Displaying all 8 publications

Abstract:
Sort:
  1. College of Pathologists, Academy of Medicine of, Malaysia
    Malays J Pathol, 2005 Jun;27(1):71-2.
    PMID: 16676698
    Matched MeSH terms: Safety Management/organization & administration*
  2. Puah LN, Ong LD, Chong WY
    Int J Occup Saf Ergon, 2016 Sep;22(3):333-9.
    PMID: 27049935 DOI: 10.1080/10803548.2016.1159390
    Although knowledge is cumulating, very little is known about the effects of various sources of support on safety and health compliance. This study goes beyond previous research by investigating the relationships among perceived support from organizations, supervisors and co-workers, and employees' safety and health compliance behaviour at chemical and petroleum process plants. The results of this study show that the support from organizations, supervisors and co-workers was significantly related to employees' safety and health compliance. Also, the findings reveal that perceived supervisor support has the strongest influence in ensuring employees' safety and health compliance behaviour.
    Matched MeSH terms: Safety Management/organization & administration*
  3. Tang DKH, Md Dawal SZ, Olugu EU
    J Safety Res, 2018 Sep;66:9-19.
    PMID: 30121115 DOI: 10.1016/j.jsr.2018.05.003
    INTRODUCTION: This study establishes the correlations between performance of a set of key safety factors and the actual lagging performance of oil platforms in Malaysia, hence the relevance of the key safety factors in evaluating and predicting the safety performance of oil and gas platforms. The key factors are crucial components of a safety performance evaluation framework and each key safety factor corresponds to a list of underlying safety indicators.

    METHOD: In this study, participating industrial practitioners rated the compliance status of each indicator using a numbering system adapted from the traffic light system, based on the actual performance of 10 oil platforms in Malaysia. Safety scores of the platforms were calculated based on the ratings and compared with the actual lagging performance of the platforms. Safety scores of two platforms were compared with the facility status reports' findings of the respective platforms.

    RESULTS: The platforms studied generally had good performance. Total recordable incident rates of the platforms were found to show significant negative correlations with management and work engagement on safety, compliance score for number of incident and near misses, personal safety, and management of change. Lost time injury rates, however, correlated negatively with hazard identification and risk assessment. The safety scores generally agreed with findings of the facility status reports with substandard process containment found as a contributor of hydrocarbon leaks.

    CONCLUSIONS: This study proves the criterion validity of the safety performance evaluation framework and demonstrates its usability for benchmarking and continuous improvement of safety practices on the Malaysian offshore oil and gas platforms.

    PRACTICAL APPLICATIONS: This study reveals the applicability of the framework and the potential of extending safety reporting beyond the few conventional lagging safety performance indicators used. The study also highlights the synergy between correlating safety factors to streamline safety management on offshore platforms.

    Matched MeSH terms: Safety Management/organization & administration
  4. Jaafar MH, Arifin K, Aiyub K, Razman MR, Ishak MIS, Samsurijan MS
    Int J Occup Saf Ergon, 2018 Dec;24(4):493-506.
    PMID: 28849991 DOI: 10.1080/10803548.2017.1366129
    The construction industry plays a significant role in contributing to the economy and development globally. During the process of construction, various hazards coupled with the unique nature of the industry contribute to high fatality rates. This review refers to previous published studies and related Malaysian legislation documents. Four main elements consisting of human, worksite, management and external elements which cause occupational accidents and illnesses were identified. External and management elements are the underlying causes contributing to occupational safety and health (OSH), while human and worksite elements are more apparent causes of occupational accidents and illnesses. An effective OSH management approach is required to contain all hazards at construction sites. An approach to OSH management constructed by elements of policy, process, personnel and incentive developed in previous work is explored. Changes to the sub-elements according to previous studies and the related Malaysian legislation are also covered in this review.
    Matched MeSH terms: Safety Management/organization & administration*
  5. de la Rosette J, Laguna P, Álvarez-Maestro M, Eto M, Mochtar CA, Albayrak S, et al.
    Int J Urol, 2020 11;27(11):981-989.
    PMID: 32772434 DOI: 10.1111/iju.14340
    OBJECTIVES: To determine the well-being of urologists worldwide during the coronavirus disease 2019 pandemic, and whether they have adequate personal protective equipment knowledge and supplies appropriate to their clinical setting.

    METHODS: Urologists worldwide completed a Société Internationale d'Urologie online survey from 16 April 2020 until 1 May 2020. Analysis was carried out to evaluate their knowledge about protecting themselves and others in the workplace, including their confidence in their ability to remain safe at work, and any regional differences.

    RESULTS: There were 3488 respondents from 109 countries. Urologists who stated they were moderately comfortable that their work environment offers good protection against coronavirus disease 2019 showed a total mean satisfaction level of 5.99 (on a "0 = not at all" to "10 = very" scale). A large majority (86.33%) were confident about protecting themselves from coronavirus disease 2019 at work. However, only about one-third reported their institution provided the required personal protective equipment (35.78%), and nearly half indicated their hospital has or had limited personal protective equipment availability (48.08%). Worldwide, a large majority of respondents answered affirmatively for testing the healthcare team (83.09%). Approximately half of the respondents (52.85%) across all regions indicated that all surgical team members face an equal risk of contracting coronavirus disease 2019 (52.85%). Nearly one-third of respondents reported that they had experienced social avoidance (28.97%).

    CONCLUSIONS: Our results show that urologists lack up-to-date knowledge of preferred protocols for personal protective equipment selection and use, social distancing, and coronavirus disease 2019 testing. These data can provide insights into functional domains from which other specialties could also benefit.

    Matched MeSH terms: Safety Management/organization & administration*
  6. Amir Sultan MM, Goh CT, Wan Puteh SE, Mokhtar M
    Int J Health Care Qual Assur, 2019 Feb 11;32(1):34-44.
    PMID: 30859864 DOI: 10.1108/IJHCQA-08-2017-0161
    PURPOSE: Mercury is widely used in medical and healthcare facilities as dental amalgam, mercury-added medical devices, thiomersal-containing vaccines, laboratory analysis and for other general applications despite the hazards. Various agencies consistently promote mercury-free medical facilities through mercury-free alternatives and better management practices, which are in line with the Minamata Convention on Mercury that aims to protect human health and environment from anthropogenic mercury release. The paper aims to discuss these issues.

    DESIGN/METHODOLOGY/APPROACH: The authors conducted a gap analysis on recommended practices gathered from the literature and current practices gathered through semi-structured interviews with Malaysian medical personnel. A life cycle approach was adopted covering mercury use: input, storage, handling, accident, waste disposal and governance phases.

    FINDINGS: The authors found that there are significant gaps between recommended and current mercury management practices. Analysis indicates improper mercury management as the main contributor to these gaps. The authors found from recommended practices that core components needing improvement include: mercury management action plan, mercury use identification team, purchasing policy, proper guidelines and monitoring systems.

    PRACTICAL IMPLICATIONS: This study helps us to understand mercury management practices and suggests essential steps to establish a mercury-free medical facility.

    ORIGINALITY/VALUE: This study explored the gaps between recommended and current mercury management practices in a medical facility and contributes to the Minamata Convention on Mercury aspirations.

    Matched MeSH terms: Safety Management/organization & administration*
  7. Chong HY, Low TS
    Int J Occup Saf Ergon, 2014;20(3):503-13.
    PMID: 25189753
    Safety and health issues remain critical to the construction industry due to its working environment and the complexity of working practises. This research attempts to adopt 2 research approaches using statistical data and court cases to address and identify the causes and behavior underlying construction safety and health issues in Malaysia. Factual data on the period of 2000-2009 were retrieved to identify the causes and agents that contributed to health issues. Moreover, court cases were tabulated and analyzed to identify legal patterns of parties involved in construction site accidents. Approaches of this research produced consistent results and highlighted a significant reduction in the rate of accidents per construction project in Malaysia.
    Matched MeSH terms: Safety Management/organization & administration
  8. Ali R, Shaharudin R, Omar A, Yusoff F
    Int J Occup Environ Health, 2012 Oct-Dec;18(4):299-306.
    PMID: 23433290 DOI: 10.1179/1077352512Z.00000000031
    INTRODUCTION: This study on workplace injuries and risk reduction practices was part of the Malaysia National Health Morbidity Survey III (NHMS III) conducted in 2006.
    METHODS: This cross-sectional population-based survey was conducted to determine the incidence of workplaces injuries and assess the magnitude of some important risk reduction practices among workers. Data were gathered through face-to-face household interviews using a pre-coded questionnaire.
    RESULTS: Of the 22 880 eligible respondents, 88·2% (20 180) responded. The incidence rate for injuries at the workplace was 4·9 per 100 (95% CI: 4·6-5·2). The overall proportion of workers who had received occupational safety and health (OSH) training before or within 1 month of starting work was 33·6%. Among respondents who perceived that personal protective equipment (PPE) was required at their workplace, only 38·9% (95% CI: 37·8-39·4) were provided with it by their employers.
    DISCUSSION: Further studies are urgently needed to identify reasons for and management of the low uptake of risk reduction practices. This issue needs to be addressed to ensure the safety and health of our working population.
    Study name: National Health and Morbidity Survey (NHMS-2006)
    Matched MeSH terms: Safety Management/organization & administration*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links