Affiliations 

  • 1 Faculty of Civil Engineering and Built Environment, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia; Ministry of Health Malaysia, Kompleks E, Pusat Pentadbiran Kerajaan Persekutuan, 62590 Putrajaya, Malaysia
  • 2 Faculty of Civil Engineering and Built Environment, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia. Electronic address: [email protected]
  • 3 Micropollutant Research Centre, Institute for Integrated Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia. Electronic address: [email protected]
  • 4 School of Chemistry and Environment, Faculty of Applied Science, Universiti Teknologi Mara, 40450 Shah Alam, Selangor, Malaysia
  • 5 Department of Water and Environmental Engineering, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310, Johor, Malaysia; Center for Environmental Sustainability and Water Security (IPASA), Faculty of Civil Engineering, Universiti Teknologi Malaysia (UTM), Skudai 81310, Johor, Malaysia
Int J Biol Macromol, 2024 Sep 08;279(Pt 3):135499.
PMID: 39255888 DOI: 10.1016/j.ijbiomac.2024.135499

Abstract

Cationic Manihot esculenta (ME) peel starch was synthesized through etherification method using 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC) as cationizing monomer. The optimization of the main factors influencing the degree of substitution (DS) was conducted using central composite design (CCD) and response surface methodology (RSM). The factors assessed include CHPTAC concentration, catalyst sodium hydroxide (NaOH) concentration, and reaction time. The DS values of the cationic starches were obtained between 0.39 and 0.99. The maximum DS value was up to 0.99 at 0.615 mol/L of CHPTAC, 30 % (w/v) NaOH, and a reaction time of 5 h. The finding based on the optimization using RSM reflected that CHPTAC and NaOH concentrations are the key variables determining the DS value, while reaction time has a negligible impact on the etherification process. Furthermore, the chemical composition, morphology, and structure of the cationic ME peel starch were characterized by scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX), Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and nuclear magnetic resonance spectroscopy (1H NMR). It was confirmed that the modifying monomers penetrated the surface layer of the starch granules and attached to the starch backbone.

* Title and MeSH Headings from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.