Displaying publications 801 - 820 of 1041 in total

Abstract:
Sort:
  1. Roslan AA, Rahman NA, Alam MK
    J Orthod Sci, 2018;7:16.
    PMID: 30271761 DOI: 10.4103/jos.JOS_37_18
    OBJECTIVE: This study was carried to study the prevalence of dental anomalies and treatment modalities/planning among the orthodontic patients.

    MATERIALS AND METHODS: A total of 370 orthodontic records including their pre-treatment orthopantomographs (OPG) and study models of orthodontic patients in permanent dentition who attended dental clinic were assessed for impaction, hypodontia, supernumerary, supraocclusion, infraocclusion, and any other anomalies excluding the third molars. The association of anomalies with gender status and racial status was analyzed using Pearson's Chi-square test. A P value of <0.05 is considered as significant. The confidence interval at 95% (CI) was set.

    RESULTS: Among the 370 subjects, 105 (28.4%) presented with at least one anomaly. Eighty-five (23%) demonstrated a single anomaly and 20 (5.4%) with more than one anomaly. The most prevalent anomaly was impaction (14.32%), followed by hypodontia (7.03%). The less common anomalies were microdontia (1.08%), dilacerations (0.27%), and generalised enamel hypoplasia (0.27%). Maxillary right lateral incisors and canines were the most common affected teeth and these are located on the maxillary right quadrant. It was evident that dental anomalies were statistically dependant on race (P = 0.025), but independent of gender. The most common treatment planned for these patients was fixed appliance.

    CONCLUSIONS: Impaction was predominant among 28.4% subjects observed with anomaly and most patients with anomaly are treated with fixed appliances (49%).

    CLINICAL RELEVANCE: These anomalies play a great role in occlusion and alignment in treatment planning and relapse for orthodontic treatment.

    Matched MeSH terms: Radiography, Panoramic
  2. Hamasha, Abed Al-Hadi, Almogbel, Lolowh, Alshehri, Abeer, Alssafia, Fatimah, Alghamdi, Hanan, Alajmia, Alanoud, et al.
    MyJurnal
    Upon reviewing the literature, the prevalence of many systemic conditions such as diabetes,
    hypertension, asthma and rheumatoid arthritis were reported to be high in Saudi Arabia. The relationship of these
    conditions with tooth loss among Saudi population was not investigated. Therefore, the aim of the present study
    is to explore the relationship between tooth loss and most common medical conditions among Saudi dental
    patient. The study participants were 250 patients who were randomly selected from the College of Dentistry
    database of King Saud bin Abdulaziz University for Health Sciences (KSAU-HS) in Riyadh, Saudi Arabia.
    Participants were requested to answer self-administered questionnaires related to their demographic as well as
    general health questions concerned to the presence of systemic medical conditions. Missing teeth were
    determined after examining the orthopantogram radiographs and reviewing the Romexis and SALUD databases.
    Descriptive statistics, independent t-test and linear multiple regression model were performed using SPSS
    software. The mean number of missing teeth among the study population was 5.8 teeth per person. The mean
    number of missing teeth was higher among subjects with diabetes, hypertension, rheumatoid arthritis,
    cardiovascular diseases, or osteoporosis compared to healthy individuals. A multiple linear regression analysis
    model revealed that diabetes, hypertension and rheumatoid were significant predictors of missing teeth among
    Saudi population. These results highlight the importance of the effect of medical conditions on oral health.
    Matched MeSH terms: Radiography, Panoramic
  3. Sand Chee S, Jawaid M
    Polymers (Basel), 2019 Dec 04;11(12).
    PMID: 31817284 DOI: 10.3390/polym11122012
    In this work, the optimum filler loading to prepare epoxy/organoclay nanocomposites by the in-situ polymerization method was studied. Bi-functionalized montmorillonite at different filler loading (0.5, 1.0, 2.0, 4.0 wt %) was dispersed in epoxy resin by using a high shear speed homogenizer. The effect on morphology, thermal, dynamic mechanical, and tensile properties of the epoxy/organoclay nanocomposites were studied in this work. Wide-angle X-ray scattering (WAXS) and field emission scanning electron microscope (FESEM) studies revealed that possible intercalated structures were obtained in epoxy/organoclay nanocomposites. Thermogravimetric analysis (TGA) shows that epoxy/organoclay nanocomposites exhibit higher thermal stability at the maximum and final decomposition temperature, as well as higher char content, compared to pristine epoxy. The dynamic mechanical analysis (DMA) indicate that storage modulus (E'), loss modulus (E″), cross-link density and glass transition temperature (Tg) of the nanocomposites were improved with organoclay loading up to 1 wt %. Beyond this loading limit, the deterioration of properties was observed. A similar trend was also observed on tensile strength and modulus. We concluded from this study that organoclay loading up to 1 wt % is suitable for further study to fabricate hybrid nanocomposites for various applications.
    Matched MeSH terms: Radiography
  4. Wahid W, Ahmad Fahmi NA, Mohd Salleh AF, Mohd Yasin '
    Respir Med Case Rep, 2019;28:100939.
    PMID: 31667075 DOI: 10.1016/j.rmcr.2019.100939
    Bronchopulmonary lophomoniasis is rare but immunocompromised individual is susceptible to this infection. We reported a case of bronchopulmonary lophomoniasis in a Malaysian female with systemic lupus erythromatosus. She presented with productive cough, shortness of breath and high-grade fever for 2 weeks. Physical examination revealed bronchial sound and crackles over the left lung with, reduced expansion and dull percussion in lower left lobe. Chest radiography showed consolidation of the left lung. Routine laboratory tests revealed general low cell count. Blood and sputum culture were negative. Bronchoalveolar lavage stain and culture for bacterial and fungal were negative. Bronchoalveolar lavage for Lophomonas blattarum was positive. Patient was treated with antiprotozoal drug, metronidazole. All her clinical problems resolved and she was discharged 14 days after admission.
    Matched MeSH terms: Radiography
  5. Mayaki AM, Intan-Shameha AR, Noraniza MA, Mazlina M, Adamu L, Abdullah R
    Vet World, 2019;12(3):377-381.
    PMID: 31089306 DOI: 10.14202/vetworld.2019.377-381
    Background and Aim: Back disorder is an ailment that often affects athletic and riding horses. Despite the rapidly growing equine athletic and equestrian activities, there is no documentation on the nature of equine back disorder (EBD) in Malaysian horses. The purpose of this study was to characterize EBD cases presented to University Veterinary Hospital, Universiti Putra Malaysia, between 2002 and 2017.

    Materials and Methods: The compilation of data was based on signalment, case history, duration of clinical signs, anatomical location of the pain, method of diagnosis, type of EBD, treatment, and outcome. The diagnosis of EBD was based on a history of poor performance, clinical examination findings, radiography, and, where applicable, necropsy.

    Results: A total of 181 diagnosed cases of EBDs were identified. The age of horses ranged from 5 to 22 years. The EBD cases were more prevalent in male than female horses and predominantly in geldings (60.77%). Thoroughbred, Arab, Polo pony, and Warmblood also recorded the most EBD cases among breeds. The discipline of horses tended to influence the development of EBDs, with patrolling horses recording the highest frequency. Most EBD cases were of the primary type (92.27%), with the main causes being soft-tissue lesions (57.48%), vertebral lesions (18.56%), tack-associated problems (16.77%), and neurological lesions (7.19%). The common treatments employed were administration of nonsteroidal anti-inflammatory agents, 1 to 3-month rest, warm and cold compression therapy, massage therapy, exercise adjustment, as well as correction of ill-saddle fit.

    Conclusion: Most EBDs in this study were associated with soft-tissue lesions. Among vertebral lesions, kissing spines were the most common cause of EBDs in horses in Malaysia.

    Matched MeSH terms: Radiography
  6. YAHYA S, OTHMAN N, DAUD A, JALAR A
    Sains Malaysiana, 2013;42:1793-1798.
    The effect of corrosion inhibition of low carbon steel in water based medium containing lignin was investigated via weight loss method. The evolution of surface morphology has been carried out for 7 to 42 days via optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron microscopy (XPS). Immersion of metal specimen without lignin shows that significant increase in the surface roughness. The longer the immersion time, the more the oxide crust formed. The surface degradation of metal specimen was well protected by immersion in lignin solution. A protective layer containing of lignin was formed on the surface of metal specimens after 7 and 21 days immersion. The corrosion inhibition gives about 13 and 53% inhibition for both 7 and 21 days immersion, respectively. The protective layers were spalling and separated from the metal surface after 42 days immersion in lignin solution possibly due to the increase in corrosion attack after long time immersion according to the increase in dissolved oxygen and may also due to the thermal mismatch between oxide and substrate. The adsorption of protective layer containing lignin was temporary adsorbed on the surface.
    Matched MeSH terms: Radiography
  7. Nordin Sabli, Zainal Abidin Talib, Chang CB, Wan Mahmood Mat Yunus, Zulkarnain Zainal, Hikmat S. Hilal, et al.
    Sains Malaysiana, 2014;43:1061-1067.
    Tin selenide (SnSe) and copper indium diselenide (CuInSe2) compounds were synthesized by high temperature reaction method using combination of sealed ampoule (at relatively low pressure ~10-1 Pa without inert gas) and heating at specific temperature profile in rocking furnace. Powder X-Ray diffraction analysis showed that the products involved only single phases of SnSe and of CuInSe2 only. Using the reaction products as source materials, the SnSe and CuInSe2 thin films were vacuum-deposited on glass substrates at room temperature. Structural, elemental, surface morphological and optical properties of the as-deposited films were studied by X-Ray diffraction (XRD), energy dispersive X-Ray (EDX) analysis, field emission scanning electron microscopy (FESEM) and UV-Vis-NIR spectroscopy. Single phase of SnSe and CuInSe2 films were obtained by thermal evaporation technique from synthesized SnSe and CuInSe2 compound without further treatment.
    Matched MeSH terms: Radiography
  8. Ying C, Kandaiya S
    Sains Malaysiana, 2012;41:133-140.
    Patient skin dose measurements were performed at the cardiology department in a hospital in Penang, Malaysia using EDR films during coronary angiography (CA) procedures. The EDR2 film was first characterized in terms of dose and energy dependence as well reproducibility. For patient dose measurements, the films were placed on the table underneath the patient for an under couch tube position. A total of 27 CA procedures were studied. Results for peak skin doses (PSD) ranged from 35 to 684 mGy while the dose area product (DAP) values were from 5.5 to 93.1 Gy cm2. DAP correlated reasonably with PSD for CA procedure (R2= 0.8212). The highest PSD value in this study is below the threshold dose value of 2 Gy for early transient skin injury recommended by the Food and Drug Administration (FDA 1994).
    Matched MeSH terms: Radiography, Interventional
  9. Nuruzatulifah Bt Asari @ Mansor, Tessonnier JP, Rinaldi A, Reiche S, Kutty M
    Sains Malaysiana, 2012;41:603-609.
    Surface functionalization of multi-walled carbon nanotubes (MWCNTs) was carried out using a gas phase treatment in a Universal Temperature Program (UTP) reactor by flowing SO3 gas onto the CNTs while being heated at different temperatures. The functionalized nanotubes were characterized using X-ray Fluorescence (XRF), Fourier Transform Infrared Spectroscopy (FT-IR) and Raman spectroscopy. The amount of oxyen and sulfur containing groups was determined by acid-base titration. The titration results were in good agreement with elemental analysis using x-ray fluorescence. FTIRanalysis showed the presence of oxygen and sulfur containing groups, S=O, C-S, C=O and -COOH. Raman spectroscopy confirmed that oxygen and sulfur containing acidic groups covalently attached to the sidewall of the MWCNTs.
    Matched MeSH terms: Radiography
  10. Anastasius EJ, Sawali H
    Iran J Otorhinolaryngol, 2019 Jan;31(102):61-63.
    PMID: 30783601
    Introduction: Double aortic arch (DAA) is a congenital anomaly of the aortic arch. It is the most common type of complete vascular ring. When it occurs, the connected segment of the aortic arch and its branches encircle the trachea and esophagus, leading to symptoms related to these two structures.

    Case Report: We present a case of a newborn baby who developed biphasic stridor immediately after a normal vaginal delivery. Endoscopic assessment of the trachea revealed a pulsatile narrowing at the level of the thoracic trachea, suggestive of an external compression. A contrast-enhanced computed tomography scan of the thorax with three-dimensional reconstruction confirmed the diagnosis of DAA with compression of the trachea and esophagus.

    Conclusion: Clinicians should strongly consider the possibility of a congenital vascular ring compression should an infant with a normal upper airway present with stridor. A precise diagnosis can be made by radiological examination.

    Matched MeSH terms: Radiography
  11. Halmi Shamsudin, Norman Nordin, Sa’don Samian, Hafiz Salahudin, Azrul, A.B., Nik Azuan, N.I., et al.
    Jurnal Inovasi Malaysia, 2018;2(1):31-50.
    MyJurnal
    Angiography procedures is one of the diagnostic imaging procedures for studying blood vessels in the arteries and veins. This angiography examination is performed by injecting a viscous liquid called contrast media into the blood vessels to clearly identify the blocked blood vessels. This procedure involves the exposure of X-Ray in certain blood vessels and is performed by the Interventionist Radiologist. There are several types of angiography examinations which include cerebral angiography, coronary angiography, pulmonary angiography, peripheral angiography and renal angiography. The main problem that occurs during the Lower Limb Angiography examination involving elderly patients aged 60 years and above who suffer from critical diabetes stage in both blood vessels. The problem arise when there is no special immobilize device to support the foot and the patients were in an uncomfortable state for a period of 2-3 hours during the examination. Hence specialists had difficulty to interpret accurately the blood vessel clot in the foot due to less optimum radiograph. IMMOLIMBTM is an innovative invention created from used waste to overcome the foot movements, providing comfort and enhancing optimum diagnostic images.
    Matched MeSH terms: Radiography
  12. Sghaireen MG, Alam MK, Patil SR, Rahman SA, Alhabib S, Lynch CD, et al.
    J Int Med Res, 2020 Mar;48(3):300060520912138.
    PMID: 32228352 DOI: 10.1177/0300060520912138
    Matched MeSH terms: Radiography, Panoramic
  13. Chan CYW, Naing KS, Chiu CK, Mohamad SM, Kwan MK
    J Orthop Surg (Hong Kong), 2019 6 25;27(2):2309499019857250.
    PMID: 31232161 DOI: 10.1177/2309499019857250
    PURPOSE: To analyze the incidence, pattern, and contributing factors of pelvic obliquity among Adolescent Idiopathic Scoliosis (AIS) patients who will undergo surgery.

    METHODS: In total, 311 patients underwent erect whole spine anteroposterior, lateral and lower limb axis films. Radiographic measurements included Transilium Pelvic Height Difference (TPHD; mm), Hip Abduction-Adduction angle (H/Abd-Add; °), Lower limb Length Discrepancy (LLD; mm), and Pelvic Hypoplasia (PH angle; °). The incidence and severity of pelvic obliquity were stratified to Lenke curve subtypes in 311 patients. The causes of pelvic obliquity were analyzed in 57 patients with TPHD ≥10 mm.

    RESULTS: The mean Cobb angle was 64.0 ± 17.2°. Sixty-nine patients had a TPHD of 0 mm (22.2%). The TPHD was <5 mm in 134 (43.0%) patients, 5-9 mm in 104 (33.4%) patients, 10-14 mm in 52 (16.7%) patients, 15-19 mm in 19 (6.1%) patients, and ≥20 mm in only 2 (0.6%) patients. There was a significant difference between the Lenke curve types in terms of TPHD (p = 0.002). L6 curve types had the highest TPHD of 9.0 ± 6.3 mm followed by L5 curves, which had a TPHD of 7.1 ± 4.8 mm. In all, 44.2% of L1 curves and 50.0% of L2 curves had positive TPHD compared to 66.7% of L5 curves and 74.1% of L6 curves which had negative TPHD. 33.3% and 24.6% of pelvic obliquity were attributed to PH and LLD, respectively, whereas 10.5% of cases were attributed to H/Abd-Add positioning.

    CONCLUSIONS: 76.4% of AIS cases had pelvic obliquity <10 mm; 44.2% of L1 curves and 50.0% of L2 curves had a lower right hemipelvis compared to 66.7% of L5 curves and 74.1% of L6 curves, which had a higher right hemipelvis. Among patients with pelvic obliquity ≥10 mm, 33.3% were attributed to PH, whereas 24.6% were attributed to LLD.

    Matched MeSH terms: Radiography
  14. Tamburrelli FC, Perna A, Proietti L, Zirio G, Santagada DA, Genitiempo M
    Malays Orthop J, 2019 Nov;13(3):39-44.
    PMID: 31890109 DOI: 10.5704/MOJ.1911.007
    Introduction: Posterior percutaneous instrumentation may represent a challenge when multiple levels need to be instrumentated, especially when including the upper thoracic spine. The aim of the present study was to evaluate the technical feasibility and the long-term outcome of such long constructs in different surgical conditions. Materials and Methods: This investigation was a retrospective cohort study which included patients who underwent thoraco-lumbar percutaneous fixations. We collected clinical, surgical and radiological data, with a minimum follow-up of 24 months. Health-related quality-of-life, residual pain, instrumentation placement, and complications were studied. Results: A total of 18 procedures were enrolled, in which 182 screws were implanted, (170 positioned in thoracic and 12 in lumbar pedicles, respectively). No surgical complications or hardware failure occurred in our series, 6 out of 182 (3,2%) screws had a partial pedicle breach, without neurological impairment or need for surgical revision. Conclusion: According to our results, a fully posterior percutaneous approach for long thoraco-lumbar spine instrumentation can be considered safe and reproducible, although an adequate training is strictly required.
    Matched MeSH terms: Radiography
  15. Shetty AP, Rajavelu R, Viswanathan VK, Watanabe K, Chhabra HS, Kanna RM, et al.
    Asian Spine J, 2020 Aug;14(4):475-488.
    PMID: 32493003 DOI: 10.31616/asj.2020.0014
    STUDY DESIGN: Multicenter validation study.

    PURPOSE: To evaluate the inter-rater reliability of Rajasekaran's kyphosis classification through a multicenter validation study.

    OVERVIEW OF LITERATURE: The classification of kyphosis, developed by Rajasekaran, incorporates factors related to curve characteristics, including column deficiency, disc mobility, curve magnitude, and osteotomy requirements. Although the classification offers significant benefits in determining prognosis and management decisions, it has not been subjected to multicenter validation.

    METHODS: A total of 30 sets of images, including plain radiographs, computed tomography scans, and magnetic resonance imaging scans, were randomly selected from our hospital patient database. All patients had undergone deformity correction surgery for kyphosis. Twelve spine surgeons from the Asia-Pacific region (six different countries) independently evaluated and classified the deformity types and proposed their surgical recommendations. This information was then compared with standard deformity classification and surgical recommendations.

    RESULTS: The kappa coefficients for the classification were as follows: 0.88 for type 1A, 0.78 for type 1B, 0.50 for type 2B, 0.40 for type 3A, 0.63 for type 3B, and 0.86 for type 3C deformities. The overall kappa coefficient for the classification was 0.68. Regarding the repeatability of osteotomy recommendations, kappa values were the highest for Ponte's (Schwab type 2) osteotomy (kappa 0.8). Kappa values for other osteotomy recommendations were 0.52 for pedicle subtraction/disc-bone osteotomy (Schwab type 3/4), 0.42 for vertebral column resection (VCR, type 5), and 0.30 for multilevel VCRs (type 6).

    CONCLUSIONS: Excellent accuracy was found for types 1A, 1B, and 3C deformities (ends of spectrum). There was more variation among surgeons in differentiating between one-column (types 2A and 2B) and two-column (types 3A and 3B) deficiencies, as surgeons often failed to recognize the radiological signs of posterior column failure. This failure to identify column deficiencies can potentially alter kyphosis management. There was excellent consensus among surgeons in the recommendation of type 2 osteotomy; however, some variation was observed in their choice for other osteotomies.

    Matched MeSH terms: Radiography
  16. Rasheed M, Jawaid M, Karim Z, Abdullah LC
    Molecules, 2020 Jun 18;25(12).
    PMID: 32570929 DOI: 10.3390/molecules25122824
    Bamboo fibers are utilized for the production of various structures, building materials, etc. and is of great significance all over the world especially in southeast Asia. In this study, the extraction of microcrystalline cellulose (MCC) was performed using bamboo fibers through acid hydrolysis and subsequently different characterizations were carried out using various advanced techniques. Fourier transform infrared (FTIR) spectroscopy analysis has indicated the removal of lignin from MCC extracted from bamboo pulp. Scanning Electron Microscopy (SEM) revealed rough surface and minor agglomeration of the MCC. Pure MCC, albeit with small quantities of impurities and residues, was obtained, as revealed by Energy Dispersive X-ray (EDX) analysis. X-ray diffraction (XRD) indicates the increase in crystallinity from 62.5% to 82.6%. Furthermore, the isolated MCC has slightly higher crystallinity compared to commercial available MCC (74%). The results of thermal gravimetric analysis (TGA) demonstrate better thermal stability of isolated MCC compared to its starting material (Bamboo fibers). Thus, the isolated MCC might be used as a reinforcing element for the production of green composites and it can also be utilized as a starting material for the production of crystalline nanocellulose in future.
    Matched MeSH terms: Radiography
  17. Elango S, Kareem BA, Chandrasekaran S, Azman N
    J Laryngol Otol, 1991 Sep;105(9):772-3.
    PMID: 1919352 DOI: 10.1017/s0022215100117281
    Nasopharyngeal carcinoma has been reported to have a higher incidence of distant metastases as compared to other head and neck cancers. Distant metastases of nasopharyngeal carcinoma has been reported in the bones, lungs, liver, distant lymph nodes, brain and porta hepatis. This report presents a case of nasopharyngeal carcinoma with secondaries in the extradural space at the thoracic level of the spinal cord which hitherto has been an unreported site.
    Matched MeSH terms: Radiography
  18. Hassan HJ, Hashim S, Abu Hanifah NZH, Ghoshal SK, Sanusi MSM, Binti Suhailin FH, et al.
    PMID: 34769689 DOI: 10.3390/ijerph182111170
    A particular category of jewelry is one involving bracelets and necklaces that are deliberately made to contain naturally occurring radioactive material (NORM)-purveyors making unsubstantiated claims for health benefits from the release of negative ions. Conversely, within the bounds of the linear no-threshold model, long-term use presents a radiological risk to wearers. Evaluation is conducted herein of the radiological risk arising from wearing these products and gamma-ray spectrometry is used to determine the radioactivity levels and annual effective dose of 15 commercially available bracelets (samples B1 to B15) and five necklaces (samples N16 to N20). Various use scenarios are considered; a Geant4 Monte Carlo (Geant4 MC) simulation is also performed to validate the experimental results. The dose conversion coefficient for external radiation and skin equivalent doses were also evaluated. Among the necklaces, sample N16 showed the greatest levels of radioactivity, at 246 ± 35, 1682 ± 118, and 221 ± 40 Bq, for 238U, 232Th, and 40K, respectively. For the bracelets, for 238U and 232Th, sample B15 displayed the greatest level of radioactivity, at 146 ± 21 and 980 ± 71 Bq, respectively. N16 offered the greatest percentage concentrations of U and Th, with means of 0.073 ± 0.0002% and 1.51 ± 0.0015%, respectively, giving rise to an estimated annual effective dose exposure of 1.22 mSv, substantially in excess of the ICRP recommended limit of 1 mSv/year.
    Matched MeSH terms: Radiography
  19. Solayar GN, Chinappa J, Harris IA, Chen DB, Macdessi SJ
    Malays Orthop J, 2017 Jul;11(2):45-52.
    PMID: 29021879 MyJurnal DOI: 10.5704/MOJ.1707.006
    Introduction: Optimal coronal and sagittal component positioning is important in achieving a successful outcome following total knee arthroplasty (TKA). Modalities to determine post-operative alignment include plain radiography and computer tomography (CT) imaging. This study aims to determine the accuracy and reliability of plain radiographs in measuring coronal and sagittal alignment following TKA. Materials and Methods: A prospective, consecutive study of 58 patients undergoing TKA was performed comparing alignment data from plain radiographs and CT imaging. Hip-knee-angle (HKA), sagittal femoral angle (SFA) and sagittal tibial angle (STA) measurements were taken by two observers from plain radiographs and compared with CT alignment. Intra- and inter-observer correlation was calculated for each measurement. Results: Intra-observer correlation was excellent for HKA (r>0.89) with a mean difference of <1.9°. The least intra-observer correlation was for SFA (mean r=0.58) with a mean difference of 8°. Inter-observer correlation was better for HKA (r>0.95) and STA (r>0.8) compared to SFA (r=0.5). When comparing modalities (radiographs vs CT), HKA estimations for both observers showed the least maximum and mean differences while SFA observations were the least accurate. Conclusion: Radiographic estimation of HKA showed excellent intra- and inter-observer correlation and corresponds well with CT imaging. However, radiographic estimation of sagittal plane alignment was less reliably measured and correlated less with CT imaging. Plain radiography was found to be inferior to CT for estimation of biplanar prosthetic alignment following TKA.
    Matched MeSH terms: Radiography
  20. Bunyarit SS, Jayaraman J, Naidu MK, Yuen Ying RP, Danaee M, Nambiar P
    Leg Med (Tokyo), 2017 09;28:45-53.
    PMID: 28772147 DOI: 10.1016/j.legalmed.2017.07.009
    Matched MeSH terms: Radiography, Panoramic
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links