MyMedR

Displaying all 19 publications

Abstract:

Sort:

Effect of preculture, pvs2 and vitamin C on survival of recalcitrant Nephelium ramboutan-ake shoot tips after cryopreservation by vitrification

Chua SP, Normah MN

Cryo Letters, 2011 Nov-Dec;32(6):506-15.
PMID: 22227711

This paper reports the cryopreservation of Nephelium ramboutan-ake shoot tips derived from in vitro shoot multiplication and in vitro seed germination using vitrification. Preculture with either 0.5 M sucrose for 2 days or a combination of 0.3 M sucrose and 0.5 M glycerol for 3 days enhanced dehydration tolerance and resulted in the highest survival of shoot tips; however, none of the shoot tips withstood liquid nitrogen (LN) exposure. The use of a lower temperature (0 degree C) during exposure to plant vitrification solution (PVS2) led to higher survival of shoot tips, compared to exposure at 25 degree C. The survival percentage of shoot tips exposed to PVS2 for up to 20 min at 0°C was 83.3 percent. It was only 53.3 percent when shoot tips were exposed to PVS2 at 25 degree C for 5 min. The importance of vitamin C for reducing oxidative stress in shoots tips was demonstrated. The addition of 0.28 mM vitamin C during critical steps of the vitrification process resulted in a high survival (96.7 percent) without LN exposure, compared to 73.3 percent for shoot tips not treated with vitamin C. Moreover, 3.3 percent shoot tips withstood LN exposure when vitamin C was added during the loading step. This result suggests that cryopreservation is possible for this tropical, recalcitrant seeded tree species.

Matched MeSH terms: Vitrification*
Cryopreservation of shoot tips of recalcitrant and tropical species: Advances and strategies

Normah MN, Sulong N, Reed BM

Cryobiology, 2019 04;87:1-14.
PMID: 30677412 DOI: 10.1016/j.cryobiol.2019.01.008

There is a pressing need for practical and successful conservation efforts to establish long-term germplasm collections of recalcitrant and tropical species, given the challenge and threat that these plants are facing. Cryopreservation is the only way of conserving some of these species, especially those with temperature or desiccation sensitive (recalcitrant) seeds. This review covers reports on cryopreservation studies of shoot tips (apical and axillary) of tropical and subtropical plants. Since many of these species have recalcitrant seeds, the cryopreservation successes, failures and problems involved with these seeds are also discussed. The methodologies, important factors and steps involved in successful cryopreservation protocols are analyzed. Finally strategies are suggested to develop a successful cryopreservation protocol for new plant species, in particular those with tropical recalcitrant seeds.

Matched MeSH terms: Vitrification
Fulltext Free-Radical Photopolymerization of Acrylonitrile Grafted onto Epoxidized Natural Rubber

Whba R, Su'ait MS, Tian Khoon L, Ibrahim S, Mohamed NS, Ahmad A

Polymers (Basel), 2021 Feb 23;13(4).
PMID: 33672185 DOI: 10.3390/polym13040660

The exploitation of epoxidized natural rubber (ENR) in electrochemical applications is approaching its limits because of its poor thermo-mechanical properties. These properties could be improved by chemical and/or physical modification, including grafting and/or crosslinking techniques. In this work, acrylonitrile (ACN) has been successfully grafted onto ENR- 25 by a radical photopolymerization technique. The effect of (ACN to ENR) mole ratios on chemical structure and interaction, thermo-mechanical behaviour and that related to the viscoelastic properties of the polymer was investigated. The existence of the -C≡N functional group at the end-product of ACN-g-ENR is confirmed by infrared (FT-IR) and nuclear magnetic resonance (NMR) analyses. An enhanced grafting efficiency (~57%) was obtained after ACN was grafted onto the isoprene unit of ENR- 25 and showing a significant improvement in thermal stability and dielectric properties. The viscoelastic behaviour of the sample analysis showed an increase of storage modulus up to 150 × 103 MPa and the temperature of glass transition (Tg) was between -40 and 10 °C. The loss modulus, relaxation process, and tan delta were also described. Overall, the ACN-g-ENR shows a distinctive improvement in characteristics compared to ENR and can be widely used in many applications where natural rubber is used but improved thermal and mechanical properties are required. Likewise, it may also be used in electronic applications, for example, as a polymer electrolyte in batteries or supercapacitor.

Matched MeSH terms: Vitrification
Fulltext High-Throughput Non-Contact Vitrification of Cell-Laden Droplets Based on Cell Printing

Shi M, Ling K, Yong KW, Li Y, Feng S, Zhang X, et al.

Sci Rep, 2015 Dec 14;5:17928.
PMID: 26655688 DOI: 10.1038/srep17928

Cryopreservation is the most promising way for long-term storage of biological samples e.g., single cells and cellular structures. Among various cryopreservation methods, vitrification is advantageous by employing high cooling rate to avoid the formation of harmful ice crystals in cells. Most existing vitrification methods adopt direct contact of cells with liquid nitrogen to obtain high cooling rates, which however causes the potential contamination and difficult cell collection. To address these limitations, we developed a non-contact vitrification device based on an ultra-thin freezing film to achieve high cooling/warming rate and avoid direct contact between cells and liquid nitrogen. A high-throughput cell printer was employed to rapidly generate uniform cell-laden microdroplets into the device, where the microdroplets were hung on one side of the film and then vitrified by pouring the liquid nitrogen onto the other side via boiling heat transfer. Through theoretical and experimental studies on vitrification processes, we demonstrated that our device offers a high cooling/warming rate for vitrification of the NIH 3T3 cells and human adipose-derived stem cells (hASCs) with maintained cell viability and differentiation potential. This non-contact vitrification device provides a novel and effective way to cryopreserve cells at high throughput and avoid the contamination and collection problems.

Matched MeSH terms: Vitrification*
Development of a PVS2 droplet-vitrification cryopreservation technique for Aranda Broga Blue orchid protocorm-like bodies (PLBs)

Ping KS, Poobathy RR, Zakaria R, Subramaniam S

Cryo Letters, 2018 5 8;38(4):290-298.
PMID: 29734430

　　BACKGROUND: Conservation of commercially important ornamental plants is important to maintain its unique beauty to cater the market demands.
OBJECTIVE: The main objective is to develop an efficient cryopreservation technique for Aranda Broga Blue orchid PLBs using droplet-vitrification method.
MATERIALS AND METHODS: Several critical factors in cryopreservation were accessed such as preculture concentrations and durations, choice of vitrification solutions, two-step or three-step vitrification, growth recovery medium and PVS2 exposure duration.
RESULTS: The best growth regeneration percentage (5%) was obtained when 3-4mm PLBs were precultured in 0.2M sucrose for 3 days, followed by osmoprotection for 20 minutes, dehydration in PVS2 for 20 minutes at 0 degree C, LN storage, thawed and unloading for 20 minutes, and growth regeneration in VW10 medium. PLBs were found to be very sensitive to osmotic stress imposed by high molecular weight cryoprotectant such as sucrose and glycerol. Osmotic potential of growth recovery medium is one of the main factors that affect growth recovery in cryopreserved PLBs.
CONCLUSION: Current report showed possibilities in cryopreserving Aranda Broga Blue PLBs using droplet-vitrification technique. However, further improvement of growth recovery can be done by focussing on approaches that facilitate sufficient water removal from PLBs without causing severe osmotic injuries to the plant cells.

Matched MeSH terms: Vitrification*
Improved cryopreservation of oil palm (Elaeis guineensis Jacq.) polyembryoids using droplet vitrification approach and assessment of genetic fidelity

Gantait S, Sinniah UR, Suranthran P, Palanyandy SR, Subramaniam S

Protoplasma, 2015 Jan;252(1):89-101.
PMID: 24893588 DOI: 10.1007/s00709-014-0660-x

In the present study, polyembryoids of oil palm (Elaeis guineensis Jacq.) were cryopreserved with successful revival of 68 % for the first time using the droplet vitrification technique. Excised polyembryoids (3-5-mm diameter) from 3-month-old in vitro cultures were pre-cultured for 12 h in liquid Murashige and Skoog medium supplemented with 0.5 M sucrose. The polyembryoids were osmoprotected in loading solution [10% (w/v) dimethyl sulphoxide (DMSO) plus 0.7 M sucrose] for 30 min at room temperature and then placed on aluminium strips where they were individually drenched in chilled droplets of vitrification solution (PVS2) [30% (w/v) glycerol plus 15% (w/v) ethylene glycol (EG) plus 15% (w/v) DMSO plus 0.4 M sucrose] for 10 min. The aluminium strips were enclosed in cryovials which were then plunged quickly into liquid nitrogen and kept there for 1 h. The polyembryoids were then thawed and unloaded (using 1.2 M sucrose solution) with subsequent transfer to regeneration medium and stored in zero irradiance. Following for 10 days of storage, polyembryoids were cultured under 16 h photoperiod of 50 μmol m(-2) s(-1) photosynthetic photon flux density, at 23 ± 1 °C. Post-thaw growth recovery of 68% was recorded within 2 weeks of culture, and new shoot development was observed at 4 weeks of growth. Scanning electron microscopy revealed that successful regeneration of cryopreserved polyembryoids was related to maintenance of cellular integrity, presumably through PVS2 exposure for 10 min. The present study demonstrated that cryopreservation by droplet vitrification enhanced the regeneration percentages of oil palm in comparison with the conventional vitrification method previously reported.

Matched MeSH terms: Vitrification
Timing of The First Zygotic Cleavage Affects Post-Vitrification Viability of Murine Embryos Produced In Vivo

Jusof WH, Khan NA, Rajikin MH, Satar NA, Mustafa MF, Jusoh N, et al.

Int J Fertil Steril, 2015 07 27;9(2):221-9.
PMID: 26246881

BACKGROUND: Timing of the first zygotic cleavage is an accurate predictor of embryo quality. Embryos that cleaved early (EC) have been shown to exhibit higher develop- mental viability compared to those that cleaved at a later period (LC). However, the vi- ability of EC embryos in comparison to LC embryos after vitrification is unknown. The present study aims to investigate the post-vitrification developmental viability of murine EC versus LC embryos.
MATERIALS AND METHODS: In this experimental study, female ICR mice (6-8 weeks old) were superovulated and cohabited with fertile males for 24 hours. Afterwards, their ovi- ducts were excised and embryos harvested. Embryos at the 2-cell stage were catego- rized as EC embryos, while zygotes with two pronuclei were categorized as LC embryos. Embryos were cultured in M16 medium supplemented with 3% bovine serum albumin (BSA) in a humidified 5% CO2atmosphere. Control embryos were cultured until the blastocyst stage without vitrification. Experimental embryos at the 2-cell stage were vitri- fied for one hour using 40% v/v ethylene glycol, 18% w/v Ficoll-70 and 0.5 M sucrose as the cryoprotectant. We recorded the numbers of surviving embryos from the control and experimental groups and their development until the blastocyst stage. Results were analyzed using the chi-square test.
RESULTS: A significantly higher proportion of EC embryos (96.7%) from the control group developed to the blastocyst stage compared with LC embryos (57.5%, P<0.0001). Similarly, in the experimental group, a significantly higher percentage of vitrified EC embryos (69.4%) reached the blastocyst stage compared to vitrified LC embryos (27.1%, P<0.0001).
CONCLUSION: Vitrified EC embryos are more vitrification tolerant than LC embryos. Prese- lection of EC embryos may be used as a tool for selection of embryos that exhibit higher developmental competence after vitrification.

Matched MeSH terms: Vitrification
Fulltext Microcapsules Filled with a Palm Oil-Based Alkyd as Healing Agent for Epoxy Matrix

Shahabudin N, Yahya R, Gan SN

Polymers (Basel), 2016 Apr 06;8(4).
PMID: 30979216 DOI: 10.3390/polym8040125

One of the approaches to prolong the service lifespan of polymeric material is the development of self-healing ability by means of embedded microcapsules containing a healing agent. In this work, poly(melamine-urea-formaldehyde) (PMUF) microcapsules containing a palm oil-based alkyd were produced by polymerization of melamine resin, urea and formaldehyde that encapsulated droplets of the suspended alkyd particles. A series of spherical and free-flowing microcapsules were obtained. The chemical properties of core and shell materials were characterized by Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Differential scanning calorimetry (DSC) analysis showed a glass transition around -15 °C due to the alkyd, and a melting temperature at around 200 °C due to the shell. Thermogravimetric analysis (TGA) results showed that the core and shell thermally degraded within the temperature range of 200⁻600 °C. Field emission scanning electron microscope (FESEM) examination of the ruptured microcapsule showed smooth inner and rough outer surfaces of the shell. Flexural strength and microhardness (Vickers) of the cured epoxy compound were not affected with the incorporation of 1%⁻3% of the microcapsules. The viability of the healing reactions was demonstrated by blending small amounts of alkyd with epoxy and hardener at different ratios. The blends could readily cure to non-sticky hard solids at room temperature and the reactions could be verified by ATR-FTIR.

Matched MeSH terms: Vitrification
Fulltext The Impact of Ethylene Glycol on Droplet Growth Inhibition in Ethylene Vinyl Acetate Emulsions

Rosdi MRH, Ahmad Razali MA, Ku Ishak KM, Ariffin A

ACS Omega, 2020 Jun 23;5(24):14473-14480.
PMID: 32596585 DOI: 10.1021/acsomega.0c01114

Pour point depressant (PPD) emulsion has been gaining attention in crude oil transportation owing to its potential to solve solidification issues that arise in cold climate environments. An emulsion system provides a wide range of temperature application that combines good shelf life and tunable thermal properties to tackle this problem. These features can be achieved by incorporating an antifreeze agent into the emulsion. One of the most commonly used antifreeze agents is ethylene glycol (EG). Hence, this study focuses on the thermal properties and droplet size growth of PPD emulsions that were aged in variable concentrations of EG solution. EG50 exhibited the lowest freezing temperature of -44 °C, while EG25 demonstrated the lowest vitrification temperature of -68.7 °C. The particle size of the emulsions underwent a significant reduction from 332.3 to 228.9 nm upon the stepwise EG concentration increment to EG50. However, when the concentration was increased to EG75, a slight increase in the emulsion particle size was observed with a recorded value of 237.8 nm. Thus, it is concluded that EG50 represents the optimum concentration for delivering the best freezing protection and producing a smaller droplet particle size.

Matched MeSH terms: Vitrification
Fulltext Ascorbate peroxidase activity of Aranda Broga Blue orchid protocorm-like bodies (plbs) in response to PVS2 cryopreservation method

Khor, Soo Ping, Rahmad Zakaria, Subramaniam, Sreeramanan

Trop Life Sci Res, 2016;27(11):139-143.
MyJurnal

Throughout the cryopreservation process, plants were exposed to a series of
abiotic stresses such as desiccation and osmotic pressure due to highly concentrated
vitrification solution. Abiotic stress stimulates the production of reactive oxygen species
(ROS) which include hydrogen peroxide, superoxide radicals, and singlet oxygen. Higher
production of ROS may lead to oxidative stress which contributes to the major injuries in
cryopreserved explants. Antioxidant enzymes in plant such as ascorbate peroxidase
(APX) can protect plants from cell damage by scavenging the free radicals. This study was
determined based on APX enzyme activity of Aranda Broga Blue orchid’s protocorm-like
bodies (PLBs) in response to PVS2 (Plant Vitrification Solution 2) cryopreservation
treatments at different stages. PLBs that were precultured at 0.25 M sucrose for 3 days
were subjected to vitrification cryopreservation method. Results obtained showed that the
highest APX activity was achieved at PVS2 cryoprotectant treatment prior liquid nitrogen
(LN) storage. This phenomenon indicating that accumulation of osmotic and dehydrating
stress throughout the cryopreservation treatment resulted in oxidative burst which in turn
leads to higher APX activity in order to control the excess production of ROS. To
conclude, PVS2 treatment was revealed as the most detrimental step throughout
cryopreservation treatment. Thus, this research also suggested that exogenous
antioxidant such as ascorbic acid can be added throughout cryopreservation procedure
especially at PVS2 treatment in the future experiments to aid in regrowth of cryopreserved
explants by reducing oxidative stress.

Matched MeSH terms: Vitrification
Fulltext Feasibility study on vitrification of spent ion exchange resins from TRIGA reactor Malaysia

Rohyiza Ba’an, Zalina Laili, Mohd Abdul Wahab Yusof, Muhamat Omar

Journal of Nuclear and Related Technologies, 2013;2013(2):30-42.
MyJurnal

Feasibility studies on the vitrification of spent ion exchange resins combined with glass cullet powder have been conducted using a High Temperature Test Furnace. Bottle glass cullet powder was used as matrix material to convert the ash of the spent resins into a glass. Vitrificat ion of spent ion exchange resins presents a reasonable disposal alternative, because of its inherent organic destruction capabilities, the volume reduction levels obtainable, and the durable product that it yields. In this study, the spent ion exchange resin from the PUSPATI TRIGA reactor of Nuclear Malaysia was combusted in a lab scale combustor and the resulting ash was vitrified together with glass cullet powder in a high temperature furnace to produce a stable spent resin ash embedded in glass. The factors affecting this immobilized waste, such as thermal stability, radiological stability and leachability have all been investigated. However, the outcome of these tests, which include the radionuclide activity concentration in the slag, the optimum conditioning temperature - in relation with volume reduction during vitrification - and the volume mixing ratio of matrix material were reported. It was found that the radionuclides present in spent resins were 54 Mn, 60 Co and 152Eu. The elementary chemical composition (carbon, hydrogen, nitrogen and sulphur) of spent resins was 27.6% C, 5.68% H, 2.04% N and 4.20% S, respectively. The maximum calorific value of spent resins was 1735 kJ/kg. The average activity concentrations of 54 Mn and 60Co in ash at 200oC were 9,411 ± 243 Bq/Kg and 12,637± 201 Bq/Kg. flue gases containing CO2, CO, SO2 and NO started to be emitted above 200oC. The optimum conditioning temperature was also the highest tested, i.e. 900oC in 45 minutes, and the best mixing ratio ash to matrix material was also the highest, ie 1:9. Finally, the leaching analysis of slag at 900oC in 45 minutes showed that the leaching activity of 60Co was below 0.5 Bq/mL.

Matched MeSH terms: Vitrification
Biochemical analyses of Dendrobium Sabin Blue PLBs during cryopreservation by vitrification

James Antony JJ, Zakaria S, Zakaria R, Anak Ujang J, Othman N, Subramaniam S

Physiol Mol Biol Plants, 2019 Nov;25(6):1457-1467.
PMID: 31736548 DOI: 10.1007/s12298-019-00703-2

Dendrobium Sabin Blue is an important orchid hybrid that has been grown extensively as cut flower, potted plant and is also popular for its deep purplish blue flowers. The most efficient long term conservation method of this hybrid is through cryopreservation. Cryopreservation involving the vitrification method consists of explants exposure to highly concentrated cryoprotective solution followed by freezing rapidly in liquid nitrogen. However, these treatments involved highly concentrated cryoprotectant that could incur toxicity to the explants. Hence, cryopreservation protocol requires biochemical analyses in understanding the damages or injuries occurred during cryopreservation treatments. In this study, biochemical analyses revealed a general reduction in chlorophyll, carotenoid and porphyrin content to 0.40 µg/g F W (thawing stage), 31.50 µg/g F W unloading stage and 2230.41 µg/g F W (thawing stage), respectively in comparison to the control treatments. In addition, increased level in proline content were obtained at different cryopreservation stages with highest level (5.42 µmole/g F W) recorded at the PVS2 dehydration stage. Fluctuated outcomes were obtained in catalase (CAT), ascorbate peroxidase (APX) and peroxidase (POX) enzyme activities in PLBs exposed to different cryopreservation stages. Lowest values recorded for CAT enzyme activity were obtained at the dehydration stage (3.94 U/g). Lowest POX enzyme activities were obtained at the dehydration (122.36 U/g) and growth recovery (106.40 U/g) stages. Additionally, lowest APX enzyme activities values were recorded at the thawing (7.47 U/g) and unloading (7.28 U/g) stages. These have contributed to low regeneration of Dendrobium Sabin Blue protocorm like bodies (PLBs) following cryopreservation. Hence, in the future experimental design, exogenous antioxidant could be included in the cryopreservation procedures to improve the existing protocol.

Matched MeSH terms: Vitrification
Does Overnight Culture of Cleaved Embryos Improve Pregnancy Rate in Vitrified-Warmed Embryo Transfer Programme?

Agha-Rahimi A, Omidi M, Akyash F, Faramarzi A, Farshchi FA

Malays J Med Sci, 2019 Mar;26(2):52-58.
PMID: 31447608 DOI: 10.21315/mjms2019.26.2.6

Background: Vitrification is a routine procedure in assisted reproductive technique (ART) lab. However, there is widespread variability between protocols of different centres. The aim of this study was to compare the chemical pregnancy, clinical pregnancy and live birth rates between one-day embryo culture and immediate transfer for frozen-thawed embryo transfer (FET) cycles.
Methods: In this cohort retrospective study, 366 FET cycles were divided into two groups: Group A, the embryos were warmed one day before transfer, and were cultured overnight; Group B, the embryos were warmed on the same day of transfer, at least were cultured 1 h before embryo transfer (ET). Chemical and clinical pregnancy and live birth rates were compared between two groups.
Results: The chemical pregnancy was higher in group A than B (37.9% versus 28.9%), but this difference was not significant (P = 0.07). Clinical pregnancy (30.8% versus 24.1%) and live birth (19.8% versus 22.05%) were similar in group A and B, (P = 0.15), and (P = 0.8). Conclusion: In conclusion, overnight culture and confirmation of mitosis resumption was not essential for FET cycles in vitrification method.

Matched MeSH terms: Vitrification
Cryopreservation of Garcinia cowa shoot tips by vitrification: the effects of sucrose preculture and loading treatment on ultrastructural changes in meristematic cells

Yap LV, Noor NM, Clyde MM, Chin HF

Cryo Letters, 2011 May-Jun;32(3):188-96.
PMID: 21766148

The effects of sucrose preculture duration and loading treatment on tolerance of Garcinia cowa shoot tips to cryopreservation using the PVS2 vitrification solution were investigated. Ultrastructural changes in meristematic cells at the end of the preculture and loading steps were followed in an attempt to understand the effects of these treatments on structural changes in cell membranes and organelles. Increasing preculture duration on 0.3 M sucrose medium from 0 to 3 days enhanced tolerance to PVS2 solution from 5.6 percent (no preculture) to 49.2 percent (3-day preculture). However, no survival was observed after cryopreservation. Examination of meristematic cells by transmission electron microscopy revealed the progressive accumulation of an electron-dense substance in line with increasing exposure durations to 0.3 M sucrose preculture. Treatment with a loading solution (2 M glycerol + 0.4 M sucrose) decreased tolerance of shoot tips to PVS2 vitrification solution and had a deleterious effect on the ultrastructure of G. cowa meristematic cells. This study suggests that G. cowa meristematic cells may lose their structural integrity due to exposure to glycerol present in the loading solution at a 2 M concentration, either due to its high osmotic potential, or due to its cytotoxicity.

Matched MeSH terms: Vitrification/drug effects*
Catalase and superoxide dismutase activities and the total protein content of protocorm-like bodies of Dendrobium sonia-28 subjected to vitrification

Poobathy R, Sinniah UR, Xavier R, Subramaniam S

Appl Biochem Biotechnol, 2013 Jul;170(5):1066-79.
PMID: 23640259 DOI: 10.1007/s12010-013-0241-z

Dendrobium sonia-28 is an important ornamental orchid in the Malaysian flower industry. However, the genus faces both low germination rates and the risk of producing heterozygous progenies. Cryopreservation is currently the favoured long-term storage method for orchids with propagation problems. Vitrification, a frequently used cryopreservation technique, involves the application of pretreatments and cryoprotectants to protect and recover explants during and after storage in liquid nitrogen. However, cryopreservation may cause osmotic injuries and toxicity to cryopreserved explants from the use of highly concentrated additives, and cellular injuries from thawing, devitrification and ice formation. Reactive oxygen species (ROS), occurring during dehydration and cryopreservation, may also cause membrane damage. Plants possess efficient antioxidant systems such as the superoxide dismutase (SOD) and catalase (CAT) enzymes to scavenge ROS during low temperature stress. In this study, protocorm-like bodies (PLBs) of Dendrobium sonia-28 were assayed for the total protein content, and both SOD and CAT activities, at each stage of a vitrification exercise to observe for deleterious stages in the protocol. The results indicated that cryopreserved PLBs of Dendrobium sonia-28 underwent excessive post-thawing oxidative stress due to decreased levels of the CAT enzyme at the post-thawing recovery stage, which contributed to the poor survival rates of the cryopreserved PLBs.

Matched MeSH terms: Vitrification
Cryopreservation of Human Mesenchymal Stem Cells for Clinical Applications: Current Methods and Challenges

Yong KW, Wan Safwani WK, Xu F, Wan Abas WA, Choi JR, Pingguan-Murphy B

Biopreserv Biobank, 2015 Aug;13(4):231-9.
PMID: 26280501 DOI: 10.1089/bio.2014.0104

Mesenchymal stem cells (MSCs) hold many advantages over embryonic stem cells (ESCs) and other somatic cells in clinical applications. MSCs are multipotent cells with strong immunosuppressive properties. They can be harvested from various locations in the human body (e.g., bone marrow and adipose tissues). Cryopreservation represents an efficient method for the preservation and pooling of MSCs, to obtain the cell counts required for clinical applications, such as cell-based therapies and regenerative medicine. Upon cryopreservation, it is important to preserve MSCs functional properties including immunomodulatory properties and multilineage differentiation ability. Further, a biosafety evaluation of cryopreserved MSCs is essential prior to their clinical applications. However, the existing cryopreservation methods for MSCs are associated with notable limitations, leading to a need for new or improved methods to be established for a more efficient application of cryopreserved MSCs in stem cell-based therapies. We review the important parameters for cryopreservation of MSCs and the existing cryopreservation methods for MSCs. Further, we also discuss the challenges to be addressed in order to preserve MSCs effectively for clinical applications.

Matched MeSH terms: Vitrification
Fulltext Vitrification of Blastocyst Murine embryos affects PI3K pathway by modulating the expression of XIAP and S6K1 proteins

Mohd Fazirul, M., Sharaniza, A.R., Norhazlin, J.M.Y., Wan Hafizah, W.J., Razif, D., Froemming, G.R.A., et al.

Pertanika Journal of Science & Technology, 2017;25(108):187-198.
MyJurnal

Cryopreservation by vitrification has been widely used in Assisted Reproductive Technology (ART) to preserve embryos for an extended period of time. However, the effect of vitrification on development of the embryos is lacking. Therefore, understanding on vitrification effects on embryonic proteins, especially those involved in preimplantation development is crucial to provide high quality embryos for further usage. In this study, XIAP and S6K1 protein expressions following vitrification was investigated, since they have been implicated in diverse cellular processes including cell growth, migration, proliferation, differentiation, survival and development of preimplantation embryos via the PI3K pathway. Embryos were obtained from superovulated female ICR mice which were mated with fertile males. The embryos were harvested at the 2-cell stage and cultured until blastocyst stage. Blastocysts were then vitrified in ESF40 cryoprotectant. Western blot was carried out to determine the expression of XIAP and S6K1 proteins. The results showed the expression of XIAP and S6K1 significantly decreased in vitrified blastocyst compared to the control. This indicates that blastocyst vitrification may impact developmental competence through the activation of apoptotic pathways.

Matched MeSH terms: Vitrification
Higher β-HCG concentrations and higher birthweights ensue from single vitrified embryo transfers

Keane KN, Mustafa KB, Hinchliffe P, Conceicao J, Yovich JL

Reprod Biomed Online, 2016 Aug;33(2):149-60.
PMID: 27209497 DOI: 10.1016/j.rbmo.2016.04.014

To examine the effect of cryopreservation on developmental potential of human embryos, this study compared quantitative β-HCG concentrations at pregnancy test after IVF-fresh embryo transfer (IVF-ET) with those arising after frozen embryo transfer (FET). It also tracked outcomes of singleton pregnancies resulting from single-embryo transfers that resulted in singleton live births (n = 869; with 417 derived from IVF-ET and 452 from FET). The initial serum β-HCG concentration indicating successful implantation was measured along with the birthweight of the ensuing infants. With testing at equivalent luteal phase lengths, the median pregnancy test β-HCG was significantly higher following FET compared with fresh IVF-ET (844.5 IU/l versus 369 IU/l; P < 0.001). Despite no significant difference in the average period of gestation (38 weeks 5 days for both groups), the mean birthweight of infants born following FET was significantly heavier by 161 g (3370 g versus 3209 g; P < 0.001). Furthermore, more infants exceeded 4000 g (P < 0.001) for FET although there was no significant difference for the macrosomic category (≥4500 g). We concluded that FET programme embryos lead to infants with equivalent (if not better) developmental potential compared with IVF-ET, demonstrated by higher pregnancy β-HCG concentrations and ensuing birthweights.

Matched MeSH terms: Vitrification
Biobanking of Human Mesenchymal Stem Cells: Future Strategy to Facilitate Clinical Applications

Yong KW, Choi JR, Wan Safwani WK

Adv Exp Med Biol, 2016;951:99-110.
PMID: 27837557

Human mesenchymal stem cells (hMSCs), a type of adult stem cells that hold great potential in clinical applications (e.g., regenerative medicine and cell-based therapy) due to their ability to differentiate into multiple types of specialized cells and secrete soluble factors which can initiate tissue repair and regulate immune response. hMSCs need to be expanded in vitro or cryopreserved to obtain sufficient cell numbers required for clinical applications. However, long-term in vitro culture-expanded hMSCs may raise some biosafety concerns (e.g., chromosomal abnormality and malignant transformation) and compromised functional properties, limiting their use in clinical applications. To avoid those adverse effects, it is essential to cryopreserve hMSCs at early passage and pool them for off-the-shelf use in clinical applications. However, the existing cryopreservation methods for hMSCs have some notable limitations. To address these limitations, several approaches have to be taken in order to produce healthy and efficacious cryopreserved hMSCs for clinical trials, which remains challenging to date. Therefore, a noteworthy amount of resources has been utilized in research in optimization of the cryopreservation methods, development of freezing devices, and formulation of cryopreservation media to ensure that hMSCs maintain their therapeutic characteristics without raising biosafety concerns following cryopreservation. Biobanking of hMSCs would be a crucial strategy to facilitate clinical applications in the future.

Matched MeSH terms: Vitrification

Filters

Please provide feedback to Administrator ([email protected])

External Links