Displaying publications 761 - 780 of 1041 in total

Abstract:
Sort:
  1. AL-Bayaty, F.H., Omar Emad Ibrahim, William, C., Khairuddin, N.A.
    Compendium of Oral Science, 2018;5(1):26-36.
    MyJurnal
    Objective: This retrospective study aims to evaluate the possible effects of antihypertensive drugs on alveolar bone loss in patients with chronic periodontitis. Methods: 50 patients on antihypertensive drugs selected as the experimental group and 50 patients with chronic periodontitis with no known systemic illnesses as control group were randomly selected as the study samples. Orthopantomographs were obtained, calibration and assessment of alveolar bone loss was performed by using the computer software program available in the faculty, through radiographic linear measurement procedure. Premolars, first and second molars of both maxilla and mandible were measured from the most apical point to the cementoenamel junction for mesial and distal aspects in the form of millimetres and percentile of the root length. Data was statistically analyzed using independent t-test and Analysis of Covariance in SPSS Version 23 with significance at P-value, p
    Matched MeSH terms: Radiography, Panoramic
  2. Muhamad NI, Mohd Nawi SN, Yusoff BM, Ab Halim NA, Mohammad N, Wan Ghazali WS
    Respir Med Case Rep, 2020;31:101276.
    PMID: 33209576 DOI: 10.1016/j.rmcr.2020.101276
    Vanishing lung syndrome (VLS) is a rare condition characterized by giant emphysematous bullae. It is frequently misdiagnosed as pneumothorax. We describe a case of a 30-year-old male who presented with shortness of breath, reduced effort tolerance, and pleuritic chest pain for three months. He was initially diagnosed with bilateral pneumothorax based on clinical examination and chest radiograph findings. However, further imaging with a high resolution computed tomography (HRCT) of the thorax confirmed bilateral giant emphysematous bullae. Our patient subsequently underwent video-assisted thoracoscopic surgery (VATS) and bullectomy. In this report, we discuss the clinical presentations, radiological features, and the management of VLS. We also highlight the differentiating features of VLS from a pneumothorax.
    Matched MeSH terms: Radiography
  3. Goh CH, Hamzah MR, Kandasamy R, Ghani ARI, Wong SH, Idris Z, et al.
    Med J Malaysia, 2020 11;75(6):666-671.
    PMID: 33219175
    INTRODUCTION: Chiari malformation (CM) is a disorder of mesodermal origin and is commonly associated with syringomyelia. Foramen magnum decompression is the first-line of standard treatment in symptomatic patients with a confirmed radiographic diagnosis. Magnetic resonance (MR) cine allows accurate evaluation of cerebrospinal fluid (CSF) physiology at the craniovertebral junction but often this is under-utilised in Malaysia.

    METHODS: In this series, we looked into nine cases of CM with syringomyelia from clinical and radiological perspective before and after surgery. The radiological parameters were herniated tonsillar length, syrinx: cord ratio, syrinx length and diameter. Flow velocity and morphologic changes in Chiari were illustrated.

    RESULTS: Seven patients showed either reduction in syrinx length, syrinx: cord ratio or both postoperatively. Clinical recovery somewhat varied in motor and sensory symptoms. Four patients gained better functional grade in modified Rankin scale (MRS) while the rest remained similar. The study highlighted the advantage of CSF flow dynamics information over MR anatomical radiographic improvement in addressing the neurologic and functional recovery. We also discussed the practicality of cine sequence in preoperative patient selection, syrinx analysis and postoperative flow evaluation in anticipation of clinical outcome.

    CONCLUSION: Phase-contrast cine MRI is a useful tool dictated by resource availability. We recommend its routine use in preoperative analysis and subsequent observational follow-up after surgery.

    Matched MeSH terms: Radiography
  4. Seb, Omayma, Fauzana, K., Aisyah, M.R., Noraidah, M., Noor Hamidah, H.
    Medicine & Health, 2018;13(1):220-226.
    MyJurnal
    Langerhans cell histiocytosis (LCH) is a clonal histiocytic disorder. The variable clinical manifestations from isolated bone lesion to multisystem disease can cause difficulties and delay in diagnosis. We report a 2 years and 8 months-old girl who presented with a 2 weeks history of persistent fever and weight loss associated with progressive abdominal distension. Physical examination revealed pallor, bilateral proptosis, seaborrheic dermatitis over the scalp and hepatosplenomegaly. Skull X-ray demonstrated multiple lytic lesions at the base and the skull vault. Bone marrow morphology showed numerous abnormal Langerhans cells (LCs) and foamy macrophages. The trephine immunohistochemistry (IHC) stains for CD1a, S-100 and CD68 were inconclusive. The diagnosis of multisystem Langerhans cell histiocytosis (MS-LCH) in this patient was based on the clinical presentation, radiological and morphological analysis. She subsequently received chemotherapy and currently she is on maintenance therapy with a good clinical response. LCH is a rare disease and although the IHC was inconclusive, the correlation of clinical, radiological and morphological data are essential for the diagnosis.
    Matched MeSH terms: Radiography
  5. Hasan O, Fahad S, Sattar S, Umer M, Rashid H
    Malays Orthop J, 2018 Nov;12(3):24-30.
    PMID: 30555643 DOI: 10.5704/MOJ.1811.006
    Introduction: Ankle arthrodesis using the Ilizarov technique provides high union rate with the added benefits of early weight-bearing, and the unique advantage of its ability to promote regeneration of soft tissue around the bone, including skin, muscle and neuro-vascular structures, and its versatility to allow correction of the position of the foot by adjusting the frame post-operatively as needed. We describe our experience with this technique and the functional outcomes in our patients. Materials and Methods: This retrospective study was conducted in 20 ankle fusion cases using the Ilizarov method between the years 2007 and 2017. We defined success in treatment by loss of preoperative symptoms and radiological union on plain radiographs of the ankle. Results: Fusion was achieved in all patients (100%). Immediate post-operative ambulation was with full weight bearing (FWB) in 16 (83%) of the participants and non-weight bearing (NWB) in 3 patients (17%). Post-procedure 11 patients (67%) of the participants who were full weight bearing required some form of support for walking for 2-3 weeks. Post-operatively three patients had pin tract infection requiring intravenous antibiotics. Radiological union took range of 6-12 weeks, mean union time was 8 weeks. Only one patient required bone grafting due to bone loss. Average follow-up period was 10-45 months. Conclusion: The Ilizarov technique has a high union rate and leads to general favourable clinical outcome and may be considered for any ankle arthrodesis but is especially useful in complex cases such as for revisions, soft-tissue compromise, infection and in patients with risk for non-union. Early weight bearing is an extra benefit.
    Matched MeSH terms: Radiography
  6. Thangaraju S, Cepni S, Magosch P, Tauber M, Habermeyer P, Martetschläger F
    Knee Surg Sports Traumatol Arthrosc, 2019 Dec;27(12):3821-3826.
    PMID: 31410526 DOI: 10.1007/s00167-019-05662-5
    PURPOSE: Arthroscopically assisted acromioclavicular joint (ACJ) stabilization techniques use bone tunnels in the clavicle and coracoid process. The tunnel size has been shown to have an impact on the fracture risk of clavicle and coracoid. The aim of the present study was to radiographically evaluate the alterations of the clavicular tunnel size in the early post-operative period. It was hypothesized that there would be a significant increase of tunnel size.

    METHODS: Twenty consecutive patients with acute high-grade ACJ (Rockwood type IV-V) injury underwent arthroscopic-assisted ACJ stabilization. The median age of the patients was 40 (26-66) years. For all patients, a single tunnel button-tape construct was used along with an additional ACJ tape cerclage. Radiologic measurements were undertaken on standardized Zanca films at two separate time points, immediate post-operative examination (IPO) and at late post-operative examination (> 4 months; LPO). The LPO radiographs were taken at a median follow-up period of 4.5 (3-6) months. Clavicular tunnel width (CT) and coracoclavicular distance (CCD) were measured using digital calipers by two independent examiners and the results are presented as median, range, and percentage.

    RESULTS: The median CCD increased significantly from 9.5 (8-13) mm at IPO to 12 (7-20) mm at LPO (p 

    Matched MeSH terms: Radiography
  7. Ikumapayi OM, Akinlabi ET
    Data Brief, 2019 Feb;22:537-545.
    PMID: 30627604 DOI: 10.1016/j.dib.2018.12.067
    Coconut Shell (CS) as agricultural lignocellulosic biomaterial and agro-waste is predominantly available in India, Malaysia, Nigeria, Thailand, Sri Lanka, and Indonesia. It has proven to have effective durability characteristic, good abstractive resistance, high toughness, and good adsorption properties, and is most suitable for long standing use in many applications such as reinforcement, source of energy, fillers as well as activated carbon and its performance, efficiency and effectiveness depend wholly on whether is in form of nano-, micro-, and macro- particles. In this data, effects of milling time on morphological characteristics was experimented using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and X-Ray Fluorescence (XRF) analyses. The SEM images were taken at magnifications of 1.00kx, 2.00kx and 5.00kx which gives respective 50 µm, 20 µm and 10 µm in different milling time of 0, 20, 40 and 60 mins. Digital Vibratory Disc Milling Machine (VDMM) rated 380 V/50 Hz at 940 rpm was employed for the grinding and the morphology of the milled nanoparticles were characterised. It was revealed from the data collected that 0 min (i.e. 75 µm sieved) has the highest mean area value of 16.105 µm2 and area standard deviation of 200.738 µm2 with least value of a number of particle size distribution of 809 µm. In contrast, 60 mins milled has the lowest values for mean area and area standard deviation of 8.945 µm2 and 115.851 µm2 respectively with the highest number of particle size distribution of 2032 µm. It was observed that milling time increases the number of particle sizes distributions and reduces the area of particle size.
    Matched MeSH terms: Radiography
  8. Kwan MK, Chiu CK, Goh SH, Ng SJ, Tan PH, Chian XH, et al.
    Clin Spine Surg, 2019 Jul;32(6):256-262.
    PMID: 30640749 DOI: 10.1097/BSD.0000000000000769
    STUDY DESIGN: Retrospective study.

    OBJECTIVE: This study looked into whether crossbar can reliably measure Upper Instrumend Vertebra (UIV) tilt angle intraoperatively and accurately predict the UIV tilt angle postoperatively and at final follow-up.

    SUMMARY OF BACKGROUND DATA: Postoperative shoulder imbalance is a common cause of poor cosmetic appearance leading to patient dissatisfaction. There were no reports describing the technique or method in measuring the UIV tilt angle intraoperatively. Therefore, this study was designed to look into the reliability and accuracy of the usage of intraoperative crossbar in measuring the UIV tilt angle intraoperatively.

    METHODS: Lenke 1 and 2 Adolescent Idiopathic Scoliosis patients who underwent instrumented Posterior Spinal Fusion using pedicle screw constructs with minimum follow-up of 24 months were recruited for this study. After surgical correction, intraoperative UIV tilt angle was measured using a crossbar. Immediate postoperative and final follow up UIV tilt angle was measured on the standing anteroposterior radiographs.

    RESULTS: A total of 100 patients were included into this study. The reliability of the intraoperative crossbar to measure the optimal UIV tilt angle intraoperatively was determined by repeated measurements by assessors and measurement by different assessors. We found that the intra observer and inter observer reliability was very good with intraclass correlation coefficient values of >0.9. The accuracy of the intraoperative crossbar to measure the optimal UIV tilt angle intraoperatively was determined by comparing this measurement with the postoperative UIV tilt angle. We found that there was no significant difference (P>0.05) between intraoperative, immediate postoperative, and follow-up UIV tilt angle.

    CONCLUSIONS: The crossbar can be used to measure the intraoperative UIV tilt angle consistently and was able to predict the postoperative UIV tilt angle. It was a cheap, simple, reliable, and accurate instrument to measure the intraoperative UIV tilt angle.

    Matched MeSH terms: Radiography
  9. Tan HL, Faisal M, Soo CI, Ban AY, Manap RA, Hassan TM
    BMC Pulm Med, 2016 09 07;16(1):131.
    PMID: 27604085 DOI: 10.1186/s12890-016-0293-2
    BACKGROUND: Dental laboratory technicians are at risk of developing occupational respiratory diseases due to exposure to various potentially toxic substances in their working environment. Since 1939, few cases of silicosis among dental technician have been reported.

    CASE PRESENTATION: We illustrate a 38 year-old female, who worked in a dental laboratory for 20 years, initially treated as pulmonary tuberculosis and chronic necrotising aspergillosis without much improvement. Computed tomography guided lung biopsy and bronchoscopic transbronchial lung biopsy were performed. Lung tissue biopsies showed presence of refractile dental materials within the areas of histiocyte proliferation. The diagnosis of dental technician pneumoconiosis was obtained and our patient underwent pulmonary rehabilitation.

    CONCLUSIONS: This case highlights the importance of obtaining a detailed occupational history in tuberculosis endemic area, as pulmonary tuberculosis is a great mimicker of other respiratory diseases.
    Matched MeSH terms: Radiography, Thoracic
  10. Hashim AN, Salleh MAAM, Sandu AV, Ramli MM, Yee KC, Mohd Mokhtar NZ, et al.
    Materials (Basel), 2021 Feb 05;14(4).
    PMID: 33562471 DOI: 10.3390/ma14040738
    The evolution of internal compressive stress from the intermetallic compound (IMC) Cu6Sn5 growth is commonly acknowledged as the key inducement initiating the nucleation and growth of tin (Sn) whisker. This study investigates the effect of Sn-0.7Cu-0.05Ni on the nucleation and growth of Sn whisker under continuous mechanical stress induced. The Sn-0.7Cu-0.05Ni solder joint has a noticeable effect of suppression by diminishing the susceptibility of nucleation and growth of Sn whisker. By using a synchrotron micro X-ray fluorescence (µ-XRF) spectroscopy, it was found that a small amount of Ni alters the microstructure of Cu6Sn5 to form a (Cu,Ni)6Sn5 intermetallic layer. The morphology structure of the (Cu,Ni)6Sn5 interfacial intermetallic layer and Sn whisker growth were investigated by scanning electron microscope (SEM) in secondary and backscattered electron imaging mode, which showed that there is a strong correlation between the formation of Sn whisker and the composition of solder alloy. The thickness of the (Cu,Ni)6Sn5 IMC interfacial layer was relatively thinner and more refined, with a continuous fine scallop-shaped IMC interfacial layer, and consequently enhanced a greater incubation period for the nucleation and growth of the Sn whisker. These verification outcomes proposes a scientifically foundation to mitigate Sn whisker growth in lead-free solder joint.
    Matched MeSH terms: Radiography
  11. Taufiqurrahman I, Ahmad A, Mustapha M, Lenggo Ginta T, Ady Farizan Haryoko L, Ahmed Shozib I
    Materials (Basel), 2021 Feb 27;14(5).
    PMID: 33673716 DOI: 10.3390/ma14051129
    Welding parameters obviously determine the joint quality during the resistance spot welding process. This study aimed to investigate the effect of welding current and electrode force on the heat input and the physical and mechanical properties of a SS316L and Ti6Al4V joint with an aluminum interlayer. The weld current values used in this study were 11, 12, and 13 kA, while the electrode force values were 3, 4, and 5 kN. Welding time and holding time remained constant at 30 cycles. The study revealed that, as the welding current and electrode force increased, the generated heat input increased significantly. The highest tensile-shear load was recorded at 8.71 kN using 11 kA of weld current and 3 kN of electrode force. The physical properties examined the formation of a brittle fracture and several weld defects on the high current welded joint. The increase in weld current also increased the weld diameter. The microstructure analysis revealed no phase transformation on the SS316L interface; instead, the significant grain growth occurred. The phase transformation has occurred on the Ti6Al4V interface. The intermetallic compound layer was also investigated in detail using the EDX (Energy Dispersive X-Ray) and XRD (X-Ray Diffraction) analyses. It was also found that both stainless steel and titanium alloy have their own fusion zone, which is indicated by the highest microhardness value.
    Matched MeSH terms: Radiography
  12. Nur Aishah Jusnaidi, Nurul Fadhlina Ismail
    MyJurnal
    Assessing the repeat rate is crucial to reduce unnecessary dose to the patient by identifying the major cause for repeating the x-rays exposure to the patient and apply corrective measures. To analyse the repeat rate of routine lower limb projections in direct digital radiography (DR) from general radiology department of Pantai Klang Hospital. 26 months retrospective repeated radiograph was acquired from Picture Archiving and Communication System (PACS) at Hospital Pantai Klang. The retrieved radiographs were grouped based on the reason for the i radiographs being rejected which are incorrect positioning, incorrect collimation, patient movement, incorrect exposure factors, artefact, and other reasons. Total repeated radiographs retrieved for basic lower limbs projections were 13616. Knee was the highest repeted examination and the lowest repeat rate was tibia fibula. (repeat rate: knee = 1.04%, tibia fibula = 0.57%). incorrect positioning is the major causes for repeat exposure for all examinations type, followed by incorrect collimation, other categories, centring ray error, incorrect exposure factors and artifact.
    Matched MeSH terms: Radiography
  13. Zuber SH, Hashikin NAA, Mohd Yusof MF, Aziz MZA, Hashim R
    Appl Radiat Isot, 2021 Apr;170:109601.
    PMID: 33515930 DOI: 10.1016/j.apradiso.2021.109601
    Experimental particleboards are made from Rhizophora spp. wood trunk with three different percentages of lignin and soy flour (0%, 6% and 12%) as adhesives. The objective was to investigate the equivalence of Rhizophora spp. particleboard as phantom material with human soft tissue using Computed Tomography (CT) number. The linear and mass attenuation coefficient of Rhizophora spp. particleboard at low energy range was also explored using X-ray Fluorescence (XRF) configuration technique. Further characterization of the particleboard was performed to determine the effective atomic number, Zeff using Energy Dispersive X-Ray (EDX) method. Adhesive-bonded Rhizophora spp. particleboard showed close similarities with water, based on the average CT numbers, electron density calibration curve and the analysis of CT density profile, compared to the binderless particleboard. The effective atomic number obtained from the study indicated that the attenuation properties of all the particleboards at different percentages of adhesives were almost similar to water. The mass attenuation coefficient calculated from XRF configuration technique showed good agreement with water from XCOM database, suggesting its potential as phantom material for radiation study.
    Matched MeSH terms: Radiography
  14. Faris MA, Abdullah MMAB, Muniandy R, Abu Hashim MF, Błoch K, Jeż B, et al.
    Materials (Basel), 2021 Mar 09;14(5).
    PMID: 33803313 DOI: 10.3390/ma14051310
    Geopolymer concrete has the potential to replace ordinary Portland cement which can reduce carbon dioxide emission to the environment. The addition of different amounts of steel fibers, as well as different types of end-shape fibers, could alter the performance of geopolymer concrete. The source of aluminosilicate (fly ash) used in the production of geopolymer concrete may lead to a different result. This study focuses on the comparison between Malaysian fly ash geopolymer concrete with the addition of hooked steel fibers and geopolymer concrete with the addition of straight-end steel fibers to the physical and mechanical properties. Malaysian fly ash was first characterized by X-ray fluorescence (XRF) to identify the chemical composition. The sample of steel fiber reinforced geopolymer concrete was produced by mixing fly ash, alkali activators, aggregates, and specific amounts of hook or straight steel fibers. The steel fibers addition for both types of fibers are 0%, 0.5%, 1.0%, 1.5%, and 2.0% by volume percentage. The samples were cured at room temperature. The physical properties (slump, density, and water absorption) of reinforced geopolymer concrete were studied. Meanwhile, a mechanical performance which is compressive, as well as the flexural strength was studied. The results show that the pattern in physical properties of geopolymer concrete for both types of fibers addition is almost similar where the slump is decreased with density and water absorption is increased with the increasing amount of fibers addition. However, the addition of hook steel fiber to the geopolymer concrete produced a lower slump than the addition of straight steel fibers. Meanwhile, the addition of hook steel fiber to the geopolymer concrete shows a higher density and water absorption compared to the sample with the addition of straight steel fibers. However, the difference is not significant. Besides, samples with the addition of hook steel fibers give better performance for compressive and flexural strength compared to the samples with the addition of straight steel fibers where the highest is at 1.0% of fibers addition.
    Matched MeSH terms: Radiography
  15. Mohamed Shah FZ, Mohamad AF, Zainordin NA, Eddy Warman NA, Wan Muhamad Hatta SF, Abdul Ghani R
    Ann Med Surg (Lond), 2021 Apr;64:102240.
    PMID: 33868680 DOI: 10.1016/j.amsu.2021.102240
    Introduction: Insulinoma is a functioning pancreatic neuroendocrine tumor primarily leading due to hypoglycemia due to hypersecretion of insulin. This case illustrates the real challenges faced in the detection of an occult insulinoma, which resulted in a protracted course of the disease.

    Case presentation: A 33-year-old female presented with recurrent hypoglycemia. Endogenous hyperinsulinemia was confirmed by a prolonged fast, however serial imaging was negative. Incidental finding of an ovarian mass gave rise to the suspicion of an insulin-producing ovarian tumor. Subsequent multimodality pancreatic imaging remained negative, requiring more invasive investigations. The tumor was localized by specialized arteriography using calcium stimulation to support the diagnosis of an insulinoma. However, repeated negative imaging led to further delays in definitive management, with worsening hypoglycemia. The surgery was finally performed three years after the initial presentation with successful removal of the tumor using intra-operative ultrasound.

    Clinical discussion: It is important to emphasize that preoperative radiological imaging is useful to localize pancreatic lesions. However, most insulinomas could only be detected intraoperatively. The absence of suggestive radiological evidence should not deter surgeons from proceeding with definitive surgical intervention.

    Conclusion: The case highlights the importance of a multidisciplinary approach in the management of a complicated case.

    Matched MeSH terms: Radiography
  16. Chong VF, Pathmanathan R
    Ann Acad Med Singap, 1993 Sep;22(5):807-10.
    PMID: 8267366
    Behçet's syndrome is a rare multisystem disorder. The occurrence in families although well recognised is uncommon. The mode of inheritance, however, has not been elucidated. Sixty-one cases of familial disease have been documented to date. There was only one previous report on familial Behçet's syndrome with gastrointestinal involvement. This paper reports two cases of Behçet's syndrome with gastrointestinal involvement in a Malaysian woman of Chinese ethnic origin and her child. The mother satisfied three major criteria (oral ulcers, genital ulcers and erythema nodosum) and one minor criterion (gastrointestinal involvement). Her son satisfied two major criteria (oral and genital ulcers) and three minor criteria (intestinal involvement, central nervous manifestation and a positive family history). The radiological and pathological features of the gastrointestinal lesions in both patients resembled those of Crohn's disease. The literature on Behçet's syndrome is reviewed.
    Matched MeSH terms: Radiography
  17. Johan S, Hassan MF, Hayati F, Azizan N, Payus AO, Edwin See UH
    Front Surg, 2020;7:585411.
    PMID: 33195391 DOI: 10.3389/fsurg.2020.585411
    Retroperitoneal cystic mass is a rare surgical condition that is often misdiagnosed preoperatively. Here, we report a case of a 56-year-old woman who presented with abdominal swelling for a 1-year duration, which was associated with lower abdominal pain for 6 months. Her abdominal radiograph showed a huge radiopaque lesion, and contrast-enhanced computed tomography scan of the abdomen reported it as a left ovarian serous cystadenoma causing local mass effect to the left ureter leading to mild left hydronephrosis. She underwent exploratory laparotomy and noted there was a huge retroperitoneal cystic mass. The histopathological assessment finding was consistent with a benign retroperitoneal cyst. This case report aims to share the rare case of primary retroperitoneal lesions, which can cause a diagnostic challenge preoperatively to all clinicians despite advanced achievement in medical imaging.
    Matched MeSH terms: Radiography, Abdominal
  18. Sayed, I. S., Yusri, N. H.
    MyJurnal
    In radiography, radiation workers are responsible to protect patients and their caregivers from adverse effects of X-rays during diagnostic procedures. The X-ray examination rooms are designated as controlled areas where only authorised persons are allowed to enter. However, sometimes radiographers allow next in-line patients’ and caregivers in X-ray examination room and ask them to stand behind the mobile lead shielding when exposure is on. The objectives of this study were to determine the amount of scatter radiation dose at different heights with respect to the floor in the X-ray examination room and to educate and increase the awareness of radiation workers about the scattered radiation in minimizing the unnecessary radiation dose to patient’s caregivers. Siemens Multix Top X-ray system was used. Kyoto Kagaku PBU-50 whole body phantom was scanned. The phantom (torso) was positioned for anteroposterior (AP) lumbar projection on the examination table. The nanoDot OSLDs were fixed behind the lead shielding at different heights (120, 130, 140, 150, 160 and 170 cm) with respect to the floor 2.5 meters away from the central ray of X-ray beam. The phantom was exposed using different tube voltages 68 kVp, 79 kVp and 90 kVp at a constant tube current of 32 mAs fixing a 100 cm source to image distance (SID). Scatter radiation doses measured at different heights were different for each exposure. The highest scattered radiation dose measured was 6.4 mGy at 130 cm height for 79 kVp exposure. In conclusion the measured scattered radiation doses were within the acceptable annual dose limits as recommended by NCRP 116 and ICRP 103 for patient caregiver. However, a smallest amount of radiation dose may increase the risk of cancer. Thus, the negligence must not be overlooked because it exposes the caregiver to unnecessary radiation.
    Matched MeSH terms: Radiography
  19. Jha V, Ahmed T
    Malays Orthop J, 2020 Jul;14(2):72-82.
    PMID: 32983380 DOI: 10.5704/MOJ.2007.015
    Introduction: Proximal femoral nail (PFN) is a commonly used implant for intertrochanteric fractures which is designed according to western femoral measurements. However, anthropometry of proximal femur in Indian and in general, Asian, are smaller. So a modified short PFN with smaller dimensions was developed. This study analyses the radiological and functional outcome of treatment of intertrochanteric fractures with modified short PFN.

    Materials and Methods: A retrospective study analysed 120 adult patients operated between 2014-2017 using modified short PFN for intertrochanteric fractures, having a minimum follow-up of 12 months. Clinical and radiological parameters including tip-apex distance (TAD), position of tip of lag screw in femoral head, lateral slide of lag screw as well as length of anti-rotation screw were measured. Final functional outcome was assessed using Barthel's index and Kyle's criteria.

    Results: Good reduction was achieved in 90.83% cases and 79.16% had ideal placement of lag screw in femoral head. Intra-operative difficulties were encountered in 13.33% (n=16). Mean TAD AP (anteroposterior) was 11.8mm, TAD LAT (lateral) was 11.0mm and mean TAD TOT was 22.8mm. Overall mean lateral slide was 3.20mm and it was more in unstable fracture. We had five mechanical failures, one patient with screw breakage without loss of reduction and two peri-implant fractures after union. 81.66% returned to pre-injury levels of activity with 88.33% good to excellent outcome as per Kyle's criteria.

    Conclusion: Although, not devoid of complications, modified short PFN results in good functional recovery of patients with intertrochanteric fractures of femur.

    Matched MeSH terms: Radiography
  20. Che Nor Zarida Che Seman, Zamzuri Zakaria
    MyJurnal
    Critical size defects (CSD) in the long bones of New Zealand White rabbits (Oryctolagus cuniculus) have been used for years as an experimental model for investigation of the effectiveness of a new bone substitute material. There are varieties of protocols available in the literature. This technical note attempts to present an alternative surgical technique of a CSD in the New Zealand white rabbit tibia. Methods: Thirty-nine New Zealand White rabbits were used in this study. A CSD of approximately 4.5 mm (width) X 9.0 mm (length) was surgically drilled at the proximal tibial metaphysis, approximately 1 cm from the knee joint. The surrounding of soft tissue was repositioned and sutured layer by layer with bioabsorbable surgical suture. Two x-rays of anteroposterior and lateral were taken before assessed under computed tomography scan at 6, 12 and 24 weeks. Results: This alternative method created CSD with less bleeding from the muscle observed. No mortality or other surgical complications observed within 6 weeks, 12 weeks and 24 weeks following surgery. Conclusion: A simple and safe method for performing CSD was demonstrated and recommended as an alternative approach for surgery on New Zealand White rabbits.
    Matched MeSH terms: Radiography
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links