Displaying publications 1 - 20 of 1074 in total

Abstract:
Sort:
  1. Fulltext The function of microbial enzymes in breaking down soil contaminated with pesticides: a review
    Chia XK, Hadibarata T, Kristanti RA, Jusoh MNH, Tan IS, Foo HCY
    Bioprocess Biosyst Eng, 2024 May;47(5):597-620.
    PMID: 38456898 DOI: 10.1007/s00449-024-02978-6
    The use of pesticides and the subsequent accumulation of residues in the soil has become a worldwide problem. Organochlorine (OC) pesticides have spread widely in the environment and caused contamination from past agricultural activities. This article reviews the bioremediation of pesticide compounds in soil using microbial enzymes, including the enzymatic degradation pathway and the recent development of enzyme-mediated bioremediation. Enzyme-mediated bioremediation is divided into phase I and phase II, where the former increases the solubility of pesticide compounds through oxidation-reduction and hydrolysis reactions, while the latter transforms toxic pollutants into less toxic or nontoxic products through conjugation reactions. The identified enzymes that can degrade OC insecticides include dehalogenases, phenol hydroxylase, and laccases. Recent developments to improve enzyme-mediated bioremediation include immobilization, encapsulation, and protein engineering, which ensure its stability, recyclability, handling and storage, and better control of the reaction.
    Matched MeSH terms: Soil/chemistry; Soil Microbiology*
  2. Peat soil bulk density important for estimation of peatland fire emissions
    Wijedasa LS
    Glob Chang Biol, 2016 09;22(9):2959.
    PMID: 27195773 DOI: 10.1111/gcb.13364
    Matched MeSH terms: Soil*
  3. Relationship between shear strength and soil water characteristic curve of an unsaturated granitic residual soil
    Huat, Bujang B.K, Faisal Ali, Hashim, S.
    Pertanika Journal of Science & Technology, 2007;15(2):113-120.
    MyJurnal
    The three shear strength parameters that are required to define a failure envelope of an unsaturated soil are c' (apparent cohesion),
    Matched MeSH terms: Soil
  4. Soil Geobacteraceae are the key predictors of neurotoxic methylmercury bioaccumulation in rice
    Zhong H, Tang W, Li Z, Sonne C, Lam SS, Zhang X, et al.
    Nat Food, 2024 Apr;5(4):301-311.
    PMID: 38605129 DOI: 10.1038/s43016-024-00954-7
    Contamination of rice by the potent neurotoxin methylmercury (MeHg) originates from microbe-mediated Hg methylation in soils. However, the high diversity of Hg methylating microorganisms in soils hinders the prediction of MeHg formation and challenges the mitigation of MeHg bioaccumulation via regulating soil microbiomes. Here we explored the roles of various cropland microbial communities in MeHg formation in the potentials leading to MeHg accumulation in rice and reveal that Geobacteraceae are the key predictors of MeHg bioaccumulation in paddy soil systems. We characterized Hg methylating microorganisms from 67 cropland ecosystems across 3,600 latitudinal kilometres. The simulations of a rice-paddy biogeochemical model show that MeHg accumulation in rice is 1.3-1.7-fold more sensitive to changes in the relative abundance of Geobacteraceae compared to Hg input, which is recognized as the primary parameter in controlling MeHg exposure. These findings open up a window to predict MeHg formation and accumulation in human food webs, enabling more efficient mitigation of risks to human health through regulations of key soil microbiomes.
    Matched MeSH terms: Soil/chemistry; Soil Microbiology*
  5. Aluminium removal and recovery from wastewater and soil using isolated indigenous bacteria
    Purwanti IF, Kurniawan SB, Ismail N', Imron MF, Abdullah SRS
    J Environ Manage, 2019 Nov 01;249:109412.
    PMID: 31445374 DOI: 10.1016/j.jenvman.2019.109412
    This paper elucidates the capability of isolated indigenous bacteria to remove aluminium from wastewater and soil. Two indigenous species of Brochothrix thermosphacta and Vibrio alginolyticus were isolated from an aluminium-contaminated site. These two species were used to treat aluminium-containing wastewater and contaminated soil using the bioaugmentation method. B. thermosphacta showed the highest aluminium removal of 57.87 ± 0.45% while V. alginolyticus can remove aluminium up to 59.72 ± 0.33% from wastewater. For aluminium-contaminated soil, B. thermosphacta and V. alginolyticus, showed a highest removal of only 4.58 ± 0.44% and 5.48 ± 0.58%, respectively. The bioaugmentation method is more suitable to be used to treat aluminium in wastewater compared to contaminated soil. The produced biomass separation after wastewater treatment was so much easier and applicable, compared to the produced biomass handling from contaminated soil treatment. A 48.55 ± 2.45% and 40.12 ± 4.55% of aluminium can be recovered from B. thermosphacta and V. alginolyticus biomass, respectively, with 100 mg/L initial aluminium concentration in wastewater.
    Matched MeSH terms: Soil; Soil Pollutants*
  6. Fulltext Frequency distribution of foliar nickel is bimodal in the ultramafic flora of Kinabalu Park (Sabah, Malaysia)
    van der Ent A, Echevarria G, Nkrumah PN, Erskine PD
    Ann Bot, 2020 10 30;126(6):1017-1027.
    PMID: 32597938 DOI: 10.1093/aob/mcaa119
    BACKGROUND AND AIMS: The aim of this study was to test the frequency distributions of foliar elements from a large dataset from Kinabalu Park (Sabah, Malaysia) for departure from unimodality, indicative of a distinct ecophysiological response associated with hyperaccumulation.

    METHODS: We collected foliar samples (n = 1533) comprising 90 families, 198 genera and 495 plant species from ultramafic soils, further foliar samples (n = 177) comprising 45 families, 80 genera and 120 species from non-ultramafic soils and corresponding soil samples (n = 393 from ultramafic soils and n = 66 from non-ultramafic soils) from Kinabalu Park (Sabah, Malaysia). The data were geographically (Kinabalu Park) and edaphically (ultramafic soils) constrained. The inclusion of a relatively high proportion (approx. 14 %) of samples from hyperaccumulator species [with foliar concentrations of aluminium and nickel (Ni) >1000 μg g-1, cobalt, copper, chromium and zinc >300 μg g-1 or manganese (Mn) >10 mg g-1] allowed for hypothesis testing.

    KEY RESULTS: Frequency distribution graphs for most elements [calcium (Ca), magnesium (Mg) and phosphorus (P)] were unimodal, although some were skewed left (Mg and Mn). The Ni frequency distribution was bimodal and the separation point for the two modes was between 250 and 850 μg g-1.

    CONCLUSIONS: Accounting for statistical probability, the established empirical threshold value (>1000 μg g-1) remains appropriate. The two discrete modes for Ni indicate ecophysiologically distinct behaviour in plants growing in similar soils. This response is in contrast to Mn, which forms the tail of a continuous (approximately log-normal) distribution, suggestive of an extension of normal physiological processes.

    Matched MeSH terms: Soil; Soil Pollutants*
  7. Effect of walnut shell biochars on soil quality, crop yields, and weed dynamics in a 4-year field experiment
    Safaei Khorram M, Zhang G, Fatemi A, Kiefer R, Mahmood A, Jafarnia S, et al.
    Environ Sci Pollut Res Int, 2020 May;27(15):18510-18520.
    PMID: 32198685 DOI: 10.1007/s11356-020-08335-w
    The introduction of biochar has been extensively tested under short-term greenhouse or field studies mainly in sandy or acidic soils, while its effects on soil properties, crop plants, and weed species especially in neutral or alkaline soils are still not well understood. Therefore, this study focused on relatively long effects of two walnut shell biochars (5 t ha-1) on soil nutrient dynamics, two crop plants (wheat and lentil) growth and developments, and weed growth dynamics over 4 years (2014-2017). Applied biochar added once at the beginning of the experiment while planted crops were supplied with macro-nutrients and sprayed with pesticides according to conventional requirements of the region. Biochars improved soil properties by 10-23% during the first and second years while positive effects of biochars on weed growth were drastically higher (60-78% higher weed density) during the whole period of this study most likely due to increase in bioavailability of nutrient shortly after biochar amendment and indirect positive effects of biochars on soil physical properties as well. Consequently, biochar macro- and micro-nutrient will be utilized by weed plants with higher efficacy compared with crop plants.
    Matched MeSH terms: Soil; Soil Pollutants/analysis*
  8. Fulltext Autochthonous bioaugmentation accelerates phenanthrene degradation in acclimated soil
    Gu H, Yan J, Liu Y, Yu X, Feng Y, Yang X, et al.
    Environ Res, 2023 May 01;224:115543.
    PMID: 36822540 DOI: 10.1016/j.envres.2023.115543
    Bioaugmentation helps to obtain a microbiome capable of remediating polycyclic aromatic hydrocarbons (PAHs). In this study, acclimation of microorganisms to soil supplemented with phenanthrene (PHE) led to enrichment with PAH-degraders, including those in Actinobacteriota and in the genera Streptomyces, Rhodococcus, Nocardioides, Sphingomonas, and Mycobacterium. Aqueous (28 °C, pH 6.5) and soil cultures inoculated with PHE-acclimated soil showed a high PHE (ca. 50 mg L-1) degradation efficiency. The PHE degradation kinetics in aqueous and soil incubations fitted to the Gompertz equation and the first-order kinetic equation, respectively. Indigenous microorganisms adapted to PHE in their environment, and this increased their capacity to degrade PHE. The effect of co-contaminants and pathway intermediates on PHE degradation showed that the degradation of PHE improved in the presence of diesel while being hindered by lubricant oil, catechol, salicylic and phthalic acid. Our findings provide theoretical and practical support for bioremediationof PAHs in the environment.
    Matched MeSH terms: Soil/chemistry; Soil Microbiology
  9. Current Trends on the Effects of Metal-Based Nanoparticles on Microbial Ecology
    Rawat J, Kumar V, Ahlawat P, Tripathi LK, Tomar R, Kumar R, et al.
    Appl Biochem Biotechnol, 2023 Oct;195(10):6168-6182.
    PMID: 36847986 DOI: 10.1007/s12010-023-04386-0
    The growing field of nanotechnology and its many applications have led to the irregular release of nanoparticles (NPs), with unintended effects on the environment and continued contamination of water bodies. Metallic NPs are used more frequently in extreme environmental conditions due to their higher efficiency, which attracts more attention in various applications. Due to improper pre-treatment of biosolids, inefficient wastewater treatment practices, and other unregulated agricultural practices continue to contaminate the environment. In particular, the uncontrolled use of NPs in various industrial applications has led to damage to the microbial flora and caused irreplaceable damage to animals and plants. This study focuses on the effect of different doses, types, and compositions of NP on the ecosystem. The review also mentions the impact of various metallic NPs on microbial ecology, their interactions with microorganisms, ecotoxicity studies, and dosage evaluation of the NPs, mainly focused on the review article. However, further research is still needed to understand the complexity of interactions between NPs and microbes in soil and aquatic ecosystems.
    Matched MeSH terms: Soil; Soil Pollutants*
  10. The application of surfactant colloidal gas aphrons to remediate contaminated soil: A review
    Tao W, Mei C, Hamzah N
    J Contam Hydrol, 2020 May;231:103620.
    PMID: 32126294 DOI: 10.1016/j.jconhyd.2020.103620
    Surfactant solutions have been frequently studied for soil remediation. However, since they are expensive, massive consumption of surfactant solution can constrain their application. Surfactant microbubbles, or colloidal gas aphrons (CGAs), can serve as cost effective alternatives of surfactant solution because the use of CGAs reduce the amount of surfactant consumption. Moreover, CGAs can also improve the contact with the contaminated environment due to their unique surface properties, e.g. containing 40-70% of gas, small size, large interfacial areas, water-like flow properties and buoyant rise velocities. In this review paper, the properties and flow character of CGAs in soil matrix reviewed due to their relevance to soil remediation process. A comprehensive overview of the application of CGAs in flushing off organic pollutants and heavy metals, and carrying oxygen, bacteria and dissolved materials for soil remediation were provided. This paper also highlighted the limitation of CGAs application and important future research scopes.
    Matched MeSH terms: Soil; Soil Pollutants/analysis*
  11. Evaluating the toxicity of polyurethane during marine clay stabilisation
    Saleh S, Ahmad K, Mohd Yunus NZ, Hezmi MA
    Environ Sci Pollut Res Int, 2020 Jun;27(17):21252-21259.
    PMID: 32266626 DOI: 10.1007/s11356-020-08549-y
    In civil engineering, many geotechnical and forensic projects employ polyurethane (PU) for ground improvement, and the results have shown to be effective in terms of time and cost savings. However, similar to many other chemical stabilisers, the use of PU for soil stabilisation may have environmental repercussions. Therefore, this paper utilised a toxicity characteristic leaching procedure (TCLP) to investigate the potential for ground contamination resulting from the application of PU for the stabilisation of marine clay. Furthermore, the hazardousness of PU during the stabilisation of marine clay was investigated by testing its reactivity, ignitability, corrosivity and physical properties. The results reveal that the quantity of heavy metals present in PU is far below the regulatory limits. The results further confirm that PU is odourless and non-corrosive and that it is non-cyanide and non-sulphide-bearing. However, PU is capable of igniting. Overall, the potential application of PU for ground improvement is promising due to its environmental friendliness.
    Matched MeSH terms: Soil; Soil Pollutants/analysis*
  12. A review of the impact of herbicides and insecticides on the microbial communities
    Jeyaseelan A, Murugesan K, Thayanithi S, Palanisamy SB
    Environ Res, 2024 Mar 15;245:118020.
    PMID: 38151149 DOI: 10.1016/j.envres.2023.118020
    Enhancing crop yield to accommodate the ever-increasing world population has become critical, and diminishing arable land has pressured current agricultural practices. Intensive farming methods have been using more pesticides and insecticides (biocides), culminating in soil deposition, negatively impacting the microbiome. Hence, a deeper understanding of the interaction and impact of pesticides and insecticides on microbial communities is required for the scientific community. This review highlights the recent findings concerning the possible impacts of biocides on various soil microorganisms and their diversity. This review's bibliometric analysis emphasised the recent developments' statistics based on the Scopus document search. Pesticides and insecticides are reported to degrade microbes' structure, cellular processes, and distinct biochemical reactions at cellular and biochemical levels. Several biocides disrupt the relationship between plants and their microbial symbionts, hindering beneficial biological activities that are widely discussed. Most microbial target sites of or receptors are biomolecules, and biocides bind with the receptor through a ligand-based mechanism. The biomarker action mechanism in response to biocides relies on activating the receptor site by specific biochemical interactions. The production of electrophilic or nucleophilic species, free radicals, and redox-reactive agents are the significant factors of biocide's metabolic reaction. Most studies considered for the review reported the negative impact of biocides on the soil microbial community; hence, technological development is required regarding eco-friendly pesticide and insecticide, which has less or no impact on the soil microbial community.
    Matched MeSH terms: Soil/chemistry; Soil Microbiology
  13. Soil chemistry and pollution study of a closed landfill site at Ampar Tenang, Selangor, Malaysia
    Mohd Adnan SN, Yusoff S, Piaw CY
    Waste Manag Res, 2013 Jun;31(6):599-612.
    PMID: 23528999 DOI: 10.1177/0734242X13482031
    A total of 20 landfills are located in State of Selangor, Malaysia. This includes the Ampar Tenang landfill site, which was closed on 26 January 2010. It was reported that the landfill has been upgraded to a level I type of sanitary classification. However, the dumpsite area is not being covered according to the classification. In addition, municipal solid waste was dumped directly on top of the unlined natural alluvium formation. This does not only contaminate surface and subsurface soils, but also initiates the potential risk of groundwater pollution. Based on previous studies, the Ampar Tenang soil has been proven to no longer be capable of preventing pollution migration. In this study, metal concentrations of soil samples up to 30 m depth were analyzed based on statistical analysis. It is very significant because research of this type has not been carried out before. The subsurface soils were significantly polluted by arsenic (As), lead (Pb), iron (Fe), copper (Cu) and aluminium (Al). As and Pb exceeded the safe limit values of 5.90 mg/kg and 31.00 mg/kg, respectively, based on Provincial Sediment Quality Guidelines for Metals and the Interim Sediment Quality Values. Furthermore, only Cu concentrations showed a significantly decreasing trend with increasing depth. Most metals were found on clay-type soils based on the cluster analysis method. Moreover, the analysis also differentiates two clusters: cluster I-Pb, As, zinc, Cu, manganese, calcium, sodium, magnesium, potassium and Fe; cluster II-Al. Different clustering may suggest a different contamination source of metals.
    Matched MeSH terms: Soil/chemistry*; Soil Pollutants/chemistry*
  14. Degradation of chlorpyrifos in humid tropical soils
    Chai LK, Wong MH, Bruun Hansen HC
    J Environ Manage, 2013 Aug 15;125:28-32.
    PMID: 23632002 DOI: 10.1016/j.jenvman.2013.04.005
    The insecticide chlorpyrifos is extensively used in the humid tropics for insect control on crops and soils. Chlorpyrifos degradation and mineralization was studied under laboratory conditions to characterize the critical factors controlling the degradation and mineralization in three humid tropical soils from Malaysia. The degradation was fastest in moist soils (t1/2 53.3-77.0 days), compared to dry (t1/2 49.5-120 days) and wet soils (t1/2 63.0-124 days). Degradation increased markedly with temperature with activation energies of 29.0-76.5 kJ mol(-1). Abiotic degradation which is important for chlorpyrifos degradation in sub-soils containing less soil microbial populations resulted in t½ of 173-257 days. Higher chlorpyrifos dosages (5-fold) which are often applied in the tropics due to severe insects infestations caused degradation and mineralization rates to decrease by 2-fold. The mineralization rates were more sensitive to the chlorpyrifos application rates reflecting that degradation of metabolites is rate limiting and the toxic effects of some of the metabolites produced. Despite that chlorpyrifos is frequently used and often in larger amounts on tropical soils compared with temperate soils, higher temperature, moderate moisture and high activity of soil microorganisms will stimulate degradation and mineralization.
    Matched MeSH terms: Soil/chemistry*; Soil Pollutants/chemistry*
  15. Adsorption, desorption and mobility of cyfluthrin in three Malaysian tropical soils of different textures
    Lsmail BS, Choo LY, Salmijah S, Halimah M, Tayeb MA
    J Environ Biol, 2015 Sep;36(5):1105-11.
    PMID: 26521552
    The sorption and desorption of cyfluthrin mixture isomers were determined using batch equilibration method and mobility was studied under laboratory conditions, using packed soil column. The soil types used in the study were clayey, clay loam and sandy clay loam obtained from three tomato farms in Cameron Highlands. A low Freundlich adsorption distribution coefficient K(ads(f)) for cyfluthrin was observed for clayey, clay loam and sandy clay loam soils (95.69, 21.64 and 8.99 l/kg, respectively). Results showed that cyfluthrin had high Freundlich organic matter (OM) distribution coefficient K(oc) values of 5799, 2278 and 1635 lkg(-1) for clayey, clay loam and sandy clay loam soils, respectively. These values indicate that cyfluthrin is considered immobile in Malaysian soils with different textures, based on the value of K(oc) by McCall. Adsorption of cyfluthrin was significantly (P < 0.05) affected with soil pH, fertilizer NPK, organic matter content and temperature. It was observed that approximately 95.8%, 93.8% and 91.8% of the adsorbed cyfluthrin remained sorbed after four successive rinses for clayey, clay loam and sandy clay loam soils. Soil column test showed that cyfluthrin was not detected in leachate. Cyfluthrin was detected in topsoil and its concentration decreased with depth. The downward movement of cyfluthrin in sandy clay loam soil was more than that in clay loam and clayey soils. Approximately, 80.9%, 77.8% and 67.3% cyfluthrin was observed at the depth of 0-5 cm (rainfall 350 mm) for clayey, clay loam and sandy clay loam soils respectively. Mobility of cyfluthrin showed that the percentage of cyfluthrin leached into soil was not affected by the amount of rainfall. The result clearly showed that cyfluthrin molecules were bound strongly to all the three Malaysian soil types.
    Matched MeSH terms: Soil/chemistry*; Soil Pollutants/chemistry*
  16. A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions
    Lim MW, Lau EV, Poh PE
    Mar Pollut Bull, 2016 Aug 15;109(1):14-45.
    PMID: 27267117 DOI: 10.1016/j.marpolbul.2016.04.023
    Oil spills result in negative impacts on the environment, economy and society. Due to tidal and waves actions, the oil spillage affects the shorelines by adhering to the soil, making it difficult for immediate cleaning of the soil. As shoreline clean-up is the most costly component of a response operation, there is a need for effective oil remediation technologies. This paper provides a review on the remediation technologies for soil contaminated with various types of oil, including diesel, crude oil, petroleum, lubricating oil, bitumen and bunker oil. The methods discussed include solvent extraction, bioremediation, phytoremediation, chemical oxidation, electrokinetic remediation, thermal technologies, ultrasonication, flotation and integrated remediation technologies. Each of these technologies was discussed, and associated with their advantages, disadvantages, advancements and future work in detail. Nonetheless, it is important to note that no single remediation technology is considered the best solution for the remediation of oil contaminated soil.

    CAPSULE: This review provides a comprehensive literature on the various remediation technologies studied in the removal of different oil types from soil.

    Matched MeSH terms: Soil*; Soil Pollutants*
  17. Sustainable utilization of biowaste compost for renewable energy and soil amendments
    Chia WY, Chew KW, Le CF, Lam SS, Chee CSC, Ooi MSL, et al.
    Environ Pollut, 2020 Dec;267:115662.
    PMID: 33254731 DOI: 10.1016/j.envpol.2020.115662
    Acceleration of urbanization and industrialization has resulted in the drastic rise of waste generation with majority of them being biowaste. This constitutes a global challenge since conventional waste management methods (i.e., landfills) present environmental issues including greenhouse gases emissions, leachate formation and toxins release. A sustainable and effective approach to treat biowaste is through composting. Various aspects of composting such as compost quality, composting systems and compost pelletization are summarized in this paper. Common application of compost as fertilizer or soil amendment is presented with focus on the low adoption level of organic waste compost in reality. Rarely known, compost which is easily combustible can be utilized to generate electricity. With the analysis on critical approaches, this review aims to provide a comprehensive study on energy content of compost pellets, which has never been reviewed before. Environmental impacts and future prospects are also highlighted to provide further insights on application of this technology to close the loop of circular bioeconomy.
    Matched MeSH terms: Soil
  18. Assessing the impact of water infiltration on LNAPL mobilization in sand column using simplified image analysis method
    Alazaiza MYD, Ramli MH, Copty NK, Ling MC
    J Contam Hydrol, 2021 Mar;238:103769.
    PMID: 33465656 DOI: 10.1016/j.jconhyd.2021.103769
    Laboratory-scale column experiments were carried out to assess the influence of water infiltration on pooled light non-aqueous phase liquid (LNAPL) redistribution in porous media. A simplified image analysis method (SIAM) was used to evaluate the saturation distributions of the LNAPL and water in the entire domain under dynamic conditions. The experiments were conducted for high/low LNAPL volumes LNAPL volumes differentiated as low and high volumes. High resolution SIAM images of the soil column during LNAPL migration and water infiltration events were captured and analyzed. Results indicated that the capillary fringe is about 6-7 cm which was consistent with the capillary height derived from empirical equations. Moreover, SIAM provided an estimate of the field capacity (30%) of the sand. Once the LNAPL infiltration stage was started, the LNAPL was observed to rapidly migrate through the vadose zone. For the case of large LNAPL volume, the LNAPL penetrated further into capillary fringe zone. Analysis of SIAM images showed that the LNAPL redistribution was observed to vary significantly with the rate of infiltration. For higher water infiltration intensity, the injected water exerted a larger hydrodynamic force on the entrapped LNAPL forcing it move further downward into the capillary zone and the saturated zone. Overall, this study demonstrated that the SIAM technique is an accurate and cost-effective tool for the visualization of the time-dependent NAPL/water movement in laboratory-scale experiments and dynamic changes in fluid saturation in porous media.
    Matched MeSH terms: Soil
  19. Fulltext Diesel in Antarctica and a Bibliometric Study on Its Indigenous Microorganisms as Remediation Agent
    Wong RR, Lim ZS, Shaharuddin NA, Zulkharnain A, Gomez-Fuentes C, Ahmad SA
    Int J Environ Res Public Health, 2021 02 05;18(4).
    PMID: 33562609 DOI: 10.3390/ijerph18041512
    Diesel acts as a main energy source to complement human activities in Antarctica. However, the increased expedition in Antarctica has threatened the environment as well as its living organisms. While more efforts on the use of renewable energy are being done, most activities in Antarctica still depend heavily on the use of diesel. Diesel contaminants in their natural state are known to be persistent, complex and toxic. The low temperature in Antarctica worsens these issues, making pollutants more significantly toxic to their environment and indigenous organisms. A bibliometric analysis had demonstrated a gradual increase in the number of studies on the microbial hydrocarbon remediation in Antarctica over the year. It was also found that these studies were dominated by those that used bacteria as remediating agents, whereas very little focus was given on fungi and microalgae. This review presents a summary of the collective and past understanding to the current findings of Antarctic microbial enzymatic degradation of hydrocarbons as well as its genotypic adaptation to the extreme low temperature.
    Matched MeSH terms: Soil Microbiology*; Soil Pollutants*
  20. Improving sustainability and mitigating environmental impacts of agro-biowaste compost fertilizer by pelletizing-drying
    Sarlaki E, Kermani AM, Kianmehr MH, Asefpour Vakilian K, Hosseinzadeh-Bandbafha H, Ma NL, et al.
    Environ Pollut, 2021 Sep 15;285:117412.
    PMID: 34051566 DOI: 10.1016/j.envpol.2021.117412
    The use of agro-biowaste compost fertilizers in agriculture is beneficial from technical, financial, and environmental perspectives. Nevertheless, the physical, mechanical, and agronomical attributes of agro-biowaste compost fertilizers should be engineered to reduce their storage, handling, and utilization costs and environmental impacts. Pelletizing and drying are promising techniques to achieve these goals. In the present work, the effects of process parameters, including compost particle size/moisture content, pelletizing compression ratio, and drying air temperature/velocity, were investigated on the density, specific crushing energy, and moisture diffusion of agro-biowaste compost pellet. The Taguchi technique was applied to understand the effects of independent parameters on the output responses, while the optimal pellet properties were found using the iterative thresholding method. The soil and plant (sweet basil) response to the optimal biocompost pellet was experimentally evaluated. The farm application of the optimal pellet was also compared with the untreated agro-biowaste compost using the life cycle assessment approach to investigate the potential environmental impact mitigation of the pelletizing and drying processes. Generally, the compost moisture content was the most influential factor on the density and specific crushing energy of the dried pellet, while the moisture diffusion of the wet pellet during the drying process was significantly influenced by the pelletizing compression ratio. The density, specific crushing energy, and moisture diffusion of agro-biowaste compost pellet at the optimal conditions were 1242.49 kg/m3, 0.5054 MJ/t, and 8.2 × 10-8 m2/s, respectively. The optimal biocompost pellet could release 80% of its nitrogen content evenly over 98 days, while this value was 28 days for the chemical urea fertilizer. Besides, the optimal pellet could significantly improve the agronomical attributes of the sweet basil plant compared with the untreated biocompost. The applied strategy could collectively mitigate the weighted environmental impact of farm application of the agro-biowaste compost by more than 63%. This reduction could be attributed to the fact that the pelletizing-drying processes could avoid methane emissions from the untreated agro-biowaste compost during the farm application. Overall, pelletizing-drying of the agro-biowaste compost could be regarded as a promising strategy to improve the environmental and agronomical performance of farm application of organic biofertilizers.
    Matched MeSH terms: Soil
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links