MyMedR

Displaying all 18 publications

Abstract:

Sort:

Fulltext CFD study on NACA 4415 airfoil implementing spherical and sinusoidal Tubercle Leading Edge

Aftab SMA, Ahmad KA

PLoS One, 2017;12(8):e0183456.
PMID: 28850622 DOI: 10.1371/journal.pone.0183456

The Humpback whale tubercles have been studied for more than a decade. Tubercle Leading Edge (TLE) effectively reduces the separation bubble size and helps in delaying stall. They are very effective in case of low Reynolds number flows. The current Computational Fluid Dynamics (CFD) study is on NACA 4415 airfoil, at a Reynolds number 120,000. Two TLE shapes are tested on NACA 4415 airfoil. The tubercle designs implemented on the airfoil are sinusoidal and spherical. A parametric study is also carried out considering three amplitudes (0.025c, 0.05c and 0.075c), the wavelength (0.25c) is fixed. Structured mesh is utilized to generate grid and Transition SST turbulence model is used to capture the flow physics. Results clearly show spherical tubercles outperform sinusoidal tubercles. Furthermore experimental study considering spherical TLE is carried out at Reynolds number 200,000. The experimental results show that spherical TLE improve performance compared to clean airfoil.
Fulltext Hybrid mesh for nasal airflow studies

Zubair M, Abdullah MZ, Ahmad KA

Comput Math Methods Med, 2013;2013:727362.
PMID: 23983811 DOI: 10.1155/2013/727362

The accuracy of the numerical result is closely related to mesh density as well as its distribution. Mesh plays a very significant role in the outcome of numerical simulation. Many nasal airflow studies have employed unstructured mesh and more recently hybrid mesh scheme has been utilized considering the complexity of anatomical architecture. The objective of this study is to compare the results of hybrid mesh with unstructured mesh and study its effect on the flow parameters inside the nasal cavity. A three-dimensional nasal cavity model is reconstructed based on computed tomographic images of a healthy Malaysian adult nose. Navier-Stokes equation for steady airflow is solved numerically to examine inspiratory nasal flow. The pressure drop obtained using the unstructured computational grid is about 22.6 Pa for a flow rate of 20 L/min, whereas the hybrid mesh resulted in 17.8 Pa for the same flow rate. The maximum velocity obtained at the nasal valve using unstructured grid is 4.18 m/s and that with hybrid mesh is around 4.76 m/s. Hybrid mesh reported lower grid convergence index (GCI) than the unstructured mesh. Significant differences between unstructured mesh and hybrid mesh are determined highlighting the usefulness of hybrid mesh for nasal airflow studies.
Fulltext Standardization of Malaysian adult female nasal cavity

Lee CF, Abdullah MZ, Ahmad KA, Lutfi Shuaib I

Comput Math Methods Med, 2013;2013:519071.
PMID: 23840279 DOI: 10.1155/2013/519071

This research focuses on creating a standardized nasal cavity model of adult Malaysian females. The methodology implemented in this research is a new approach compared to other methods used by previous researchers. This study involves 26 females who represent the test subjects for this preliminary study. Computational fluid dynamic (CFD) analysis was carried out to better understand the characteristics of the standardized model and to compare it to the available standardized Caucasian model. This comparison includes cross-sectional areas for both half-models as well as velocity contours along the nasal cavities. The Malaysian female standardized model is larger in cross-sectional area compared to the standardized Caucasian model thus leading to lower average velocity magnitudes. The standardized model was further evaluated with four more Malaysian female test subjects based on its cross-sectional areas and average velocity magnitudes along the nasal cavities. This evaluation shows that the generated model represents an averaged and standardized model of adult Malaysian females.
Fulltext T4-like coliphage ΦKAZ14 virulent to pathogenic and extended spectrum β-lactamase-producing Escherichia coli of poultry origin

Ahmad KA, Mohanmmed AS, Abas F, Chin SC

Virol Sin, 2015 Feb;30(1):73-5.
PMID: 25662886 DOI: 10.1007/s12250-014-3541-8
Fulltext Recurrent paediatric supratentorial extraventricular ependymoma associated with genetic mutation at exon 4 of p53 gene

Ghani AR, Abdullah JM, Ghazali M, Ahmad F, Ahmad KA, Madhavan M

Singapore Med J, 2008 Jul;49(7):e192-4.
PMID: 18695856

Recurrent supratentorial extraventricular ependymoma in a four-year-old Malay boy treated twice surgically in combination with cranial radiotherapy is reported. He presented with symptoms of raised intracranial pressure and a history of focal seizure. Computed tomography of the brain showed a left supratentorial extraventricular cystic lesion causing a mass effect. The tumour histology was ependymoma (WHO grade II). The clinical course, radiological characteristics and management of this tumour are discussed. Molecular genetic analysis of p53 and p27 genes revealed substitution of nucleotide G to C at location nucleotide 12139, exon 4 of gene p53. No alteration was detected at exon 5-6 and 8 of p53 gene and exon 1 and 2 of p27 gene.
Fulltext A Cross-Sectional Study of Neutrophil-to-Lymphocyte Ratio in Diagnosing Acute Appendicitis in Hospital Melaka

Ahmad KA, Ideris N, Aziz SHSA

Malays J Med Sci, 2019 Nov;26(6):55-66.
PMID: 31908587 DOI: 10.21315/mjms2019.26.6.6

Background: Acute appendicitis is one of the most common surgical emergencies. However, its proper diagnosis is complicated. This study aims to evaluate the ability of the neutrophil-to-lymphocyte ratio (NLR) to diagnose acute appendicitis in pre-operative state.
Methods: Histopathological examination of appendicectomies conducted between 2016 and 2017 in Melaka Hospital, Malaysia were traced and categorised into three groups: i) G1 (normal appendix), ii) G2 (acute appendicitis) and iii) G3 (perforated appendicitis). The reports were randomised and a total of 338 samples were collected. NLR values were compared between the three different groups and analysed.
Results: The median values of NLR for G1, G2 and G3 were 2.37, 5.25 and 9.27, respectively. We found a statistically significant difference in NLR between G1 and G2 (P < 0.001), and G2 and G3 (P < 0.001). The diagnostic values of NLR for acute appendicitis and perforated appendicitis were 3.11 (sensitivity: 75.23%, specificity: 68.70%) and 6.17 (sensitivity: 76.32%, specificity: 58.72%), respectively. There was a substantial correlation between NLR and disease severity, and a moderate correlation between NLR and duration of admission.
Conclusion: NLR, with a sensitivity of 75.23% and specificity of 68.70%, is a useful and reliable adjunct in diagnosing acute appendicitis. Hence, it will help in reducing the rate of negative appendicectomies.
Fulltext Turbulence Model Selection for Low Reynolds Number Flows

Aftab SM, Mohd Rafie AS, Razak NA, Ahmad KA

PLoS One, 2016;11(4):e0153755.
PMID: 27104354 DOI: 10.1371/journal.pone.0153755

One of the major flow phenomena associated with low Reynolds number flow is the formation of separation bubbles on an airfoil's surface. NACA4415 airfoil is commonly used in wind turbines and UAV applications. The stall characteristics are gradual compared to thin airfoils. The primary criterion set for this work is the capture of laminar separation bubble. Flow is simulated for a Reynolds number of 120,000. The numerical analysis carried out shows the advantages and disadvantages of a few turbulence models. The turbulence models tested were: one equation Spallart Allmars (S-A), two equation SST K-ω, three equation Intermittency (γ) SST, k-kl-ω and finally, the four equation transition γ-Reθ SST. However, the variation in flow physics differs between these turbulence models. Procedure to establish the accuracy of the simulation, in accord with previous experimental results, has been discussed in detail.
Fulltext Fluid Structure Interaction on Paravalvular Leakage of Transcatheter Aortic Valve Implantation Related to Aortic Stenosis: A Patient-Specific Case

Basri AA, Zuber M, Basri EI, Zakaria MS, Aziz AFA, Tamagawa M, et al.

Comput Math Methods Med, 2020;2020:9163085.
PMID: 32454886 DOI: 10.1155/2020/9163085

This study investigated the impact of paravalvular leakage (PVL) in relation to the different valve openings of the transcatheter aortic valve implantation (TAVI) valve using the fluid structure interaction (FSI) approach. Limited studies were found on the subject of FSI with regards to TAVI-PVL condition, which involves both fluid and structural responses in coupling interaction. Hence, further FSI simulation with the two-way coupling method is implemented to investigate the effects of hemodynamics blood flow along the patient-specific aorta model subjected to the interrelationship between PVL and the different valve openings using the established FSI software ANSYS 16.1. A 3D patient-specific aorta model is constructed using MIMICS software. The TAVI valve identical to Edward SAPIEN XT 26 (Edwards Lifesciences, Irvine, California), at different Geometrical Orifice Areas (GOAs), is implanted into the patient's aortic annulus. The leaflet opening of the TAVI valve is drawn according to severity of GOA opening represented in terms of 100%, 80%, 60%, and 40% opening, respectively. The result proved that the smallest percentage of GOA opening produced the highest possibility of PVL, increased the recirculatory flow proximally to the inner wall of the ascending aorta, and produced lower backflow velocity streamlines through the side area of PVL region. Overall, 40% GOA produced 89.17% increment of maximum velocity magnitude, 19.97% of pressure drop, 65.70% of maximum WSS magnitude, and a decrement of 33.62% total displacement magnitude with respect to the 100% GOA.
Fulltext Consideration of Lamination Structural Analysis in a Multi-Layered Composite and Failure Analysis on Wing Design Application

Basri EI, Sultan MTH, Basri AA, Mustapha F, Ahmad KA

Materials (Basel), 2021 Jul 02;14(13).
PMID: 34279278 DOI: 10.3390/ma14133705

A finite element (FE) model is developed to study the structural performance on a composite wing of a UAV with a tubercle design at the leading edge of the wing. The experimental study of the designation of the composite at the wing skin is carried out to prove the simulation validity through material characteristics. In this paper, the numerical modeling for simulation is highlighted to correlate the process parameter setting of simulation replicating the actual experimental tests. The percentage difference was calculated to be 11.1% by tensile and 10.47% by flexural. The numerical work applied the study of FE analysis and developed a standardized numerical approach for structural optimization, known as FE-ACP simulation. The significant findings of deformation are obtained according to Schrenk's aerodynamic loading, while the prediction of failure mode of Tsai-Wu under interaction among stresses and strains was acquired at the seventh and eighth layer of both spars.
Fulltext A Fluidics-Based Double Flexural Membrane Piezoelectric Micromachined Ultrasonic Transducer (PMUT) for Wide-Bandwidth Underwater Acoustic Applications

Ahmad KA, Rahman MFA, Zain KAM, Haron MN, Manaf AA

Sensors (Basel), 2021 Aug 19;21(16).
PMID: 34451023 DOI: 10.3390/s21165582

In acoustic receiver design, the receiving sensitivity and bandwidth are two primary parameters that determine the performance of a device. The trade-off between sensitivity and bandwidth makes the design very challenging, meaning it needs to be fine-tuned to suit specific applications. The ability to design a PMUT with high receiving sensitivity and a wide bandwidth is crucial to allow a wide spectrum of transmitted frequencies to be efficiently received. This paper presents a novel structure involving a double flexural membrane with a fluidic backing layer based on an in-plane polarization mode to optimize both the receiving sensitivity and frequency bandwidth for medium-range underwater acoustic applications. In this structure, the membrane material and electrode configuration are optimized to produce good receiving sensitivity. Simultaneously, a fluidic backing layer is introduced into the double flexural membrane to increase the bandwidth. Several piezoelectric membrane materials and various electrode dimensions were simulated using finite element analysis (FEA) techniques to study the receiving performance of the proposed structure. The final structure was then fabricated based on the findings from the simulation work. The pulse-echo experimental method was used to characterize and verify the performance of the proposed device. The proposed structure was found to have an improved bandwidth of 56.6% with a receiving sensitivity of -1.8864 dB rel 1 V µPa. For the proposed device, the resonance frequency and center frequency were 600 and 662.5 kHz, respectively, indicating its suitability for the targeted frequency range.
Review of numerical methods for simulation of mechanical heart valves and the potential for blood clotting

Zakaria MS, Ismail F, Tamagawa M, Aziz AFA, Wiriadidjaja S, Basri AA, et al.

Med Biol Eng Comput, 2017 Sep;55(9):1519-1548.
PMID: 28744828 DOI: 10.1007/s11517-017-1688-9

Even though the mechanical heart valve (MHV) has been used routinely in clinical practice for over 60 years, the occurrence of serious complications such as blood clotting remains to be elucidated. This paper reviews the progress that has been made over the years in terms of numerical simulation method and the contribution of abnormal flow toward blood clotting from MHVs in the aortic position. It is believed that this review would likely be of interest to some readers in various disciplines, such as engineers, scientists, mathematicians and surgeons, to understand the phenomenon of blood clotting in MHVs through computational fluid dynamics.
Fulltext Parametric Study and Experimental Investigations of a Single Crank-Slotted Dual Lever Mechanism for MAV Flapping Actuation

Singh S, Muralidharan AK, Radhakrishnan J, Zuber M, Basri AA, Mazlan N, et al.

Biomimetics (Basel), 2022 Nov 21;7(4).
PMID: 36412736 DOI: 10.3390/biomimetics7040208

Insect RoboFlyers are interesting and active focuses of study but producing high-quality flapping robots that replicate insect flight is challenging., due to the dual requirement of both a sophisticated transmission mechanism with light weight and minimal intervening connections. This innovative mechanism was created to address the need for a producible structure that is small in size, small in mass, and has reduced design linkages. The proposed Single Crank-Slotted Dual Lever (SC-SDL) mechanism transforms rotational motion into specific angular motion at different velocities for each of its two strokes, i.e., the forward stroke and the return stroke. The discovery of a lag between the left and right lever motions in our design mechanism-I leads us to the conclusion that the flapping is asymmetric. To eliminate the position lag, the design has been altered, and a new design mechanism-II has been developed. Comparative kinematic analysis of both design systems is performed using simulations. Two-dimensional analysis of the base ornithopter configuration using ANSYS FLUENT yielded deeper insights regarding the influence of varying flapping frequency on critical flow metrics regarding adequate lift and thrust. For a flapping frequency of 24 Hz, adequate lift generation was achieved with minimal flow disturbances and wake interactions. Averaged dual wing estimations were made as part of the CFD study, which showed similar agreements. To validate the estimations, experimental tests were performed over the design mechanism-II configuration.
Nasal airflow comparison in neonates, infant and adult nasal cavities using computational fluid dynamics

Corda JV, Shenoy BS, Ahmad KA, Lewis L, K P, Khader SMA, et al.

Comput Methods Programs Biomed, 2022 Feb;214:106538.
PMID: 34848078 DOI: 10.1016/j.cmpb.2021.106538

BACKGROUND AND OBJECTIVE: Neonates are preferential nasal breathers up to 3 months of age. The nasal anatomy in neonates and infants is at developing stages whereas the adult nasal cavities are fully grown which implies that the study of airflow dynamics in the neonates and infants are significant. In the present study, the nasal airways of the neonate, infant and adult are anatomically compared and their airflow patterns are investigated.
METHODS: Computational Fluid Dynamics (CFD) approach is used to simulate the airflow in a neonate, an infant and an adult in sedentary breathing conditions. The healthy CT scans are segmented using MIMICS 21.0 (Materialise, Ann arbor, MI). The patient-specific 3D airway models are analyzed for low Reynolds number flow using ANSYS FLUENT 2020 R2. The applicability of the Grid Convergence Index (GCI) for polyhedral mesh adopted in this work is also verified.
RESULTS: This study shows that the inferior meatus of neonates accounted for only 15% of the total airflow. This was in contrast to the infants and adults who experienced 49 and 31% of airflow at the inferior meatus region. Superior meatus experienced 25% of total flow which is more than normal for the neonate. The highest velocity of 1.8, 2.6 and 3.7 m/s was observed at the nasal valve region for neonates, infants and adults, respectively. The anterior portion of the nasal cavity experienced maximum wall shear stress with average values of 0.48, 0.25 and 0.58 Pa for the neonates, infants and adults.
CONCLUSIONS: The neonates have an underdeveloped nasal cavity which significantly affects their airway distribution. The absence of inferior meatus in the neonates has limited the flow through the inferior regions and resulted in uneven flow distribution.
Fulltext Simulation of Mechanical Heart Valve Dysfunction and the Non-Newtonian Blood Model Approach

Chen A, Basri AAB, Ismail NB, Tamagawa M, Zhu D, Ahmad KA

Appl Bionics Biomech, 2022;2022:9612296.
PMID: 35498142 DOI: 10.1155/2022/9612296

The mechanical heart valve (MHV) is commonly used for the treatment of cardiovascular diseases. Nonphysiological hemodynamic in the MHV may cause hemolysis, platelet activation, and an increased risk of thromboembolism. Thromboembolism may cause severe complications and valve dysfunction. This paper thoroughly reviewed the simulation of physical quantities (velocity distribution, vortex formation, and shear stress) in healthy and dysfunctional MHV and reviewed the non-Newtonian blood flow characteristics in MHV. In the MHV numerical study, the dysfunction will affect the simulation results, increase the pressure gradient and shear stress, and change the blood flow patterns, increasing the risks of hemolysis and platelet activation. The blood flow passes downstream and has obvious recirculation and stagnation region with the increased dysfunction severity. Due to the complex structure of the MHV, the non-Newtonian shear-thinning viscosity blood characteristics become apparent in MHV simulations. The comparative study between Newtonian and non-Newtonian always shows the difference. The shear-thinning blood viscosity model is the basics to build the blood, also the blood exhibiting viscoelastic properties. More details are needed to establish a complete and more realistic simulation.
Comparison of microparticle transport and deposition in nasal cavity of three different age groups

Valerian Corda J, Shenoy BS, Ahmad KA, Lewis L, K P, Rao A, et al.

Inhal Toxicol, 2024 Jan;36(1):44-56.
PMID: 38343121 DOI: 10.1080/08958378.2024.2312801

Objective: The nasal cavity effectively captures the particles present in inhaled air, thereby preventing harmful and toxic pollutants from reaching the lungs. This filtering ability of the nasal cavity can be effectively utilized for targeted nasal drug delivery applications. This study aims to understand the particle deposition patterns in three age groups: neonate, infant, and adult.Materials and methods: The CT scans are built using MIMICS 21.0, followed by CATIA V6 to generate a patient-specific airway model. Fluid flow is simulated using ANSYS FLUENT 2021 R2. Spherical monodisperse microparticles ranging from 2 to 60 µm and a density of 1100 kg/m3 are simulated at steady-state and sedentary inspiration conditions.Results: The highest nasal valve depositions for the neonate are 25% for 20 µm, for infants, 10% for 50 µm, 15% for adults, and 15% for 15 µm. At mid nasal region, deposition of 15% for 20 µm is observed for infant and 8% for neonate and adult nasal cavities at a particle size of 10 and 20 µm, respectively. The highest particle deposition at the olfactory region is about 2.7% for the adult nasal cavity for 20 µm, and it is <1% for neonate and infant nasal cavities.Discussion and conclusions: The study of preferred nasal depositions during natural sedentary breathing conditions is utilized to determine the size that allows medication particles to be targeted to specific nose regions.
Fulltext The Effect of Stacking Sequence on Fatigue Behaviour of Hybrid Pineapple Leaf Fibre/Carbon-Fibre-Reinforced Epoxy Composites

Hashim MKR, Majid MSA, Jamir MRM, Kasim FH, Sultan MTH, Shah AUM, et al.

Polymers (Basel), 2021 Nov 15;13(22).
PMID: 34833235 DOI: 10.3390/polym13223936

This study examined the fatigue behaviour of pineapple leaf fibre/carbon hybrid laminate composites under various stacking sequences. The vacuum infusion technique was used to fabricate the symmetric quasi-isotropic oriented laminates, in which the stacking was varied. The laminate was tested under static and fatigue tensile load according to ASTM D3039-76 and ASTM D3479-96, respectively. Maximum tensile strength and modulus of 119.34 MPa and 6.86 GPa, respectively, were recorded for the laminate with external PALF ply and internal carbon ply oriented at [± 45°2, 0°/90°2]s (PCCP_45090). The fatigue tests showed that PCCP_45090 and CPPC_09045 (with internal PALF ply and external carbon ply oriented at [0°/90°2, ± 45°2]s) exhibited a higher useful life, especially at the high-stress level of the ultimate tensile strength. The normalised stress against the number of cycles showed that the stacking sequences of different ply orientations affected the fatigue behaviour more than the stacking sequences of the material. The laminate stacking sequence significantly affected the hysteresis energy and stiffness evolution. The scanning electron microscopy images showed that the fatigue failure modes included fibre pull-out, fibre breakage, matrix cracking, debonding, and delamination. The study concluded that PCCP_45090 exhibited an outstanding fatigue performance.
Fulltext Impact of ZnO nanoparticles as additive on performance and emission characteristics of a diesel engine fueled with waste plastic oil

Suhel A, Abdul Rahim N, Abdul Rahman MR, Bin Ahmad KA, Khan U, Teoh YH, et al.

Heliyon, 2023 Apr;9(4):e14782.
PMID: 37064486 DOI: 10.1016/j.heliyon.2023.e14782

Neat waste plastic oil (WPO) application as a fuel in engines reduces BTE and increases deleterious emissions of CO, UHC, NOx, and smoke due to the presence of insufficient oxygen and unbreakable hydrocarbon chains in WPO. Present investigation was performed to evaluate the impact of ZnO nanoparticles on the performance and emission characteristics of a diesel engine operated with the waste plastic oil (WPO20) blend. The objective of doping ZnO nanoparticles with WPO20 was to enhance the oxidation reaction and heat transfer rate between fuel droplets during combustion, which aids in completing the combustion. The sol-gel technique was adopted to successfully synthesize the ZnO nanoparticles using zinc acetate (Zn(CH3CO2)2.2H2O) and sodium hydroxide (NaOH) precursors. The structure and morphology of resulted particles were studied by XRD and FESEM tests. Both results indicate the stable formation of ZnO, and exhibit the crystallinity nature, spherical surface, and size consistency. The synthesized ZnO nanoparticles were infused in WPO20 blend in the amounts of 50, 100, and 150 ppm with the aid of the ultrasonication technique. Engine test was conducted with diesel fuel, WPO20 blend, and nano-infused fuels at a constant speed of 1500 rpm under various loads. The disparities in performance and emission characteristics were examined and compared with pure diesel fuel. The findings demonstrated that adding nanoparticles to WPO20 significantly lowers the smoke, CO, UHC, and NOx emissions and simultaneously improves the BTE and decreases the BSFC of the diesel engine. Optimum results were obtained for 100 ppm concentration of ZnO nanoparticles. Reduction of smoke by 11.86%, CO by 5.7%, UHC by 28%, and NOx by 14.93%, along with the enhancement of BTE by 2.47%, were noticed at maximum load with 100 ppm particles. Based on the test results, it is concluded that ZnO nanoparticles can be used as a suitable additive in WPO blends to improve the overall engine characteristics. Further scope of the present work is to study the effect of organic nanoparticles with WPO on engine behaviour, the detailed combustion of nanoparticles infused WPO, and the nanoparticles doped WPO on engine wear and corrosion.
Molecular genetic analysis of BAX and cyclin D1 genes in patients with malignant glioma

Abdullah JM, Ahmad F, Ahmad KA, Ghazali MM, Jaafar H, Ideris A, et al.

Neurol Res, 2007 Apr;29(3):239-42.
PMID: 17509221

Brain tumorigenesis is a complex process involving multiple genetic alterations. Cyclin D1 and BAX genes are two of the most important regulators in controlling the normal proliferation and apoptosis of cells, respectively. In this study, we analysed the possibilities of involvement of cyclin D1 and BAX genes in the gliomagenesis.

Filters

Please provide feedback to Administrator ([email protected])

External Links