2023 Nov 30;427:136761.
PMID: 37406446 DOI: 10.1016/j.foodchem.2023.136761

Formaldehyde is added illegally to food to extend its shelf life due to its antiseptic and preservation properties. Several research has been conducted to examine the consequences of adulteration with formaldehyde in food items. These findings suggest that adding formaldehyde to food is considered harmful as it accumulates in the body with long-term consumption. In this review includes study findings on food adulteration with formaldehyde and their assessment of food safety based on the analytical method applied to various geographical regions, food matrix types, and their sources in food items. Additionally, this review sought to assess the risk of formaldehyde-tainted food and the understanding of its development in food and its impacts on food safety in light of the widespread formaldehyde adulteration. Finally, the study would be useful as a manual for implementing adequate and successful risk assessment to increase food safety.

Matched MeSH terms: Formaldehyde/analysis
Electrospun microcrystalline cellulose/chitosan porous composite nanofibrous membranes modified by non-thermal plasma for gaseous formaldehyde adsorption

Xiong J, Luo R, Jia Z, Ge S, Lam SS, Xie L, et al.

Int J Biol Macromol, 2024 Jan;256(Pt 2):128399.
PMID: 38007014 DOI: 10.1016/j.ijbiomac.2023.128399

To develop a green and facile adsorbent for removing indoor polluted formaldehyde (HCHO) gas, the biomass porous nanofibrous membranes (BPNMs) derived from microcrystalline cellulose/chitosan were fabricated by electrospinning. The enhanced chemical adsorption sites with diverse oxygen (O) and nitrogen (N)-containing functional groups were introduced on the surface of BPNMs by non-thermal plasma modification under carbon dioxide (CO2) and nitrogen (N2) atmospheres. The average nanofiber diameters of nanofibrous membranes and their nanomechanical elastic modulus and hardness values decreased from 341 nm to 175-317 nm and from 2.00 GPa and 0.25 GPa to 1.70 GPa and 0.21 GPa, respectively, after plasma activation. The plasma-activated nanofibers showed superior hydrophilicity (WCA = 0°) and higher crystallinity than that of the control. The optimal HCHO adsorption capacity (134.16 mg g-1) of BPNMs was achieved under a N2 atmosphere at a plasma power of 30 W and for 3 min, which was 62.42 % higher compared with the control. Pyrrolic N, pyridinic N, CO and O-C=O were the most significant O and N-containing functional groups for the improved chemical adsorption of the BPNMs. The adsorption mechanism involved a synergistic combination of physical and chemical adsorption. This study provides a novel strategy that combines clean plasma activation with electrospinning to efficiently remove gaseous HCHO.

Matched MeSH terms: Formaldehyde/chemistry
Response of Coptotermes curvignathus (Isoptera: Rhinotermitidae) to formaldehyde catcher-treated particleboard

Lee SH, H'ng PS, Peng TL, Lum WC

Pak J Biol Sci, 2013 Nov 01;16(21):1415-8.
PMID: 24511759

The objective of this study is to investigate the feasibility of formaldehyde catcher as termites repellent. Single-layered UF-bonded particleboard was post-treated with formaldehyde catcher and heat respectively. Besides that, some boards were also produced with the formaldehyde catcher was added into the resin during the blending process, called add-in method. Particleboard post-treated with formaldehyde catcher reported the most severe attack. Heat-treated particleboard showed slightly better durability than the control blocks while the add-in catcher showed the best durability among three methods. A valid test was obtained as the termites survived the first week of the test. However, all the termites were found dead at the end of the test.

Matched MeSH terms: Formaldehyde*
Fulltext Evaluation of DNA and RNA extraction methods

Edwin Shiaw CS, Shiran MS, Cheah YK, Tan GC, Sabariah AR

Med J Malaysia, 2010 Jun;65(2):133-7.
PMID: 23756798 MyJurnal

This study was done to evaluate various DNA and RNA extractions from archival FFPE tissues. A total of 30 FFPE blocks from the years of 2004 to 2006 were assessed with each modified and adapted method. Extraction protocols evaluated include the modified enzymatic extraction method (Method A), Chelex-100 extraction method (Method B), heat-induced retrieval in alkaline solution extraction method (Methods C and D) and one commercial FFPE DNA Extraction kit (Qiagen, Crawley, UK). For RNA extraction, 2 extraction protocols were evaluated including the enzymatic extraction method (Method 1), and Chelex-100 RNA extraction method (Method 2). Results show that the modified enzymatic extraction method (Method A) is an efficient DNA extraction protocol, while for RNA extraction, the enzymatic method (Method 1) and the Chelex-100 RNA extraction method (Method 2) are equally efficient RNA extraction protocols.

Matched MeSH terms: Formaldehyde
Development of formaldehyde-free bio-board produced from mushroom mycelium and substrate waste

Khoo SC, Peng WX, Yang Y, Ge SB, Soon CF, Ma NL, et al.

J Hazard Mater, 2020 12 05;400:123296.
PMID: 32947701 DOI: 10.1016/j.jhazmat.2020.123296

Synthetic adhesives in the plywood industry are usually volatile compounds such as formaldehyde-based chemical which are costly and hazardous to health and the environment. This phenomenon promotes an interest in developing bio-boards without synthetic adhesives. This study proposed a novel application of natural mycelium produced during mushroom cultivation as natural bio-adhesive material that convert spent mushroom substrate (SMS) into high-performance bio-board material. Different types of spent mushroom substrates were compressed with specific designed mould with optimal temperature at 160 °C and 10 mPa for 20 min. The bio-board made from Ganoderma lucidum SMS had the highest internal bonding strength up to 2.51 mPa. This is far above the 0.4-0.8 range of China and US national standards. In addition, the material had high water and fire resistance, high bonding and densified structures despite free of any adhesive chemicals. These properties and the low cost one step procedure show the potential as a zero-waste economy chain for sustainable agricultural practice for waste and remediation.

Matched MeSH terms: Formaldehyde
Fulltext Infeksi entamoeba histolytica di kalangan kanak-kanak orang asli di Pos Lenjang, Pahang

Hartini Yusof, Mohamed Kamel Abd Ghani

Jurnal Sains Kesihatan Malaysia, 2009;7(1):59-64.
MyJurnal

Infeksi Entamoeba histolytica adalah tersebar di seluruh dunia dengan prevalens infeksi yang lebih tinggi di kalangan masyarakat terpinggir termasuk Orang Asli yang tinggal di kawasan tropika dan subtropika. Seramai 71 orang kanak-kanak Orang Asli dari Pos Lenjang, Pahang telah terlibat di dalam kajian ini. Bagi kajian yang lebih terperinci, kumpulan kanak-kanak ini telah dibahagikan menurut jantina dan umur. Sampel feses dikumpul dan setiap sampel diperiksa bagi pengenalpastian Entamoeba histolytica dengan menggunakan 3 jenis teknik diagnostik yang berbeza iaitu teknik apusan langsung, konsentrasi formalin-eter dan perwarnaan trikrom. Prevalens infeksi protozoa usus Entamoeba histolytica di kalangan kanak-kanak Orang Asli di Pos Lenjang, Pahang adalah tinggi iaitu 22.5%. Dari segi jantina, prevalens infeksi lebih tinggi di kalangan kanak-kanak perempuan (32.5%) berbanding kanak-kanak lelaki (9.7%). Infeksi juga didapati lebih kerap berlaku di kalangan kanak-kanak yang bersekolah (32.4%) berbanding kanak-kanak prasekolah (11.8%). Prevalens infeksi Entamoeba histolytica yang tinggi di kalangan kanak-kanak Orang Asli di Pos Lenjang, Pahang adalah berhubung kait dengan pelbagai faktor termasuk status sosioekonomi yang rendah, budaya, kekurangan kemudahan asas dan tahap pengetahuan mengenai penjagaan kesihatan serta kebersihan diri yang rendah.

Matched MeSH terms: Formaldehyde
Fulltext Giardiasis di kalangan kanak-kanak orang asli di Pos Lenjang, Pahang

Hartini Yusof, Mohamed Kamel Abd. Ghani

Jurnal Sains Kesihatan Malaysia, 2009;7(2):97-102.
MyJurnal

Giardia intestinalis merupakan parasit kosmopolitan dan infeksinya tersebar luas di seluruh dunia terutamanya di negara membangun yang tahap sanitasinya rendah dan kekurangan bekalan air yang bersih. Seramai 71 orang kanak-kanak Orang Asli dari Pos Lenjang, Pahang telah terlibat di dalam kajian ini. Sampel feses dikumpul dan diperiksa bagi mengesan infeksi G. intestinalis dengan menggunakan tiga teknik diagnosis iaitu teknik apusan langsung, konsentrasi formalin-eter dan perwarnaan trikrom. Prevalens infeksi Giardia intestinalis di kalangan kanak-kanak Orang Asli di Pos Lenjang, Pahang adalah tinggi iaitu 43.7%. Dari segi jantina, prevalens infeksi hampir sama di kalangan kanak-kanak perempuan (45.0%) berbanding kanak-kanak lelaki (41.9%). Infeksi juga didapati lebih banyak berlaku di kalangan kanak-kanak bersekolah (48.6%) berbanding kanakkanak pra-sekolah (38.2%).

Matched MeSH terms: Formaldehyde
Infeksi Entamoeba histolytica dan/atau Entamoeba dispar dalam kalangan kanak-kanak Orang Asli di Pos Sungai Rual, Jeli, Kelantan

Mariam Ahmad Zawawi, Mohamed Kamel Abd Ghani, Gopal G, Hidayatulfathi Othman, Hartini Yusof, Norhisham Haron

Sains Malaysiana, 2012;41:1095-1098.

entamoeba histolytica dan/atau entamoeba dispar merupakan protozoa usus yang mempunyai prevalens infeksi yang tinggi dalam kalangan masyarakat pedalaman terutamanya masyarakat Orang Asli. Ia tersebar secara meluas di kawasan tropika dan subtropika serta di negara membangun berbanding negara maju. Sebanyak 111 sampel feses kanak-kanak Orang Asli daripada suku kaum Jahai telah diterima dan disaring untuk entamoeba histolytica dan/atau entamoeba dispar menggunakan kaedah apusan langsung yang memberi hasil positif terhadap 43 sampel atau 38.7%. Oleh sebab amaun sampel yang diterima adalah sedikit, hanya 66 sampel feses sahaja yang dapat diperiksa menggunakan tiga jenis teknik diagnostik berbeza iaitu apusan langsung, kepekatan formalin-eter dan pewarnaan trikrom. Hasil kajian mendapati, prevalens yang tinggi bagi infeksi entamoeba histolytica dan/atau entamoeba dispar iaitu 50% menggunakan
ketiga-tiga teknik diagnosis. Prevalens infeksi yang tinggi juga turut ditunjukkan pada kanak-kanak perempuan iaitu 62.5% berbanding kanak-kanak lelaki 30.8% (p<0.05). Selain itu, daripada segi umur, kanak-kanak yang berumur 7-9 tahun adalah lebih terdedah kepada infeksi entamoeba histolytica dan/atau entamoeba dispar dengan prevalens 60.7% (p>0.05). Teknik pewarnaan trikrom menunjukkan pengesanan 100% ke atas infeksi entamoeba histolytica dan/atau entamoeba dispar, diikuti teknik kepekatan formalin-eter 78.8% dan apusan langsung 72.7%. Prevalens infeksi entamoeba histolytica dan/atau entamoeba dispar yang tinggi dalam kalangan kanak-kanak Orang Asli di Pos Sungai Rual ini berhubungkait dengan pelbagai faktor iaitu status sosioekonomi yang rendah, kekurangan pengetahuan tentang penjagaan kesihatan serta kebersihan diri yang rendah. Peningkatan prevalens infeksi dalam kajian ini juga menunjukkan pentingnya penggunaan teknik diagnostik yang lebih berkesan dalam pemeriksaan rutin bagi mendapatkan hasil diagnosis yang lebih tepat.

Matched MeSH terms: Formaldehyde
Effect of ratio of initial input materials on the liquefaction of empty fruit bunch (EFB)

Ali Ahmadzadeh, Sarani Zakaria, Maisarah Yusoff

Sains Malaysiana, 2009;38.

The liquefaction of oil palm empty fruit bunch (EFB) in phenol was carried out in the presence of sulfuric acid as a catalyst in the reflux condenser system. The effect of initial phenol input and EFB on liquefaction reaction was investigated by measuring the reaction yield, EFB residue and combined phenol. The initial ratio of phenol to EFB has the greatest influence on the residue and reaction yield. The liquefaction products consist of some liquid by products with high amount of OH groups. The amount of this byproduct is 0.5 time of the solid product (phenolic resin).

Matched MeSH terms: Formaldehyde
Blastocystis hominis: Kehadirannya di dalam sampel feses kanak-kanak orang asli di Pos Lenjang, Pahang, Malaysia

Mohamed Kamel Abd. Ghani, Hartini Yusof

Sains Malaysiana, 2011;40:1123-1127.

Blastocystis hominis merupakan antara protozoa yang paling biasa ditemui di dalam sampel feses manusia di seluruh dunia. Prevalens infeksi protozoa ini adalah lebih tinggi di kalangan mereka yang tinggal di negara membangun berbanding negara maju. Seramai 71 orang kanak-kanak Orang Asli dari Pos Lenjang, Pahang telah menjadi subjek dalam kajian ini. Bagi kajian yang lebih terperinci, kumpulan kanak-kanak ini telah dibahagikan menurut jantina dan umur. Sampel feses dikumpul dan setiap sampel diperiksa dengan menggunakan 3 teknik diagnostik iaitu teknik apusan langsung, konsentrasi formalin-eter dan perwarnaan trikrom bagi tujuan pengesanan dan pengenalpastian Blastocystis hominis. Prevalens infeksi Blastocystis hominis di kalangan kanak-kanak Orang Asli adalah sangat tinggi iaitu 93%. Kanak-kanak perempuan didapati lebih ramai terinfeksi (97.5%) berbanding kanak-kanak lelaki (87.1%) walaupun secara statistiknya tidak signifikan (p>0.05). Protozoa ini juga telah menginfeksi kesemua kanak-kanak prasekolah (100%) manakala kanak-kanak yang bersekolah turut menunjukkan prevalens infeksi yang tinggi iaitu 86.5%. Daripada segi diagnosis, teknik perwarnaan trikrom didapati paling sensitif dan ia dapat mengenalpasti kesemua (66) sampel feses yang positif dengan Blastocystis hominis. Ini diikuti dengan teknik konsentrasi formalin-eter (43 sampel) dan teknik apusan langsung (18 sampel) (p<0.05). Prevalens infeksi Blastocystis hominis yang tinggi di kalangan kanak-kanak Orang Asli adalah berhubungkait dengan pelbagai faktor termasuk status sosioekonomi yang rendah, budaya, kekurangan kemudahan asas dan tahap pengetahuan mengenai penjagaan kesihatan serta kebersihan diri yang rendah. Selain itu, peningkatan prevalens infeksi dalam kajian ini menunjukkan pentingnya penggunaan teknik diagnostik yang lebih berkesan di dalam pemeriksaan rutin bagi memperolehi hasil diagnosis yang lebih tepat.

Matched MeSH terms: Formaldehyde
Effect of filler and thermal aging on the mechanical properties of phenolated oil palm empty fruit bunch base composite

Ali Ahmadzadeh, Sarani Zakaria, Rozaidi Rasid, Sharifah Nabihah

Sains Malaysiana, 2008;37:233-237.

Biofiber is used in the polymer based composite as a renewable resource due to its positive environmental benefits, biodegradable properties, low cost and high toughness. Biocomposite was fabricated using oil palm empty fruit bunch (EFB) as filler in phenolated EFB (PEFB) matrix. Phenolated EFB (PEFB) obtained from liquefaction of EFB in phenol was used as a biopolymer to replace novolak phenolic resin which is commonly used in composite materials. Sulfuric acid was used as a catalyst in the liquefaction reaction. The effect of thermal aging and blending ratio of PEFB matrix and EFB fibers on the mechanical properties of composites has been studied. The flexural data before and after thermal aging revealed the optimum amount of EFB filler is 50% . The result showed better compatibility between EFB and PEFB when compared with EFB and commercial novolak resin.

Matched MeSH terms: Formaldehyde
Fulltext Enhancement of Oil Palm Waste Nanoparticles on the Properties and Characterization of Hybrid Plywood Biocomposites

Nuryawan A, Abdullah CK, Hazwan CM, Olaiya NG, Yahya EB, Risnasari I, et al.

Polymers (Basel), 2020 Apr 27;12(5).
PMID: 32349385 DOI: 10.3390/polym12051007

Using oil palm trunk (OPT) layered with empty fruit bunch (EFB), so-called hybrid plywood enhanced with palm oil ash nanoparticles, with phenol-formaldehyde (PF) resin as a binder, was produced in this study. The phenol-formaldehyde (PF) resins filled with different loading of oil palm ash (OPA) nanoparticles were prepared and used as glue for layers of the oil palm trunk (OPT) veneer and empty fruit bunch fibre mat. The resulting hybrid plywood produced was characterised. The physical, mechanical, thermal, and morphological properties of the hybrid plywood panels were investigated. The results obtained showed that the presence of OPA nanoparticles significantly affected the physical, mechanical, and thermal properties of the plywood panels. Significant improvements in dimension from water absorption and thickness swelling experiments were obtained for the plywood panels with the highest OPA nanoparticles loading in PF resin. The mechanical properties indicated that plywood composites showed improvement in flexural, shear, and impact properties until a certain loading of OPA nanoparticles in PF resin. Fracture surface morphology also showed the effectiveness of OPA nanoparticles in the reduction of layer breakage due to force and stress distribution. The thermal stability performance showed that PF filled OPA nanoparticles contributed to the thermal stability of the plywood panels. Therefore, the results obtained in this study showed that OPA nanoparticles certainly improved the characteristic of the hybrid plywood.

Matched MeSH terms: Formaldehyde
Eco-friendly bio-based adhesive for plywood from natural rubber latex (NRL)-blended isocyanate cross-linked starch

Soubam T, Gupta A, Jamari SS

Environ Sci Pollut Res Int, 2023 Dec;30(60):124610-124618.
PMID: 35610450 DOI: 10.1007/s11356-022-20788-9

Synthetic adhesives used in the production of plywood are a matter of concern because of the emission of carcinogenic gas formaldehyde, increased environmental pollution, and the depletion of fossil fuels. In this study, a bioadhesive composed of natural rubber latex (NRL) and rice starch was developed. However, rice starch has low moisture resistance, resulting in low adhesion. Thus, to enhance the effectiveness of NRL-blended rice starch-based bioadhesive, rice starch was cross-linked with polymeric 4,4″-diphenylmethane diisocyanate (pMDI) resin, which is an environment-friendly, formaldehyde free, and moisture resistant that is highly compatible with starch. The chemical interaction, viscosity, solid content, and gel time of the developed NRL-isocyanate cross-linked rice starch-based bioadhesive was investigated. The efficacy of the formulated bioadhesive was demonstrated by the fabrication of plywood. The presence of isocyanate and urethane capabilities in the bioadhesive formulations was confirmed by Fourier transform infrared spectroscopy (FTIR). The bioadhesive type Iso-A was discovered to have the highest viscosity of 8270 mPa.s, whereas Iso-B has the shortest gel time of 3.46 min and the highest solid content of 44%; the higher solid content accelerates the gel time. In terms of physical and mechanical properties of plywood, Iso-B has the lowest thickness swelling (TS) value of 13%, lowest water absorption (WA) value of 52% and shear strength value of 1.92 MPa, which corresponds to the ISO 12466-2-2007 standard requirements. Based on the results, NRL-blended isocyanate starch-based bioadhesive could be a good potential raw material for eco-friendly plywood industries with adequate accuracy.

Matched MeSH terms: Formaldehyde
Immunostaining of formalin-fixed, paraffin-embedded tissues for malignant lymphomas

Lim YC, Phang KS, Cheong SK

Malays J Pathol, 1992 Dec;14(2):85-9.
PMID: 1304629

With the advent of new monoclonal antibodies that are applicable to formalin-fixed, paraffin embedded sections, immunophenotyping is becoming increasingly important in the diagnosis and classification of lymphomas. However, multiple factors such as fixation, trypsinization and even type of antibodies used have certain effects on the final outcome of the staining procedure. In this paper we report our experience and the problems encountered in our laboratory when we first tried to establish a workable immunostaining protocol for formalin-fixed, paraffin embedded tissue sections using the immunoalkaline phosphatase technique.

Matched MeSH terms: Formaldehyde*
Prevention of mother-to-child transmission of hepatitis B virus: An observation of routine practice in a tertiary liver centre before and after the introduction of the global health sector strategy on viral hepatitis

Hoo CZ, Wan Abdullah WZ, Omar H, Tan SS

Med J Malaysia, 2023 Mar;78(2):234-240.
PMID: 36988536

INTRODUCTION: Worldwide, around 296 million people have hepatitis B virus (HBV) infection, most commonly transmitted from mother-to-child. Global Health Sector Strategy on Viral Hepatitis (GHSSVH) was introduced in May 2016, calling for elimination of viral hepatitis by 2030. This study aims to compare practice in a tertiary liver centre before and after GHSSVH introduction for prevention of mother-to-child transmission (MTCT).
MATERIALS AND METHODS: This retrospective cohort study was performed in a tertiary referral liver centre in Malaysia, using data from electronic medical record from January 2015 to December 2019. A total of 1457 medical records of female with HBV infection were screened. The inclusion criteria of the study were pregnant women with HBsAg positive or known to have HBV infection during the study period. We excluded patients with co-infections of other types of viral hepatitis or human immunodeficiency virus, concurrent liver diseases (e.g.: autoimmune hepatitis, Wilson’s disease), previous organ transplant and malignancy—except for hepatocellular carcinoma (HCC).
RESULTS: This study included 117 pregnancies and 21/117 (17.9%) were on antiviral therapy (AVT) for HBV. In 2017– 2019, 13/18 (72.2%) of those with HBV DNA >200,000IU/ml were on AVT, compared to 5/9 (55.6%) for 2015–2016, indicating 58% (95% CI −63% to 568%) higher odds of being on AVT in post GHSSVH group after accounting for HBV DNA.
CONCLUSION: Uptake of maternal AVT for the prevention of MTCT shows an increased trend since the introduction of GHSSVH, with room for improvement.

Matched MeSH terms: Formaldehyde/pharmacology
Frequency, size and location of apical and lateral foramina in anterior permanent teeth

Abdullah D, Kanagasingam S, Luke D

Sains Malaysiana, 2013;42:81-84.

The aim of the study was to determine the frequency, size and location of apical and lateral foramina on anterior teeth. A total of 100 anterior teeth consisting of maxillary and mandibular incisors and canines were fixed in 10% formalin. Periodontal tissue remnants were mechanically removed and teeth were stained in 2% aqueous silver nitrate. The teeth were dried and examined using a Leica MZ 7.5 zoom stereomicroscope. The size of apical and lateral foramina and their distance from the anatomical apex of the tooth were measured directly using a calibrated eyepiece scale. Accessory foramina more than 1.8 mm from the apex were regarded as lateral foramina. Eighteen percent of teeth possessed more than one apical foramen. Seven teeth (three maxillary centrals, three maxillary canines, one mandibular lateral) had 11 lateral foramina each. The mean diameter of the lateral foramina was 0.14 mm (SD = 0.08) and their mean distance from the apex was 4.49 mm (SD = 2.63, range 1.9-10.5 mm). Multiple foramina were most common on maxillary canines and least common on maxillary laterals. The mean diameter of apical foramina for all teeth possessing a single foramen was 0.35 mm (SD = 0.10) and the mean apical foramen diameter for all teeth with multiple apical foramina was 0.22 mm (SD = 0.08). Most anterior teeth possess one apical foramen and no lateral foramina; about 20% possessed more than one apical foramen and about 10% possessed one or more lateral foramina. These findings should be considered when root-treating anterior teeth.

Matched MeSH terms: Formaldehyde
Anti-inflammatory effects of Labisia pumila (Blume) F. Vill-Naves. aqueous extract

Sanusi R, Ab Shukor N, Sulaiman M

Sains Malaysiana, 2013;42:1511-1516.

This study was carried out to evaluate the anti-inflammatory effects of three concentrations of Labisia pumila (Blume) F. Vill-Naves aqueous leaf extract in rats. The effects of these extracts as anti-inflammatory agents were determined using two experiments namely formalin-induced paw licking and carrageenan-induced paw oedema test. The exposure of inflammation to various treatments resulted in significant differences between treatments in formalin-induced paw licking in rats experiment whereas in phase 2, 50 mg kg-1 of L. pumila extract showed the most significant inhibition of 82.12%, followed by 10 mg kg-1 with 76.00% and 25 mg kg-1 with 57.80%. Similarly, different treatments showed significant effects at p<0.05 in the carrageenan inducing paw oedema experiment. All treatments were able to suppress the oedema formation induced by carrageenan as compared with the control. It is evident that the anti-inflammtory effect of every concentration of L. pumila extract started as early as the first hour of carrageenan injection and showed the maximum inhibition during the fifth hour. Again, 50 mg kg-1 of L. pumila extract was found to be the best treatment that could reduce inflammation with highest inhibition of 64.59% followed by 25 mg kg-1 with 56.99% and 10 mg kg-1 with 5.55%. The result of this study has shown that these extracts of L. pumila can be effective for anti-inflammation purposes which supports and justifies traditional uses of this plant.

Matched MeSH terms: Formaldehyde
Fulltext Rheological Study of Phenol Formaldehyde Resole Resin Synthesized for Laminate Application

Kamarudin N, Awang Biak DR, Zainal Abidin Z, Cardona F, Sapuan SM

Materials (Basel), 2020 Jun 05;13(11).
PMID: 32516968 DOI: 10.3390/ma13112578

Heat explosions are sometimes observed during the synthesis of phenol formaldehyde (PF) resin. This scenario can be attributed to the high latent heat that was released and not dissipated leading to the occurrence of a runaway reaction. The synthesis temperature and time played important roles in controlling the heat release, hence preventing the resin from hardening during the synthesis process. This study aims to assess the rheological and viscoelasticity behaviors of the PF resin prepared using paraformaldehyde. The prepared PF resin was designed for laminate applications. The rheological behavior of the PF resin was assessed based on the different molar ratios of phenol to paraformaldehyde (P:F) mixed in the formulation. The molar ratios were set at 1.00:1.25, 1.00:1.50 and 1.00:1.75 of P to F, respectively. The rheological study was focused at specific synthesis temperatures, namely 40, 60, 80 and 100 °C. The synthesis time was observed for 240 min; changes in physical structure and viscosity of the PF resins were noted. It was observed that the viscosity values of the PF resins prepared were directly proportional to the synthesis temperature and the formaldehyde content. The PF resin also exhibited shear thickening behavior for all samples synthesized at 60 °C and above. For all PF resin samples synthesized at 60 °C and above, their viscoelasticity results indicated that the storage modulus (G'), loss modulus(G″) and tan δ are proportionally dependent on both the synthesis temperature and the formaldehyde content. Heat explosions were observed during the synthesis of PF resin at the synthesis temperature of 100 °C. This scenario can lead to possible runaway reaction which can also compromise the safety of the operators.

Matched MeSH terms: Formaldehyde
Fulltext Detection of epidermal growth factor receptor mutations in formalin fixed paraffin embedded biopsies in Malaysian non-small cell lung cancer patients

Shi Yeen TN, Pathmanathan R, Shiran MS, Ahmad Zaid FA, Cheah YK

J Biomed Sci, 2013 Apr 16;20:22.
PMID: 23590575 DOI: 10.1186/1423-0127-20-22

BACKGROUND: Somatic mutations of the epidermal growth factor receptor (EGFR) are reportedly associated with various responses in non-small cell lung cancer (NSCLC) patients receiving the anti-EGFR agents. Detection of the mutation therefore plays an important role in therapeutic decision making. The aim of this study was to detect EGFR mutations in formalin fixed paraffin embedded (FFPE) samples using both Scorpion ARMS and high resolution melt (HRM) assay, and to compare the sensitivity of these methods.
RESULTS: All of the mutations were found in adenocarcinoma, except one that was in squamous cell carcinoma. The mutation rate was 45.7% (221/484). Complex mutations were also observed, wherein 8 tumours carried 2 mutations and 1 tumour carried 3 mutations.
CONCLUSIONS: Both methods detected EGFR mutations in FFPE samples. HRM assays gave more EGFR positive results compared to Scorpion ARMS.

Matched MeSH terms: Formaldehyde/metabolism; Formaldehyde/chemistry*
Fulltext Detection of formaldehyde in water: a shape-effect on the plasmonic sensing properties of the gold nanoparticles

Nengsih S, Umar AA, Salleh MM, Oyama M

Sensors (Basel), 2012;12(8):10309-25.
PMID: 23112601 DOI: 10.3390/s120810309

The effect of morphology on the plasmonic sensing of the presence of formaldehyde in water by gold nanostructures has been investigated. The gold nanostructures with two different morphologies, namely spherical and rod, were prepared using a seed-mediated method. In typical results, it was found that the plasmonic properties of gold nanostructures were very sensitive to the presence of formaldehyde in their surrounding medium by showing the change in both the plasmonic peaks position and the intensity. Spherical nanoparticles (GNS), for example, indicated an increase in the sensitivity when the size was increased from 25 to 35 nm and dramatically decreased when the size was further increased. An m value, the ratio between plasmonic peak shift and refractive index change, as high as 36.5 nm/RIU (refractive index unit) was obtained so far. An expanded sensing mode to FD was obtained when gold nanostructures with nanorods morphology (GNR) were used because of the presence of two plasmonic modes for response probing. However, in the present study, effective plasmonic peak shift was not observed due to the intense plasmonic coupling of closely packed nanorod structures on the surface. Nevertheless, the present results at least provide a potential strategy for response enhancement via shape-effects. High performance plasmonic sensors could be obtained if controlled arrays of nanorods can be prepared on the surface.

Matched MeSH terms: Formaldehyde/analysis*; Formaldehyde/chemistry

Filters

Please provide feedback to Administrator ([email protected])

External Links