MyMedR

Displaying publications 61 - 80 of 302 in total

Abstract:

Sort:

Fulltext Amplification of different satellite-DNAs in prostate cancer

Ariffen NA, Ornellas AA, Alves G, Shana'ah AM, Sharma S, Kankel S, et al.

Pathol Res Pract, 2024 Apr;256:155269.
PMID: 38522124 DOI: 10.1016/j.prp.2024.155269

In various solid tumors and corresponding cell lines, prior research has identified acquired copy number variations (CNVs) encompassing centromeric satellite-DNA sequences. This observation emerged from the application of centromeric probes (satellite-DNA) as controls in molecular cytogenetic investigations and diagnostics, although these accounts were largely anecdotal. In this study, we conducted a systematic screening for satellite-DNA sequence amplification in 31 prostate cancer (PCa) samples, a prevalent malignancy in men characterized by discernible molecular cytogenetic aberrations. Notably, PCa-typical genetic aberrations, such as TMPRSS2-ERG gene rearrangements and PTEN deletion, were identified in 12 and 6 out of the 31 PCa samples, respectively. Overall, PCa exhibited genomic instability marked by chromosomal gain or loss of signals across nearly all tested satellite-DNA regions, with particular emphasis on the Y-chromosome (18/31 cases). Remarkably, 5/12 PCa samples representing more advanced metastatic cancer displayed amplification of one or two satellite DNA stretches each, being detectable as blocks analogous to homogenously staining regions. Notably, these stretches included α-satellite DNA derived from chromosomes 2, 3, 4, 15, and 20, as well as satellite-III DNAs (D1Z1 and DYZ1). These findings align with recent discoveries indicating that α-satellite DNAs are expressed as long-non-coding RNAs in advanced cancer, particularly in the context of PCa.
Fulltext Assessment of Natural Radioactivity Levels and Potential Radiological Risks of Common Building Materials Used in Bangladeshi Dwellings

Asaduzzaman K, Mannan F, Khandaker MU, Farook MS, Elkezza A, Amin YB, et al.

PLoS One, 2015;10(10):e0140667.
PMID: 26473957 DOI: 10.1371/journal.pone.0140667

The concentrations of primordial radionuclides (226Ra, 232Th and 40K) in commonly used building materials (brick, cement and sand), the raw materials of cement and the by-products of coal-fired power plants (fly ash) collected from various manufacturers and suppliers in Bangladesh were determined via gamma-ray spectrometry using an HPGe detector. The results showed that the mean concentrations of 226Ra, 232Th and 40K in all studied samples slightly exceeded the typical world average values of 50 Bq kg(-1), 50 Bq kg(-1) and 500 Bq kg(-1), respectively. The activity concentrations (especially 226Ra) of fly-ash-containing cement in this study were found to be higher than those of fly-ash-free cement. To evaluate the potential radiological risk to individuals associated with these building materials, various radiological hazard indicators were calculated. The radium equivalent activity values for all samples were found to be lower than the recommended limit for building materials of 370 Bq kg(-1), with the exception of the fly ash. For most samples, the values of the alpha index and the radiological hazard (external and internal) indices were found to be within the safe limit of 1. The mean indoor absorbed dose rate was observed to be higher than the population-weighted world average of 84 nGy h(-1), and the corresponding annual effective dose for most samples fell below the recommended upper dose limit of 1 mSv y(-1). For all investigated materials, the values of the gamma index were found to be greater than 0.5 but less than 1, indicating that the gamma dose contribution from the studied building materials exceeds the exemption dose criterion of 0.3 mSv y(-1) but complies with the upper dose principle of 1 mSv y(-1).
Postural orthostatic tachycardia syndrome after COVID-19 vaccination: A systematic review

Bushi G, Gaidhane S, Ballal S, Kumar S, Bhat M, Sharma S, et al.

BMC Cardiovasc Disord, 2024 Nov 13;24(1):643.
PMID: 39538129 DOI: 10.1186/s12872-024-04315-x

BACKGROUND: The global COVID-19 vaccination campaign, with 13.53 billion doses administered by early 2024, has significantly reduced severe illness and mortality. However, potential adverse effects, such as Postural Orthostatic Tachycardia Syndrome (POTS), have raised concerns. This systematic review evaluates the incidence, mechanisms, and clinical implications of POTS following COVID-19 vaccination.
METHODS: A systematic search of PubMed, EMBASE, and Web of Science was conducted up to June 7, 2024, following PRISMA guidelines to identify studies related to COVID-19 vaccines and POTS. Eligible studies included randomized controlled trials, cohort studies, cross-sectional studies, case-control studies, case series, and case reports. Screening, data extraction, and quality assessment were independently performed by two reviewers using the Joanna Briggs Institute Checklists and the Newcastle-Ottawa Scale.
RESULTS: Of the 1,531 articles identified, 10 met the inclusion criteria, encompassing a total of 284,678 participants. These studies included five case reports, two case series, one cross-sectional study, one prospective observational study, and one cohort study. The cohort study reported that the odds of new POTS diagnoses post-vaccination were 1.33 (95% CI: 1.25-1.41) compared to the 90 days prior. In contrast, the post-infection odds were 2.11 (95% CI: 1.70-2.63), and the risk of POTS was 5.35 times higher (95% CI: 5.05-5.68) post-infection compared to post-vaccination. Diagnostic findings across studies included elevated norepinephrine levels and reduced heart rate variability. Reported management strategies involved ivabradine, intravenous therapies, and lifestyle modifications.
CONCLUSION: The risk of POTS following COVID-19 vaccination is lower than that observed post-SARS-CoV-2 infection; however, existing studies are limited by small sample sizes and methodological variability. Further research is needed to clarify the incidence, mechanisms, and long-term outcomes of vaccine-related POTS to inform effective clinical management strategies.
Fulltext Strategies for advancing inclusive biodiversity research through equitable practices and collective responsibility

Valdez J, Damasceno G, Oh RRY, Quintero Uribe LC, Barajas Barbosa MP, Amado TF, et al.

Conserv Biol, 2024 Dec;38(6):e14325.
PMID: 39105487 DOI: 10.1111/cobi.14325

Biodiversity research is essential for addressing the global biodiversity crisis, necessitating diverse participation and perspectives of researchers from a wide range of backgrounds. However, conservation faces a significant inclusivity problem because local expertise from biodiversity-rich but economically disadvantaged regions is often underrepresented. This underrepresentation is driven by linguistic bias, undervalued contributions, parachute science practices, and capacity constraints. Although fragmented solutions exist, a unified multistakeholder approach is needed to address the interconnected and systemic conservation issues. We devised a holistic framework of collective responsibility across all research participants and tailored strategies that embrace diversity and dismantle systemic barriers to equitable collaboration. This framework delineates the diverse actors and practices required for promoting inclusivity in biodiversity research, assigning clear responsibilities to researchers, publishers, institutions, and funding bodies. Strategies for researchers include cultivating self-awareness, expanding literature searches, fostering partnerships with local experts, and promoting knowledge exchange. For institutions, we recommend establishing specialized liaison roles, implementing equitable policies, allocating resources for diversity initiatives, and enhancing support for international researchers. Publishers can facilitate multilingual dissemination, remove financial barriers, establish inclusivity standards, and ensure equitable representation in peer review. Funders must remove systemic barriers, strengthen research networks, and prioritize equitable resource allocation. Implementing these stakeholder-specific strategies can help dismantle deep-rooted biases and structural inequities in biodiversity research, catalyzing a shift toward a more inclusive and representative model that amplifies diverse perspectives and maximizes collective knowledge for effective global conservation.
Prognostic role of Oct4, CD44 and c-Myc in radio-chemo-resistant oral cancer patients and their tumourigenic potential in immunodeficient mice

Sawant S, Gokulan R, Dongre H, Vaidya M, Chaukar D, Prabhash K, et al.

Clin Oral Investig, 2016 Jan;20(1):43-56.
PMID: 25914047 DOI: 10.1007/s00784-015-1476-6

In the present study, we have investigated the prognostic value of known stem cell-associated molecules such as Oct4, CD44 and c-Myc in patients with oral SCC who had received post-surgery radio- and/or chemotherapy.
Marine debris in Malaysia: A review on the pollution intensity and mitigating measures

Fauziah SH, Rizman-Idid M, Cheah W, Loh KH, Sharma S, M R N, et al.

Mar Pollut Bull, 2021 Jun;167:112258.
PMID: 33839567 DOI: 10.1016/j.marpolbul.2021.112258

The launch of Roadmap towards Zero Single-use Plastics in 2018 demands baseline data on the management of marine debris in Malaysia. In 2021, Malaysia is placed 28th top plastic polluter in the world with plastic consumption at 56 kg/capita/year, therefore data on mismanaged plastic is imperative. This paper reviews the abundance and distribution of marine debris in selected Malaysian beaches over the last decade (2010-2020) and discusses issue on its management. Plastic debris on beaches in Malaysia, was reported to range from 64 items/m2, to as high as 1930 items/m2, contributing 30-45% of total waste collected. Plastics film was the most dominant, mainly originated from packaging materials. Therefore, appropriate action including improved marine waste management system is crucial to tackle the problem, together with effective governance mechanisms. Various suggestions were proposed based on the statistical-environmental data to reduce the occurrence of marine debris in the country.
Prolonged QT predicts prognosis in COVID-19

Akhtar Z, Gallagher MM, Yap YG, Leung LWM, Elbatran AI, Madden B, et al.

Pacing Clin Electrophysiol, 2021 05;44(5):875-882.
PMID: 33792080 DOI: 10.1111/pace.14232

BACKGROUND: Coronavirus disease-2019 (COVID-19) causes severe illness and multi-organ dysfunction. An abnormal electrocardiogram is associated with poor outcome, and QT prolongation during the illness has been linked to pharmacological effects. This study sought to investigate the effects of the COVID-19 illness on the corrected QT interval (QTc).
METHOD: For 293 consecutive patients admitted to our hospital via the emergency department for COVID-19 between 01/03/20 -18/05/20, demographic data, laboratory findings, admission electrocardiograph and clinical observations were compared in those who survived and those who died within 6 weeks. Hospital records were reviewed for prior electrocardiograms for comparison with those recorded on presentation with COVID-19.
RESULTS: Patients who died were older than survivors (82 vs 69.8 years, p 455 ms (males) and >465 ms (females) (p = 0.028, HR 1.49 [1.04-2.13]), as predictors of mortality. QTc prolongation beyond these dichotomy limits was associated with increased mortality risk (p = 0.0027, HR 1.78 [1.2-2.6]).
CONCLUSION: QTc prolongation occurs in COVID-19 illness and is associated with poor outcome.
Phytosterols as a natural anticancer agent: Current status and future perspective

Shahzad N, Khan W, Md S, Ali A, Saluja SS, Sharma S, et al.

Biomed Pharmacother, 2017 Apr;88:786-794.
PMID: 28157655 DOI: 10.1016/j.biopha.2017.01.068

Phytosterols are naturally occurring compounds in plants, structurally similar to cholesterol. The human diet is quite abundant in sitosterol and campesterol. Phytosterols are known to have various bioactive properties including reducing intestinal cholesterol absorption which alleviates blood LDL-cholesterol and cardiovascular problems. It is indicated that phytosterol rich diets may reduce cancer risk by 20%. Phytosterols may also affect host systems, enabling antitumor responses by improving immune response recognition of cancer, affecting the hormone dependent endocrine tumor growth, and by sterol biosynthesis modulation. Moreover, phytosterols have also exhibited properties that directly inhibit tumor growth, including reduced cell cycle progression, apoptosis induction, and tumor metastasis inhibition. The objective of this review is to summarize the current knowledge on occurrences, chemistry, pharmacokinetics and potential anticancer properties of phytosterols in vitro and in vivo. In conclusion, anticancer effects of phytosterols have strongly been suggested and support their dietary inclusion to prevent and treat cancers.
Fulltext Comparative Analysis of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Using Taguchi Design

Khare JM, Dahiya S, Gangil B, Ranakoti L, Sharma S, Huzaifah MRM, et al.

Polymers (Basel), 2021 Oct 19;13(20).
PMID: 34685366 DOI: 10.3390/polym13203607

In polymer composites, synthetic fibers are primarily used as a chief reinforcing material, with a wide range of applications, and are therefore essential to study. In the present work, we carried out the erosive wear of natural and synthetic fiber-based polymer composites. Glass fiber with jute and Grewia optiva fiber was reinforced in three different polymer resins: epoxy, vinyl ester and polyester. The hand lay-up method was used for the fabrication of composites. L16 orthogonal array of Taguchi method used to identify the most significant parameters (impact velocity, fiber content, and impingement angle) in the analysis of erosive wear. ANOVA analysis revealed that the most influential parameter was in the erosive wear analysis was impact velocity followed by fiber content and impingement angle. It was also observed that polyester-based composites exhibited the highest erosive wear followed by vinyl ester-based composites, and epoxy-based composites showed the lowest erosive wear. From the present study, it may be attributed that the low hardness of the polyester resulting in low resistance against the impact of erodent particles. The SEM analysis furthermore illustrates the mechanism took place during the wear examination of all three types of composites at highest fiber loading. A thorough assessment uncovers brittle fractures in certain regions, implying that a marginal amount of impact forces was also acting on the fabricated samples. The developed fiber-reinforced polymer sandwich composite materials possess excellent biocompatibility, desirable promising properties for prosthetic, orthopaedic, and bone-fracture implant uses.
Fulltext Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications and Cost

Suriani MJ, Ilyas RA, Zuhri MYM, Khalina A, Sultan MTH, Sapuan SM, et al.

Polymers (Basel), 2021 Oct 13;13(20).
PMID: 34685272 DOI: 10.3390/polym13203514

Increasing scientific interest has occurred concerning the utilization of natural fiber-enhanced hybrid composites that incorporate one or more types of natural enhancement. Annual natural fiber production is estimated to be 1,783,965 × 103 tons/year. Extensive studies have been conducted in the domains of natural/synthetic as well as natural/natural hybrid composites. As synthetic fibers have better rigidity and strength than natural fibers, natural/synthetic hybrid composites have superior qualities via hybridization compared to natural composites in fibers. In general, natural fiber compounds have lower characteristics, limiting the use of natural composites reinforced by fiber. Significant effort was spent in enhancing the mechanical characteristics of this group of materials to increase their strengths and applications, especially via the hybridization process, by manipulating the characteristics of fiber-reinforced composite materials. Current studies concentrate on enhancing the understanding of natural fiber-matrix adhesion, enhancing processing methods, and natural fiber compatibility. The optimal and resilient conceptions have also been addressed due to the inherently more significant variabilities. Moreover, much research has tackled natural fiber reinforced hybrid composite costs. In addition, this review article aims to offer a review of the variables that lead to the mechanical and structural failure of natural fiber reinforced polymer composites, as well as an overview of the details and costings of the composites.
Fulltext Improvements in the Engineering Properties of Cementitious Composites Using Nano-Sized Cement and Nano-Sized Additives

Rahman I, Singh P, Dev N, Arif M, Yusufi FNK, Azam A, et al.

Materials (Basel), 2022 Nov 15;15(22).
PMID: 36431551 DOI: 10.3390/ma15228066

The findings of an extensive experimental research study on the usage of nano-sized cement powder and other additives combined to form cement-fine-aggregate matrices are discussed in this work. In the laboratory, dry and wet methods were used to create nano-sized cements. The influence of these nano-sized cements, nano-silica fumes, and nano-fly ash in different proportions was studied to the evaluate the engineering properties of the cement-fine-aggregate matrices concerning normal-sized, commercially available cement. The composites produced with modified cement-fine-aggregate matrices were subjected to microscopic-scale analyses using a petrographic microscope, a Scanning Electron Microscope (SEM), and a Transmission Electron Microscope (TEM). These studies unravelled the placement and behaviour of additives in controlling the engineering properties of the mix. The test results indicated that nano-cement and nano-sized particles improved the engineering properties of the hardened cement matrix. The wet-ground nano-cement showed the best result, 40 MPa 28th-day compressive strength, without mixing any additive compared with ordinary and dry-ground cements. The mix containing 50:50 normal and wet-ground cement exhibited 37.20 MPa 28th-day compressive strength. All other mixes with nano-sized dry cement, silica fume, and fly ash with different permutations and combinations gave better results than the normal-cement-fine-aggregate mix. The petrographic studies and the Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) analyses further validated the above findings. Statistical analyses and techniques such as correlation and stepwise multiple regression analysis were conducted to compose a predictive equation to calculate the 28th-day compressive strength. In addition to these methods, a repeated measures Analysis of Variance (ANOVA) was also implemented to analyse the statistically significant differences among three differently timed strength readings.
Fulltext Circulating purification of cutting fluid: an overview

Wu X, Li C, Zhou Z, Nie X, Chen Y, Zhang Y, et al.

Int J Adv Manuf Technol, 2021;117(9-10):2565-2600.
PMID: 34465936 DOI: 10.1007/s00170-021-07854-1

Cutting fluid has cooling and lubricating properties and is an important part of the field of metal machining. Owing to harmful additives, base oils with poor biodegradability, defects in processing methods, and unreasonable emissions of waste cutting fluids, cutting fluids have serious pollution problems, which pose challenges to global carbon emissions laws and regulations. However, the current research on cutting fluid and its circulating purification technique lacks systematic review papers to provide scientific technical guidance for actual production. In this study, the key scientific issues in the research achievements of eco-friendly cutting fluid and waste fluid treatment are clarified. First, the preparation and mechanism of organic additives are summarized, and the influence of the physical and chemical properties of vegetable base oils on lubricating properties is analyzed. Then, the process characteristics of cutting fluid reduction supply methods are systematically evaluated. Second, the treatment of oil mist and miscellaneous oil, the removal mechanism and approach of microorganisms, and the design principles of integrated recycling equipment are outlined. The conclusion is concluded that the synergistic effect of organic additives, biodegradable vegetable base oils and recycling purification effectively reduces the environmental pollution of cutting fluids. Finally, in view of the limitations of the cutting fluid and its circulating purification technique, the prospects of amino acid additive development, self-adapting jet parameter supply system, matching mechanism between processing conditions and cutting fluid are put forward, which provides the basis and support for the engineering application and development of cutting fluid and its circulating purification.
Fulltext Nano based drug delivery systems: recent developments and future prospects

Patra JK, Das G, Fraceto LF, Campos EVR, Rodriguez-Torres MDP, Acosta-Torres LS, et al.

J Nanobiotechnology, 2018 Sep 19;16(1):71.
PMID: 30231877 DOI: 10.1186/s12951-018-0392-8

Nanomedicine and nano delivery systems are a relatively new but rapidly developing science where materials in the nanoscale range are employed to serve as means of diagnostic tools or to deliver therapeutic agents to specific targeted sites in a controlled manner. Nanotechnology offers multiple benefits in treating chronic human diseases by site-specific, and target-oriented delivery of precise medicines. Recently, there are a number of outstanding applications of the nanomedicine (chemotherapeutic agents, biological agents, immunotherapeutic agents etc.) in the treatment of various diseases. The current review, presents an updated summary of recent advances in the field of nanomedicines and nano based drug delivery systems through comprehensive scrutiny of the discovery and application of nanomaterials in improving both the efficacy of novel and old drugs (e.g., natural products) and selective diagnosis through disease marker molecules. The opportunities and challenges of nanomedicines in drug delivery from synthetic/natural sources to their clinical applications are also discussed. In addition, we have included information regarding the trends and perspectives in nanomedicine area.
Epstein-Barr virus-driven lymphoproliferation in inborn errors of immunity: a diagnostic and therapeutic challenge

Barman P, Basu S, Goyal T, Sharma S, Siniah S, Tyagi R, et al.

Expert Rev Clin Immunol, 2024 Jul 30.
PMID: 39066572 DOI: 10.1080/1744666X.2024.2386427

INTRODUCTION: Inborn errors of immunity (IEI) are a group of genetically heterogeneous disorders with a wide-ranging clinical phenotype, varying from increased predisposition to infections to dysregulation of the immune system, including autoimmune phenomena, autoinflammatory disorders, lymphoproliferation, and malignancy. Lymphoproliferative disorder (LPD) in IEI refers to the nodal or extra-nodal and persistent or recurrent clonal or non-clonal proliferation of lymphoid cells in the clinical context of an inherited immunodeficiency or immune dysregulation. The Epstein-Barr virus (EBV) plays a significant role in the etiopathogenesis of LPD in IEIs. In patients with specific IEIs, lack of immune surveillance can lead to an uninhibited proliferation of EBV-infected cells that may result in chronic active EBV infection, hemophagocytic lymphohistiocytosis, and LPD, particularly lymphomas.
AREAS COVERED: We intend to discuss the pathogenesis, diagnosis, and treatment modalities directed toward EBV-associated LPD in patients with distinct IEIs.
EXPERT OPINION: EBV-driven lymphoproliferation in IEIs presents a diagnostic and therapeutic problem that necessitates a comprehensive understanding of host-pathogen interactions, immune dysregulation, and personalized treatment approaches. A multidisciplinary approach involving immunologists, hematologists, infectious disease specialists, and geneticists is paramount to addressing the diagnostic and therapeutic challenges posed by this intriguing yet formidable clinical entity.
Dendrimers as nanoscale vectors: Unlocking the bars of cancer therapy

Dey AD, Bigham A, Esmaeili Y, Ashrafizadeh M, Moghaddam FD, Tan SC, et al.

Semin Cancer Biol, 2022 11;86(Pt 2):396-419.
PMID: 35700939 DOI: 10.1016/j.semcancer.2022.06.003

Chemotherapy is the first choice in the treatment of cancer and is always preferred to other approaches such as radiation and surgery, but it has never met the need of patients for a safe and effective drug. Therefore, new advances in cancer treatment are now needed to reduce the side effects and burdens associated with chemotherapy for cancer patients. Targeted treatment using nanotechnology are now being actively explored as they could effectively deliver therapeutic agents to tumor cells without affecting normal cells. Dendrimers are promising nanocarriers with distinct physiochemical properties that have received considerable attention in cancer therapy studies, which is partly due to the numerous functional groups on their surface. In this review, we discuss the progress of different types of dendrimers as delivery systems in cancer therapy, focusing on the challenges, opportunities, and functionalities of the polymeric molecules. The paper also reviews the various role of dendrimers in their entry into cells via endocytosis, as well as the molecular and inflammatory pathways in cancer. In addition, various dendrimers-based drug delivery (e.g., pH-responsive, enzyme-responsive, redox-responsive, thermo-responsive, etc.) and lipid-, amino acid-, polymer- and nanoparticle-based modifications for gene delivery, as well as co-delivery of drugs and genes in cancer therapy with dendrimers, are presented. Finally, biosafety concerns and issues hindering the transition of dendrimers from research to the clinic are discussed to shed light on their clinical applications.
Nutraceuticals and COVID-19: A mechanistic approach toward attenuating the disease complications

Paudel KR, Patel V, Vishwas S, Gupta S, Sharma S, Chan Y, et al.

J Food Biochem, 2022 Dec;46(12):e14445.
PMID: 36239436 DOI: 10.1111/jfbc.14445

Nutraceuticals have emerged as potential compounds to attenuate the COVID-19 complications. Precisely, these food additives strengthen the overall COVID treatment and enhance the immunity of a person. Such compounds have been used at a large scale, in almost every household due to their better affordability and easy access. Therefore, current research is focused on developing newer advanced formulations from potential drug candidates including nutraceuticals with desirable properties viz, affordability, ease of availability, ease of administration, stability under room temperature, and potentially longer shelf-lives. As such, various nutraceutical-based products such as compounds could be promising agents for effectively managing COVID-19 symptoms and complications. Most importantly, regular consumption of such nutraceuticals has been shown to boost the immune system and prevent viral infections. Nutraceuticals such as vitamins, amino acids, flavonoids like curcumin, and probiotics have been studied for their role in the prevention of COVID-19 symptoms such as fever, pain, malaise, and dry cough. In this review, we have critically reviewed the potential of various nutraceutical-based therapeutics for the management of COVID-19. We searched the information relevant to our topic from search engines such as PubMed and Scopus using COVID-19, nutraceuticals, probiotics, and vitamins as a keyword. Any scientific literature published in a language other than English was excluded. PRACTICAL APPLICATIONS: Nutraceuticals possess both nutritional values and medicinal properties. They can aid in the prevention and treatment of diseases, as well as promote physical health and the immune system, normalizing body functions, and improving longevity. Recently, nutraceuticals such as probiotics, vitamins, polyunsaturated fatty acids, trace minerals, and medicinal plants have attracted considerable attention and are widely regarded as potential alternatives to current therapeutic options for the effective management of various diseases, including COVID-19.
Context and priorities for health systems strengthening for pain and disability in low- and middle-income countries: a secondary qualitative study and content analysis of health policies

Briggs AM, Jordan JE, Sharma S, Young JJ, Chua J, Foster HE, et al.

Health Policy Plan, 2023 Feb 13;38(2):129-149.
PMID: 35876078 DOI: 10.1093/heapol/czac061

Musculoskeletal (MSK) health impairments contribute substantially to the pain and disability burden in low- and middle-income countries (LMICs), yet health systems strengthening (HSS) responses are nascent in these settings. We aimed to explore the contemporary context, framed as challenges and opportunities, for improving population-level prevention and management of MSK health in LMICs using secondary qualitative data from a previous study exploring HSS priorities for MSK health globally and (2) to contextualize these findings through a primary analysis of health policies for integrated management of non-communicable diseases (NCDs) in select LMICs. Part 1: 12 transcripts of interviews with LMIC-based key informants (KIs) were inductively analysed. Part 2: systematic content analysis of health policies for integrated care of NCDs where KIs were resident (Argentina, Bangladesh, Brazil, Ethiopia, India, Kenya, Malaysia, Philippines and South Africa). A thematic framework of LMIC-relevant challenges and opportunities was empirically derived and organized around five meta-themes: (1) MSK health is a low priority; (2) social determinants adversely affect MSK health; (3) healthcare system issues de-prioritize MSK health; (4) economic constraints restrict system capacity to direct and mobilize resources to MSK health; and (5) build research capacity. Twelve policy documents were included, describing explicit foci on cardiovascular disease (100%), diabetes (100%), respiratory conditions (100%) and cancer (89%); none explicitly focused on MSK health. Policy strategies were coded into three categories: (1) general principles for people-centred NCD care, (2) service delivery and (3) system strengthening. Four policies described strategies to address MSK health in some way, mostly related to injury care. Priorities and opportunities for HSS for MSK health identified by KIs aligned with broader strategies targeting NCDs identified in the policies. MSK health is not currently prioritized in NCD health policies among selected LMICs. However, opportunities to address the MSK-attributed disability burden exist through integrating MSK-specific HSS initiatives with initiatives targeting NCDs generally and injury and trauma care.
Fulltext Use of Industrial Wastes as Sustainable Nutrient Sources for Bacterial Cellulose (BC) Production: Mechanism, Advances, and Future Perspectives

Kadier A, Ilyas RA, Huzaifah MRM, Harihastuti N, Sapuan SM, Harussani MM, et al.

Polymers (Basel), 2021 Sep 30;13(19).
PMID: 34641185 DOI: 10.3390/polym13193365

A novel nanomaterial, bacterial cellulose (BC), has become noteworthy recently due to its better physicochemical properties and biodegradability, which are desirable for various applications. Since cost is a significant limitation in the production of cellulose, current efforts are focused on the use of industrial waste as a cost-effective substrate for the synthesis of BC or microbial cellulose. The utilization of industrial wastes and byproduct streams as fermentation media could improve the cost-competitiveness of BC production. This paper examines the feasibility of using typical wastes generated by industry sectors as sources of nutrients (carbon and nitrogen) for the commercial-scale production of BC. Numerous preliminary findings in the literature data have revealed the potential to yield a high concentration of BC from various industrial wastes. These findings indicated the need to optimize culture conditions, aiming for improved large-scale production of BC from waste streams.
Evidence-Based Traditional Medicine for Transforming Global Health and Well-Being

Patwardhan B, Wieland LS, Aginam O, Chuthaputti A, Ghelman R, Ghods R, et al.

J Integr Complement Med, 2023 Sep;29(9):527-530.
PMID: 37713586 DOI: 10.1089/jicm.2023.29121.editorial
Fulltext Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants

Ilyas RA, Sapuan SM, Asyraf MRM, Dayana DAZN, Amelia JJN, Rani MSA, et al.

Polymers (Basel), 2021 May 23;13(11).
PMID: 34070960 DOI: 10.3390/polym13111701

Polymer composites filled with metal derivatives have been widely used in recent years, particularly as flame retardants, due to their superior characteristics, including high thermal behavior, low environmental degradation, and good fire resistance. The hybridization of metal and polymer composites produces various favorable properties, making them ideal materials for various advanced applications. The fire resistance performance of polymer composites can be enhanced by increasing the combustion capability of composite materials through the inclusion of metallic fireproof materials to protect the composites. The final properties of the metal-filled thermoplastic composites depend on several factors, including pore shape and distribution and morphology of metal particles. For example, fire safety equipment uses polyester thermoplastic and antimony sources with halogenated additives. The use of metals as additives in composites has captured the attention of researchers worldwide due to safety concern in consideration of people's life and public properties. This review establishes the state-of-art flame resistance properties of metals/polymer composites for numerous industrial applications.

Filters

Please provide feedback to Administrator ([email protected])

External Links