Displaying publications 21 - 40 of 475 in total

Abstract:
Sort:
  1. Potential use of Lentinus squarrosulus mushroom as fermenting agent and source of natural antioxidant additive in livestock feed
    Abdullah N, Lau CC, Ismail SM
    J Sci Food Agric, 2016 Mar;96(5):1459-66.
    PMID: 25926021 DOI: 10.1002/jsfa.7242
    Fermenting feed has gained a lot of popularity in recent years owing to its renowned benefits to the livestock and feed quality. In the current study, Lentinus squarrosulus mushroom mycelium was tested for its potential as a fermenting agent and source of natural antioxidant in the feed.
    Matched MeSH terms: Fermentation
  2. Fermentation studies of stored cocoa beans
    Abdul Samah O, Ibrahim N, Alimon H, Abdul Karim MI
    World J Microbiol Biotechnol, 1993 Sep;9(5):603-4.
    PMID: 24420212 DOI: 10.1007/BF00386306
    Acetic and lactic acid bacteria on fermented cocoa beans were maximally 2.0×10(6) and 1.9×10(6) c.f.u./g wet wt, respectively. Acetic and lactic acids were detected on the second and fourth days of fermentation and were maximally 140 and 45 mg/10 g beans, respectively. There was a positive correlation between the sizes of the relevant microbial populations and the amounts of acids produced during fermentation.
    Matched MeSH terms: Fermentation
  3. Compatibility of utilising nitrogen-rich oil palm trunk sap for succinic acid fermentation by Actinobacillus succinogenes 130Z
    Bukhari NA, Loh SK, Nasrin AB, Luthfi AAI, Harun S, Abdul PM, et al.
    Bioresour Technol, 2019 Dec;293:122085.
    PMID: 31499328 DOI: 10.1016/j.biortech.2019.122085
    In this study, the potential of oil palm trunk (OPT) sap as a sole substrate for succinic acid (SA) production was evaluated using Actinobacillus succinogenes 130Z. After OPT sap was characterised, the effects of adding carbonate, yeast extract (YE) and minerals to this medium were investigated in an attempt to develop a low-cost fermentation medium. The OPT sap alone, gave comparable SA yield and productivity (0.54 g/g and 0.35 g/L/h) to those supplemented with YE (0.50 g/g and 0.36 g/L/h) and minerals (0.55 g/g and 0.40 g/L/h). The findings showed that OPT sap has sufficient amount of nutrients for SA biosynthesis by A. succinogenes 130Z and could potentially reduce cost without requiring expensive nutrients supplementation.
    Matched MeSH terms: Fermentation
  4. Sustainable and green pretreatment strategy of Eucheuma denticulatum residues for third-generation l-lactic acid production
    Chai CY, Tan IS, Foo HCY, Lam MK, Tong KTX, Lee KT
    Bioresour Technol, 2021 Jun;330:124930.
    PMID: 33735730 DOI: 10.1016/j.biortech.2021.124930
    Managing plastic waste remains an urgent environmental concern and switching to biodegradable plastics can reduce the dependence on depleting fossil fuels. This study emphasises the efficacy of macroalgae wastes, Eucheuma denticulatum residues (EDRs), as potential alternate feedstock to produce l-lactic acid (l-LA), the monomer of polylactic acid, through fermentation. An innovative environmental friendly strategy was explored in this study to develop a glucose platform from EDRs: pretreatment with microwave-assisted autohydrolysis (MAA) applied to enhance enzymatic hydrolysis of EDRs. The results indicate that MAA pretreatment significantly increased the digestibility of EDRs during the enzymatic hydrolysis process. The optimum pretreatment conditions were 120 °C and 50 min, resulting in 96.5% of enzymatic digestibility after 48 h. The high l-LA yield of 98.6% was obtained using pretreated EDRs and supplemented with yeast extract. The energy analysis implies that MAA pretreatment could further improve the overall energy efficiency of the process.
    Matched MeSH terms: Fermentation
  5. Reverse Micellar System in Protein Recovery - A Review of the latest developments
    Sankaran R, Bong JH, Chow YH, Wong FWF, Ling TC, Show PL
    Curr Protein Pept Sci, 2019 Jun 28.
    PMID: 31264547 DOI: 10.2174/1389203720666190628142203
    Reversed micellear system (RMS) is an innovative technique used for the isolation, extraction and purification of proteins and enzymes. Studies have demonstrated that RMS is an efficient purification technology for extracting proteins and enzymes from natural plant materials or fermentation broth. Lately, reverse micelles have created wider biological applications and with the ease of scaling up and the possibility for continuous process has made RMS a vital purification technique in various field. In this study, an extensive review of RMS with the current application in biotechnology will be examined. This review provides insights with the fundamental principles, key variables and parameters of RMS. In addition, a comparative study of RMS with other liquid-liquid extraction techniques are included. The present review aims to provide a general overview of RMS by summarising the research works, since the introduction of the technology to current development.
    Matched MeSH terms: Fermentation
  6. Bioconversion of agro-industry sourced biowaste into biomaterials via microbial factories - A viable domain of circular economy
    Kee SH, Chiongson JBV, Saludes JP, Vigneswari S, Ramakrishna S, Bhubalan K
    Environ Pollut, 2021 Feb 15;271:116311.
    PMID: 33383425 DOI: 10.1016/j.envpol.2020.116311
    Global increase in demand for food supply has resulted in surplus generation of wastes. What was once considered wastes, has now become a resource. Studies were carried out on the conversion of biowastes into wealth using methods such as extraction, incineration and microbial intervention. Agro-industry biowastes are promising sources of carbon for microbial fermentation to be transformed into value-added products. In the era of circular economy, the goal is to establish an economic system which aims to eliminate waste and ensure continual use of resources in a close-loop cycle. Biowaste collection is technically and economically practicable, hence it serves as a renewable carbon feedstock. Biowastes are commonly biotransformed into value-added materials such as bioethanol, bioplastics, biofuels, biohydrogen, biobutanol and biogas. This review reveals the recent developments on microbial transformation of biowastes into biotechnologically important products. This approach addresses measures taken globally to valorize waste to achieve low carbon economy. The sustainable use of these renewable resources is a positive approach towards waste management and promoting circular economy.
    Matched MeSH terms: Fermentation
  7. A review on the potential of polyhydroxyalkanoates production from oil-based substrates
    Chien Bong CP, Alam MNHZ, Samsudin SA, Jamaluddin J, Adrus N, Mohd Yusof AH, et al.
    J Environ Manage, 2021 Nov 15;298:113461.
    PMID: 34435568 DOI: 10.1016/j.jenvman.2021.113461
    Polyhydroxyalkanoate (PHA) is a type of polyesters produced in the form of accumulated intracellular granules by many microorganisms. It is viewed as an environmentally friendly bioproduct due to its biodegradability and biocompatibility. The production of the PHA using oil substrates such as waste oil and plant oil, has gained considerable attention due to the high product yield and lower substrate cost. Nevertheless, the PHA fermentation using oil substrate is complicated due to the heterogenous fatty acid composition, varied bio-accessibility and possible inhibitory effect on the bacterial culture. This review presents the current state-of-the-art of PHA production from oil-based substrates. This paper firstly discusses the technical details, such as the choice of bacteria strain and fermentation conditions, characteristic of the oil substrate as well as the PHA composition and application. Finally, the paper discusses the challenges and prospects for up-scaling towards a cleaner and effective bioprocess. From the literature review, depending on the cell culture and the type of PHA produced, the oil platform can have a PHA yield of 0.2-0.8 g PHA/g oil substrate, with PHA content mostly from 40 to 90% of the cell dry weight. There is an on-going search for more effective oil-utilising PHA producers and lower cost substrate for effective PHA production. The final application of the PHA polymer influences the treatment needed during downstream processing and its economic performance. PHA with different compositions exhibits varied decomposition behaviour under different conditions, requiring further insight towards its management towards a sustainable circular economy.
    Matched MeSH terms: Fermentation
  8. Fulltext Phytochemicals and antioxidant properties of different parts of Camellia sinensis leaves from Sabah Tea Plantation in Sabah, Malaysia
    Nor Qhairul Izzreen, M.N., Mohd Fadzelly, A.B.
    International Food Research Journal, 2013;20(1):307-312.
    MyJurnal
    This study was conducted to determine the total phenolic (TPC) and total flavonoid content (TFC) as well as the antioxidant activity of 50% ethanolic extracts from different parts of Camellia sinensis (shoot, young and matured leaves). Comparison was also made between black (fermented) and green (unfermented) tea. For green tea, the results showed that the shoot contained significantly higher total phenolic content, followed by the young and matured leaves (p
    Matched MeSH terms: Fermentation
  9. Fulltext The effects of cooking on oxalate content in Malaysian soy-based dishes: Comparisons with raw soy products
    Ghazaleh Shimi, Hasnah Haron
    International Food Research Journal, 2014;21(5):2019-2024.
    MyJurnal
    The advantage of cooking cannot be summarized just as the better food digestion. Some investigations showed the effect of cooking on reduction of food anti-nutrients such as oxalate. This study was aimed to determine the effect of cooking on oxalate content and its negative effects on calcium availability in eight Malaysian soy-based dishes. Since there is few data which examined the effects of cooking on food oxalate content globally, thus this study was designed as the first in Malaysia. Oxalate in this research was analyzed by using enzymatic methods, while calcium content was determined by using Atomic Absorption Spectrophotometer. The oxalate concentration was in the range of 6.43-19.40 mg/100 g for whole cooked samples, 9.03-11.90 mg/100 g for raw soy products, and 4.36-7.99 mg/100 g for cooked ones. There were 5 out of 12 samples containing oxalate, which was significantly lower (p < 0.05) in cooked products compared to the raw ones. The rest of the samples were also lower in oxalate but not significantly different (p > 0.05). Oxalate in raw/cooked fermented soy products (tempeh) was slightly lower compared to the non-fermented ones. However, there was no significant difference (p > 0.05) in oxalate amount between fermented and non-fermented soy products. As Oxalate/Calcium ratio was below 1, oxalate did not have an effect on availability of calcium in the studied samples. Optimal cooking and food processing might be effective in reducing oxalate content in soy products. There is a need for more investigations about the effect of cooking on soy products to confirm the present results.
    Matched MeSH terms: Fermentation
  10. Fulltext Screening of significant media components for production of bioprotein from coconut dregs using statistical approach
    Hafiza, S., Ahmad Anas, N.G., Nor Hidayah, B.
    International Food Research Journal, 2012;19(2):499-502.
    MyJurnal
    The production of bioprotein by coconut dregs is found to be a novel and cheaper carbon source.
    Media optimization for bioprotein production from coconut dregs through solid state fermentation has been developed as a one of the approaches to increase the protein production. The utilization of these coconut dregs provides as alternative substrates and also helps in solving waste disposal problems. Among the seven media components, only NH4NO3, MgSO4.7H2O and CuSO4.5H2O were found to be significantly affecting the bioprotein production.
    Matched MeSH terms: Fermentation
  11. Fulltext Effects of different fermentation approaches on the microbiological and physicochemical changes during cocoa bean fermentation
    Ganeswari, I., Khairul Bariah, S., Amizi, M.A., Sim, K.Y.
    International Food Research Journal, 2015;22(1):70-76.
    MyJurnal
    The influence of different fermentation methods and turning of cocoa beans on the cocoa bean’s quality was studied. Both shallow box covered with banana leaves (SBBL) and shallow box without banana leaves (SBWL) were used throughout fermentation (120 hours). The initial microbial load for SBBL and SBWL was 5.35±0.18 and 5.19±0.21 log CFU/g before increased to 6.27±0.08 and 6.17±0.03 log CFU/g, respectively at the end of fermentation (120 hours). The titratable acidity of the cocoa beans increased steadily until 72 hours before decreased slightly to 1.34±0.07 (SBBL) and 0.75±0.15 (SBWL) at the latter stage of fermentation. The cocoa beans fermented under SBBL were less acidic than those found in SBWL. Turned cocoa beans produced better quality of cocoa with less acidic compared to the one without turning. Cocoa beans with periodical turning recorded higher percentage of brown beans for both SBBL (73%) and SBWL (69%); percentage of purple beans decreased to about 7-8% for cocoa fermented in respective methods mentioned above. No slaty beans were recorded throughout the study. This study suggests that the use of shallow box with banana leaves can produce cocoa beans with superior quality.
    Matched MeSH terms: Fermentation
  12. Fulltext Ganoderma Boninense efficacy in delignifying Oil Palm empty fruit bunches
    Siti Sarah Jumali, Shaleha Ismail
    Pertanika Journal of Science & Technology, 2017;25(103):1-8.
    MyJurnal
    Oil palm empty fruit bunches (EFB) were subjected to microbial pre-treatment of lignocellulosic biomass bioconversion to fermentable sugar. Microbial pre-treatment was carried out by inoculating Ganoderma boninense spores through solid state fermentation. The samples were initially treated with Sulphuric acid method prior to reading with UV-Visible Spectrometer. The readings were taken before and after inoculation of EFB with G. boninense. Bioconversion of 20 g EFB via solid state fermentation was done in five different amounts of G. boninense spore namely 0.0 g (control), 0.5 g (T2), 0.7 g (T3), 0.9 g (T4) and 1.1 g (T5) in 7 days. The result shows the highest delignification in sample inoculated with 1.1g of G. boninense spores, in which the spores are successfully reduced by 61.97% of lignin from total EFB biomass in 7 days compared to 60.08% (T4), 58.65% (T3) and 54.85% (T2). Meanwhile, for control the lignin content was reduced by 5.07% in 7 days. The study shows that G. boninense has the ability to remove lignin from EFB whereby longer incubation period and higher number of spores contribute to higher delignification percentage.
    Matched MeSH terms: Fermentation
  13. Fulltext Fermentation of Morinda citrifolia extract by Saccharomyces cerevisiae as affected by substrate concentration, inoculum size, temperature and fermentation time
    Nur Hafiza, Z., Maskat, M.Y., Liew, S.L., Mamot, S.
    International Food Research Journal, 2013;20(4):1889-1894.
    MyJurnal
    A study was carried out to observe the fermentation process for noni (Morinda citrifolia L.) extract by Saccharomyces cerevisiae. The experiment was based on a central composite rotatable design (CCRD) employing 5 center points with augmented axial and factorial points resulting in 30 runs. The M. citrifolia extract was fermented with different combination of substrate concentration (40, 50, 60, 70 and 80%) (w/v), inoculum size (0, 1.5, 3, 4.5 and 6%) (v/v), temperature (30, 33.5, 37, 40.5 and 44oC) and fermentation time (0, 1.5, 3, 4.5 and 6 days). Five physico-chemical characteristics which include pH, titratable acidity, turbidity, total soluble solids and total polyphenol content were measured. Results showed that all the responses could be well represented using statistical models. For pH, only fermentation time was found to be not significant, while for titratable acidity and total polyphenol content, the effects of substrate concentration and fermentation time were significant. The effects of inoculum size and temperature level were found to be significant for turbidity. For total soluble solids, only the effect of substrate concentration and inoculum size were found to be significant.
    Matched MeSH terms: Fermentation
  14. Raw oil palm frond leaves as cost-effective substrate for cellulase and xylanase productions by Trichoderma asperellum UC1 under solid-state fermentation
    Ezeilo UR, Lee CT, Huyop F, Zakaria II, Wahab RA
    J Environ Manage, 2019 Aug 01;243:206-217.
    PMID: 31096173 DOI: 10.1016/j.jenvman.2019.04.113
    Production of cellulases and xylanase by a novel Trichoderma asperellum UC1 (GenBank accession no. MF774876) under solid state fermentation (SSF) of raw oil palm frond leaves (OPFL) was optimized. Under optimum fermentation parameters (30 °C, 60-80% moisture content, 2.5 × 106 spores/g inoculum size) maximum CMCase, FPase, β-glucosidase and xylanase activity were recorded at 136.16 IU/g, 26.03 U/g, 130.09 IU/g and 255.01 U/g, respectively. Cellulases and xylanase were produced between a broad pH range of pH 6.0-12.0. The enzyme complex that comprised of four endo-β-1,4-xylanases and endoglucanases, alongside exoglucanase and β-glucosidase showed thermophilic and acidophilic characteristics at 50-60 °C and pH 3.0-4.0, respectively. Glucose (16.87 mg/g) and fructose (18.09 mg/g) were among the dominant sugar products from the in situ hydrolysis of OPFL, aside from cellobiose (105.92 mg/g) and xylose (1.08 mg/g). Thermal and pH stability tests revealed that enzymes CMCase, FPase, β-glucosidase and xylanase retained 50% residual activities for up to 15.18, 4.06, 17.47 and 15.16 h of incubation at 60 °C, as well as 64.59, 25.14, 68.59 and 19.20 h at pH 4.0, respectively. Based on the findings, it appeared that the unique polymeric structure of raw OPFL favored cellulases and xylanase productions.
    Matched MeSH terms: Fermentation
  15. Production of Acetone-Butanol-Ethanol and Hydrogen of Palm Oil Mill Effluent Anaerobic Fermentation with Clostridium Acetobutylicum NCIMB 13357
    Pang WK, Wan Mohtar Wan Yusoff, Mohd Sahaid Kalil, Osman Hassan
    Sains Malaysiana, 2004;33.
    Palm oil mill effluent (POME) can be utilised directly as the sole substrate in the anaerobic fermentation of acetone-butanol-ethanol (ABE) and hydrogen by Clostridium acetobutylicum NClMB13357 in a submerged batch system. Effects of sedimented POME concentration and the initial culture pH on the production of ABE/H were studied. Sedimented POME with 90% v/v (POME90) at pH 5.8 is capable of producing 4.01 g/L ABE with acetone concentration at 1.97 g/L; butanol 1.74 g/L and ethanol 0.3 g/L. The highest concentration of butanol (1.86 g/L) was produced from a culture with initial pH 6.0. The production of hydrogen gas was proportioned to the concentration of POME. The highest hydrogen gas production was at pH 5.5 (31 mL). More than 50% (v/v) of hydrogen gas was produced at different pH except pH 4.5, when only 16% (v/v) or 5 mL of hydrogen was produced.
    Matched MeSH terms: Fermentation
  16. Bioflocculant production using palm oil mill and sago mill effluent as a fermentation feedstock: Characterization and mechanism of flocculation
    Hassimi AH, Ezril Hafiz R, Muhamad MH, Sheikh Abdullah SR
    J Environ Manage, 2020 Apr 15;260:110046.
    PMID: 32090804 DOI: 10.1016/j.jenvman.2019.110046
    This study was conducted to examine the production of bioflocculants using agricultural wastewater as a fermentation feedstock under different temperatures and incubation times. The mechanism of flocculation was studied to gain a detailed understanding of the flocculation activity. The highest bioflocculant yield (2.03 g/L) at a temperature of 40 °C was produced in a palm oil mill effluent medium (BioF-POME). Bioflocculant produced from a fermented SME medium (BioF-SME) showed the highest activity. The flocculation tests for colour and turbidity removal from lake water indicated that BioF-SME and BioF-POME performed comparably to commercial alum. Analyses of the bioflocculants using liquid chromatography-mass spectrometry (LC-MS) found that the bioflocculants contained xylose and glucose. The mechanism study showed that flocculation occurred through charge neutralization and interparticle bridging between the bioflocculant polymer and the particles in the lake water. Thus, agricultural wastewater can be used as a fermentation feedstock for high-quality bioflocculants.
    Matched MeSH terms: Fermentation
  17. Microwave assisted acid hydrolysis for bioethanol fuel production from sago pith waste
    Thangavelu SK, Rajkumar T, Pandi DK, Ahmed AS, Ani FN
    Waste Manag, 2019 Mar 01;86:80-86.
    PMID: 30902242 DOI: 10.1016/j.wasman.2019.01.035
    Microwave assisted acid hydrolysis (H2SO4 and HCl with >0.5 mol/L) to produce bioethanol from sago pith waste (SPW) was studied. The energy consumption for microwave hydrolysis at different energy inputs and acid concentration were calculated. The overall energy consumption for bioethanol fuel production from SPW was assessed. A maximum of 88% glucose yield and 80% ethanol yield (3.1 g ethanol per 10 g SPW) were obtained using 1.0 mol/L H2SO4. Microwave hydrolysis using 1.0 mol/L H2SO4 consumed the minimum energy of 8.1 kJ to produce 1 g glucose from SPW when energy input was fixed at 54 kJ (900 W for 1 min). In general, 1 g glucose can produce 16 kJ. The overall energy consumption for fuel grade bioethanol production from SPW was 31.77 kJ per g ethanol, which was slightly higher than the lower heating values of ethanol (26.74 kJ/g ethanol).
    Matched MeSH terms: Fermentation
  18. Impacts of cocoa pod maturity at harvest and bean fermentation period on the production of chocolate with potential health benefits
    Tee YK, Bariah K, Hisyam Zainudin B, Samuel Yap KC, Ong NG
    J Sci Food Agric, 2022 Mar 15;102(4):1576-1585.
    PMID: 34405409 DOI: 10.1002/jsfa.11494
    BACKGROUND: Cacao beans are rich sources of polyphenols with an abundance of flavonoids and methylxanthines that have positive influences on human health. The main factors affecting the formation of flavor as well as the chemical and bioactive composition of cacao beans are cacao pod maturity and post-harvest fermentation. The purpose of this research was to evaluate the effects of pod harvest maturity (mature and ripe) and post-fermentation period (1, 3, and 5 days in a controlled temperature environment) measured by pre-harvest maturity indices, post-harvest quality tests, chemical measurements, and organoleptic evaluation.

    RESULTS: As pods developed, flavonol accumulated while nitrogen content degraded. Mature pods produced beans with a higher flavonol, catechin, and total phenolic content (TPC). As fermentation progressed, the beans' fat, TPC, antioxidant activity, and catechin content increased, regardless of pod maturity at harvest. Free fatty acid (FFA) levels were highest in 5 day fermented beans. The 3 day fermented beans contained significantly higher epicatechin, with lower FFA content. Chocolate made from mature beans with 3 day fermentation was more pleasant as it scored the highest in flavor intensity and complexity and the lowest in acidity and astringency.

    CONCLUSION: This study suggests that cacao pods harvested at the mature stage with further fermentation for 3 days under controlled temperatures produce specialty beans with potential health benefits. © 2021 Society of Chemical Industry.

    Matched MeSH terms: Fermentation
  19. Advances in solid-state fermentation for bioconversion of agricultural wastes to value-added products: Opportunities and challenges
    Chilakamarry CR, Mimi Sakinah AM, Zularisam AW, Sirohi R, Khilji IA, Ahmad N, et al.
    Bioresour Technol, 2022 Jan;343:126065.
    PMID: 34624472 DOI: 10.1016/j.biortech.2021.126065
    The increase in solid waste has become a common problem and causes environmental pollution worldwide. A green approach to valorise solid waste for sustainable development is required. Agricultural residues are considered suitable for conversion into profitable products through solid-state fermentation (SSF). Agricultural wastes have high organic content that is used as potential substrates to produce value-added products through SSF. The importance of process variables used in solid-phase fermentation is described. The applications of SSF developed products in the food industry as flavouring agents, acidifiers, preservatives and flavour enhancers. SSF produces secondary metabolites and essential enzymes. Wastes from agricultural residues are used as bioremediation agents, biofuels and biocontrol agents through microbial processing. In this review paper, the value addition of agricultural wastes by SSF through green processing is discussed with the current knowledge on the scenarios, sustainability opportunities and future directions of a circular economy for solid waste utilisation.
    Matched MeSH terms: Fermentation
  20. A comprehensive review on two-stage integrative schemes for the valorization of dark fermentative effluents
    Sivagurunathan P, Kuppam C, Mudhoo A, Saratale GD, Kadier A, Zhen G, et al.
    Crit Rev Biotechnol, 2018 Sep;38(6):868-882.
    PMID: 29264932 DOI: 10.1080/07388551.2017.1416578
    This review provides the alternative routes towards the valorization of dark H2 fermentation effluents that are mainly rich in volatile fatty acids such as acetate and butyrate. Various enhancement and alternative routes such as photo fermentation, anaerobic digestion, utilization of microbial electrochemical systems, and algal system towards the generation of bioenergy and electricity and also for efficient organic matter utilization are highlighted. What is more, various integration schemes and two-stage fermentation for the possible scale up are reviewed. Moreover, recent progress for enhanced performance towards waste stabilization and overall utilization of useful and higher COD present in the organic source into value-added products are extensively discussed.
    Matched MeSH terms: Fermentation
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links