Displaying all 18 publications

Abstract:
Sort:
  1. Leong TK, Zakuan N, Mat Saman MZ, Ariff MS, Tan CS
    ScientificWorldJournal, 2014;2014:591361.
    PMID: 24701182 DOI: 10.1155/2014/591361
    This paper proposed seven existing and new performance indicators to measure the effectiveness of quality management system (QMS) maintenance and practices in construction industry. This research is carried out with a questionnaire based on QMS variables which are extracted from literature review and project performance indicators which are established from project management's theory. Data collected was analyzed using correlation and regression analysis. The findings indicate that client satisfaction and time variance have positive and significant relationship with QMS while other project performance indicators do not show significant results. Further studies can use the same project performance indicators to study the effectiveness of QMS in different sampling area to improve the generalizability of the findings.
    Matched MeSH terms: Total Quality Management*
  2. Mohammed Saleh Alosani, Rushami Zien Yusoff, Ali Musaed Alansi
    MyJurnal
    Improving organizational performance is the main objective of any organization. Six
    Sigma is one of the most important approaches to improve performance and sustain
    competitive advantage. This article reviewed the literature related to organizational
    performance and explains the potential impact of Six Sigma and innovation culture on
    organizational performance. Given that previous studies have reported inconclusive
    results, this paper tries to establish a mechanism to explain the role of Six Sigma in
    improving organizational performance. Therefore, based on the theoretical foundation
    and comprehensive review of previous literature, a research framework is proposed.
    This proposed framework is grounded in the implementation of Six Sigma projects; it
    also establishes that innovation culture can help organizations to achieve success in a
    turbulent business environment.
    Matched MeSH terms: Total Quality Management
  3. Manaf NH
    PMID: 15974516
    The main aim of the study is to provide an empirical analysis of quality management practice among Malaysian Ministry of Health hospital employees, ranging from medical specialists to health attendants.
    Matched MeSH terms: Total Quality Management/organization & administration*
  4. Abdul-Rahman H, Berawi MA
    Qual Assur, 2001;9(1):5-30.
    PMID: 12465710
    Knowledge Management (KM) addresses the critical issues of organizational adoption, survival and competence in the face of an increasingly changing environment. KM embodies organizational processes that seek a synergistic combination of the data and information processing capabilities of information and communication technologies (ICT), and the creative and innovative capacity of human beings to improve ICT In that role, knowledge management will improve quality management and avoid or minimize losses and weakness that usually come from poor performance as well as increase the competitive level of the company and its ability to survive in the global marketplace. To achieve quality, all parties including the clients, company consultants, contractors, entrepreneurs, suppliers, and the governing bodies (i.e., all involved stake-holders) need to collaborate and commit to achieving quality. The design based organizations in major business and construction companies have to be quality driven to support healthy growth in today's competitive market. In the march towards vision 2020 and globalization (i.e., the one world community) of many companies, their design based organizations need to have superior quality management and knowledge management to anticipate changes. The implementation of a quality system such as the ISO 9000 Standards, Total Quality Management, or Quality Function Deployment (QFD) focuses the company's resources towards achieving faster and better results in the global market with less cost. To anticipate the needs of the marketplace and clients as the world and technology change, a new system, which we call Power Quality System (PQS), has been designed. PQS is a combination of information and communication technologies (ICT) and the creative and innovative capacity of human beings to meet the challenges of the new world business and to develop high quality products.
    Publication year= 2001 Jan-2002 Mar
    Matched MeSH terms: Total Quality Management/organization & administration*; Total Quality Management/standards
  5. Ahmed S, Abd Manaf NH, Islam R
    Int J Health Care Qual Assur, 2018 Oct 08;31(8):973-987.
    PMID: 30415620 DOI: 10.1108/IJHCQA-07-2017-0138
    PURPOSE: The purpose of this paper is to investigate the effects of Lean Six Sigma (LSS) and workforce management on the quality performance of Malaysian hospitals. This paper also investigates the direct and indirect relationships between top management commitment and quality performance of the healthcare organisations in Malaysia.

    DESIGN/METHODOLOGY/APPROACH: This study applied stratified random sampling to collect data from 15 different hospitals in Peninsular Malaysia. The self-administered survey questionnaires were distributed among 673 hospital staff (i.e. doctors, nurses, pharmacists, and medical laboratory technologists) to obtain 335 useful responses with a 49.47 per cent valid response rate. The research data were analysed based on confirmatory factor analysis and structural equation modelling by using AMOS version 23 software.

    FINDINGS: The research findings indicated that LSS and workforce management have a significant impact on quality performance of the Malaysian hospitals, whereas senior management commitment was found to have an insignificant relationship with quality performance. The research findings indicate that senior management commitment has no direct significant relationship with quality performance, but it has an indirect significant relationship with quality performance through the mediating effects of LSS and workforce management.

    RESEARCH LIMITATIONS/IMPLICATIONS: This research focussed solely on healthcare organisations in Malaysia and thus the results might not be applicable for other countries as well as other service organisations.

    ORIGINALITY/VALUE: This research provides theoretical, methodological, and practical contributions for the LSS approach and the research findings are expected to provide guidelines to enhance the level of quality performance in healthcare organisations in Malaysia as well as other countries.

    Matched MeSH terms: Total Quality Management/organization & administration*; Total Quality Management/standards
  6. Alzoubi MM, Hayati KS, Rosliza AM, Ahmad AA, Al-Hamdan ZM
    Risk Manag Healthc Policy, 2019;12:167-177.
    PMID: 31576185 DOI: 10.2147/RMHP.S197038
    Background: Synergistic integration of predictors and elements that determine the success of total quality management (TQM) implementations in hospitals has been the bane of theoretical development in the TQM research area. Thus, this paper aims to offer a systematic literature review to provide a foundation on which research on TQM can be built and to identify the predictors of successful TQM in the health-care context.

    Materials and methods: A systematic literature survey was adopted in this paper, involving the review of 25 relevant researched articles found in the databases Science Direct, EBSCO, MEDLINE, CINAHL and PubMed.

    Result: The systematic literature survey reveals five variables to be core predictors of TQM, signifying how important these variables are in the successful implementation of TQM in the health-care context. Also, it is revealed that the identified core predictors have positive effects on an improved health-care system. However, the systematic survey of the literature reveals a dearth of studies on TQM in the health-care context.

    Conclusion: As TQM has become an important management approach for advancing effectiveness in the health-care sector, this kind of research is of value to researchers and managers. Stakeholders in the health sectors should introduce and implement TQM in hospitals and clinics. Nevertheless, this study has limitations, including that the databases and search engines adopted for the literature search are not exhaustive.

    Matched MeSH terms: Total Quality Management
  7. Talib, H.H.A., Ali, K.A.M., Idris, F.
    MyJurnal
    Previous literatures have demonstrated a significant research gap in terms of the quality of the management practices in the organizational performances of the SMEs particularly in the food processing industry in Malaysia. Subsequently, an exploratory study is conducted to verify the proposed critical success factors (CSF) and the model constructs for SMEs in the Malaysian
    food industry that is in line with these practices. Therefore, the purpose of this paper is to identify CSF of quality management practices of the Small and Medium Enterprises (SMEs) in the Malaysian food industry and to develop a conceptual framework of quality management practices based on the Total Quality Management (TQM) in relation to the organizational performance of the SMEs in the food processing industry in Malaysia. The quality management framework consists of leadership, corporate planning, human resource management, customer focus, supplier focus, information management, process management and quality assurance as the CSF. Finding from the exploratory study has supported the proposed constructs and results show that the instrument is reliable in measuring the construct. Thus, this study is important to support the SMEs in the food processing industry in Malaysia to manage and prioritize the implementation of QM in order to improve the organizational performance.
    Matched MeSH terms: Total Quality Management
  8. Juahir H, Ismail A, Mohamed SB, Toriman ME, Kassim AM, Zain SM, et al.
    Mar Pollut Bull, 2017 Jul 15;120(1-2):322-332.
    PMID: 28535957 DOI: 10.1016/j.marpolbul.2017.04.032
    This study involves the use of quality engineering in oil spill classification based on oil spill fingerprinting from GC-FID and GC-MS employing the six-sigma approach. The oil spills are recovered from various water areas of Peninsular Malaysia and Sabah (East Malaysia). The study approach used six sigma methodologies that effectively serve as the problem solving in oil classification extracted from the complex mixtures of oil spilled dataset. The analysis of six sigma link with the quality engineering improved the organizational performance to achieve its objectivity of the environmental forensics. The study reveals that oil spills are discriminated into four groups' viz. diesel, hydrocarbon fuel oil (HFO), mixture oil lubricant and fuel oil (MOLFO) and waste oil (WO) according to the similarity of the intrinsic chemical properties. Through the validation, it confirmed that four discriminant component, diesel, hydrocarbon fuel oil (HFO), mixture oil lubricant and fuel oil (MOLFO) and waste oil (WO) dominate the oil types with a total variance of 99.51% with ANOVA giving Fstat>Fcritical at 95% confidence level and a Chi Square goodness test of 74.87. Results obtained from this study reveals that by employing six-sigma approach in a data-driven problem such as in the case of oil spill classification, good decision making can be expedited.
    Matched MeSH terms: Total Quality Management
  9. Aoun M, Hasnan N, Al-Aaraj H
    East Mediterr Health J, 2018 Jun 10;24(3):269-276.
    PMID: 29908022 DOI: 10.26719/2018.24.3.269
    Background: Lean practices are critical to eliminate waste and enhance the quality of healthcare services through different improvement approaches of total quality management (TQM). In particular, the soft side of TQM is used to develop the innovation skills of employees that are essential for the continuous improvement strategies of hospitals.

    Aim: The main objective was to study the relationship between lean practices, soft TQM and innovation skills in Lebanese hospitals.

    Methods: A quantitative methodology was applied by surveying 352 employees from private and public hospitals in Lebanon. The primary collected data were valid and reliable when analysed by SPSS and AMOS software as a part of structural equation modelling.

    Results: Lean practices significantly influenced the innovation skills; however, soft TQM did not mediate this relationship because it was not well implemented, especially at the level of people-based management and continuous improvement.

    Conclusion: This study has implications for healthcare practitioners to make greater efforts to implement lean practices and soft TQM. Future studies are suggested to highlight different challenges facing quality improvement in the Region.

    Matched MeSH terms: Total Quality Management
  10. Yusof MM, Khodambashi S, Mokhtar AM
    PMID: 23259846 DOI: 10.1186/1472-6947-12-150
    There are numerous applications for Health Information Systems (HIS) that support specific tasks in the clinical workflow. The Lean method has been used increasingly to optimize clinical workflows, by removing waste and shortening the delivery cycle time. There are a limited number of studies on Lean applications related to HIS. Therefore, we applied the Lean method to evaluate the clinical processes related to HIS, in order to evaluate its efficiency in removing waste and optimizing the process flow. This paper presents the evaluation findings of these clinical processes, with regards to a critical care information system (CCIS), known as IntelliVue Clinical Information Portfolio (ICIP), and recommends solutions to the problems that were identified during the study.
    Matched MeSH terms: Total Quality Management/methods*
  11. Awang Kalong N, Yusof M
    Int J Health Care Qual Assur, 2017 May 08;30(4):341-357.
    PMID: 28470137 DOI: 10.1108/IJHCQA-06-2016-0082
    Purpose The purpose of this paper is to discuss a systematic review on waste identification related to health information systems (HIS) in Lean transformation. Design/methodology/approach A systematic review was conducted on 19 studies to evaluate Lean transformation and tools used to remove waste related to HIS in clinical settings. Findings Ten waste categories were identified, along with their relationships and applications of Lean tool types related to HIS. Different Lean tools were used at the early and final stages of Lean transformation; the tool selection depended on the waste characteristic. Nine studies reported a positive impact from Lean transformation in improving daily work processes. The selection of Lean tools should be made based on the timing, purpose and characteristics of waste to be removed. Research limitations/implications Overview of waste and its category within HIS and its analysis from socio-technical perspectives enabled the identification of its root cause in a holistic and rigorous manner. Practical implications Understanding waste types, their root cause and review of Lean tools could subsequently lead to the identification of mitigation approach to prevent future error occurrence. Originality/value Specific waste models for HIS settings are yet to be developed. Hence, the identification of the waste categories could guide future implementation of Lean transformations in HIS settings.
    Matched MeSH terms: Total Quality Management/organization & administration*
  12. Jairaman J, Sakiman Z, Li LS
    Clin. Lab. Med., 2017 Mar;37(1):163-176.
    PMID: 28153364 DOI: 10.1016/j.cll.2016.09.013
    Sunway Medical Centre (SunMed) implemented Six Sigma, measurement uncertainty, and risk management after the CLSI EP23 Individualized Quality Control Plan approach. Despite the differences in all three approaches, each implementation was beneficial to the laboratory, and none was in conflict with another approach. A synthesis of these approaches, built on a solid foundation of quality control planning, can help build a strong quality management system for the entire laboratory.
    Matched MeSH terms: Total Quality Management*
  13. Ahmed ES, Ahmad MN, Othman SH
    Int J Health Care Qual Assur, 2019 Jun 10;32(5):887-908.
    PMID: 31195926 DOI: 10.1108/IJHCQA-07-2017-0116
    PURPOSE: According to the literature concerned with this study, less than satisfactory outcomes have been achieved through implementing business process improvements methods (BPIMs) in industries, in general, and in healthcare, in particular. The existing methods used need to be enhanced in order to create more effective outcomes. There has also been a lack of studies documenting gaps or shortfalls in implementing BPIMs, to be presented to the BPI research community. Therefore, researchers of this paper have attempted to fill gaps between theory and practice. On the contrary, there is also a need to link practical outcomes in the healthcare domain with those of the BPI research community. The purpose of this paper is to review popular BPIMs, techniques and tools applied in the healthcare domain; it seeks to examine and highlight their significant roles, clarify their pros and cons, and find opportunities to enhance their impact on the achievement of more sustainable improvements in the healthcare domain.

    DESIGN/METHODOLOGY/APPROACH: This study has been carried out by using a methodology combining an in-depth literature review with a comparison framework, which is called as the "Framework for Comparing Business Process Improvement Methods." The framework is composed of seven dimensions and has been adapted from four recognized, related frameworks. In addition to the in-depth review of related literature and the adapted comparison framework, researchers have conducted several interviews with healthcare BPI practitioners in different hospitals, to attain their opinions of BPI methods and tools used in their practices.

    FINDINGS: The main results have indicated that significant improvements have been achieved by implementing BPIMs in the healthcare domain according to related literature. However, there were some shortfalls in the existing methods that need to be resolved. The most important of these has been the shortfall in representing and analyzing targeted domain knowledge during improvement phases. The tool currently used for representing the domain, specifically flowcharts, is very abstract and does not present the domain in a clear form. The flowchart tool also fails to clearly present the separation of concerns between business processes and the information systems processes that support a business in a given domain.

    PRACTICAL IMPLICATIONS: The findings of this study can be useful for BPI practitioners and researchers, mainly within the healthcare domain. The findings can help these groups to understand BPIMs shortfalls and encourage them to consider how BPIMs can be potentially improved.

    ORIGINALITY/VALUE: This researchers of this paper have proposed a comparison framework for highlighting popular BPIMs in the healthcare domain, along with their uses and shortfalls. In addition, they have conducted a deep literature review based on the practical results obtained from different healthcare institutions implementing unique BPIMs around the world. There has also been valuable interview feedback attained from BPI leaders of specific hospitals in Saudi Arabia. This combination is expected to contribute to knowledge of BPIMs from both theoretical and practical points of view.

    Matched MeSH terms: Total Quality Management
  14. Alzoubi MM, Ks H, Am R, Al-Zoubi KM, Al-Mugheed K, Alsenany SA, et al.
    Medicine (Baltimore), 2023 Oct 06;102(40):e35390.
    PMID: 37800832 DOI: 10.1097/MD.0000000000035390
    BACKGROUND: The purpose of this study is to design, implement, and evaluate the impact of a total quality management intervention on job performance and commitment among Jordanian nurses working in government hospitals.

    METHODS: A quasi-experimental multiple time series was conducted starting in September 2017 and ending in June 2018. 140 nurses were sampled using the proportionate stratified random sampling technique; 132 were completed the study 67 the intervention group, while 65 in the control group.

    RESULTS: There were no significant differences in nurses' job performance or commitment between the 2 groups (control and intervention). A repeated measure MANOVA test for both groups revealed that the interaction between group and time was statistically significant (F (4, 127) = 144.841; P = .001; Wilk's Λ = 0.180; η2 = .820), indicating that groups had a significantly different pattern of job performance and commitment over time. A repeated test The MANCOVA test for both groups across time revealed significant differences in nurses' job performance and nurses' commitment at a less than 0.05 significance level (F (2127) = 320.724; P = .001; Wilk's Λ = 0.165; η2 = 0.835), and the overall effect of time was significant for all dependent variables (F (4125) = 36.879; P = .001; Wilk's Λ = 0.459; η2 = 0.541).

    CONCLUSION: The educational intervention was effective in improving nursing job performance among the study sample. The improved commitment of respondents in the intervention group was attributed to the improvement in job performance.

    Matched MeSH terms: Total Quality Management
  15. Moradi F, Aryankhesal A, Heidari M, Soroush A, Sadr SR
    Malays J Med Sci, 2019 Sep;26(5):21-37.
    PMID: 31728116 DOI: 10.21315/mjms2019.26.5.3
    Caesarean section without medical indication imposes many problems to families, personnel and medical equipment causing some side effects to pregnant woman and foetus, compared to natural childbirth. The present study aimed to evaluate the interventions in reducing caesarean section in the world. This study was a systematic review using Embase, PubMed, Scopus, Web of Science, Science Direct, Magiran and SID databases and grey literature. All studies conducted during 2000-2018 were reviewed and finally the studies with inclusion and exclusion criteria were selected. A total of 19 studies were selected among 5,559 studies. The interventions conducted for reducing caesarean section included training the specialists and women by using Six Sigma method, changing the guidelines, reviewing the definition of natural childbirth various stages, encouraging the natural childbirth and expanding painless childbirth. All interventions were divided into educational strategy and managerial strategy. The interventions can be implemented to change the behaviour of physicians and attitude of pregnant women in order to reduce caesarean section. In this regard, the authorities are recommended to make more efforts.
    Matched MeSH terms: Total Quality Management
  16. Loh KY
    Int J Palliat Nurs, 2006 Jan;12(1):38-41.
    PMID: 16493304 DOI: 10.12968/ijpn.2006.12.1.20396
    AIM: To document the perception of terminally ill patients and their family members on the care provided to them, and to look at the components of holistic care that are viewed as inadequate.
    METHODS: Thirty cancer patients from a 10-bed palliative ward and their family members who were the chief carers were interviewed. They were asked to give their perceptions on four major areas of care: physical, social, psychological and spiritual. The participants were asked to report which area(s) of the service were inadequate.
    RESULTS: Most patients and family members perceived that they received adequate physical care. However, the psychosocial and spiritual aspect of care were perceived as inadequate by the majority of patients and their families. None of the patients interviewed had ever been asked about spiritual distress.
    CONCLUSION: The holistic model of care in caring for terminally ill patients is not practised fully. Further development in the psychosocial and spiritual aspects of care is necessary. There is a need to conduct further research to address these domains.
    Matched MeSH terms: Total Quality Management/organization & administration
  17. Azila NM, Tan CP
    Med J Malaysia, 2005 Aug;60 Suppl D:35-40.
    PMID: 16315622
    Accreditation is a process by which official accrediting bodies evaluate institutions using a set of criteria and standards, following established procedures, to ensure a high quality of education needed to produce highly competent graduates. Additional objectives include (1) ensuring quality institutional functioning, (2) strengthening capabilities of educational institutions for service to the nation and (3) improving public confidence in medical schools. The accreditation process provides an opportunity for the institution to critically reflect upon all the aspects of its programme and the level of compliance or attainment of the requirements. The self-evaluation exercise, which identifies strengths and weaknesses, is perceived as formative. It is envisaged that eventually institutions will adopt a learning culture for curriculum development, implementation, monitoring and matching the outcomes. In conclusion, periodic accreditation activities can act as a "monitoring" system to ensure that the quality of medical education is maintained according to established standards.
    Matched MeSH terms: Total Quality Management
  18. Lim TO, Soraya A, Ding LM, Morad Z
    Int J Qual Health Care, 2002 Jun;14(3):251-8.
    PMID: 12108535
    Quality assurance of medical practice requires assessment of doctors' performance, whether informally via a system such as peer review or more formally via one such as credentialing. Current methods of assessment are, however, subjective or implicit. More objective methods of assessment based on statistical process control technique such as cumulative sum (CUSUM) procedure may be helpful.
    Matched MeSH terms: Total Quality Management
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links