The annual harvest of banana and plantain (Musa spp.) is approximately 145 million tons worldwide. About 85% of this global production comes from small plots and kitchen or backyard gardens from the developing world, and only 15% goes to the export trade. Musa acuminata and Musa balbisiana are the ancestors of several hundreds of parthenocarpic Musa diploid and polyploid cultivars, which show multiple origins through inter- and intra-specific hybridizations from these two wild diploid species. Generating hybrids combining host plant resistance to pathogens and pests, short growth cycles and height, high fruit yield, parthenocarpy, and desired quality from the cultivars remains a challenge for Musa crossbreeding, which started about one century ago in Trinidad. The success of Musa crossbreeding depends on the production of true hybrid seeds in a crop known for its high levels of female sterility, particularly among polyploid cultivars. All banana export cultivars grown today are, however, selections from somatic mutants of the group Cavendish and have a very narrow genetic base, while smallholders in sub-Saharan Africa, tropical Asia and Latin America use some bred-hybrids (mostly cooking types). Musa improvement goals need to shift to address emerging threats because of the changing climate. Innovative cell and molecular biology tools have the potential to enhance the pace and efficiency of genetic improvement in Musa. Micro-propagation has been successful for high throughput of clean planting materials while in vitro seed germination assists in obtaining seedlings after inter-specific and across ploidy hybridization. Flow cytometry protocols are used for checking ploidy among genebank accessions and breeding materials. DNA markers, the genetic maps based on them, and the recent sequencing of the banana genome offer means for gaining more insights in the genetics of the crops and to identifying genes that could lead to accelerating Musa betterment. Likewise, DNA fingerprinting has been useful to characterize Musa diversity. Genetic engineering provides a complementary tool to Musa breeders who can introduce today transgenes that may confer resistance to bacteria, fungi and nematodes, or enhance pro-vitamin A fruit content. In spite of recent advances, the genetic improvement of Musa depends on a few crossbreeding programs (based in Brazil, Cameroon, Côte d'Ivoire, Guadeloupe, Honduras, India, Nigeria, Tanzania and Uganda) or a handful of genetic engineering endeavors (Australia, Belgium, India, Kenya, Malaysia and Uganda). Development investors (namely international aid and philanthropy) should therefore increase their funding to genetically enhance this crop that ranks among the 10-top staple foods of the developing world.
The goal of responsible engineers is the creation of useful and safe technological products and commitment to public health, while respecting the autonomy of the clients and the public. Because engineers often face moral dilemma to resolve such issues, different engineers have chosen different course of actions depending on their respective moral value orientations. Islam provides a value-based mechanism rooted in the Maqasid al-Shari'ah (the objectives of Islamic law). This mechanism prioritizes some values over others and could help resolve the moral dilemmas faced in engineering. This paper introduces the Islamic interpretive-evaluative maxims to two core issues in engineering ethics: genetically modified foods and whistleblowing. The study aims primarily to provide problem-solving maxims within the Maqasid al-Shari'ah matrix through which such moral dilemmas in science and engineering could be studied and resolved.
This paper provides a systematic review of safety use of health information technology (IT). The first objective is to identify the antecedents towards safety use of health IT by conducting systematic literature review (SLR). The second objective is to classify the identified antecedents based on the work system in Systems Engineering Initiative for Patient Safety (SEIPS) model and an extension of DeLone and McLean (D&M) information system (IS) success model.
Tissue engineering (TE) research serves to overcome the major obstacles in organ transplantation. This paper summarizes the progress of TE in Malaysia. The online database of Elsevier’s SCOPUS was accessed. Publications related to TE from 1960 till 2017 were scrutinized. The results show an increasing trend in tissue engineering research and development in Malaysia. The search result identified and examined 264 original article publications. It is hoped that the outcomes of this study could serve as a point of reference for researchers on the status of TE research and development in Malaysia. The findings of this study could assist TE researchers in Malaysia to identify the strengths, weaknesses, opportunities and obstacles towards further enhancement in their activities. Consolidating, realigning and re-strategizing those initiatives should also be seen within the context of nurturing potential and budding researchers in TE.
Microalgae-based bioproducts are in limelight because of their promising future, novel characteristics, the current situation of population needs, and rising prices of rapidly depleting energy resources. Algae-based products are considered as clean sustainable energy and food resources. At present, they are not commercialized due to their high production cost and low yield. In recent years, novel genome editing tools like RNAi, ZNFs, TALENs, and CRISPR/Cas9 are used to enhance the quality and quantity of the desired products. Genetic and metabolic engineering are frequently applied because of their rapid and precise results than random mutagenesis. Omic approaches help enhance biorefinery capabilities and are now in the developing stage for algae. The future is very bright for transgenic algae with increased biomass yield, carbon dioxide uptake rate, accumulating high-value compounds, reduction in cultivation, and production costs, thus reaching the goal in the global algal market and capital flow. However, microalgae are primary producers and any harmful exposure to the wild strains can affect the entire ecosystem. Therefore, strict regulation and monitoring are required to assess the potential risks before introducing genetically modified microalgae into the natural ecosystem.
The uniaxial compressive strength (UCS) is one of the most common mechanical parameters required in geotechnical engineering to characterize the compressive strength of rock material. Measurements of UCS are expensive, time consuming, destructive and thus, not favorable in the presence of limited samples. Therefore, a simple yet practical application is needed for the estimation of UCS. This research presents two correlations to predict UCS values for granite and schist by using ultrasonic velocity travel time (tp) from ultrasonic tests. The validity of the practical approach presented in this research is confirmed based on the strong correlations developed from the experimental tests conducted. For the entire data set, the correlation between UCS and ultrasonic velocity travel time was expressed as UCS = 217.2 e-0.016(tp) for granite and UCS = 1110.6 e-0.037(tp) for schist and the coefficient of determination (R2) value for both granite and schist is 0.93. These correlations may be useful for applications related to geotechnical engineering designs.
Nowadays, demands in the application of fibre in concrete increase gradually as an engineering material. Rapid cost increment of material causes the increase in demand of new technology that provides safe, efficient and economical design for the present and future application. The introduction ofribbed slab reduces concrete materials and thusthe cost, but the strength of the structure also reduces due to the reducing of material. Steel fibre reinforced concrete (SFRC) has the ability to maintain a part of its tensile strength prior to crack in order to resist more loading compared to conventional concrete. Meanwhile, the ribbed slab can help in material reduction. This research investigated on the bending strength of 2-ribbed and 3-ribbed concrete slab with steel fibre reinforcement under static loading with a span of 1500 mm and 1000 mm x 75 mm in cross section. An amount of 40 kg/m steel fibre of all total concrete volume was used as reinforcement instead of conventional bars with concrete grade 30 N/mm2 . The slab wastested underthree-point bending. Load versus deflection curve was plotted to illustrate the result and to compare the deflection between control and ribbed slab. Thisresearch showsthat SFRCRibbed Slab capable to withstand the same amount of load as normal slab structure, although the concrete volume reduces up to 20%.
Education needs to change working life in order to improve and ensure the latest technology has been adopted to cater the new era of industrial revolution. To reach this, a technological-oriented education is required for students. In this section, Virtual Reality (VR) technology is useful to get empirical experience in tertiary education. Moreover, virtual world provides a hazard-free and explorative learning experience. This paper reviews the application of VR in engineering education. This work also covers the usage of VR application which begins with the history of VR application, reasons of VR in education, key elements for immersive VR collaboration, and types of VR systems. The input / output devices which involved in VR systems were also discussed. This paper also reviews VR systems classification and usage of VR in education systems. VR in design application was finally reviewed followed by the advantages and disadvantages of VR systems and VR hardware. The last section provides future trends and conclusion.
The cladded conductor is broadly utilized in engineering fields, such as aerospace, energy, and petrochemical; however, it is vulnerable to thickness loss occurring in the clad layer and nonconductive protection coating due to abrasive and corrosive environments. Such a flaw severely undermines the integrity and safety of the mechanical structures. Therefore, evaluating the thickness loss hidden inside cladded conductors via reliable nondestructive evaluation techniques is imperative. This paper intensively investigates the pulse-modulation eddy current technique (PMEC) for the assessment of thickness loss in a cladded conductor. An analytical model of the ferrite-cored probe is established for analyzing PMEC signals and characteristics of lift-off intersection (LOI) in testing signals. Experiments are conducted for evaluation of the thickness loss in cladded conductors. An inverse scheme based on LOI for estimation of the thickness-loss depth is proposed and further verified. Through simulations and experiments, it is found that the influences of the thickness loss in the clad layer and protective coating on the PMEC signals can be decoupled in virtue of the LOI characteristics. Based on LOI, the hidden thickness loss can be efficiently evaluated without much of a reduction in accuracy by using the PMEC probe for dedicated inspection of the cladded conductor.
In nature, streamflow pattern is characterized with high non-linearity and non-stationarity. Developing an accurate forecasting model for a streamflow is highly essential for several applications in the field of water resources engineering. One of the main contributors for the modeling reliability is the optimization of the input variables to achieve an accurate forecasting model. The main step of modeling is the selection of the proper input combinations. Hence, developing an algorithm that can determine the optimal input combinations is crucial. This study introduces the Genetic algorithm (GA) for better input combination selection. Radial basis function neural network (RBFNN) is used for monthly streamflow time series forecasting due to its simplicity and effectiveness of integration with the selection algorithm. In this paper, the RBFNN was integrated with the Genetic algorithm (GA) for streamflow forecasting. The RBFNN-GA was applied to forecast streamflow at the High Aswan Dam on the Nile River. The results showed that the proposed model provided high accuracy. The GA algorithm can successfully determine effective input parameters in streamflow time series forecasting.
In this paper, we introduce a new, three-dimensional chaotic system with one stable equilibrium. This system is a multistable dynamic system in which the strange attractor is hidden. We investigate its dynamic properties through equilibrium analysis, a bifurcation diagram and Lyapunov exponents. Such multistable systems are important in engineering. We perform an entropy analysis, parameter estimation and circuit design using this new system to show its feasibility and ability to be used in engineering applications.
The moisture content of a powder is a parameter crucial to be controlled in order to produce stable products with a long shelf life. Inferential control is the best solution to control the moisture content due to difficulty in measuring this variable online. In this study, fundamental and empirical approaches were used in designing the nonlinear model-based inferential control of moisture content of coconut milk powder that was produced from co-current spray dryer. A one-dimensional model with integration of reaction engineering approach (REA) model was used to represent the dynamic of the spray drying process. The empirical approach, i.e., nonlinear autoregressive with exogenous input (NARX) and neural network, was used to allow fast and accurate prediction of output response in inferential control. Minimal offset (<0.0003 kg/kg) of the responses at various set points indicate high accuracy of the neural network estimator. The nonlinear model-based inferential control was able to provide stable control response at wider process operating conditions and acceptable disturbance rejection. Nevertheless, the performance of the controller depends on the tuning rules used.
Inadequate self-repair and regenerative efficiency of the cartilage tissues has motivated the researchers to devise advanced and effective strategies to resolve this issue. Introduction of bioprinting to tissue engineering has paved the way for fabricating complex biomimetic engineered constructs. In this context, the current review gears off with the discussion of standard and advanced 3D/4D printing technologies and their implications for the repair of different cartilage tissues, namely, articular, meniscal, nasoseptal, auricular, costal, and tracheal cartilage. The review is then directed towards highlighting the current stem cell opportunities. On a concluding note, associated critical issues and prospects for future developments, particularly in this sphere of personalized medicines have been discussed.
In the modern age, digital games are widely used as informal media for Science, Technology, Engineering, and Mathematics (STEM) education and medical therapy for game-based learning. Digital games provide learners with a graphical system of interaction that enhances scientific concepts within an enjoyable environment. The vastly increasing number of digital games produced in the market affects the quality of STEM digital games while requiring multidisciplinary expertise. This paper proposes a framework for STEM digital game-based learning encompassing input-process-output stages. Several studies from the early 2000s onward were reviewed to discuss and present a new perspective on a framework for the design and development of digital games, particularly for STEM. This proposed framework consists of digital game development as input, experience as a process, and constructs as output. This simple and precise framework will generate a universal product for various types of learners. It can thus be used as a guideline for game designers, developers, and experts to develop STEM digital games and achieve better learning outcomes.
Digital technologies (DTs) are proven helpful in the Architecture, Engineering and Construction (AEC) industry due to their varied benefits to project stakeholders, such as enhanced visualization, better data sharing, reduction in building waste, increased productivity, sustainable performance and safety improvement. Therefore, researchers have conducted various studies on DTs in the AEC industry over the year; however, this study explores the state-of-the-art research on DTs in the AEC industry by means of a bibliometric-qualitative review method. This research would uncover new knowledge gaps and practical needs in the domain of DTs in the AEC industry. In addition, bibliometric analysis was carried out by utilizing academic publications from Scopus (i.e., 11,047 publications for the AEC industry, 1956 for DTs and 1778 for DTs in the AEC industry). Furthermore, a qualitative review was further conducted on 200 screened selected research publications in the domain of DTs. This study brings attention to the body of knowledge by envisioning trends and patterns by defining key research interests, journals, countries, new advancements, challenges, negative attitudes and future directions towards DTs in the AEC industry. However, this study is the first in its vital importance and uniqueness by providing a broad updated review of DTs in the AEC literature. Furthermore, this research laid a foundation for future researchers, policy makers and practitioners to explore the limitations in future research.
Work-related musculoskeletal disorders (WMSDs) are among the most common disorders in any work sector and industry. Ergonomic risk assessment can reduce the risk of WMSDs. Motion capture that can provide accurate and real-time quantitative data has been widely used as a tool for ergonomic risk assessment. However, most ergonomic risk assessments that use motion capture still depend on the traditional ergonomic risk assessment method, focusing on qualitative data. Therefore, this article aims to provide a view on the ergonomic risk assessment and apply current motion capture technology to understand classical mechanics of physics that include velocity, acceleration, force, and momentum in ergonomic risk assessment. This review suggests that using motion capture technologies with kinetic and kinematic variables, such as velocity, acceleration, and force, can help avoid inconsistency and develop more reliable results in ergonomic risk assessment. Most studies related to the physical measurement conducted with motion capture prefer to use non-optical motion capture because it is a low-cost system and simple experimental setup. However, the present review reveals that optical motion capture can provide more accurate data.
Due to unavailability of a computer keyboard layout for the Jawi script, users of this script make use of the Arabic keyboard layout for typing texts in this particular script. Obviously, the layout of the Arabic script keyboard is not designed for the ancient writing of the Jawi script. Keeping this in view, a research was conducted to design a new keyboard layout suitable for the users of the Jawi script from an ergonomics point of view, and the outcome of the research is presented in this study. In order to design the Jawi script keyboard layout, the relative finger strengths of both male and female subjects were determined experimentally. The relative frequency of the characters and two special characters (full-stop and comma) that appeared in the script were determined by counting their presence in a large number of texts in the script that represent the workload of the fingers. The keys were rearranged in such a way that the workload of each finger was approximately matched with its relative strength. The newly proposed arrangement of the keys was not much different compared to the Arabic script keyboard layout, and hence it is convenient for users to switch between the layouts.
In the literature, several methods of ground improvement have been presented including compacted stone columns. The bearing capacity of the granular column is governed mainly by the lateral confining pressure mobilized in the soft soil to restrain or prevent bulging of the granular column. Therefore, the technique becomes unfeasible in peat that does not provide sufficient lateral confinement. This condition can be overcome by encasing the stone column with geogrid. This paper investigates the performance of the geogrid encased vibrocompacted stone column in peat. This study was carried out using PLAXIS software equipped with unit cell concept. The peat was modelled using soft soil model and the stone column using Mohr-Coulomb soil model, respectively. The geogrid was modelled using the geogrid option and could take only tensile force. The results indicate that the geogrid encased stone column can take much higher load in comparison to ordinary stone columns as the stiffness of the column increases. Meanwhile, the length of encasement also varied and it was observed that it was very effective up to about two times the diameter of the column. It also increased the column stiffness, and therefore led to a significant strain reduction. It was also observed that the columns at a spacing of three times the diameter are very effective. The results presented here can be used by the geotechnical engineers to design the geogrid reinforced stone column based on the strength of the soil, diameter of the column, spacing of the columns and stiffness of the geogrid.
The low resolution Automatic Picture Transmission (APT) data from the National Oceanic and Atmospheric Administration (NOAA) polar-orbiting satellites Advanced Very High Resolution Radiometer (AVHRR) is being received and recorded in real-time mode at ground receiving station in School of Science and Technology, Universiti Malaysia Sabah. The system is suitable for the developing and undeveloped countries in south and Southeast Asia and is said to be acceptable for engineering, agricultural, climatological and environmental applications. The system comprises a personal computer attached with a small APT receiver. The data transmission between the ground receiving station and NOAA satellites is using the electromagnetic wave. The relation for receiving and processing the electromagnetic wave in the transmission will be discussed.
Welding process is most widely used in joining components or structures in industry. Although welding is part of a larger category called metals joining, the weld itself still gives significant problems to engineers, researchers and manufacturers until today. Several widely used welding processes, such as the Metal Inert Gas (MIG), Tungsten Inert Gas (TIG), and Manual Metal Arc (MMA), were studied. In the present paper, the characterization of the macrostructure, microstructure, hardness and residual stress distribution are highlighted and discussed to achieve a better understanding of the welded quality which is crucial in determining the welded products.