Displaying publications 1 - 20 of 77 in total

Abstract:
Sort:
  1. Abdullah F, Jaafar MH, Ahmad MI, Ismail ZS
    Int J Environ Health Res, 2024 May;34(5):2280-2298.
    PMID: 37552824 DOI: 10.1080/09603123.2023.2243843
    In Malaysia, chemical management in workplaces is managed under the Occupational Safety and Health Act 1994. Hence, the introduction of the Occupational Safety and Health (Use and Standards of Exposure of Chemicals Hazardous to Health) Regulations 2000 has strengthened the chemical management level in workplaces, including higher academic institutions. The introduction of chemical health risk assessment through the regulation required management to conduct the assessment at workplaces. Poor levels of Indoor Air Quality (IAQ) in chemical laboratories may also cause discomfort among workers when there is sick building syndrome in laboratories. IAQ is managed through the Industry Code of Practice on Indoor Air Quality 2010. Although both are different in method and approach, both are meant to ensure the workers' safety and comfort. This study is aimed to investigate the need to integrate both chemical health risk assessment and IAQ assessment in laboratories to ensure optimum safety levels among workers.
    Matched MeSH terms: Air Pollution, Indoor*
  2. Vilcins D, Christofferson RC, Yoon JH, Nazli SN, Sly PD, Cormier SA, et al.
    Ann Glob Health, 2024;90(1):9.
    PMID: 38312715 DOI: 10.5334/aogh.4363
    BACKGROUND: The United Nations has declared that humans have a right to clean air. Despite this, many deaths and disability-adjusted life years are attributed to air pollution exposure each year. We face both challenges to air quality and opportunities to improve, but several areas need to be addressed with urgency.

    OBJECTIVE: This paper summarises the recent research presented at the Pacific Basin Consortium for Environment and Health Symposium and focuses on three key areas of air pollution that are important to human health and require more research.

    FINDINGS AND CONCLUSION: Indoor spaces are commonly places of exposure to poor air quality and are difficult to monitor and regulate. Global climate change risks worsening air quality in a bi-directional fashion. The rising use of electric vehicles may offer opportunities to improve air quality, but it also presents new challenges. Government policies and initiatives could lead to improved air and environmental justice. Several populations, such as older people and children, face increased harm from air pollution and should become priority groups for action.

    Matched MeSH terms: Air Pollution, Indoor*
  3. Ibrahim F, Samsudin EZ, Ishak AR, Sathasivam J
    Front Public Health, 2022;10:1067764.
    PMID: 36424957 DOI: 10.3389/fpubh.2022.1067764
    Indoor air quality (IAQ) has recently gained substantial traction as the airborne transmission of infectious respiratory disease becomes an increasing public health concern. Hospital indoor environments are complex ecosystems and strategies to improve hospital IAQ require greater appreciation of its potentially modifiable determinants, evidence of which are currently limited. This mini-review updates and integrates findings of previous literature to outline the current scientific evidence on the relationship between hospital IAQ and building design, building operation, and occupant-related factors. Emerging evidence has linked aspects of building design (dimensional, ventilation, and building envelope designs, construction and finishing materials, furnishing), building operation (ventilation operation and maintenance, hygiene maintenance, access control for hospital users), and occupants' characteristics (occupant activities, medical activities, adaptive behavior) to hospital IAQ. Despite the growing pool of IAQ literature, some important areas within hospitals (outpatient departments) and several key IAQ elements (dimensional aspects, room configurations, building materials, ventilation practices, adaptive behavior) remain understudied. Ventilation for hospitals continues to be challenging, as elevated levels of carbon monoxide, bioaerosols, and chemical compounds persist in indoor air despite having mechanical ventilation systems in place. To curb this public health issue, policy makers should champion implementing hospital IAQ surveillance system for all areas of the hospital building, applying interdisciplinary knowledge during the hospital design, construction and operation phase, and training of hospital staff with regards to operation, maintenance, and building control manipulation. Multipronged strategies targeting these important determinants are believed to be a viable strategy for the future control and improvement of hospital IAQ.
    Matched MeSH terms: Air Pollution, Indoor*
  4. Suppian R, Vegandraj S, Kandaiya S
    Int J Rad Appl Instrum A, 1992 Jul;43(7):937-8.
    PMID: 1321104
    Pumping air through a soft tissue which acts as a membrane is a relatively easy and quick method to collect and measure radon/thoron and its daughter nuclides in air. Analysis of the activity of the radionuclides can be calculated using an alpha counter which has been calibrated. In this method the activity of radon/thoron cannot be separated from the activity of radionuclides already present in the aerosol or dust particles.
    Matched MeSH terms: Air Pollution, Indoor/analysis*
  5. Sakai N, Yamamoto S, Matsui Y, Khan MF, Latif MT, Ali Mohd M, et al.
    Sci Total Environ, 2017 May 15;586:1279-1286.
    PMID: 28236484 DOI: 10.1016/j.scitotenv.2017.02.139
    Volatile Organic Compounds (VOCs) in indoor air were investigated at 39 private residences in Selangor State, Malaysia to characterize the indoor air quality and to identify pollution sources. Twenty-two VOCs including isomers (14 aldehydes, 5 aromatic hydrocarbons, acetone, trichloroethylene and tetrachloroethylene) were collected by 2 passive samplers for 24h and quantitated using high performance liquid chromatography and gas chromatography mass spectrometry. Source profiling based on benzene/toluene ratio as well as statistical analysis (cluster analysis, bivariate correlation analysis and principal component analysis) was performed to identify pollution sources of the detected VOCs. The VOCs concentrations were compared with regulatory limits of air quality guidelines in WHO/EU, the US, Canada and Japan to clarify the potential health risks to the residents. The 39 residences were classified into 2 groups and 2 ungrouped residences based on the dendrogram in the cluster analysis. Group 1 (n=30) had mainly toluene (6.87±2.19μg/m3), formaldehyde (16.0±10.1μg/m3), acetaldehyde (5.35±4.57μg/m3) and acetone (11.1±5.95μg/m3) at background levels. Group 2 (n=7) had significantly high values of formaldehyde (99.3±10.7μg/m3) and acetone (35.8±12.6μg/m3), and a tendency to have higher values of acetaldehyde (23.7±13.5μg/m3), butyraldehyde (3.35±0.41μg/m3) and isovaleraldehyde (2.30±0.39μg/m3). The 2 ungrouped residences showed particularly high concentrations of BTX (benzene, toluene and xylene: 235μg/m3 in total) or acetone (133μg/m3). The geometric mean value of formaldehyde (19.2μg/m3) exceeded an 8-hour regulatory limit in Canada (9μg/m3), while those in other compounds did not exceed any regulatory limits, although a few residences exceeded at least one regulatory limit of benzene or acetaldehyde. Thus, the VOCs in the private residences were effectively characterized from the limited number of monitoring, and the potential health risks of the VOCs exposure, particularly formaldehyde, should be considered in the study area.
    Matched MeSH terms: Air Pollution, Indoor/analysis*
  6. Yap HS, Roberts AC, Luo C, Tan Z, Lee EH, Thach TQ, et al.
    Indoor Air, 2021 11;31(6):2239-2251.
    PMID: 34096640 DOI: 10.1111/ina.12863
    Space is a resource that is constantly being depleted, especially in mega-cities. Underground workspaces (UGS) are increasingly being included in urban plans and have emerged as an essential component of vertical cities. While progress had been made on the engineering aspects associated with the development of high-quality UGS, public attitudes toward UGS as work environments (ie, the public's design concerns with UGS) are relatively unknown. Here, we present the first large-scale study examining preferences and attitudes toward UGS, surveying close to 2000 participants from four cities in three continents (Singapore, Shanghai, London, and Montreal). Contrary to previous beliefs, air quality (and not lack of windows) is the major concern of prospective occupants. Windows, temperature, and lighting emerged as additional important building performance aspects for UGS. Early adopters (ie, individuals more willing to accept UGS and thus more likely to be the first occupants) across all cities prioritized air quality. Present results suggest that (perceived) air quality is a key building performance aspect for UGS that needs to be communicated to prospective occupants as this will improve their attitudes and views toward UGS. This study highlights the importance of indoor air quality for the public.
    Matched MeSH terms: Air Pollution, Indoor*
  7. Arsad FS, Hod R, Ahmad N, Baharom M, Ja'afar MH
    Environ Sci Pollut Res Int, 2023 Jun;30(29):73137-73149.
    PMID: 37211568 DOI: 10.1007/s11356-023-27089-9
    Thermal comfort is linked to our health, well-being, and productivity. The thermal environment is one of the main factors that influence thermal comfort and, consequently, the productivity of occupants inside buildings. Meanwhile, behavioural adaptation is well known to be the most critical contributor to the adaptive thermal comfort model. This systematic review aims to provide evidence regarding indoor thermal comfort temperature and related behavioural adaptation. Studies published between 2010 and 2022 examining indoor thermal comfort temperature and behavioural adaptations were considered. In this review, the indoor thermal comfort temperature ranges from 15.0 to 33.8 °C. The thermal comfort temperature range varied depending on several factors, such as climatic features, ventilation mode, type of buildings, and age of the study population. Elderly and younger children have distinctive thermal acceptability. Clothing adjustment, fan usage, AC usage, and open window were the most common adaptive behaviour performed. Evidence shows that behavioural adaptations were also influenced by climatic features, ventilation mode, type of buildings, and age of the study population. Building designs should incorporate all factors that affect the thermal comfort of the occupants. Awareness of practical behavioural adaptations is crucial to ensure occupants' optimal thermal comfort.
    Matched MeSH terms: Air Pollution, Indoor*
  8. Tian Y
    J Health Popul Nutr, 2023 Nov 08;42(1):125.
    PMID: 37941052 DOI: 10.1186/s41043-023-00465-4
    The creation of a welcoming hospital atmosphere is necessary to improve patient wellbeing and encourage healing. The goal of this study was to examine the variables affecting hospitalised patients' comfort. The study procedure included a thorough search of the Web of Science and Scopus databases, as well as the use of software analytic tools to graphically map enormous literature data, providing a deeper understanding of the linkages within the literature and its changing patterns. Insights from a range of disciplines, including engineering, psychology, immunology, microbiology, and environmental science, were included into our study using content analysis and clustering approaches. The physical environment and the social environment are two crucial factors that are related to patient comfort. The study stress the need of giving patient comfort a top priority as they heal, especially by tackling indoor air pollution. Our research also emphasises how important hospital care and food guidelines are for improving patient comfort. Prioritising patients who need specialised care and attention, especially those who have suffered trauma, should be the focus of future study. Future research in important fields including trauma, communication, hospital architecture, and nursing will be built on the findings of this study. To enhance research in these crucial areas, worldwide collaboration between experts from other nations is also advised. Although many studies stress the significance of patient comfort, few have drawn conclusions from a variety of disciplines, including medicine, engineering, immunology, microbiology, and environmental science, the most crucial issue of thoroughly researching the improvement of patient comfort has not been addressed. Healthcare workers, engineers, and other professions will benefit greatly from this study's investigation of the connection between hospital indoor environments and patient comfort.
    Matched MeSH terms: Air Pollution, Indoor*
  9. Syazwan A, Rafee BM, Hafizan J, Azman A, Nizar A, Izwyn Z, et al.
    PMID: 22570579 DOI: 10.2147/RMHP.S26567
    To meet the current diversified health needs in workplaces, especially in nonindustrial workplaces in developing countries, an indoor air quality (IAQ) component of a participatory occupational safety and health survey should be included.
    Matched MeSH terms: Air Pollution, Indoor
  10. Saad SM, Andrew AM, Shakaff AY, Saad AR, Kamarudin AM, Zakaria A
    Sensors (Basel), 2015;15(5):11665-84.
    PMID: 26007724 DOI: 10.3390/s150511665
    Monitoring indoor air quality (IAQ) is deemed important nowadays. A sophisticated IAQ monitoring system which could classify the source influencing the IAQ is definitely going to be very helpful to the users. Therefore, in this paper, an IAQ monitoring system has been proposed with a newly added feature which enables the system to identify the sources influencing the level of IAQ. In order to achieve this, the data collected has been trained with artificial neural network or ANN--a proven method for pattern recognition. Basically, the proposed system consists of sensor module cloud (SMC), base station and service-oriented client. The SMC contain collections of sensor modules that measure the air quality data and transmit the captured data to base station through wireless network. The IAQ monitoring system is also equipped with IAQ Index and thermal comfort index which could tell the users about the room's conditions. The results showed that the system is able to measure the level of air quality and successfully classify the sources influencing IAQ in various environments like ambient air, chemical presence, fragrance presence, foods and beverages and human activity.
    Matched MeSH terms: Air Pollution, Indoor
  11. Amir Abdullah, M.D., Abdullah, A.H., Leman, A.M.
    MyJurnal
    Indoor air quality has been a major public concern recently. Several health effects are related to this problem.
    Findings from several studies have shown MVAC system as the main contributor for IAQ problem. Good practice of
    maintenance and servicing is important to maintain MVAC system, especially the filter. Good air filtration for MVAC
    system is needed to make sure adequate air is received by the occupants. This paper illustrated a recent study of air
    filtration for MVAC system especially for several industries that used MVAC system in their premises. This paper also
    proposed an air filtration study for a better air quality. Several Acts and Regulations related to Safety and Health were
    identified to create the framework for the proposed study. Air filtration technique was used in this preliminary study
    to set up guidelines to create safe and clean indoor spaces for workers and occupants.
    Matched MeSH terms: Air Pollution, Indoor
  12. Syazwan A, Rafee BM, Juahir H, Azman A, Nizar A, Izwyn Z, et al.
    Drug Healthc Patient Saf, 2012;4:107-26.
    PMID: 23055779 DOI: 10.2147/DHPS.S33400
    To analyze and characterize a multidisciplinary, integrated indoor air quality checklist for evaluating the health risk of building occupants in a nonindustrial workplace setting.
    Matched MeSH terms: Air Pollution, Indoor
  13. Li TC, Ambu S, Mohandas K, Wah MJ, Sulaiman LH, Murgaiyah M
    Trop Biomed, 2014 Sep;31(3):540-56.
    PMID: 25382482 MyJurnal
    Airborne bacteria are significant biotic constituents of bioaerosol. Bacteria at high concentrations in the air can compromise indoor air quality (IAQ) and result in many diseases. In tropical environments like Malaysia that extensively utilize air-conditioning systems, this is particularly significant due to continuous recirculation of indoor air and the potential implications for human health. Currently, there is a lack of knowledge regarding the impact of airborne bacteria on IAQ in Malaysia. This study was prompted by a need for reliable baseline data on airborne bacteria in the indoor environment of tropical equatorial Malaysia, that may be used as a reference for further investigations on the potential role played by airborne bacteria as an agent of disease in this region. It was further necessitated due to the threat of bioterrorism with the potentiality of release of exotic pathogenic microorganisms into indoor or outdoor air. Before scientists can detect the latter, a gauge of the common microorganisms in indoor (as well as outdoor) air needs to be ascertained, hence the expediency of this study. Bacterial counts from the broad-based and targeted study were generally in the order of 10(2) colony-forming units (CFU) per m(3) of air. The most prevalent airborne bacteria found in the broad-based study that encompassed all five levels of the building were Gram-positive cocci (67.73%), followed by Gram-positive rods (24.26%) and Gram-negative rods (7.10%). Gram-negative cocci were rarely detected (0.71%). Amongst the genera identified, Kytococcus sp., Micrococcus sp., Staphylococcus sp., Leifsonia sp., Bacillus sp. and Corynebacterium sp. predominated in indoor air. The most dominant bacterial species were Kytococcus sedentarius, Staphylococcus epidermidis and Micrococcus luteus. The opportunistic and nosocomial pathogen, Stenotrophomonas maltophilia was also discovered at a high percentage in the cafeteria. The bacteria isolated in this study have been increasingly documented to cause opportunistic infections in immuno-compromised patients, sometimes with fatal outcomes. Furthermore, some of them are becoming increasingly resistant to antibiotics. Hence, we propose that indoor reservoirs of these bacteria and their associated clinical and more subtle health effects, if any, be investigated further.
    Matched MeSH terms: Air Pollution, Indoor*
  14. Tan H, Othman MHD, Kek HY, Chong WT, Nyakuma BB, Wahab RA, et al.
    Environ Sci Pollut Res Int, 2024 Jul;31(32):44463-44488.
    PMID: 38943001 DOI: 10.1007/s11356-024-34075-2
    Indoor air quality (IAQ) in the built environment is significantly influenced by particulate matter, volatile organic compounds, and air temperature. Recently, the Internet of Things (IoT) has been integrated to improve IAQ and safeguard human health, comfort, and productivity. This review seeks to highlight the potential of IoT integration for monitoring IAQ. Additionally, the paper details progress by researchers in developing IoT/mobile applications for IAQ monitoring, and their transformative impact in smart building, healthcare, predictive maintenance, and real-time data analysis systems. It also outlines the persistent challenges (e.g., data privacy, security, and user acceptability), hampering effective IoT implementation for IAQ monitoring. Lastly, the global developments and research landscape on IoT for IAQ monitoring were examined through bibliometric analysis (BA) of 106 publications indexed in Web of Science from 2015 to 2022. BA revealed the most significant contributing countries are India and Portugal, while the top productive institutions and researchers are Instituto Politecnico da Guarda (10.37% of TP) and Marques Goncalo (15.09% of TP), respectively. Keyword analysis revealed four major research themes: IoT, pollution, monitoring, and health. Overall, this paper provides significant insights for identifying prospective collaborators, benchmark publications, strategic funding, and institutions for future IoT-IAQ researchers.
    Matched MeSH terms: Air Pollution, Indoor*
  15. Abidin EZ, Hashim Z, Semple S
    Asian Pac J Cancer Prev, 2013;14(11):6845-50.
    PMID: 24377615
    BACKGROUND: This study was performed to gather data on second-hand smoke (SHS) concentrations in a range of public venues following the implementation of partial Smoke-Free Legislation in Malaysia in 2004.

    MATERIALS AND METHODS: PM2.5 was measured as a marker of SHS levels in a total of 61 restaurants, entertainment centres, internet cafes and pubs in Kuala Lumpur, Malaysia.

    RESULTS: Under the current smoke-free laws smoking was prohibited in 42 of the 61 premises. Active smoking was observed in nearly one-third (n=12) of these. For premises where smoking was prohibited and no active smoking observed, the mean (standard deviation) indoor PM2.5 concentration was 33.4 (23.8) μg/m3 compared to 187.1 (135.1) μg/m3 in premises where smoking was observed The highest mean PM2.5 was observed in pubs [361.5 (199.3) μg/m3].

    CONCLUSIONS: This study provides evidence of high levels of SHS across a range of hospitality venues, including about one-third of those where smoking is prohibited, despite 8 years of smoke-free legislation. Compliance with the legislation appeared to be particularly poor in entertainment centres and internet cafes. Workers and non-smoking patrons continue to be exposed to high concentrations of SHS within the hospitality industry in Malaysia and there is an urgent need for increased enforcement of existing legislation and consideration of more comprehensive laws to protect health.

    Matched MeSH terms: Air Pollution, Indoor/analysis*; Air Pollution, Indoor/legislation & jurisprudence; Air Pollution, Indoor/prevention & control
  16. Chong KC, Lai SO, Lau WJ, Thiam HS, Ismail AF, Roslan RA
    Polymers (Basel), 2018 Jan 28;10(2).
    PMID: 30966162 DOI: 10.3390/polym10020126
    Air pollution is a widely discussed topic amongst the academic and industrial spheres as it can bring adverse effects to human health and economic loss. As humans spend most of their time at the office and at home, good indoor air quality with enriched oxygen concentration is particularly important. In this study, polysulfone (PSF) hollow fiber membranes fabricated by dry-jet wet phase inversion method were coated by a layer of polydimethylsiloxane (PDMS) or poly(ether block amide) (PEBAX) at different concentrations and used to evaluate their performance in gas separation for oxygen enrichment. The surface-coated membranes were characterized using SEM and EDX to determine the coating layer thickness and surface chemical properties, respectively. Results from the gas permeation study revealed that the PSF membrane coated with PDMS offered higher permeance and selectivity compared to the membrane coated with PEBAX. The best performing PDMS-coated membrane demonstrated oxygen and nitrogen gas permeance of 18.31 and 4.01 GPU, respectively with oxygen/nitrogen selectivity of 4.56. Meanwhile, the PEBAX-coated membrane only showed 12.23 and 3.11 GPU for oxygen and nitrogen gas, respectively with a selectivity of 3.94. It can be concluded the PDMS coating is more promising for PSF hollow fiber membrane compared to the PEBAX coating for the oxygen enrichment process.
    Matched MeSH terms: Air Pollution, Indoor
  17. Foo, Ming Hui
    MyJurnal
    In this era, most of us are suffering some level of respiratory problem. Respiratory system of our children is even more sensitive compare to adults. As our children spending an average of 8 hours in school, indoor air quality of the classroom become an important element. Many studies have shown that indoor air quality not only affecting the respiratory system of schoolchildren but their performance in academy as well.
    Matched MeSH terms: Air Pollution, Indoor
  18. Ahmad Sayuti Zainal Abidin, Leman, A.M., Nor Mohd Razif Noraini
    MyJurnal
    This study intended to investigate the level on airborne microbe in indoor air for new constructed building. It was divided by three different phase of building commissioning in Bandar Baru Bangi, Selangor. The first phase of the sampling was carried out after the building fully handed over from the main contractor to the building owner. Second phase of the sampling take place after the building is equipped with furniture. Phase three sampling is conducted after one month of building occupancy. Airborne microbes’ concentrations were determined by using a single stage impactor (Biosampler) as per requirement of National Institute of Occupational Safety and Health (NIOSH) method, NIOSH Manual Analytical Method MAM 0800. The total concentration of airborne bacteria and fungi were average to 641 and 38 CFU/m³ in the first phase, 133 and 117 CFU/m³ in the second phase, and 389 and 52 CFU/m³ in the third phase. These findings indicate that although a new constructed building should be having a significant background level of airborne microbe (total bacteria and total fungi). The building owner should be aware to their indoor air status to protect the occupant from the safety and health problem (risk) especially for ventilated building.
    Matched MeSH terms: Air Pollution, Indoor
  19. Mohd Mahathir Suhaimi Shamsuri, Leman, A.M., Azian Hariri, Azizi Afandi
    MyJurnal
    The cultivation of indoor plants in indoor environment has become a topic of interest among researchers worldwide for its
    potential to improve indoor air quality (IAQ). However, the adaptations of environmental factor of each plant need to be investigated
    to correspond with the native environment. The study investigate the capability of plants selected to live indoor. Before experiment was
    conducted, all plants selected were assimilated with indoor environment for two months. Photosynthesis proses in this experiment will
    be a guidance to determine the comparative for every plant. The portable photosynthesis system equipment (LI-COR 6400) was used to
    determine the level of photosynthesis rate for each of plants. Accordingly, among of all plants tested, Spider Plant showed less effective
    to be grown with indoor environment by the rate of photosynthesis value up to -0.15. Moreover, light compensation point (LCP) of
    Spider Plant also indicated the light intensity consumption was 2960 lux which is extremely higher than 300 lux. As a conclusion, only
    six plants in this study which are Anthurium, Dumb Cane, Golden Pothos, Kadaka Fern, Prayer Plant, and Syngonium are able to
    survive with indoor environment. In the next stage of study, this six plants may give good results to enhance the IAQ.
    Matched MeSH terms: Air Pollution, Indoor
  20. Lee J, Lim S, Lee K, Guo X, Kamath R, Yamato H, et al.
    Int J Hyg Environ Health, 2010 Sep;213(5):348-51.
    PMID: 20542729 DOI: 10.1016/j.ijheh.2010.05.007
    Exposure to secondhand smoke (SHS) is a major threat to public health. Asian countries having the highest smoking prevalence are seriously affected by SHS. The objective of the study was to measure SHS levels in hospitality venues in seven Asian countries and to compare the SHS exposure to the levels in Western countries. The study was carried out in four types of related hospitality venues (restaurant, café, bar/club and entertainment) in China, India, Japan, Korea, Malaysia, Pakistan and Sri Lanka. Real-time measurement of particulate matter of <2.5microm aerodynamic diameter (PM(2.5)) was made during business hour using a handheld laser operated monitor. A total of 168 venues were measured in seven countries. The average indoor PM(2.5) level was 137microg/m(3), ranging from 46microg/m(3) in Malaysia to 207microg/m(3) in India. Bar/club had the highest PM(2.5) level of 191microg/m(3) and restaurants had the lowest PM(2.5) level of 92microg/m(3). The average indoor PM(2.5) level in smoking venues was 156micro/m(3), which was 3.6 times higher than non-smoking venues (43microg/m(3)). Indoor PM(2.5) levels were significantly associated with country, type of venue, smoking density and air exchange rate (p<0.05). In the seven Asian countries, PM(2.5) levels were high due to SHS in public places. The current levels are comparable to the levels in Western countries before the adoption of smoke-free policy. Since Asian country has high prevalence of SHS in public places, there is an urgent need for comprehensive smoke-free regulation in Asian countries.
    Matched MeSH terms: Air Pollution, Indoor/analysis; Air Pollution, Indoor/statistics & numerical data*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links