MyMedR

Displaying all 3 publications

Abstract:

Sort:

Performance of pilot scale anaerobic biofilm digester (ABD) for the treatment of leachate from a municipal waste transfer station

Arij Y, Fatihah S, Rakmi AR

Bioresour Technol, 2018 Jul;260:213-220.
PMID: 29626780 DOI: 10.1016/j.biortech.2018.03.131

The anaerobic treatment of leachate from a municipal waste transfer station in Malaysia was tested using a pilot scale anaerobic biofilm digester system that was operated under HRT sequence of 30-day, 25-day, 20-day and 10-day for 163 days under mesophilic conditions. Despite the leachate's complex characteristics, the system showed great performance given its maximum COD, BOD5 and total phosphorus removal efficiencies of 98 ± 1%, 99 ± 1% and 92 ± 9% respectively. The system was stable throughout its operation and showed optimal average values for the monitored parameters such as pH (7.53 ± 0.14), total VFA (79 ± 66 mg HOAc/L), alkalinity (10,919 ± 1556 mg CaCO3/L) and a non-toxic value for accumulated ammonia (960 ± 106 mg NH3-N/L). Measurement of the average daily biogas production yielded a value of 25 ± 1 m3/day throughout the system's operation with a composition of 57 ± 12% methane and 26 ± 6% carbon dioxide.
Fulltext Kinetic evaluation of a partially packed upflow anaerobic fixed film reactor treating low-strength synthetic rubber wastewater

Nor Faekah I, Fatihah S, Mohamed ZS

Heliyon, 2020 Mar;6(3):e03594.
PMID: 32258460 DOI: 10.1016/j.heliyon.2020.e03594

A bench-scale model of a partially packed upflow anaerobic fixed film (UAF) reactor was set up and operated at five different hydraulic retention times (HRTs) of (17, 14, 10, 8, and 5) days. The reactor was fed with synthetic rubber wastewater consisting of a chemical oxygen demand (COD) concentration of 6355-6735 mg/L. The results were analyzed using the Monod model, the Modified Stover-Kincannon models, and the Grau Second-Order Model. The Grau Second-Order model was found to best fit the experimental data. The biokinetic constant values, namely the growth yield coefficient (Y) and the endogenous coefficient (Kd) were 0.027 g VSS/g COD and 0.1705 d-1, respectively. The half-saturation constant (Ks) and maximum substrate utilization rate (K) returned values of 84.1 mg/L and 0.371 d-1, respectively, whereas the maximum specific growth rate of the microorganism (μmax) was 0.011 d-1. The constants, Umax and KB, of the Stover-Kincannon model produced values of 6.57 g/L/d and 6.31 g/L/d, respectively. Meanwhile, the average second-order substrate removal rate, ks(2), was 105 d-1. These models gave high correlation coefficients with the value of R2 = 80-99% and these indicated that these models can be used in designing UAF reactor consequently predicting the behaviour of the reactor.
Histological Characteristics on the Testes of Mud Spiny Lobster, Panulirus polyphagus (Herbst, 1793)

Nor Fatihah S, Muhd-Farouk H, Amin-Safwan A, Hafiz Mahsol H, Ikhwanuddin M

Pak J Biol Sci, 2017;20(7):365-371.
PMID: 29023069 DOI: 10.3923/pjbs.2017.365.371

BACKGROUND AND OBJECTIVE: Mud spiny lobsters, Panulirus polyphagus (P. polyphagus) are one of the most important fisheries resources now-a-days due to quality that it's possessed. However, there is still lack of in-depth study about this species mainly on males testicular characteristics and sexual maturity size. Therefore, the present study was carried out to investigate the histological characteristics on the testes and sexual maturity sizes of mud spiny lobster, Panulirus polyphagus.
MATERIALS AND METHODS: The testes were dissected out and fixed in 10% buffered formalin solution for 11 h, dehydrated in 70% alcohol and lastly placed in tissue processor for 18±1 h at 60°C. The tissues blocks were cut at the thickness of 4 μm on a rotary microtome. Stained tissues were taken under Advance Microscope (Nikon Eclipse 80i Nomarski DIC). Collected data were analyzed using Microsoft Excel 2013. Data were presented as mean±standard deviation. Statistical analyses were done using one-way ANOVA using SPSS (Version 22).
RESULTS: These lobules of mature P. polyphagus were formed via different germinative lineage cells such as spermatogonia, spermatocytes, spermatids and spermatozoa. The histological characteristics of testes showed that the process of spermatogenesis went through the stages of four testes maturation which were spermatogonia I and II, spermatocytes I and II, spermatids and spermatozoa stages within different body weight of P. polyphagus. It was found that there were significant difference between body weight and carapace length to the testicular maturation stages (one-way ANOVA and p = 0.000).
CONCLUSION: The results of this experiment indicated that males P. polyphagus have four stages of testes maturation and can be considered to have fully mature testes that ready for fertilization at 452 g body weight (BW) and 107 mm carapace length (CL) or more.

Filters

Please provide feedback to Administrator ([email protected])

External Links