Industrial plastic waste is growing globally at an alarming rate and environmental pollution from traditional landfill disposal and incineration treatments are of great concern. As a strategy to reduce plastic pollution, value-added composite materials from industrial plastic wastes reinforced with recycled nylon fibers for use in floor paving tile applications were developed. This is to address the disadvantages of existing ceramic tiles which are relatively heavy, brittle, and expensive. The plastic waste composite structures were produced via compression molding technique at an optimized randomly oriented constant fiber volume fraction of 50 wt% after the initial sorting, cleaning, drying, pulverizing, and melt-mixing. The molding temperature, pressure, and time for the composite's structures were 220 ℃, 65 kg.cm-3, and 5 min respectively. The composites' thermal, mechanical, and microstructural properties were characterized in accordance with appropriate ASTM standards. From the results obtained, the differential scanning calorimetry (DSC) of mixed plastic wastes and nylon fiber wastes showed a processing temperature range of 130-180 ℃, and 250 ℃ respectively. Thermal degradation temperature (TGA) of the plastic and nylon fiber waste composites were stable above 400 ℃ with maximum bending strength, however, the reinforced plastic waste sandwiched composite structures had outstanding mechanical properties indicating unique characteristics suitable for floor paving tiles. Hence, the current research has developed tough and lightweight tiles composites that are economically viable, and their application will contribute to the development of the building and construction sectors thereby reducing about 10-15% of annual plastic waste generation and a sustainable environment.
A modified outdoor large-scale nutrient recycling system was developed to compost organic sludge and aimed to recover clean nitrogen for the cultivation of high-value-added microalgae. This study investigated the effect of calcium hydroxide addition on enhancing NH3 recovery in a pilot-scale reactor self-heated by metabolic heat of microorganisms during thermophilic composting of dewatered cow dung. 350 kg-ww of compost was prepared at the ratio of 5: 14: 1 (dewatered cowdung: rice husk: compost-seed) in a 4 m3 cylindrical rotary drum composting reactor for 14 days of aerated composting. High compost temperature up to 67 °C was observed from day 1 of composting, proving that thermophilic composting was achieved through the self-heating process. The temperature of compost increases as microbial activity increases and temperature decreases as organic matter decreases. The high CO2 evolution rate on day 0-2 (0.02-0.08 mol/min) indicated that microorganisms are most active in degrading organic matter. The increasing conversion of carbon demonstrated that organic carbon was degraded by microbial activity and emitted as CO2. The nitrogen mass balance revealed that adding calcium hydroxide to the compost and increasing the aeration rate on day 3 volatilized 9.83 % of the remaining ammonium ions in the compost, thereby improving the ammonia recovery. Moreover, Geobacillus was found to be the most dominant bacteria under elevated temperature that functions in the hydrolysis of non-dissolved nitrogen for better NH3 recovery. The presented results show that by thermophilic composting 1 ton-ds of dewatered cowdung for NH3 recovery, up to 11.54 kg-ds of microalgae can be produced.
Most households and healthcare facilities usually dispose of contaminated, unused, or expired (CUE) medicines with municipal wastes, the disposal of which usually amounts to $790/ton in the USA and £450/ton in the UK. Solid (e.g., tablets, capsules, powders) and semi-solid (e.g., ointment, creams) pharmaceuticals are managed with incineration/pyrolysis, encapsulation, and engineered landfills, whereas wastewater treatment plants (WWTPs) are recommended for liquid pharmaceutical wastes (PWs). However, to date, the sustainability and eco-friendliness profile of these techniques are only subjectively ensured, leading to controversial viewpoints in many guidelines. Each technique has relative strengths and weaknesses, and their comparative weighting to maximize these profiles is sought after. The present comprehensive review aims to fulfil knowledge gaps in this regard. Four electronic databases (e.g., PubMed/MEDLINE, Scopus, and ScienceDirect) were searched for PW management (PWM)-related qualitative and quantitative articles published till December 31, 2022. Articles without details of waste disposal techniques and their health and environmental impacts were excluded. Based on the literature review, we determine that incineration can be considered a sustainable option for solid and semi-solid PWs, and WWTPs can be eco-friendly for liquid PWs, whereas encapsulation and landfilling are less sustainable. It is high time that objectively proven sustainable and eco-friendly techniques be implemented for PWM based on their dosage forms or nature of hazards. Medicine take-back, eco-pharmacovigilance, extended producer responsibility, co-payment, and life cycle analysis of pharmaceuticals focusing on reduction, reuse/re-dispensing can be integrated to make existing models sustainable, circular, and eco-friendly.
Recycling automotive waste has increasingly become an alternative solution towards producing sustainable materials given the rising issue of raw material shortages and waste management challenges at global level. The improper end-of-life vehicle (ELV) waste management poses detrimental impacts on the environment. This paper proposes a novel method to develop thermal insulation sandwich panels using ELV waste, motivated by the critical needs of creating high-performance thermal insulation for buildings. Six sandwich panels (P1-P6) of different weight and ratio of shredded ELV particles were manufactured. The sandwich panels structure was made of three layers: a core, and a glass face sheet bonded to each side. The core structure composed of Polycarbonate (PC) from headlamp lenses and polyurethane (PU) from seat, bonded using resin casting approach. Thermal conductivity of the samples was measured using guarded hot-plate apparatus. Results corroborated that thermal conductivity of ELV-based sandwich panels reduced remarkably compared to panel without ELVs, recorded at 15.51% reduction. Composition gives the best thermal performance was made of mixed ELV core materials of ratio 50%PC:50%PU, it has a thermal conductivity value of 0.1776 W/mK. The transparency data were obtained using Haze-gard plus haze meter. The best luminous transmittance value was exhibited by P2 (100% PC), 67.47%. The best clarity value and haze value were shown by P6 (25% PC: 75% PU), 55.13% and 52.6% respectively. ELV waste can be recycled to develop useful sustainable thermal insulation to improve thermal and optical transparency performance of buildings as a substitute for conventional materials which have a relevance for future façade concepts.
Nutrient leaching and volatilization cause environmental pollution, thus the pursuit of developing controlled-release fertilizer formulation is necessary. Biochar-based fertilizer exhibits slow-release characteristic, however the nutrient release mechanism needs to be improved. To overcome this limitation, the approach of applying encapsulation technology with biochar-based fertilizer has been implemented in this study. Black peppercorn waste was used to synthesize urea-impregnated biochar (UIB). Central composite design was used to investigate the effects of pyrolysis temperature, residence time and urea:biochar ratio on nitrogen content of UIB. The optimum condition to synthesize UIB was at 400 °C pyrolysis temperature, 120 min residence time and 0.6:1 urea:biochar ratio, which resulted in 16.07% nitrogen content. The tapioca starch/palm oil (PO) biofilm formulated using 8 g of tapioca starch and 0.12 µL of PO was coated on the UIB to produce encapsulated urea-impregnated biochar (EUIB). The UIB and EUIB pellets achieved complete release of nitrogen in water after 90 min and 330 min, respectively. The nutrient release mechanism of UIB and EUIB was best described by the Higuchi model and Korsmeyer-Peppas model, respectively. The improvement of water retention ratio of UIB and EUIB pellets was more significant in sandy-textural soil as compared to clayey-textural soil. The EUIB derived from peppercorn waste has the potential to be utilized as a sustainable controlled-release fertilizer for agriculture.
Fast co-pyrolysis offers a sustainable solution for upcycling polymer waste, including scrap tyre and plastics. Previous studies primarily focused on slow heating rates, neglecting synergistic mechanisms and sulphur transformation in co-pyrolysis with tyre. This research explored fast co-pyrolysis of scrap tyre with polypropylene (PP), low-density polyethylene (LDPE), and polystyrene (PS) to understand synergistic effects and sulphur transformation mechanisms. A pronounced synergy was observed between scrap tyre and plastics, with the nature of the synergy being plastic-type dependent. Remarkably, blending 75 wt% PS or LDPE with tyre effectively eliminated sulphur-bearing compounds in the liquid product. This reduction in sulphur content can substantially mitigate the release of hazardous materials into the environment, emphasizing the environmental significance of co-pyrolysis. The synergy between PP or LDPE and tyre amplified the production of lighter hydrocarbons, while PS's interaction led to the creation of monocyclic aromatics. These findings offer insights into the intricate chemistry of scrap tyre and plastic interactions and highlight the potential of co-pyrolysis in waste management. By converting potential pollutants into valuable products, this method can significantly reduce the release of hazardous materials into the environment.
Due to the rapid growth of the aquaculture industry, large amounts of organic waste are released into nature and polluted the environment. Traditional organic waste treatment such as composting is a time-consuming process that retains the ammonia (NH3) in the compost, and the compost produced has little economic value as organic fertilizer. Illegal direct discharge into the environment is therefore widespread. This study investigates the recovery of NH3 through thermophilic composting of shrimp aquaculture sludge (SAS) and its application as a soil conditioner for the growth of mango plants. A maximum composting temperature of 57.10 °C was achieved through self-heating in a 200 L bench-scale reactor, resulting in NH3 recovery of 224.04 mol/ton-ds after 14 days. The addition of calcium hydroxide and increased aeration have been shown to increase NH3 volatilization. The recovered NH3 up to 3 kg-N can be used as a source of clean nitrogen for high-value microalgae cultivation, with a theoretical yield of up to 34.85 kg-algae of microalgae biomass from 1 ton-ds of SAS composting. Despite the high salinity, SAS compost improved mango plant growth and disease resistance. These results highlight the potential of SAS compost as a sustainable source of clean nitrogen for microalgae cultivation and soil conditioner, contributing to a waste-free circular economy through nutrient recycling and sustainable agriculture.
Waste electrical and electronic equipment (WEEE) has become a critical environmental problem. Catalytic pyrolysis is an ideal technique to treat and convert the plastic fraction of WEEE into chemicals and fuels. Unfortunately, research using real WEEE remains relatively limited. Furthermore, the complexity of WEEE complicates the analysis of its pyrolytic kinetics. This study applied the Fraser-Suzuki mathematical deconvolution method to obtain the pseudo reactions of the thermal degradation of two types of WEEE, using four different catalysts (Al2O3, HBeta, HZSM-5, and TiO2) or without a catalyst. The main contributor(s) to each pseudo reaction were identified by comparing them with the pyrolysis results of the pure plastics in WEEE. The nth order model was then applied to estimate the kinetic parameters of the obtained pseudo reactions. In the low-grade electronics pyrolysis, the pseudo-1 reaction using TiO2 as a catalyst achieved the lowest activation energy of 92.10 kJ/mol, while the pseudo-2 reaction using HZSM-5 resulted in the lowest activation energy of 101.35 kJ/mol among the four catalytic cases. For medium-grade electronics, pseudo-3 and pseudo-4 were the main reactions for thermal degradation, with HZSM-5 and TiO2 yielding the lowest pyrolytic activation energies of 75.24 and 226.39 kJ/mol, respectively. This effort will play a crucial role in comprehending the pyrolysis kinetic mechanism of WEEE and propelling this technology toward a brighter future.
This study examined the role of waste management authorities in promoting public awareness of municipal solid waste management (MSWM) through the lens of the expansion diffusion theory (EDT). EDT emphasizes the spread of new ideas and practices within a society through various communication channels and distinct individuals within each system. We employed a mixed-method approach using 116 survey responses from Lagos residents and five semi-structured in-depth interviews. Our findings reveal the need for a more structured approach to create public awareness of MSWM, considering the distinct groups of residents in Lagos and their responses to innovation and knowledge diffusion. We propose four pillars on which waste management authorities in developing countries can sustain their MSWM awareness campaigns, as well as an awareness campaign strategy flowchart. Our findings add to the expanding body of research on public awareness and participation in MSWM, emphasizing the critical role that waste management authorities can play in fostering sustainable waste management awareness and practices.
Optimized and automated methods for handling construction and demolition waste (CDW) are crucial for improving the resource recovery process in waste management. Automated waste recognition is a critical step in this process, and it relies on robust image segmentation techniques. Prompt-guided segmentation methods provide promising results for specific user needs in image recognition. However, the current state-of-the-art segmentation methods trained for generic images perform unsatisfactorily on CDW recognition tasks, indicating a domain gap. To address this gap, a user-guided segmentation pipeline is developed in this study that leverages prompts such as bounding boxes, points, and text to segment CDW in cluttered environments. The adopted approach achieves a class-wise performance of around 70 % in several waste categories, surpassing the state-of-the-art algorithms by 9 % on average. This method allows users to create accurate segmentations by drawing a bounding box, clicking, or providing a text prompt, minimizing the time spent on detailed annotations. Integrating this human-machine system as a user-friendly interface into material recovery facilities enhances the monitoring and processing of waste, leading to better resource recovery outcomes in waste management.
Glycerine pitch is a highly alkaline residue from the oleochemical industry that contains glycerol and contaminants, such as water, soap, salt and ash. In this study, acidic heterogeneous glycerol-based carbon catalysts were synthesised for biodiesel production via single-step partial carbonisation and sulfonation using pure glycerol and glycerine pitch, producing products labelled as SGC and SGPC, respectively. Carbon materials were obtained by heating glycerol and concentrated sulfuric acid (1:3) at 200℃ for 1 h. The produced SGC and SGPC displayed high densities of sulfonic group (-SO3H), i.e. 1.49 and 1.00 mmol·g-1, respectively, alongside carboxylic (-COOH) and phenolic (-OH) acid. In the catalytic evaluation, excellent oleic acid conversions of 96.0 ± 0.4 % and 92.4 ± 0.5 % were achieved using SGC and SGPC, respectively, under optimised reaction conditions: 1:10 M ratio of oleic acid to methanol, 5 % (w/w) catalyst, 64℃ and 5 h. SGPC was found to be recyclable with 68.5 % conversion after the 6th cycle, which was attributed to the loss of -SO3H and catalyst deactivation by the deposition of oleic acid on its surface. Remarkably, despite the impurities present in the glycerine pitch, the obtained results demonstrated that the reactivity of SGPC is comparable to SGC and superior to that of commercial solid acid catalysts, which demonstrated that the presence of impurities appears to have minimal impact on the production of carbon materials and their properties.
This research aims to evaluate the techno-economic viability and commercial potential of biomass gasification across different capacities. Sensitivity analysis was conducted based on an established downdraft gasifier model using Aspen Plus. Results underscored the significant impact of gasification temperature and equivalence ratio (ER) on syngas composition, low heating value (LHV), and cold gas efficiency (CGE). Among the feedstocks tested, coconut shell emerged as a feasible feedstock, yielding syngas with an LHV of 8.93 MJ/Nm3 and achieving a CGE of up to 71.12 %. Optimal gasification temperatures ranged between 750 °C to 1,000 °C, with peak ER falling within 0.1 to 0.3. Economic analysis revealed that smaller-scale operations like Plant A resulted in a negative net present value of - US$0.63 million, indicating unfavorable investments. The internal rate of return notably increased from 9.53 % for Plant B compared to -2.56 % for Plant A (20 kW). Plant D, with larger capacity of 20 MW, showed an impressive payback period of less than two years (1.69 years). Medium to large-scale plants such as Plant C (2 MW) and Plant D demonstrated greater economic resilience, with Plant D achieving a significantly lower levelized cost of electricity of US$ 0.19/kWh compared to Plant A at US$ 0.86/kWh. It was noted that the impact of capital costs, operating expenses, and revenue variations is less pronounced at larger scales. The findings from this study shed light on the feasibility of biomass gasification for power generation as a viable option, thereby unlocking the potential for its large-scale commercialization.