Displaying publications 21 - 40 of 49 in total

Abstract:
Sort:
  1. Fulltext Impact of organic and inorganic fertilizers application on the phytochemical and antioxidant activity of Kacip Fatimah (Labisia pumila Benth)
    Ibrahim MH, Jaafar HZ, Karimi E, Ghasemzadeh A
    Molecules, 2013 Sep 05;18(9):10973-88.
    PMID: 24013410 DOI: 10.3390/molecules180910973
    A study was conducted to compare secondary metabolites and antioxidant activity of Labisia pumila Benth (Kacip Fatimah) in response to two sources of fertilizer [i.e., organic (chicken dung; 10% N:10% P₂O₅:10% K₂O) and inorganic fertilizer (NPK green; 15% N, 15% P₂O₅, 15% K₂O)] under different N rates of 0, 90, 180 and 270 kg N/ha. The experiment was arranged in a randomized complete block design replicated three times. At the end of 15 weeks, it was observed that the application of organic fertilizer enhanced the production of total phenolics, flavonoids, ascorbic acid, saponin and gluthathione content in L. pumila, compared to the use of inorganic fertilizer. The nitrate content was also reduced under organic fertilization. The application of nitrogen at 90 kg N/ha improved the production of secondary metabolites in Labisia pumila. Higher rates in excess of 90 kg N/ha reduced the level of secondary metabolites and antioxidant activity of this herb. The DPPH and FRAP activity was also highest at 90 kg N/ha. The results indicated that the use of chicken dung can enhance the production of secondary metabolites and improve antioxidant activity of this herb.
  2. Fulltext Impact of soil field water capacity on secondary metabolites, phenylalanine ammonia-lyase (PAL), maliondialdehyde (MDA) and photosynthetic responses of Malaysian kacip fatimah (Labisia pumila Benth)
    Jaafar HZ, Ibrahim MH, Mohamad Fakri NF
    Molecules, 2012 Jun 13;17(6):7305-22.
    PMID: 22695235 DOI: 10.3390/molecules17067305
    A randomized complete block design 2 × 4 experiment was designed and conducted for 15 weeks to characterize the relationships between production of total phenolics, flavonoid, anthocyanin, leaf gas exchange, total chlorophyll, phenylalanine ammonia-lyase (PAL) and malondialdehyde (MDA) activity in two varieties of Labisia pumila Benth, namely the var. alata and pumila, under four levels of evapotranspiration replacement (ER) (100%; well watered), (75%, moderate water stress), (50%; high water stress) and (25%; severe water stress). The production of total phenolics, flavonoids, anthocyanin, soluble sugar and relative leaf water content was affected by the interaction between varieties and SWC. As the ER levels decreased from 100% to 25%, the production of PAL and MDA activity increased steadily. At the highest (100%) ER L. pumila exhibited significantly higher net photosynthesis, apparent quantum yield, maximum efficiency of photosystem II (f(v)/f(m)) and lower dark respiration rates compared to the other treatment. The production of total phenolics, flavonoids and anthocyanin was also found to be higher under high water stress (50% ER replacement) compared to severe water stress (25% ER). From this study, it was observed that as net photosynthesis, apparent quantum yield and chlorophyll content were downregulated under high water stress the production of total phenolics, flavonoids and anthocyanin were upregulated implying that the imposition of high water stress can enhance the medicinal properties of L. pumila Benth.
  3. Fulltext Effect of Cadmium and Copper Exposure on Growth, Secondary Metabolites and Antioxidant Activity in the Medicinal Plant Sambung Nyawa (Gynura procumbens (Lour.) Merr)
    Ibrahim MH, Chee Kong Y, Mohd Zain NA
    Molecules, 2017 Oct 12;22(10).
    PMID: 29023367 DOI: 10.3390/molecules22101623
    A randomized complete block (RCBD) study was designed to investigate the effects of cadmium (Cd) and copper (Cu) on the growth, bioaccumulation of the two heavy metals, metabolite content and antibacterial activities in Gyanura procumbens (Lour.) Merr. Nine treatments including (1) control (no Cd and Cu); (2) Cd 2 = cadmium 2 mg/L; (3) Cd 4 = cadmium 4 mg/L; (4) Cu 70 = copper 70 mg/L; (5) Cu 140 = copper 140 mg/L); (6) Cd 2 + Cu 70 = cadmium 2 mg/L + copper 70 mg/L); (7) Cd 2 + Cu 140 = cadmium 2 mg/L + copper 70 mg/L); (8) Cd 4 + Cu 70 = cadmium 4 mg/L+ copper 70 mg/L and (9) Cd 4 + Cu 140 = cadmium 4 mg/L + copper 140 mg/L) were evaluated in this experiment. It was found that the growth parameters (plant dry weight, total leaf area and basal diameter) were reduced with the exposure to increased concentrations of Cd and Cu and further decreased under interaction between Cd and Cu. Production of total phenolics, flavonoids and saponin was observed to be reduced under combined Cd and Cu treatment. The reduction in the production of plant secondary metabolites might be due to lower phenyl alanine lyase (PAL) activity under these conditions. Due to that, the 1,1-diphenyl-2-picrylhydrazyl (DPPH), ferric reducing antioxidant potential (FRAP) and antibacterial activities was also found to be reduced by the combined treatments. The current experiments show that the medicinal properties of G. procumbens are reduced by cadmium and copper contamination. The accumulation of heavy metal also was found to be higher than the safety level recommended by the WHO in the single and combined treatments of Cd and Cu. These results indicate that exposure of G. procumbens to Cd and Cu contaminated soil may potentially harm consumers due to bioaccumulation of metals and reduced efficacy of the herbal product.
  4. Fulltext Combined effect of CO(2) enrichment and foliar application of salicylic acid on the production and antioxidant activities of anthocyanin, flavonoids and isoflavonoids from ginger
    Ghasemzadeh A, Jaafar HZ, Karimi E, Ibrahim MH
    BMC Complement Altern Med, 2012 Nov 23;12:229.
    PMID: 23176249 DOI: 10.1186/1472-6882-12-229
    BACKGROUND: The increase in atmospheric CO(2) concentration caused by climate change and agricultural practices is likely to affect biota by producing changes in plant growth, allocation and chemical composition. This study was conducted to evaluate the combined effect of the application of salicylic acid (SA, at two levels: 0 and 10-3 M) and CO(2) enrichment (at two levels: 400 and 800 μmol·mol-1) on the production and antioxidant activities of anthocyanin, flavonoids and isoflavonoids from two Malaysian ginger varieties, namely Halia Bentong and Halia Bara.

    METHODS: High-performance liquid chromatography (HPLC) with photodiode array detection and mass spectrometry was employed to identify and quantify the flavonoids and anthocyanins in the ginger extracts. The antioxidant activity of the leaf extracts was determined by the 1,1-diphenyl-2-picrylhydrazyl (DPPH) and thiobarbituric acid (TBA) assays. The substrate specificity of chalcone synthase, the key enzyme for flavonoid biosynthesis, was investigated using the chalcone synthase (CHS) assay.

    RESULTS: CO(2) levels of 800 μmol·mol-1 significantly increased anthocyanin, rutin, naringenin, myricetin, apigenin, fisetin and morin contents in ginger leaves. Meanwhile, the combined effect of SA and CO(2) enrichment enhanced anthocyanin and flavonoid production compared with single treatment effects. High anthocyanin content was observed in H Bara leaves treated with elevated CO(2) and SA. The highest chalcone synthase (CHS) activity was observed in plants treated with SA and CO(2) enrichment. Plants not treated with SA and kept under ambient CO(2) conditions showed the lowest CHS activity. The highest free radical scavenging activity corresponded to H Bara treated with SA under high CO(2) conditions, while the lowest activity corresponded to H Bentong without SA treatment and under atmospheric CO(2) levels. As the level of CO(2) increased, the DPPH activity increased. Higher TBA activity was also recorded in the extracts of H Bara treated with SA and grown under high CO(2) conditions.

    CONCLUSIONS: The biological activities of both ginger varieties were enhanced when the plants were treated with SA and grown under elevated CO(2) concentration. The increase in the production of anthocyanin and flavonoids in plants treated with SA could be attributed to the increase in CHS activity under high CO(2) levels.

  5. Fulltext Impact of seasonality and forest stand age on ion deposition in rehabilitated forests
    Ibrahim MH, Jaafar S, Yamashita N, Sase H
    Plant Environ Interact, 2024 Aug;5(4):e70005.
    PMID: 39165798 DOI: 10.1002/pei3.70005
    This study examines the critical interaction between seasonal precipitation variability and forest maturity in determining ion deposition patterns in rehabilitated forest ecosystems. This research was conducted in rehabilitated forest sites in Bintulu, Sarawak, Malaysia that had ecologically similar plant distribution, species, and age in each planting area. This facilitated the standardization of rainfall deposition in the different study plots which streamlined the study of these specific facets of ecosystem dynamics. The goal is to understand how seasonal changes and the age of the forest influence the chemical composition of the flux that relates to the movement and deposition of nutrients through the forest ecosystem. This flux is a key factor in the health of the forest ecosystem and nutrient cycling. Using ion exchange resin (IER) samplers, we accurately measured and compared the deposition of different ions (Ca2+, Na+, Fe2+, Cu2+, NO3 -, NH4 + and SO4 2-) across different seasons and forest ages. The deposition of Ca2+ and NH₄+ was significantly lower in the low-precipitation season than in the high-precipitation season in all forest stands, regardless of the year they were established (1996, 1999, 2002, 2005, and 2009). In contrast, ions such as Na+, Fe2+, Cu2+, NO3 - and SO4 2- showed no clear seasonal fluctuations. In addition, the study shows that through-fall in forest stands from 2002, 2005 and 2009 had higher concentrations of Ca2+ in both seasons than in 1996 and 1999. Interestingly, forest stands from 2009 and 2002 had elevated levels of Na+ and SO₄2- in seasons with low precipitation, while stands from 1996 had higher levels in seasons with high precipitation. Our results emphasize the crucial role of precipitation amount and canopy age in determining ion deposition in forest ecosystems. By demonstrating the significant influence of precipitation seasonality and forest maturity on the chemical composition of throughfall, this study contributes to a deeper understanding of nutrient dynamics in developing forest landscapes and provides valuable insights for ecological restoration measures.
  6. Chitosan hydrogel beads impregnated with hexadecylamine for improved reactive blue 4 adsorption
    Vakili M, Rafatullah M, Ibrahim MH, Abdullah AZ, Salamatinia B, Gholami Z
    Carbohydr Polym, 2016 Feb 10;137:139-146.
    PMID: 26686114 DOI: 10.1016/j.carbpol.2015.09.017
    Adsorption performance of chitosan (CS) hydrogel beads was investigated after impregnation of CS with hexadecylamine (HDA) as a cationic surfactant, for the elimination of reactive blue 4 (RB4) from wastewater. The CS/HDA beads formed with 3.8% HDA were the most effective adsorbent. The adsorption capacity was increased by 1.43 times from 317 mg/g (CS) to 454 mg/g (CS/HDA). The RB4 removal increased with decrease in the pH of dye solution from 4 to 9. The isotherm data obtained from RB4 adsorption on CS and CS/HDA are adequately described by Freundlich model (R(2)=0.946 and 0.934, χ(2)=22.414 and 64.761). The kinetic study revealed that the pseudo-second-order rate model (R(2)=0.996 and 0.997) was in better agreement with the experimental data. The negative values of ΔG° (-2.28 and -6.30 kJ/mol) and ΔH° (-172.18 and -101.62 kJ/mol) for CS beads and HDA modified CS beads, respectively; suggested a spontaneous and exothermic process for RB4 adsorption.
  7. Application of chitosan and its derivatives as adsorbents for dye removal from water and wastewater: a review
    Vakili M, Rafatullah M, Salamatinia B, Abdullah AZ, Ibrahim MH, Tan KB, et al.
    Carbohydr Polym, 2014 Nov 26;113:115-30.
    PMID: 25256466 DOI: 10.1016/j.carbpol.2014.07.007
    Chitosan based adsorbents have received a lot of attention for adsorption of dyes. Various modifications of this polysaccharide have been investigated to improve the adsorption properties as well as mechanical and physical characteristics of chitosan. This review paper discusses major research topics related to chitosan and its derivatives for application in the removal of dyes from water. Modification of chitosan changes the original properties of this material so that it can be more suitable for adsorption of different types of dye. Many chitosan derivatives have been obtained through chemical and physical modifications of raw chitosan that include cross-linking, grafting and impregnation of the chitosan backbone. Better understanding of these varieties and their affinity toward different types of dye can help future research to be properly oriented to address knowledge gaps in this area. This review provides better opportunity for researchers to better explore the potential of chitosan-derived adsorbents for removal of a great variety of dyes.
  8. Oil palm biomass as an adsorbent for heavy metals
    Vakili M, Rafatullah M, Ibrahim MH, Abdullah AZ, Salamatinia B, Gholami Z
    Rev Environ Contam Toxicol, 2014;232:61-88.
    PMID: 24984835 DOI: 10.1007/978-3-319-06746-9_3
    Many industries discharge untreated wastewater into the environment. Heavy metals from many industrial processes end up as hazardous pollutants of wastewaters.Heavy metal pollution has increased in recent decades and there is a growing concern for the public health risk they may pose. To remove heavy metal ions from polluted waste streams, adsorption processes are among the most common and effective treatment methods. The adsorbents that are used to remove heavy metal ions from aqueous media have both advantages and disadvantages. Cost and effectiveness are two of the most prominent criteria for choosing adsorbents. Because cost is so important, great effort has been extended to study and find effective lower cost adsorbents.One class of adsorbents that is gaining considerable attention is agricultural wastes. Among many alternatives, palm oil biomasses have shown promise as effective adsorbents for removing heavy metals from wastewater. The palm oil industry has rapidly expanded in recent years, and a large amount of palm oil biomass is available. This biomass is a low-cost agricultural waste that exhibits, either in its raw form or after being processed, the potential for eliminating heavy metal ions from wastewater. In this article, we provide background information on oil palm biomass and describe studies that indicate its potential as an alternative adsorbent for removing heavy metal ions from wastewater. From having reviewed the cogent literature on this topic we are encouraged that low-cost oil-palm-related adsorbents have already demonstrated outstanding removal capabilities for various pollutants.Because cost is so important to those who choose to clean waste streams by using adsorbents, the use of cheap sources of unconventional adsorbents is increasingly being investigated. An adsorbent is considered to be inexpensive when it is readily available, is environmentally friendly, is cost-effective and be effectively used in economical processes. The advantages that oil palm biomass has includes the following:available and exists in abundance, appears to be effective technically, and can be integrated into existing processes. Despite these advantages, oil palm biomasses have disadvantages such as low adsorption capacity, increased COD, BOD and TOC. These disadvantages can be overcome by modifying the biomass either chemically or thermally. Such modification creates a charged surface and increases the heavy metal ion binding capacity of the adsorbent.
  9. Fulltext Alleviation of water stress effects on MR220 rice by application of periodical water stress and potassium fertilization
    Zain NA, Ismail MR, Mahmood M, Puteh A, Ibrahim MH
    Molecules, 2014;19(2):1795-819.
    PMID: 24504074 DOI: 10.3390/molecules19021795
    The use of periodical water stress and potassium fertilization may enhance rice tolerance to drought stress and improve the crop's instantaneous water use efficiency without much yield reduction. This study was conducted to assess the effects of different periodical water stress combined with potassium fertilization regimes on growth, yield, leaf gas exchanges and biochemical changes in rice grown in pots and compare them with standard local rice grower practices. Five treatments including (1) standard local grower's practice (control, 80CF = 80 kg K2O/ha + control flooding); (2) 120PW15 = 120 kg K2O/ha + periodical water stress for 15 days; (3) 120DS15V = 120 kg K2O/ha + drought stress for 15 days during the vegetative stage; (4) 120DS25V = 120 kg K2O/ha + drought stress for 25 days and (5) 120DS15R = 120 kg K2O/ha + drought stress for 15 days during the reproductive stage, were evaluated in this experiment. Control and 120PW15 treatments were stopped at 100 DAS, and continuously saturated conditions were applied until harvest. It was found that rice under 120PW15 treatment showed tolerance to drought stress evidenced by increased water use efficiency, peroxidase (POX), catalase (CAT) and proline levels, maximum efficiency of photosystem II (fv/fm) and lower minimal fluorescence (fo), compared to other treatments. Path coefficient analysis revealed that most of parameters contribute directly rather than indirectly to rice yield. In this experiment, there were four factors that are directly involved with rice yield: grain soluble sugar, photosynthesis, water use efficiency and total chlorophyll content. The residual factors affecting rice yield are observed to be quite low in the experiment (0.350), confirming that rice yield was mostly influenced by the parameters measured during the study.
  10. Chemical composition and antioxidant properties of candlenut oil extracted by supercritical CO2
    Siddique BM, Ahmad A, Alkarkhi AF, Ibrahim MH, K MO
    J Food Sci, 2011 May;76(4):C535-42.
    PMID: 22417332 DOI: 10.1111/j.1750-3841.2011.02146.x
    Candlenut oil was extracted using supercritical CO(2) (SC-CO(2)) with an optimization of parameters, by the response surface methodology. The ground candlenut samples were treated in 2 different ways, that is, dried in either a heat oven (sample moisture content of 2.91%) or dried in a vacuum oven (sample moisture content of 1.98%), before extraction. An untreated sample (moisture content of 4.87%) was used as a control. The maximum percentage of oil was extracted from the heat-oven-dried sample (77.27%), followed by the vacuum-oven-dried sample (74.32%), and the untreated sample (70.12%). At an SC-CO(2) pressure of 48.26 Mpa and 60 min of extraction time, the optimal temperatures for extraction were found to be 76.4 °C, 73.9 °C, and 70.6 °C for the untreated, heat-oven-dried, and vacuum-oven-dried samples, respectively. The heat-oven-dried sample contains the highest percentage of linoleic acid, followed by the untreated and vacuum-oven-dried samples. The antiradical activity of candlenut oil corresponded to an IC(50) value of 30.37 mg/mL.
  11. Fulltext Evaluation of methylene diphenyl diisocyanate as an indoor air pollutant and biological assessment of methylene dianiline in the polyurethane factories
    Mirmohammadi M, Ibrahim MH, Ahmad A, Kadir MO, Mohammadyan M, Mirashrafi SB
    Indian J Occup Environ Med, 2009 Apr;13(1):38-42.
    PMID: 20165612 DOI: 10.4103/0019-5278.50723
    Today many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them, which is widely used in the polyurethane factories, is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Methylene dianiline (MDA) is a metabolite of methylene diphenyle diisocyanate (MDI), an excretory material of worker's urine who are exposed to MDI. Around 100 air samples were collected among five factories by the Midget Impinger, which contained DMSO absorbent as a solvent and Tryptamine as a reagent. Samples were analyzed by high-performance liquid chromatography with an EC\UV detector using the NIOSH 5522 method of sampling and analysis. Also, fifty urine samples were collected from workers by using William's biological analysis method. The concentration of MDI in all air samples was more than 88 mug/m(3), showing a high concentration of the pollutant in the workplaces in comparison with the NIOSH standard, and all the worker's urine was contaminated by MDA. The correlation and regression tests were used to obtain statistical model for MDI and MDA that is useful for prediction of diisocyanates pollution situation in the polyurethane factories.
  12. Biocontrol efficacy of Trichoderma asperellum-enriched coconut fibre against Fusarium wilts of cherry tomato
    Hasan ZAE, Mohd Zainudin NAI, Aris A, Ibrahim MH, Yusof MT
    J Appl Microbiol, 2020 Oct;129(4):991-1003.
    PMID: 32324939 DOI: 10.1111/jam.14674
    AIMS: Agro-based wastes were evaluated as a medium for mass micropropagule production and optimal efficacy of Trichoderma asperellum B1092 in controlling Fusarium oxysporum f. sp. lycopersici and promoting tomato growth. This study focused on biological control because pathogen persistence in the soil makes the disease difficult to control.

    METHODS AND RESULTS: Rice bran, biochar, empty fruit bunches, coconut fibres, compost, top soil and mixed soil were evaluated as media for mass multiplication of T. asperellum, which is effective in controlling plant pathogens. Yielding the most colony forming units (CFU) among the media, coconut fibre was deemed most suitable for promoting sporulation. After 120 days on the medium, T. asperellum B1902 produced 9·053 × 105  CFU per gram coconut fibre; oil palm empty fruit bunches was second highest (7·406 × 105  CFU per gram). In field tests of T. asperellum B1092 against F. oxysporum f. sp lycopersici (causing Fusarium wilt of cherry tomato), B1092 significantly promoted plant growth compared to the control. The efficacy of this formulation resulted in increased growth of roots and shoots tomato plants and total lycopene, sugar, K, N, Ca, P and Mg content after 120 days.

    CONCLUSIONS: Trichoderma asperellum B1092 showed great field potential for improving productivity and quality of tomatoes and in controlling Fusarium wilt of cherry tomato.

    SIGNIFICANCE AND IMPACT OF THE STUDY: This innovative approach using a cheap agro-waste to control the persistent soil-borne Fusarium pathogen of cherry tomato should increase soil survival rate of Trichoderma and has potential for upscaling in the field for other crops.

  13. On the discrimination between facial creams of different brands using Raman Spectroscopy and partial least squares discriminant analysis for forensic application
    Asri MNM, Verma R, Ibrahim MH, Nor NAM, Sharma V, Ismail D
    Sci Justice, 2021 Nov;61(6):687-696.
    PMID: 34802642 DOI: 10.1016/j.scijus.2021.08.006
    Determining the origin of cosmetic traces is an important aspect of forensic investigations, that helps linking a suspect to a crime. Such type of evidence can help further narrow down the undergoing investigations. This paper reports the first use of Raman Spectroscopy (RS) coupled with the exploratory principal component analysis (PCA) and supervised partial least squares-discriminant analysis (PLS-DA) in facial creams. 40 facial cream samples of 8 different brands were studied in this work. Preliminary assessments through visual inspection of their Raman spectra revealed the presence of oxides, titanium dioxide, castor seed oil, and beeswax. Also, the peaks of alkyne groups were indicative of the presence of talc or mica compounds. The exploratory PCA correctly segregated the samples into 8 clusters and the supervised PLS-DA model correctly classified them into 8 classes. Further evaluation of the performance of the trained PLS-DA model resulted in perfect classification shown by the receiver operating characteristic (ROC) curves. The PLS-DA model also resulted in 100% accuracy of correctly assigning the brand on the face wipes on each of the five substrates viz. cotton, dry and wet tissue paper, nylon substrate, and polyester. This validation was done treating these samples as unknowns. The study has a potential for use under actual forensic casework conditions.
  14. Fulltext Bioremediation of palm industry wastes using vermicomposting technology: its environmental application as green fertilizer
    Rupani PF, Embrandiri A, Ibrahim MH, Shahadat M, Hansen SB, Mansor NNA
    3 Biotech, 2017 Jul;7(3):155.
    PMID: 28623493 DOI: 10.1007/s13205-017-0770-1
    Several technologies are being applied for treatment of palm oil mill wastes. Among them, the biological treatments (vermicomposting) have widely been recognized as one of the most efficient and eco-friendly methods for converting organic waste materials into valuable products. The present study focuses on vermicomposting of acidic palm oil mill effluent (POME) mixed with the palm pressed fibre (PPF) which are found difficult to decompose in the environment. The industrial waste (POME) was vermicomposted using Lumbricus rubellus under laboratory conditions for a period of 45 days. A significant improvement in nitrogen, phosphorus, and potassium content was monitored during vermicomposting process. In addition, the decline in C:N ratio of vermicompost (up to 17.20 ± 0.60) reflects the degree of stabilization of POME-PPF mixture. Different percentages of the vermicompost extract obtained from POME-PPF mixture were also examined for the germination of mung bean (Vigna radiata) seed. The results showed that 75% vermicompost extract demonstrated better performance for the seed germination. On the basis of significant findings, POME-PPF mixture can be successfully used as a feeding material for the earthworms, while on the other hand, it can also be used as a cost-effective fertilizer for the germination and the proper growth of mung bean.
  15. Recycling of palm oil industrial wastes using vermicomposting technology: its kinetics study and environmental application
    Rupani PF, Embrandiri A, Ibrahim MH, Shahadat M, Hansen SB, Ismail SA, et al.
    Environ Sci Pollut Res Int, 2017 May;24(14):12982-12990.
    PMID: 28378309 DOI: 10.1007/s11356-017-8938-0
    The present paper reports management of palm oil mill effluent (POME) mixed with palm-pressed fibre (PPF) POME-PPF mixture using eco-friendly, cost-effective vermicomposting technology. Vermicomposting of POME-PPF was performed to examine the optimal POME-PPF ratio with respect to the criteria of earthworm biomass and to evaluate the decomposition of carbon and nitrogen in different percentages of POME-PPF mixtures. Chemical parameters such as TOC, N, P and K contents were determined to achieve optimal decomposition of POME-PPF. On this basis, the obtained data of 50% POME-PPF mixture demonstrated more significant results throughout the experiment after addition of the earthworms. However, 60 and 70% mixtures found significant only in the last stages of the vermicomposting process. The decomposition rate in terms of -ln (CNt/CNo) showed that the 50% mixture has higher decomposition rate as compared to the 60 and 70% (k50% = 0.0498 day(-1)). The vermicomposting extracts (50, 60 and 70%) of POME-PPF mixtures were also tested to examine the growth of mung bean (Vigna radiata). It was found that among different extract dilutions, 50% POME-PPF vermicompost extract provided longer root and shoot length of mung bean. The present study concluded that the 50% mixture of POME-PPF could be chosen as the optimal mixture for vermicomposting in terms of both decomposition rate and fertilizer value of the final compost. Graphical abstract ᅟ.
  16. Effects of different vermicompost extracts of palm oil mill effluent and palm-pressed fiber mixture on seed germination of mung bean and its relative toxicity
    Rupani PF, Embrandiri A, Ibrahim MH, Ghole V, Lee CT, Abbaspour M
    Environ Sci Pollut Res Int, 2018 Dec;25(36):35805-35810.
    PMID: 29663297 DOI: 10.1007/s11356-018-1875-8
    Several treatment technologies are available for the treatment of palm oil mill wastes. Vermicomposting is widely recognized as efficient, eco-friendly methods for converting organic waste materials to valuable products. This study evaluates the effect of different vermicompost extracts obtained from palm oil mill effluent (POME) and palm-pressed fiber (PPF) mixtures on the germination, growth, relative toxicity, and photosynthetic pigments of mung beans (Vigna radiata) plant. POME contains valuable nutrients and can be used as a liquid fertilizer for fertigation. Mung bean seeds were sown in petri dishes irrigated with different dilutions of vermicomposted POME-PPF extracts, namely 50, 60, and 70% at varying dilutions. Results showed that at lower dilutions, the vermicompost extracts showed favorable effects on seed germination, seedling growth, and total chlorophyll content in mung bean seedlings, but at higher dilutions, they showed inhibitory effects. The carotenoid contents also decreased with increased dilutions of POME-PPF. This study recommends that the extracts could serve as a good source of fertilizer for the germination and growth enhancement of mung bean seedlings at the recommended dilutions.
  17. Earthworms as plug flow reactors: a first-order kinetic study on the gut of the vermicomposting earthworm Eudrilus eugeniae
    Kiyasudeen K, Ibrahim MH, Muhammad SA, Ismail SA, Gonawan FN, Zuknik MH
    Environ Sci Pollut Res Int, 2018 Nov;25(31):31062-31070.
    PMID: 30187407 DOI: 10.1007/s11356-018-3074-z
    Earthworms are commonly referred as environmental engineers and their guts are often compared with chemical reactors. However, modeling experiments to substantiate it are lacking. The aim of this study was to use established reactor models, particularly PFR, on the gut of the vermicomposting earthworm Eudrilus eugeniae to understand more on its digestion. To achieve the objective, a mathematical model based on first-order kinetics was framed and used to determine the pattern of digestion rates of nutrient indicators, namely total carbon (%), total nitrogen (%), C/N ratio, 13C (‰), and 15N (‰) at five intersections (pre-intestine, foregut, midgut A, midgut B, and hindgut) along the gut of E. eugeniae. The experimental results revealed that the concentrations of TC, TN, 13C, and 15N decreased during gut transit, whereas C/N ratio increased. The first-order model demonstrated that all the nutrients exhibit a linear pattern of digestion during gut transit, which supports the PFR model. On this basis, the present study concludes that the gut of E. eugeniae functions as PFR.
  18. Influence of coal ash on the concrete properties and its performance under sulphate and chloride conditions
    Mangi SA, Wan Ibrahim MH, Jamaluddin N, Arshad MF, Khahro SH, Putra Jaya R
    Environ Sci Pollut Res Int, 2021 Jun 24.
    PMID: 34165742 DOI: 10.1007/s11356-021-15006-x
    This study investigated the influence of coal bottom ash (CBA) on the concrete properties and evaluate the effects of combined exposure of sulphate and chloride conditions on the concrete containing CBA. During concrete mixing, cement was replaced with CBA by 10% of cement weight. Initially, concrete samples were kept in normal water for 28 days. Next, the specimens were moved to a combined solution of 5% sodium sulphate (Na2SO4) and 5% sodium chloride (NaCl) solution for a further 28 to 180 days. The experimental findings demonstrated that the concrete containing 10% CBA (M2) gives 12% higher compressive strength than the water cured normal concrete (M1). However, when it was exposed to a solution of 5% Na2SO4 and 5% NaCl, gives 0.2% greater compressive strength with reference to M1. The presence of 10% CBA decreases the chloride penetration and drying shrinkage around 33.6% and 29.2% respectively at 180 days. Hence, this study declared 10% CBA as optimum that can be used for future research.
  19. Fulltext Control of morphology and crystallinity of CNTs in flame synthesis with one-dimensional reaction zone
    Ibrahim MH, Hamzah N, Mohd Yusop MZ, Septiani NLW, Mohd Yasin MF
    Beilstein J Nanotechnol, 2023;14:741-750.
    PMID: 37377745 DOI: 10.3762/bjnano.14.61
    The growth of carbon nanotubes (CNTs) in a flame requires conditions that are difficult to achieve in a highly heterogeneous environment. Therefore, the analysis of the properties of the reaction zone within the flame is critical for the optimal growth of CNTs. In the present study, a comprehensive comparison between the CNT synthesis using a methane diffusion flame and a premixed flame is conducted regarding the morphology and crystallinity of the as-grown nanotubes. The premixed burner configuration created a flame that is stabilized through axisymmetric stagnation flow through sintered metal with one-dimensional geometry, different from a conventional co-flow flame. The significant difference in temperature distribution between the two flames causes a difference in the characteristics of the growth products. In the diffusion flame, the growth is limited to specific regions at certain height-above-burner (HAB) values with a temperature range of 750 to 950 °C at varying radial locations. The identified growth regions at different HAB values showed similar temperature distributions that yield CNTs of similar characteristics. Interestingly, the growth of CNTs in the premixed flame is dictated by only the HAB because the temperature distribution is relatively uniform along the radial directions but significantly different in the vertical direction. 17.3% variation in temperature in the axial direction successfully led to 44% and 66% variation in CNT diameter and crystallinity, respectively. The morphology control capability demonstrated in the present study is important for CNT functionalization for energy storage, nanosensor, and nanocomposite applications, where diameter and crystallinity are influential properties that govern the overall performance of the components.
  20. Fulltext Impact of simulated acid rain on chemical properties of Nyalau series soil and its leachate
    Ibrahim MH, Kasim S, Ahmed OH, Mohd Rakib MR, Hasbullah NA, Islam Shajib MT
    Sci Rep, 2024 Feb 12;14(1):3534.
    PMID: 38347036 DOI: 10.1038/s41598-024-52758-1
    Greenhouse gases can cause acid rain, which in turn degrades soil chemical properties. This research was conducted to determine the effects of simulated acid rain (SAR) on the chemical properties of Nyalau series (Typic paleudults). A 45-day laboratory leaching and incubation study (control conditions) was conducted following standard procedures include preparing simulated acid rain with specific pH levels, followed by experimental design/plan and systematically analyzing both soil and leachate for chemical changes over the 45-day period. Six treatments five of which were SAR (pH 3.5, 4.0, 4.5, 5.0, and 5.5) and one control referred to as natural rainwater (pH 6.0) were evaluated. From the study, the SAR had significant effects on the chemical properties of the soil and its leachate. The pH of 3.5 of SAR treatments decreased soil pH, K+, and fertility index. In contrast, the contents of Mg2+, Na+, SO42-, NO3-, and acidity were higher at the lower SAR pH. Furthermore, K+ and Mg2+ in the leachate significantly increased with increasing acidity of the SAR. The changes in Ca2+ and NH4+ between the soil and its leachate were positively correlated (r = 0.84 and 0.86), whereas the changes in NO3- negatively correlated (r = - 0.82). The novelty of these results lies in the discovery of significant alterations in soil chemistry due to simulated acid rain (SAR), particularly impacting soil fertility and nutrient availability, with notable positive and negative correlations among specific ions where prolonged exposure to acid rain could negatively affect the moderately tolerant to acidic and nutrient-poor soils. Acid rain can negatively affect soil fertility and the general soils ecosystem functions. Long-term field studies are required to consolidate the findings of this present study in order to reveal the sustained impact of SAR on tropical forest ecosystems, particularly concerning soil health, plant tolerance, and potential shifts in biodiversity and ecological balance.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links