Performance indicators for the optimal BTE of biodiesels with additives through engine testing by the Taguchi approach

Sanjeevannavar MB 1 , Banapurmath NR 2 , Soudagar MEM 3 , Atgur V 4 , Hossain N 5 , Mujtaba MA 6 Show all authors , Khan TMY 7 , Rao BN 4 , Ismail KA 8 , Elfasakhany A 9

Affiliations 

  • 1 Department of Mechanical Engineering, K.L.E. Dr. M S Sheshgiri College of Engineering and Technology, Belagavi, 590008, Karnataka, India
  • 2 Department of Mechanical Engineering, B.V. B. College of Engineering and Technology, K.L.E. Technological University, Hubballi, 580031, Karnataka, India
  • 3 Department of Mechanical Engineering, School of Technology, Glocal University, Delhi-Yamunotri Marg, SH-57, Mirzapur Pole, Saharanpur District, Uttar Pradesh 247121, India. Electronic address: [email protected]
  • 4 Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation (KLEF), Vaddeswaram - 522502, Andhra Pradesh, India
  • 5 School of Engineering, RMIT University, Melbourne, VIC 3001, Australia. Electronic address: [email protected]
  • 6 Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603, Kuala Lumpur, Malaysia
  • 7 Research Centre for Advanced Materials Science (RCAMS), King Khalid University, P.O.Box 9004, Abha, 61421, Saudi Arabia; Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha, 61421, Saudi Arabia
  • 8 Department of Clinical Laboratory Sciences, College of Applied Medical Sciences, Taif University, P.O. Box 11099, Taif, 21944, Saudi Arabia
  • 9 Mechanical Engineering Department, College of Engineering, Taif University, P.O. Box 11099, Taif, 21944, Saudi Arabia
Chemosphere, 2022 Feb;288(Pt 2):132450.
PMID: 34624353 DOI: 10.1016/j.chemosphere.2021.132450

Abstract

Biodiesel commercialization is questionable due to poor brake thermal efficiency. Biodiesel utilization should be improved with the addition of fuel additives. Hydrogen peroxide is a potential fuel additive due to extra hydrogen and oxygen content, which improves the combustion process. In this experimental study, biodiesel has been produced from Jatropha oil employing catalyzed transesterification homogeneously to examine its influence on the performance and emissions at engine loads with 1500 rpm utilizing a four-stroke single-cylinder diesel engine. D60B40 (having 60% diesel and 40% biodiesel) and D60B30A10 (60% diesel, 30% biodiesel and 10% hydrogen peroxide (H2O2)), are the fuel mixtures in the current study. The addition of H2O2 reduces emissions and enhances the combustion process. This effect occurred due to the micro-explosion of the injected fuel particles (which increases in-cylinder pressure and heat release rate (HRR)). An increase of 20% in BTE and 25% reduction in BSFC for D60B30A10 was observed compared to D60B40. Significant reduction in emissions of HC up to 17.54%, smoke by 24.6% CO2 by 3.53%, and an increase in NOx was noticed when the engine is operated with D60B30A10. The HRR increased up to 18.6%, ID reduced by 10.82%, and in-cylinder pressure increased by 8.5%. Test runs can be minimized as per Taguchi's design of experiments. It is possible to provide the estimates for the full factorial design of experiments. Exhaust gas temperature standards are evaluated and examined for all fuel blends.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.

MeSH terms
Similar publications