MyMedR

Displaying all 11 publications

Abstract:

Sort:

A comparison of pressure distributions between two types of sockets in a bulbous stump

Gholizadeh H, Abu Osman NA, Eshraghi A, Arifin N, Chung TY

Prosthet Orthot Int, 2016 Aug;40(4):509-16.
PMID: 25583929 DOI: 10.1177/0309364614564022

BACKGROUND: This article describes a total surface bearing prosthetic socket for a patient (25-year-old female) with a bulbous stump.
CASE DESCRIPTION AND METHODS: The subject had unstable excessive soft tissue at the distal end of the residuum. After 2 years of prosthetic use, she experienced several problems, including pain in the residual limb and knee joint. Pressure distribution was evaluated during ambulation. We also designed a total surface bearing socket with Velcro as suspension system to distribute the load evenly on the residual limb, and to facilitate donning procedure.
FINDINGS AND OUTCOMES: The main site of weight bearing in the old prosthesis (patellar tendon bearing) was anterior proximal region of the residual limb, especially the patellar tendon. The pressure was almost 10 times higher than the distal region during level walking. Pressures were distributed more evenly with the total surface bearing socket design, and the donning was much easier.
CONCLUSION: Pressure distribution within the socket could be affected by socket design and suspension system. Using the total surface bearing socket and Velcro as suspension system might facilitate donning of prosthesis and reduce traction at the end of residual limb during the swing phase of gait.
CLINICAL RELEVANCE: Proper socket design and suspension system based on the amputees' need can facilitate rehabilitation process and lead to the amputee's satisfaction. The pressure is distributed more uniformly over the residual limb by the total surface bearing socket compared to the patellar tendon bearing socket for lower limb amputees with unusual stump shape.

Matched MeSH terms: Weight-Bearing/physiology*
Dual photon excitation microscopy and image threshold segmentation in live cell imaging during compression testing

Moo EK, Abusara Z, Abu Osman NA, Pingguan-Murphy B, Herzog W

J Biomech, 2013 Aug 9;46(12):2024-31.
PMID: 23849134 DOI: 10.1016/j.jbiomech.2013.06.007

Morphological studies of live connective tissue cells are imperative to helping understand cellular responses to mechanical stimuli. However, photobleaching is a constant problem to accurate and reliable live cell fluorescent imaging, and various image thresholding methods have been adopted to account for photobleaching effects. Previous studies showed that dual photon excitation (DPE) techniques are superior over conventional one photon excitation (OPE) confocal techniques in minimizing photobleaching. In this study, we investigated the effects of photobleaching resulting from OPE and DPE on morphology of in situ articular cartilage chondrocytes across repeat laser exposures. Additionally, we compared the effectiveness of three commonly-used image thresholding methods in accounting for photobleaching effects, with and without tissue loading through compression. In general, photobleaching leads to an apparent volume reduction for subsequent image scans. Performing seven consecutive scans of chondrocytes in unloaded cartilage, we found that the apparent cell volume loss caused by DPE microscopy is much smaller than that observed using OPE microscopy. Applying scan-specific image thresholds did not prevent the photobleaching-induced volume loss, and volume reductions were non-uniform over the seven repeat scans. During cartilage loading through compression, cell fluorescence increased and, depending on the thresholding method used, led to different volume changes. Therefore, different conclusions on cell volume changes may be drawn during tissue compression, depending on the image thresholding methods used. In conclusion, our findings confirm that photobleaching directly affects cell morphology measurements, and that DPE causes less photobleaching artifacts than OPE for uncompressed cells. When cells are compressed during tissue loading, a complicated interplay between photobleaching effects and compression-induced fluorescence increase may lead to interpretations in cell responses to mechanical stimuli that depend on the microscopic approach and the thresholding methods used and may result in contradictory interpretations.

Matched MeSH terms: Weight-Bearing/physiology
Design of new generation femoral prostheses using functionally graded materials: a finite element analysis

Oshkour AA, Abu Osman NA, Yau YH, Tarlochan F, Abas WA

Proc Inst Mech Eng H, 2013 Jan;227(1):3-17.
PMID: 23516951

This study aimed to develop a three-dimensional finite element model of a functionally graded femoral prosthesis. The model consisted of a femoral prosthesis created from functionally graded materials (FGMs), cement, and femur. The hip prosthesis was composed of FGMs made of titanium alloy, chrome-cobalt, and hydroxyapatite at volume fraction gradient exponents of 0, 1, and 5, respectively. The stress was measured on the femoral prosthesis, cement, and femur. Stress on the neck of the femoral prosthesis was not sensitive to the properties of the constituent material. However, stress on the stem and cement decreased proportionally as the volume fraction gradient exponent of the FGM increased. Meanwhile, stress became uniform on the cement mantle layer. In addition, stress on the femur in the proximal part increased and a high surface area of the femoral part was involved in absorbing the stress. As such, the stress-shielding area decreased. The results obtained in this study are significant in the design and longevity of new prosthetic devices because FGMs offer the potential to achieve stress distribution that more closely resembles that of the natural bone in the femur.

Matched MeSH terms: Weight-Bearing/physiology*
Effect of Milwaukee brace on static and dynamic balance of female hyperkyphotic adolescents

Eshraghi A, Maroufi N, Sanjari MA, Saeedi H, Keyhani MR, Gholizadeh H, et al.

Prosthet Orthot Int, 2013 Feb;37(1):76-84.
PMID: 22751219 DOI: 10.1177/0309364612448805

Biomechanical factors, such as spinal deformities can result in balance control disorders.

Matched MeSH terms: Weight-Bearing/physiology
Simplifying four-strand flexor tendon repair using double-stranded suture: a comparative ex vivo study on tensile strength and bulking

Low TH, Ahmad TS, Ng ES

J Hand Surg Eur Vol, 2012 Feb;37(2):101-8.
PMID: 21636621 DOI: 10.1177/1753193411409840

We have compared a simple four-strand flexor tendon repair, the single cross-stitch locked repair using a double-stranded suture (dsSCL) against two other four-strand repairs: the Pennington modified Kessler with double-stranded suture (dsPMK); and the cruciate cross-stitch locked repair with single-stranded suture (Modified Sandow). Thirty fresh frozen cadaveric flexor digitorum profundus tendons were transected and repaired with one of the core repair techniques using identical suture material and reinforced with identical peripheral sutures. Bulking at the repair site and tendon-suture junctions was measured. The tendons were subjected to linear load-to-failure testing. Results showed no significant difference in ultimate tensile strength between the Modified Sandow (36.8 N) and dsSCL (32.6 N) whereas the dsPMK was significantly weaker (26.8 N). There were no significant differences in 2 mm gap force, stiffness or bulk between the three repairs. We concluded that the simpler dsSCL repair is comparable to the modified Sandow repair in tensile strength, stiffness and bulking.

Matched MeSH terms: Weight-Bearing/physiology
Interface pressure profile analysis for patellar tendon-bearing socket and hydrostatic socket

Moo EK, Osman NA, Pingguan-Murphy B, Abas WA, Spence WD, Solomonidis SE

Acta Bioeng Biomech, 2009;11(4):37-43.
PMID: 20405814

Conventionally, patellar tendon-bearing (PTB) sockets, which need high dexterity of prosthetist, are widely used. Lack of chartered and experienced prosthetist has often led to painful experience of wearing prosthesis and this will in turn deter the patients to wear the prosthesis, which will further aggravate stump shrinkage. Thus, the hydrostatic socket which demands relatively lower level of fabricating skill is proposed to replace the PTB socket in order to produce the equivalent, if not better, quality of support to the amputee patients. Both sockets' pressure profiles are studied and compared using finite element analysis (FEA) software. Three-dimensional models of both sockets were developed using MIMICS software. The analysis results showed that hydrostatic socket did exhibit more uniform pressure profiles than that of PTB socket. PTB socket showed pressure concentration near the proximal brim of the socket and also at the distal fibula. It was also found that the pressure magnitude in hydrostatic socket is relatively lower than that of PTB socket.

Matched MeSH terms: Weight-Bearing/physiology
Fulltext The Effects of Physiological Biomechanical Loading on Intradiscal Pressure and Annulus Stress in Lumbar Spine: A Finite Element Analysis

Zahari SN, Latif MJA, Rahim NRA, Kadir MRA, Kamarul T

J Healthc Eng, 2017;2017:9618940.
PMID: 29065672 DOI: 10.1155/2017/9618940

The present study was conducted to examine the effects of body weight on intradiscal pressure (IDP) and annulus stress of intervertebral discs at lumbar spine. Three-dimensional finite element model of osseoligamentous lumbar spine was developed subjected to follower load of 500 N, 800 N, and 1200 N which represent the loads for individuals who are normal and overweight with the pure moments at 7.5 Nm in flexion and extension motions. It was observed that the maximum IDP was 1.26 MPa at L1-L2 vertebral segment. However, the highest increment of IDP was found at L4-L5 segment where the IDP was increased to 30% in flexion and it was more severe at extension motion reaching to 80%. Furthermore, the maximum annulus stress also occurred at the L1-L2 segment with 3.9 MPa in extension motion. However, the highest increment was also found at L4-L5 where the annulus stress increased to 17% in extension motion. Based on these results, the increase of physiological loading could be an important factor to the increment of intradiscal pressure and annulus fibrosis stress at all intervertebral discs at the lumbar spine which may lead to early intervertebral disc damage.

Matched MeSH terms: Weight-Bearing/physiology*
Development of prolonged standing strain index to quantify risk levels of standing jobs

Halim I, Omar AR

Int J Occup Saf Ergon, 2012;18(1):85-96.
PMID: 22429532

Many occupations in industry such as metal stamping workers, electronics parts assembly operators, automotive industry welders, and lathe operators require working in a standing posture for a long time. Prolonged standing can contribute to discomfort and muscle fatigue particularly in the back and legs. This study developed the prolonged standing strain index (PSSI) to quantify the risk levels caused by standing jobs, and proposed recommendations to minimize the risk levels. Risk factors associated with standing jobs, such as working posture, muscles activity, standing duration, holding time, whole-body vibration, and indoor air quality, were the basis for developing the PSSI. All risk factors were assigned multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness. multipliers, and the PSSI was the product of those multipliers. Recommendations for improvement are based on the PSSI; however, extensive studies are required to validate their effectiveness.

Matched MeSH terms: Weight-Bearing/physiology
Fulltext Preliminary analysis of knee stress in full extension landing

Makinejad MD, Abu Osman NA, Abu Bakar Wan Abas W, Bayat M

Clinics (Sao Paulo), 2013 Sep;68(9):1180-8.
PMID: 24141832 DOI: 10.6061/clinics/2013(09)02

This study provides an experimental and finite element analysis of knee-joint structure during extended-knee landing based on the extracted impact force, and it numerically identifies the contact pressure, stress distribution and possibility of bone-to-bone contact when a subject lands from a safe height.

Matched MeSH terms: Weight-Bearing/physiology
Spinal tuberculosis: the association between pedicle involvement and anterior column damage and kyphotic deformity

Yusof MI, Hassan E, Rahmat N, Yunus R

Spine (Phila Pa 1976), 2009 Apr 1;34(7):713-7.
PMID: 19333105 DOI: 10.1097/BRS.0b013e31819b2159

Pedicle involvement in spinal tuberculosis (TB), the prevertebral abscess formation, severity of vertebral body, and disc collapse were evaluated from magnetic resonance imaging (MRI) of the patients.

Matched MeSH terms: Weight-Bearing/physiology
Fulltext Efficacy and tolerability of celecoxib compared with diclofenac slow release in the treatment of acute ankle sprain in an Asian population

Nadarajah A, Abrahan L, Lau FL, Hwang LJ, Fakir-Bolte C

Singapore Med J, 2006 Jun;47(6):534-42.
PMID: 16752024

INTRODUCTION: Cyclooxygenase (COX)-2 selective inhibitors are attractive candidates for treatment of ankle sprain because of their efficacy as anti-inflammatory and analgesic agents and their overall safety, including lack of effect on platelet aggregation. The objective of this study was to assess the efficacy and tolerability of celecoxib compared with diclofenac slow release (SR) in the treatment of acute ankle sprain in an Asian population.
METHODS: In this seven-day, multicentre, double-blind, randomised, parallel-group trial, 370 patients with first- or second-degree ankle sprain occurring at or less than 48 hours prior to the first dose of study medication were randomised to receive celecoxib 200 mg bid (189 patients) after a 400 mg loading dose or diclofenac SR 75 mg bid (181 patients). Patients were required to demonstrate moderate to severe ankle pain on weight bearing (45 mm or greater on a 100 mm visual analogue scale [VAS]) at baseline. The primary efficacy end point was the patient's assessment of ankle pain (VAS on full weight bearing) on day 4.
RESULTS: Celecoxib was as effective as diclofenac SR in improving the signs and symptoms of ankle sprain. At day 4, mean VAS scores for celecoxib and diclofenac SR had decreased to 28 mm and 30 mm, respectively. Treatment differences were not statistically significant. Incidence of upper gastrointestinal adverse events was low in both treatment groups (0.5 percent versus 2.2 percent for celecoxib and diclofenac SR, respectively).
CONCLUSION: Celecoxib, a COX-2 selective inhibitor, is as effective as diclofenac SR in treating ankle sprains. With its platelet-sparing properties, celecoxib may offer an advantage over diclofenac SR in managing musculoskeletal injuries.

Matched MeSH terms: Weight-Bearing/physiology