Affiliations 

  • 1 Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor Bahru, Malaysia; Department of Environmental Engineering, School of Civil Engineering and Geosciences, Newcastle University, NE1 7RU Newcastle upon Tyne, United Kingdom
  • 2 Centre for Environmental Sustainability and Water Security, Research Institute for Sustainable Environment, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor Bahru, Malaysia; Department of Environmental Engineering, Faculty of Civil Engineering, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor Bahru, Malaysia. Electronic address: [email protected]
  • 3 Department of Environmental Engineering, Faculty of Civil Engineering, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor Bahru, Malaysia
  • 4 Centre for Environmental Sustainability and Water Security, Research Institute for Sustainable Environment, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor Bahru, Malaysia; Department of Environmental Engineering, Faculty of Civil Engineering, Universiti Teknologi Malaysia, UTM Skudai, 81310 Johor Bahru, Malaysia
  • 5 Department of Environmental Engineering, School of Civil Engineering and Geosciences, Newcastle University, NE1 7RU Newcastle upon Tyne, United Kingdom
J Environ Manage, 2016 Mar 1;168:273-9.
PMID: 26760229 DOI: 10.1016/j.jenvman.2015.12.015

Abstract

The treatment of high-strength organic brewery wastewater with added acetaminophen (AAP) by an anaerobic digester was investigated. An anaerobic packed-bed reactor (APBR) was operated as a continuous process with an organic loading rate of 1.5-g COD per litre per day and a hydraulic retention time of three days. The results of steady-state analysis showed that the greatest APBR performances for removing COD and TOC were as high as 98 and 93%, respectively, even though the anaerobic digestibility after adding the different AAP concentrations of 5, 10 and 15 mg L(-1) into brewery wastewater can affect the efficiency of organic matter removal. The average CH4 production decreased from 81 to 72% is counterbalanced by the increased CO2 production from 11 to 20% before and after the injection of AAP, respectively. The empirical kinetic models for substrate utilisation and CH4 production were used to predict that, under unfavourable conditions, the performance of the APBR treatment process is able to remove COD with an efficiency of only 6.8%.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.