Displaying publications 41 - 60 of 76 in total

Abstract:
Sort:
  1. Wan Omar WH, Sarbon NM
    J Food Sci Technol, 2016 Nov;53(11):3928-3938.
    PMID: 28035148 DOI: 10.1007/s13197-016-2379-5
    The aim of this study is to investigate the functional and antioxidant properties of chicken skin gelatin hydrolysate (CSGH) as affected by the drying method used in the preparation of gelatin (freeze-dried and vacuum dried). CSGH obtained from freeze-dried gelatin showed better functional properties such as emulsifying activity index (EAI), water holding and oil binding capacity at different pH compared to CSGH produced from vacuum dried gelatin. Meanwhile, the CSGH of the vacuum dried gelatin exhibited a better emulsifying stability index (ESI), foaming capacity and stability. CSGH from freeze-dried gelatin showed better antioxidant, DPPH radical scavenging and metal chelating activity.
    Matched MeSH terms: Vacuum
  2. Nam WL, Phang XY, Su MH, Liew RK, Ma NL, Rosli MHNB, et al.
    Sci Total Environ, 2018 May 15;624:9-16.
    PMID: 29245037 DOI: 10.1016/j.scitotenv.2017.12.108
    Microwave vacuum pyrolysis of palm kernel shell (PKS) was performed to produce biochar, which was then tested as bio-fertilizer in growing Oyster mushroom (Pleurotus ostreatus). The pyrolysis approach produced biochar containing a highly porous structure with a high BET surface area of up to 270m2/g and low moisture content (≤10wt%), exhibiting desirable adsorption properties to be used as bio-fertilizer since it can act as a housing that provides many sites on which living microorganisms (mycelium or plant-growth promoting bacteria) and organic nutrients can be attached or adsorbed onto. This could in turn stimulate plant growth by increasing the availability and supply of nutrients to the targeted host plant. The results from growing Oyster mushroom using the biochar recorded an impressive growth rate and a monthly production of up to about 550g of mushroom. A shorter time for mycelium growth on one whole baglog (21days) and the highest yield of Oyster mushroom (550g) were obtained from cultivation medium added with 20g of biochar. Our results demonstrate that the biochar-based bio-fertilizer produced from microwave vacuum pyrolysis of PKS shows exceptional promise as growth promoting material for mushroom cultivation.
    Matched MeSH terms: Vacuum
  3. Gholizadeh H, Lemaire ED, Eshraghi A
    Clin Biomech (Bristol, Avon), 2016 08;37:108-116.
    PMID: 27423025 DOI: 10.1016/j.clinbiomech.2016.06.005
    BACKGROUND: An optimal suspension system can improve comfort and quality of life in people with limb loss. To guide practice on prosthetic vacuum suspension systems, assessment of the current evidence and professional opinion are required.

    METHODS: PubMed, Web of Science, and Google Scholar databases were explored to find related articles. Search terms were amputees, artificial limb, prosthetic suspension, prosthetic liner, vacuum, and prosthesis. The results were refined by vacuum socket or vacuum assisted suspension or sub-atmospheric suspension. Study design, research instrument, sample size, and outcome measures were reviewed. An online questionnaire was also designed and distributed worldwide among professionals and prosthetists (www.ispoint.org, OANDP-L, LinkedIn, personal email).

    FINDINGS: 26 articles were published from 2001 to March 2016. The number of participants averaged 7 (SD=4) for transtibial and 6 (SD=6) for transfemoral amputees. Most studies evaluated the short-term effects of vacuum systems by measuring stump volume changes, gait parameters, pistoning, interface pressures, satisfaction, balance, and wound healing. 155 professionals replied to the questionnaire and supported results from the literature. Elevated vacuum systems may have some advantages over the other suspension systems, but may not be appropriate for all people with limb loss.

    INTERPRETATION: Elevated vacuum suspension could improve comfort and quality of life for people with limb loss. However, future investigations with larger sample sizes are needed to provide strong statistical conclusions and to evaluate long-term effects of these systems.

    Matched MeSH terms: Vacuum*
  4. Boo NY
    Singapore Med J, 1990 Jun;31(3):207-10.
    PMID: 2392696
    In a 30-month prospective study, between January 1987 and June 1989, 101 of 64,424 Malaysian neonates (1.6 per 1000 livebirths) born in the Maternity Hospital, Kuala Lumpur were found to have subaponeurotic haemorrhage shortly after delivery. The incidence was highest in neonates weighting 4000 gm or more. There was no significant difference in incidence of this condition in neonates of different ethnic origins. Hypoprothrombinemia was present in only 5/101 (5.0%) of the affected neonates. Sixty seven (66.3%) of the neonates with subaponeurotic haemorrhage had history of trial of vacuum extraction. The incidence of subaponeurotic haemorrhage was significantly higher in neonates delivered by vacuum extraction than by other modes of delivery in this hospital (41.4 per 1000 livebirths in neonates delivered by vacuum extraction versus 1.0 per 1000 livebirths in neonates delivered by other modes). Those neonates who developed subaponeurotic haemorrhage without trial of vacuum extraction had a history of either prolonged labour or difficult delivery. Thirty-three (32.7%) of the neonates with subaponeurotic haemorrhage developed anaemia which required blood transfusion and 3/33 (9.1%) were in shock. Fifty seven (56.4%) of the neonates with subaponeurotic haemorrhage developed hyperbilirubinemia due to the haemorrhage. Four (7.0%) of them had severe unconjugated hyperbilirubinemia which required exchange transfusion. The results of this study suggest that subaponeurotic haemorrhage in Malaysian neonates was commonly associated with vacuum extraction and was not a benign condition.
    Matched MeSH terms: Vacuum Extraction, Obstetrical/adverse effects*
  5. Fu X, Norbäck D, Yuan Q, Li Y, Zhu X, Hashim JH, et al.
    Sci Total Environ, 2021 Jan 20;753:141904.
    PMID: 32890872 DOI: 10.1016/j.scitotenv.2020.141904
    Sick building syndrome (SBS) is a collection of nonspecific syndromes linked with the built environment. The occurrence of SBS is associated with humidity, ventilation, moulds and microbial compounds exposure. However, no study has reported the association between indoor microbiome and SBS. In this study, 308 students were surveyed for SBS symptoms from 21 classrooms of 7 junior high schools from Johor Bahru, Malaysia, and vacuum dust from floor, desks and chairs was collected. High throughput amplicon sequencing (16S rRNA gene and ITS region) and quantitative PCR were conducted to characterize the absolute concentration of bacteria and fungi taxa. In total, 326 bacterial and 255 fungal genera were detected in dust with large compositional variation among classrooms. Also, half of these samples showed low compositional similarity to microbiome data deposited in the public database. The number of observed OTUs in Gammaproteobacteria was positively associated with SBS (p = 0.004). Eight microbial genera were associated with SBS (p 
    Matched MeSH terms: Vacuum
  6. Mehmood A, Mubarak NM, Khalid M, Jagadish P, Walvekar R, Abdullah EC
    Sci Rep, 2020 11 18;10(1):20106.
    PMID: 33208815 DOI: 10.1038/s41598-020-77139-2
    Strain sensors in the form of buckypaper (BP) infiltrated with various polymers are considered a viable option for strain sensor applications such as structural health monitoring and human motion detection. Graphene has outstanding properties in terms of strength, heat and current conduction, optics, and many more. However, graphene in the form of BP has not been considered earlier for strain sensing applications. In this work, graphene-based BP infiltrated with polyvinyl alcohol (PVA) was synthesized by vacuum filtration technique and polymer intercalation. First, Graphene oxide (GO) was prepared via treatment with sulphuric acid and nitric acid. Whereas, to obtain high-quality BP, GO was sonicated in ethanol for 20 min with sonication intensity of 60%. FTIR studies confirmed the oxygenated groups on the surface of GO while the dispersion characteristics were validated using zeta potential analysis. The nanocomposite was synthesized by varying BP and PVA concentrations. Mechanical and electrical properties were measured using a computerized tensile testing machine, two probe method, and hall effect, respectively. The electrical conducting properties of the nanocomposites decreased with increasing PVA content; likewise, electron mobility also decreased while electrical resistance increased. The optimization study reports the highest mechanical properties such as tensile strength, Young's Modulus, and elongation at break of 200.55 MPa, 6.59 GPa, and 6.79%, respectively. Finally, electrochemical testing in a strain range of ε ~ 4% also testifies superior strain sensing properties of 60 wt% graphene BP/PVA with a demonstration of repeatability, accuracy, and preciseness for five loading and unloading cycles with a gauge factor of 1.33. Thus, results prove the usefulness of the nanocomposite for commercial and industrial applications.
    Matched MeSH terms: Vacuum
  7. Bicchierai G, Nori J, De Benedetto D, Boeri C, Vanzi E, Bianchi S, et al.
    Tumori, 2019 Oct;105(5):378-387.
    PMID: 30558495 DOI: 10.1177/0300891618816212
    PURPOSE: To evaluate the role of contrast-enhanced spectral mammography (CESM) in the post biopsy management of breast lesions classified as lesions of uncertain malignant potential (B3) by core needle biopsy and vacuum-assisted biopsy (VAB).

    METHODS: The local ethics committee approved this retrospective study and for this type of study formal consent is not required. A total of 42 B3 lesions in 40 women aged 41-77 years were included in our study. All patients underwent CESM 2-3 weeks after the biopsy procedure and surgical excision was subsequently performed within 60 days of the CESM procedure. Three radiologists reviewed the images independently. The results were then compared with histologic findings.

    RESULTS: The sensitivity, specificity, and positive and negative predictive values for confirmed demonstration of malignancy at CESM were 33.3%, 87.2%, 16.7%, and 94.4% for reader 1; 66.7%, 76.9%, 18.2%, and 96.7% for reader 2; 66.7%, 74.4%, 16.7%, and 96.7% for reader 3. Overall agreement on detection of malignant lesions using CESM among readers ranged from moderate to substantial (κ = .451-.696), for categorization of BPE from moderate to substantial (κ = .562-.711), and for evaluation of lesion intensity enhancement from fair to moderate (κ = .346-.459).

    CONCLUSION: In cases of Breast Imaging Reporting and Data System (BI-RADS) 1, BI-RADS 2, or BI-RADS 3 results at CESM, follow-up or VAB rather than surgical biopsy might be performed.

    Matched MeSH terms: Vacuum
  8. Siti Hayati Mohd Nahwari, Bahiyah Abdullah, Suzanna Daud, Norhana Mohd Kasim, Norhana Mohd Kasim
    MyJurnal
    This case series highlights the outcome of four pregnancies complicated with COVID-19, as
    the pandemic of coronavirus disease 2019 (COVID-19) poses a lot of uncertainties due to lack
    of scientific evidence in guiding the management of pregnancy with COVID-19. The women
    were between 25 and 31 years of age and of 35 - 39 weeks of gestation with no underlying
    medical problems. Three women were delivered via caesarean section and one woman was
    delivered via ventouse delivery due to poor progress during the second stage of labour. Two
    women were in stage 4 of the disease (having breathing difficulties and requiring oxygen
    support) at presentations. One of them was treated with hydroxychloroquine (HC) only while
    another one was treated with both HC and antiviral medications; none required assisted
    ventilation during their hospitalizations. There is no vertical transmission of COVID-19 disease
    observed in this case series.
    Matched MeSH terms: Vacuum Extraction, Obstetrical
  9. Mohd Zainol, M.K., Abdul-Hamid A., Abu Bakar, F., Pak Dek, S.
    MyJurnal
    The effect of different drying methods on the degradation of flavonoids in Centella asiatica was evaluated. C. asiatica leaf, root and petiole were dried using air-oven, vacuum oven and freeze drier. Flavonoid was determined utilizing reverse-phase high performance liquid chromatography (RP-HPLC). Results of the study revealed the presence of high concentration of flavonoids in C. asiatica leaf, root and petiole, which include, naringin (4688.8 ± 69 μg/100 g, 3561.3 ± 205 μg/ 100 g, and 978.3 ± 96 μg/ 100 g), rutin (905.6 ± 123 μg/ 100 g, 756.07 ± 95 μg/ 100 g, and 557.25 ± 58 μg/ 100 g), quercetin (3501.1 ± 107 μg/ 100 g, 1086.31 ± 90 μg/ 100 g, and 947.63 ± 83 μg/ 100 g) and catechin (915.87 ± 6.01 μg/ 100 g, 400.6 ± 67 μg/ 100 g, and 250.56 ± 18 μg/ 100g). Luteolin, kaempferol and apigenin on the other hand, were inconsistently present in some parts of C. asiatica. Air-oven treatment resulted in the highest total flavonoids degradation followed by vacuum oven and freeze dried with percent degradation of 97%, 87.6% and 73%, respectively. Catechin and rutin were found to be the most stable flavonoids with percent degradation up to 35%, 66% and 76% for freeze dried, vacuum oven and air oven, respectively.
    Matched MeSH terms: Vacuum
  10. Rasli, H.I., Sarbon, N.M.
    MyJurnal
    This study investigates effects from different drying methods (vacuum oven dried vs. freeze dried) on the rheological, functional and structural properties of chicken skin gelatin compared to bovine gelatin. Vacuum oven dried chicken skin samples showed a higher gelatin yield (12.86%) than freeze-dried samples (9.25%). The latter showed a higher melting temperature (32.64oC) and superior foaming capacity (176%) as well as foaming stability (166.67%). Vacuum oven dried samples demonstrated greater fat binding capacity (5.5 ml/g) and emulsion stability (55.79%). There were no significant differences (p >0.05) in emulsion and water holding capacity for three gelatins. Bovine gelatin did hold the lowest of all functional properties studied. A Fourier Transform Infrared (FTIR) spectrum analysis of chicken skin gelatin under both drying methods presented structures similar to those of bovine gelatin. Collectively, this findings indicated no significant differences (p >0.05) in rheological, functional and structural properties for chicken skin gelatins prepared by either drying method. Hence, to save costs and maintain gelatin quality, vacuum oven drying offers potential as an alternative means of production.
    Matched MeSH terms: Vacuum
  11. SAMBHI JS
    Med J Malaysia, 1963 Jun;17:292-301.
    PMID: 14060507
    Matched MeSH terms: Vacuum
  12. Muanghorn W, Konsue N, Sham H, Othman Z, Mohamed F, Mohd Noor N, et al.
    J Food Sci Technol, 2018 May;55(5):1960-1965.
    PMID: 29666550 DOI: 10.1007/s13197-018-3104-3
    Effects of food irradiation on allergen and nutritional composition of giant freshwater prawn are not well documented. Thus, this study aimed to investigate the effects of gamma irradiation on tropomyosin allergen, proximate composition, and mineral elements in Macrobrachium rosenbergii. In this study, prawn was peeled, cut into small pieces, vacuum packaged and gamma irradiated at 0, 5, 7, 10 and 15 kGy with a dose rate of 0.5 kGy/h using cobalt-60 as the source, subsequently determined the level of tropomyosin, proximate composition and mineral elements respectively. The results showed that band density of tropomyosin irradiated at 10 and 15 kGy is markedly decreased. Proximate analysis revealed that moisture, protein, and carbohydrate content were significantly different as compared with non-irradiated prawn. Meanwhile, gamma irradiated M. rosenbergii at 15 kGy was observed to be significantly higher in nickel and zinc than the non-irradiated prawn. The findings provide a new information that food irradiation may affect the tropomyosin allergen, proximate composition and mineral elements of the prawn.
    Matched MeSH terms: Vacuum
  13. Muhammad Awaludin, M.S., Mariattia, M.
    MyJurnal
    Porous ceramic scaffolds are widely studied in the tissue engineering field due to their potential in medical applications as bone substitutes or as bone-filling materials. In this study, porous hydroxyapatite (HA) was produced via polymer replication method. Polyurethane (PU) sponge was selected as the template and synthetic binder, polyvinyl alcohol (PVA) was used in this study. Fixed formulation of HA powder, distilled water and PVA (40:60:3) were prepared and stirred at a constant 4 hours time. PU sponges with 30 ppi and 60 ppi size were cut and impregnated in slurry using vacuum and roller infiltration methods. The microstructures were observed by using field emission scanning electron microscope (FESEM). The results obtained indicate that vacuum infiltration method and 60 ppi template pore size exhibited the highest compressive strength with moderate average strut thickness and lowest average pore size compared to samples produced by roller infiltration method at different template pore size.
    Matched MeSH terms: Vacuum
  14. Atiqah MSN, Gopakumar DA, F A T O, Pottathara YB, Rizal S, Aprilia NAS, et al.
    Polymers (Basel), 2019 Nov 05;11(11).
    PMID: 31694184 DOI: 10.3390/polym11111813
    The conventional isolation of cellulose nanofibers (CNFs) process involves high energy input which leads to compromising the pulp fiber's physical and chemical properties, in addition to the issue of elemental chlorine-based bleaching, which is associated with serious environmental issues. This study investigates the characteristic functional properties of CNFs extracted via total chlorine-free (TCF) bleached kenaf fiber followed by an eco-friendly supercritical carbon dioxide (SC-CO2) treatment process. The Fourier transmission infra-red FTIR spectra result gave remarkable effective delignification of the kenaf fiber as the treatment progressed. TEM images showed that the extracted CNFs have a diameter in the range of 10-15 nm and length of up to several micrometers, and thereby proved that the supercritical carbon dioxide pretreatment followed by mild acid hydrolysis is an efficient technique to extract CNFs from the plant biomass. XRD analysis revealed that crystallinity of the fiber was enhanced after each treatment and the obtained crystallinity index of the raw fiber, alkali treated fiber, bleached fiber, and cellulose nanofiber were 33.2%, 54.6%, 88.4%, and 92.8% respectively. SEM images showed that amorphous portions like hemicellulose and lignin were removed completely after the alkali and bleaching treatment, respectively. Moreover, we fabricated a series of cellulose nanopapers using the extracted CNFs suspension via a simple vacuum filtration technique. The fabricated cellulose nanopaper exhibited a good tensile strength of 75.7 MPa at 2.45% strain.
    Matched MeSH terms: Vacuum
  15. Nordin Sabli, Zainal Abidin Talib, Chang CB, Wan Mahmood Mat Yunus, Zulkarnain Zainal, Hikmat S. Hilal, et al.
    Sains Malaysiana, 2014;43:1061-1067.
    Tin selenide (SnSe) and copper indium diselenide (CuInSe2) compounds were synthesized by high temperature reaction method using combination of sealed ampoule (at relatively low pressure ~10-1 Pa without inert gas) and heating at specific temperature profile in rocking furnace. Powder X-Ray diffraction analysis showed that the products involved only single phases of SnSe and of CuInSe2 only. Using the reaction products as source materials, the SnSe and CuInSe2 thin films were vacuum-deposited on glass substrates at room temperature. Structural, elemental, surface morphological and optical properties of the as-deposited films were studied by X-Ray diffraction (XRD), energy dispersive X-Ray (EDX) analysis, field emission scanning electron microscopy (FESEM) and UV-Vis-NIR spectroscopy. Single phase of SnSe and CuInSe2 films were obtained by thermal evaporation technique from synthesized SnSe and CuInSe2 compound without further treatment.
    Matched MeSH terms: Vacuum
  16. Abd Jalil SN, Wang DK, Yacou C, Motuzas J, Smart S, Diniz da Costa JC
    Materials (Basel), 2016 Nov 18;9(11).
    PMID: 28774057 DOI: 10.3390/ma9110938
    This work investigates the structural formation and analyses of titania membranes (TM) prepared using different vacuum exposure times for molecular weight (MW) cut-off performance and oil/water separation. Titania membranes were synthesized via a sol-gel method and coated on macroporous alumina tubes followed by exposure to a vacuum between 30 and 1200 s and then calcined at 400 °C. X-ray diffraction and nitrogen adsorption analyses showed that the crystallite size and particle size of titania increased as a function of vacuum time. All the TM membranes were mesoporous with an average pore diameter of ~3.6 nm with an anatase crystal morphology. Water, glucose, sucrose, and polyvinylpyrrolidone with 40 and 360 kDa (PVP-40 kDa and PVP-360 kDa) were used as feed solutions for MW cut-off and hexadecane solution for oil filtration investigation. The TM membranes were not able to separate glucose and sucrose, thus indicating the membrane pore sizes are larger than the kinetic diameter of sucrose of 0.9 nm, irrespective of vacuum exposure time. They also showed only moderate rejection (20%) of the smaller PVP-40 kDa, however, all the membranes were able to obtain an excellent rejection of near 100% for the larger PVP-360 kDa molecule. Furthermore, the TM membranes were tested for the separation of oil emulsions with a high concentration of oil (3000 ppm), reaching high oil rejections of more than 90% of oil. In general, the water fluxes increased with the vacuum exposure time indicating a pore structural tailoring effect. It is therefore proposed that a mechanism of pore size tailoring was formed by an interconnected network of Ti-O-Ti nanoparticles with inter-particle voids, which increased as TiO₂ nanoparticle size increased as a function of vacuum exposure time, and thus reduced the water transport resistance through the TM membranes.
    Matched MeSH terms: Vacuum
  17. How YH, Teo MYM, In LLA, Yeo SK, Bhandari B, Yusof YA, et al.
    J Appl Microbiol, 2024 Jul 02;135(7).
    PMID: 38955370 DOI: 10.1093/jambio/lxae162
    AIMS: This study aims to evaluate the storage stability of the freeze-dried recombinant Lactococcus lactis NZ3900-fermented milk powder expressing K-ras (Kristen rat sarcoma viral oncogene homolog) mimotopes targeting colorectal cancer in vacuum packaging.

    METHODS AND RESULTS: The freeze-dried L. lactis-fermented milk powder stored in 4-ply retortable polypropylene (RCPP)-polyamide (PA)-aluminium (AL)-polyethylene terephthalate (PET) and aluminium polyethylene (ALPE) was evaluated throughout 49 days of accelerated storage (38°C and 90% relative humidity). The fermented milk powder stored in 4-ply packaging remained above 6 log10 CFU g-1 viability, displayed lower moisture content (6.1%), higher flowability (43° angle of repose), water solubility (62%), and survivability of L. lactis after simulated gastric and intestinal digestion (>82%) than ALPE packaging after 42 days of accelerated storage. K-ras mimotope expression was detected intracellularly and extracellularly in the freeze-dried L. lactis-fermented milk powder upon storage.

    CONCLUSIONS: This suggests that fermented milk powder is a suitable food carrier for this live oral vaccine.

    Matched MeSH terms: Vacuum
  18. Boo NY, Foong KW, Mahdy ZA, Yong SC, Jaafar R
    BJOG, 2005 Nov;112(11):1516-21.
    PMID: 16225572
    To determine obstetric and neonatal risk factors associated with subaponeurotic haemorrhage (SAH) in infants exposed to vacuum extraction.
    Matched MeSH terms: Vacuum Extraction, Obstetrical/adverse effects*
  19. Trutnovsky G, Kamisan Atan I, Martin A, Dietz HP
    BJOG, 2016 Aug;123(9):1551-6.
    PMID: 26435045 DOI: 10.1111/1471-0528.13692
    OBJECTIVE: To analyse the associations between delivery mode and symptoms and signs of pelvic organ prolapse (POP) in a cohort of symptomatic women.

    DESIGN: Retrospective observational study.

    POPULATION: A total of 1258 consecutive women attending a tertiary urogynaecological unit for the investigation of lower urinary tract or pelvic floor disorders between January 2012 and December 2014.

    METHODS: Obstetric history and clinical examination data were obtained from the unit database. Prolapse quantification on imaging was performed using stored four-dimensional translabial ultrasound volume data sets. Women were grouped into four groups according to the most traumatic delivery reported. The presence of symptoms and signs of POP were compared between delivery groups while controlling for potential confounders.

    MAIN OUTCOME MEASURES: Prolapse symptoms, visual analogue score for prolapse bother, International Continence Society Prolapse Quantification System findings and ultrasound findings of anterior, central and posterior compartment descent.

    RESULTS: Nulliparae showed the lowest prevalence of most measures of POP, followed by women exclusively delivered by caesarean section. Highest prevalences were consistently found in women delivered at least once by forceps, although the differences between this group and women delivered by normal vaginal delivery and/or vacuum extraction were significant in three out of eight measures only. Compared with women in the caesarean section group, the adjusted odds ratios for reporting symptoms of prolapse were 2.4 (95% CI 1.30-4.59) and 3.2 (95% CI 1.65-6.12) in the normal vaginal delivery/vacuum extraction group and forceps group, respectively.

    CONCLUSIONS: There is a clear link between vaginal delivery and symptoms and signs of pelvic organ prolapse in urogynaecological patients.

    TWEETABLE ABSTRACT: Compared with caesarean section a history of vaginal delivery more than doubles the risk for POP.

    Matched MeSH terms: Vacuum Extraction, Obstetrical/statistics & numerical data
  20. Esther LSY, Chew KT, Rahman RA, Zainuddin AA, Hing EY, Kampan N
    Horm Mol Biol Clin Investig, 2020 Mar 13;41(2).
    PMID: 32167930 DOI: 10.1515/hmbci-2020-0001
    Intramyometrial ectopic pregnancy (IMEP) is a rare form of ectopic pregnancy. It is defined as a conceptus implanted within the myometrium and is completely surrounded by myometrium with clear separation from both the uterine cavity and tubes. IMEP possesses not only diagnostic but also therapeutic challenge. The majority of reported cases were managed by hysterectomy. Early management of unruptured IMEP using methotrexate may help to preserve fertility. We, for the first time, report a case of ruptured IMEP managed successfully using suction and curettage followed by Bakri balloon tamponade and avoiding hysterectomy. Post-procedure, the patient received two doses of intramuscular methotrexate 50 mg/m2 due to plateauing serial beta human chorionic gonadotropin (β-hCG) levels and subsequently achieved undetectable level 10 weeks post-methotrexate. She also had complete resolution of the ectopic intramyometrial mass.
    Matched MeSH terms: Vacuum Curettage*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links