Displaying publications 1 - 20 of 77 in total

Abstract:
Sort:
  1. Yazdan. M,, Jamilah, B., Yaakob C.M., Sharifah, K.
    MyJurnal
    Effects of breading materials and deep-fat frying on fat uptake, moisture content and fatty acid composition of the black pomfret (Parastromateus niger) fillets. Black pomfret fillets both breaded and non-breaded were deep-fat fried in sunflower oil and palm olein. Fat uptake, moisture content and fatty acid composition in the fillets were determined. Total fat content in the fillets of both breaded and un-breaded fillets increased significantly (p
    Matched MeSH terms: Niger
  2. Nieland S, Barig S, Salzmann J, Gehrau F, Zamani AI, Richter A, et al.
    Microb Biotechnol, 2021 Jul;14(4):1422-1432.
    PMID: 33421319 DOI: 10.1111/1751-7915.13739
    To set a benchmark in fungal growth rate, a differential analysis of prototrophic Aspergillus fumigatus AR04 with three ascomycetes applied in > 103 t year-1 scale was performed, i.e. Ashbya gosspyii (riboflavin), Aspergillus niger (citric acid) and Aspergillus oryzae (food-processing). While radial colony growth decreased 0.5-fold when A. gossypii was cultivated at 40°C instead of 28°C, A. fumigatus AR04 responded with 1.7-fold faster hyphal growth. A. niger and A. oryzae formed colonies at 40°C, but not at 43°C. Moreover, all A. fumigatus strains tested grew even at 49°C. In chemostat experiments, A. fumigatus AR04 reached steady state at a dilution rate of 0.7 h-1 at 40°C, 120% more than reported for A. gossypii at 28°C. To study mycelial growth rates under unlimited conditions, carbon dioxide increase rates were calculated from concentrations detected online in the exhaust of batch fermentations for 3 h only. All rates calculated suggest that A. fumigatus AR04 approximates Arrhenius' rule when comparing short cultivations at 30°C with those at 40°C. Linearization of the exponential phase and comparison of the slopes revealed an increase to 192% by the 10°C up-shift.
    Matched MeSH terms: Aspergillus niger*
  3. Wahab AFFA, Abdul Karim NA, Ling JG, Hasan NS, Yong HY, Bharudin I, et al.
    Protein Expr Purif, 2019 02;154:52-61.
    PMID: 30261309 DOI: 10.1016/j.pep.2018.09.014
    Cellobiohydrolases catalyze the processive hydrolysis of cellulose into cellobiose. Here, a Trichoderma virens cDNA predicted to encode for cellobiohydrolase (cbhI) was cloned and expressed heterologously in Aspergillus niger. The cbhI gene has an open reading frame of 1518 bp, encoding for a putative protein of 505 amino acid residues with a calculated molecular mass of approximately 54 kDa. The predicted CbhI amino acid sequence has a fungal type carbohydrate binding module separated from a catalytic domain by a threonine rich linker region and showed high sequence homology with glycoside hydrolase family 7 proteins. The partially purified enzyme has an optimum pH of 4.0 with stability ranging from pH 3.0 to 6.0 and an optimum temperature of 60 °C. The partially purified CbhI has a specific activity of 4.195 Umg-1 and a low Km value of 1.88 mM when p-nitrophenyl-β-D-cellobioside (pNPC) is used as the substrate. The catalytic efficiency (kcat/Km) was 5.68 × 10-4 mM-1s-1, which is comparable to the CbhI enzymes from Trichoderma viridae and Phanaerochaete chrysosporium. CbhI also showed activity towards complex substrates such as Avicel (0.011 Umg-1), which could be useful in complex biomass degradation. Interestingly, CbhI also exhibited a relatively high inhibition constant (Ki) for cellobiose with a value of 8.65 mM, making this enzyme more resistant to end-product inhibition compared to other fungal cellobiohydrolases.
    Matched MeSH terms: Aspergillus niger/enzymology; Aspergillus niger/genetics
  4. Ong LG, Abd-Aziz S, Noraini S, Karim MI, Hassan MA
    Appl Biochem Biotechnol, 2004 8 12;118(1-3):73-9.
    PMID: 15304740
    The oil palm sector is one of the major plantation industries in Malaysia. Palm kernel cake is a byproduct of extracted palm kernel oil. Mostly palm kernel cake is wasted or is mixed with other nutrients and used as animal feed, especially for ruminant animals. Recently, palm kernel cake has been identified as an important ingredient for the formulation of animal feed, and it is also exported especially to Europe, South Korea, and Japan. It can barely be consumed by nonruminant (monogastric) animals owing to the high percentages of hemicellulose and cellulose contents. Palm kernel cake must undergo suitable pretreatment in order to decrease the percentage of hemicellulose and cellulose. One of the methods employed in this study is fermentation with microorganisms, particularly fungi, to partially degrade the hemicellulose and cellulose content. This work focused on the production of enzymes by Aspergillus niger and profiling using palm kernel cake as carbon source.
    Matched MeSH terms: Aspergillus niger/enzymology*
  5. Darah I, Sumathi G, Jain K, Lim SH
    Bioprocess Biosyst Eng, 2011 Sep;34(7):795-801.
    PMID: 21347668 DOI: 10.1007/s00449-011-0529-8
    The ability of immobilized cell cultures of Aspergillus niger FETL FT3 to produce extracellular tannase was investigated. The production of enzyme was increased by entrapping the fungus in scouring mesh cubes compared to free cells. Using optimized parameters of six scouring mesh cubes and inoculum size of 1 × 10(6) spores/mL, the tannase production of 3.98 U/mL was obtained from the immobilized cells compared to free cells (2.81 U/mL). It was about 41.64% increment. The immobilized cultures exhibited significant tannase production stability of two repeated runs.
    Matched MeSH terms: Aspergillus niger/enzymology*; Aspergillus niger/growth & development*; Aspergillus niger/ultrastructure
  6. Chua HP, Aminah Abdullah
    Sains Malaysiana, 2011;40:1123-1127.
    Kajian keberkesanan sifat antimikrob ekstrak kacangma dijalankan menggunakan ujian resapan cakera dan ujian perencatan langsung. Hasil menunjukkan ekstrak etanol dengan kepekatan 50 dan 100 mg/mL merencat Staphylococcus aureus. Bagi ekstrak air, kepekatan 10, 25, 50 dan 100 mg/mL merencat Aspergillus niger, 25, 50 dan 100 mg/mL dapat merencat Saccharomyces cerevisae dan kepekatan 100 mg/mL dapat merencat Staphylococcus aureus. Perlakuan suhu yang berbeza ke atas ekstrak dalam ujian perencatan langsung tidak menunjukkan sebarang perbezaan ke atas perencatan mikroorganisma yang dikaji.
    Matched MeSH terms: Aspergillus niger
  7. Rabeea Munawar, Ehsan Ullah Mughal, Muhammad Waseem Mumtaz, Muhammad Zubair, Jamshaid Ashraf, Zofishan Yousaf, et al.
    Sains Malaysiana, 2018;47:27-34.
    The prime objective of the present research work was to evaluate the efficiency of bio-machine for the removal of Cadmium (Cd) from aquatic systems. Aspergillus niger fungus was used as bio-machine to remove Cd from aquatic systems. Twenty three different strains (IIB-1 to IIB-23) were isolated from industrial effluents and the Langmuir and Freundlich models were applied to the best Cadmium removal strain IIB-23 in order to obtain the adsorption parameters. Different parameters such as pH, temperature, contact time, initial metal concentratio, and biomass dosage on the biosorption of Cd were studied. The percent removal of Cd initially increased with an increase in pH ranging from 5.5-6.5 and then decreased by increasing pH from 7.0-7.5. An optimized pH used for Cd removal from aquatic systems was found to be 6.5. Additionally, an optimum amount of biomass was 1.33 g for the maximum removal of Cd from the aqueous solutions with initial metal concentration of 75 mg/L. The results obtained thus indicated that Langmuir model is the best suited for the removal of Cd from aquatic systems.
    Matched MeSH terms: Aspergillus niger
  8. Oloruntade, A.J., Mohammad, T.A., Aimrun, W.
    MyJurnal
    Understanding rainfall trend can be a first step in the planning and management of water resources
    especially at the basin scale. In this study, standard tests are used to examine rainfall trends based on monthly, seasonal and mean annual series at the Niger-South Basin, Nigeria, between 1948 and 2008. Rainfall variability index showed that the decade 2000s was the driest (-2.1), while 1950s was the wettest (+0.8), with the decade 1980s being the driest in the second half of the last century, whereas the year 1983 was the driest throughout the series. Over the entire basin, rainfall variability was generally low, but higher intra-monthly than inter-annually. Annual rainfall was dominated by August, contributing about 15%, while December contributed the least (0.7%). On a seasonal scale, July-August-September (JJA) contributed over 40% of the annual rainfall, while rainfall was lowest during December-January-February (DJF) (4.5%). The entire basin displayed negative trends but only 15% indicated significant changes (α ‹ 0.1), while the magnitudes of change varied between -3.75 and -0.25 mm/yr. Similarly, only JJA exhibited insignificant upward trend, while the rest showed negative trends. About eight months of the year showed reducing trends, but only January trend was significant. Annual downward trend was generally observed in the series. The trend during 1948–1977 was negative, but it was positive for the 1978–2008 period. Hence, water resources management planning may require construction of water storage facilities to reduce summer flooding and prevent possible future water scarcity in the basin.
    Matched MeSH terms: Niger; Nigeria
  9. Dinarvand M, Rezaee M, Foroughi M
    Braz J Microbiol, 2017 Jul-Sep;48(3):427-441.
    PMID: 28359854 DOI: 10.1016/j.bjm.2016.10.026
    The aim of this study was obtain a model that maximizes growth and production of inulinase and invertase by Aspergillus niger ATCC 20611, employing response surface methodology (RSM). The RSM with a five-variable and three-level central composite design (CCD) was employed to optimize the medium composition. Results showed that the experimental data could be appropriately fitted into a second-order polynomial model with a coefficient of determination (R2) more than 0.90 for all responses. This model adequately explained the data variation and represented the actual relationships between the parameters and responses. The pH and temperature value of the cultivation medium were the most significant variables and the effects of inoculum size and agitation speed were slightly lower. The intra-extracellular inulinase, invertase production and biomass content increased 10-32 fold in the optimized medium condition (pH 6.5, temperature 30°C, 6% (v/v), inoculum size and 150rpm agitation speed) by RSM compared with medium optimized through the one-factor-at-a-time method. The process development and intensification for simultaneous production of intra-extracellular inulinase (exo and endo inulinase) and invertase from A. niger could be used for industrial applications.
    Matched MeSH terms: Aspergillus niger/enzymology; Aspergillus niger/genetics; Aspergillus niger/growth & development; Aspergillus niger/metabolism*
  10. Tai WY, Tan JS, Lim V, Lee CK
    Biotechnol Prog, 2019 05;35(3):e2781.
    PMID: 30701709 DOI: 10.1002/btpr.2781
    The high cost of cellulases remains the most significant barrier to the economical production of bio-ethanol from lignocellulosic biomass. The goal of this study was to optimize cellulases and xylanase production by a local indigenous fungus strain (Aspergillus niger DWA8) using agricultural waste (oil palm frond [OPF]) as substrate. The enzyme production profile before optimization indicated that the highest carboxymethyl cellulose (CMCase), filter paper (FPase), and xylanase activities of 1.06 U/g, 2.55 U/g, and 2.93 U/g were obtained on day 5, day 4, and day 5 of fermentation, respectively. Response surface methodology was used to study the effects of several key process parameters in order to optimize cellulase production. Of the five physical and two chemical factors tested, only moisture content of 75% (w/w) and substrate amount of 2.5 g had statistically significant effect on enzymes production. Under optimized conditions of 2.5 g of substrate, 75% (w/w) moisture content, initial medium of pH 4.5, 1 × 106 spores/mL of inoculum, and incubation at ambient temperature (±30°C) without additional carbon and nitrogen, the highest CMCase, FPase, and xylanase activities obtained were 2.38 U/g, 2.47 U/g, and 5.23 U/g, respectively. Thus, the optimization process increased CMCase and xylanase production by 124.5 and 78.5%, respectively. Moreover, A. niger DWA8 produced reasonably good cellulase and xylanase titers using OPF as the substrate when compared with previous researcher finding. The enzymes produced by this process could be further use to hydrolyze biomass to generate reducing sugars, which are the feedstock for bioethanol production.
    Matched MeSH terms: Aspergillus niger/enzymology*; Aspergillus niger/genetics; Aspergillus niger/growth & development; Aspergillus niger/metabolism
  11. Mohamad SN, Ramanan RN, Mohamad R, Ariff AB
    N Biotechnol, 2011 Feb 28;28(2):146-52.
    PMID: 20970530 DOI: 10.1016/j.nbt.2010.10.008
    The effect of different carbon and nitrogen sources on the production of mannan-degrading enzymes, focussing on β-mannanase, by Aspergillus niger was investigated using shake flask culture. The β-mannanase activity obtained during growth of A. niger on guar gum (GG, 1495 nkat mL(-1)) was much higher than those observed on other carbon substrates, locust bean gum (1148 nkat mL(-1)), α-cellulose (10.7 nkat mL(-1)), glucose (8.8 nkat mL(-1)) and carboxymethylcellulose (4.6 nkat mL(-1)). For fermentation using GG as a carbon source, bacteriological peptone gave the highest β-mannanase activity (1744 nkat mL(-1)) followed by peptone from meat (1168 nkat mL(-1)), yeast extract (817 nkat mL(-1)), ammonium sulphate (241 nkat mL(-1)), ammonium nitrate (113 nkat mL(-1)) and ammonium chloride (99 nkat mL(-1)) when used as a nitrogen source. The composition of bacteriological peptone and initial pH of the medium were further optimized using response surface methodology (RSM). Medium consisted of 21.3 g L(-1) GG and 57 g L(-1) peptone with initial culture pH of 5.5 was optimum for β-mannanase production (2063 nkat mL(-1)) by A. niger. The β-mannanase production obtained in this study using A. niger was significantly higher than those reported in the literature.
    Matched MeSH terms: Aspergillus niger/enzymology*
  12. Alam MZ, Fakhru'l-Razi A
    PMID: 15508283
    A study on liquid state bioconversion of sewage treatment plant (STP) sludge was assisted to evaluate the performance of batch fermenter compared to shake flask in a laboratory. Bioconversion of STP sludge was highly influenced by the mixed fungal culture of Penicillium corylophilum and Aspergillus niger after 4 days of treatment. The results showed that about 24.9 g kg(-1) dry sludge cake (DSC) was produced with enrichment of fungal biomass protein in fermenter while 20.1 g kg(-1) in shake flask after 4 days of fungal treatment. The effective biodegradation of STP sludge was recorded in both fermenter and shake flask experiment compared to control (uninnoculated sample). The results presented in this study revealed that the overall performance of fermenter in terms of sludge cake (biosolids) accumulation and biodegradation of STP sludge was higher than the shake flask.
    Matched MeSH terms: Aspergillus niger/growth & development*
  13. Mannan S, Fakhru'l-Razi A, Alam MZ
    Water Res, 2005 Aug;39(13):2935-43.
    PMID: 16000208
    The present study was designed to evaluate the potential of microbial adaptation and its affinity to biodegradation as well as bioconversion of soluble/insoluble (organic) substances of domestic wastewater treatment plant (DWTP) sludge (activated domestic sludge) under natural/non-sterilized conditions. The two filamentous fungi, Penicillium corylophilum (WWZP1003) and Aspergillus niger (SCahmA103) were used to achieve the objectives. It was observed that P. corylophilum (WWZP1003) was the better strain compared to A. niger (SCahmA103) for the bioconversion of domestic activated sludge through adaptation. The visual observation in plate culture showed that about 95-98% of cultured microbes (P. corylophilum and A. niger) dominated in treated sludge after 2 days of treatment. In this study, it was also found that the P. corylophilum was capable of removing 94.40% of COD and 98.95% of turbidity of filtrate with minimum dose of inoculum of 10% v/v in DWTP sludge (1% w/w). The pH level was lower (acidic condition) in the fungal treatment and maximum reduction of COD and turbidity was observed (at lower pH). The results for specific resistance to filtration (SRF) showed that the fungi played a great role in enhancing the dewaterability and filterability. In particular, the strain Penicillium had a more significant capability (than A. niger) of reducing 93.20% of SRF compared to the uninoculated sample. Effective results were observed by using fungal inoculum after 2 days of treatment. The developed LSB process is a new biotechnological approach for sludge management strategy.
    Matched MeSH terms: Aspergillus niger/metabolism*
  14. Alam MZ, Fakhru'l-Razi A
    Water Res, 2003 Mar;37(5):1118-24.
    PMID: 12553987
    A study was conducted to evaluate the settleability and dewaterability of fungal treated and untreated sludge using liquid state bioconversion process. The fungal mixed culture of Aspergillus niger and Penicillium corylophilum was used for fungal pretreatment of wastewater sludge. The fungal strains immobilized/entrapped on sludge particles with the formation of pellets and enhanced the separation process. The results presented in this study showed that the sludge particles (pellets) size of 2-5mm of diameter were formed with the microbial treatment of sludge after 2 days of fermentation that contained maximum 33.7% of total particles with 3-3.5mm of diameter. The settling rate (measured as total suspended solids (TSS) concentration, 130 mg/l) was faster in treated sludge than untreated sludge (TSS concentration, 440 mg/l) after 1 min of settling time. In 1 min of settling operation, 86.45% of TSS was settled in treated sludge while 4.35% of TSS settled in raw sludge. Lower turbidity was observed in treated sludge as compared to untreated sludge. The results to specific resistance to filtration (SRF) revealed that the fungal inoculum had significant potentiality to reduce SRF by 99.8% and 98.7% for 1% w/w and 4% w/w of TSS sludge, respectively. The optimum fermentation period recorded was 3 days for 1% w/w sludge and 6 days for 4% w/w sludge, respectively, for dewaterability test.
    Matched MeSH terms: Aspergillus niger/physiology*
  15. Abdeshahian P, Samat N, Yusoff WM
    Pak J Biol Sci, 2009 Aug 01;12(15):1049-55.
    PMID: 19943460
    The production of xylanase from palm kernel cake as a substrate was studied in solid substrate fermentation. The simultaneous effects of three independent variables, namely incubation temperature, initial moisture content of substrate and air flow rate on xylanase production were evaluated by response surface methodology using central composite face centered design. A total of 18 experiments were carried out in which Aspergillus niger FTCC 5003 was cultivated on palm kernel cake in a column bioreactor for 7 days under incubation temperature, moisture level and aeration rate determined. Test results showed that the highest xylanase activity of 174.88 U g(-1) was produced at incubation temperature, initial moisture level and aeration rate of 25 degrees C, 60% and 1.5 L min(-1), respectively. The statistical analysis of the experimental results revealed that the linear effect of incubation temperature and quadratic term of initial moisture content had highly significant effects on xylanase production (p<0.01). Statistical results also showed that interaction effect between incubation temperature and initial moisture content as well as interaction effect between moisture level and aeration rate influenced the yield ofxylanase at probability levels of 95%. Optimum conditions determined by statistical model for attaining maximum xylanase production were incubation temperature of 25 degrees C, initial moisture level of 63% and aeration rate of 1.76 L min(-1). The xylanase activity of 192.50 U g(-1) was obtained when solid substrate fermentation was performed under the optimal circumstances.
    Matched MeSH terms: Aspergillus niger/enzymology*
  16. Mohd Nasir N, Mohd Yunos FH, Wan Jusoh HH, Mohammad A, Lam SS, Jusoh A
    J Environ Manage, 2019 Nov 01;249:109373.
    PMID: 31415924 DOI: 10.1016/j.jenvman.2019.109373
    Microalgae have been increasingly used to generate biofuel, thus a sustainable technique should be implemented to harvest the biomass to ensure its existence in the environment. Aspergillus niger was used as bio-flocculant to harvest microalgae from aquaculture wastewater via flocculation technique over a range of pH and mixing rate. The bio-flocculant showed ability to adapt at a wide range of pH from 3.0 to 9.0 and at a mixing rate of 100-150 rpm, producing a harvesting efficiency of higher than 90%. The treated water possessed low concentration of chlorophyll-a (0.3-0.6 mg L-1) and cell density (2 × 106-3 × 106 cell mL-1). These indicate that Aspergillus niger is a promising bio-flocculant to be used in harvesting microalgae, thus promoting the use of flocculation as a green technology in aquaculture wastewater treatment.
    Matched MeSH terms: Aspergillus niger
  17. El Enshasy HA, Elsayed EA, Suhaimi N, Malek RA, Esawy M
    BMC Biotechnol, 2018 11 09;18(1):71.
    PMID: 30413198 DOI: 10.1186/s12896-018-0481-7
    BACKGROUND: Pectinase enzymes present a high priced category of microbial enzymes with many potential applications in various food and oil industries and an estimated market share of $ 41.4 billion by 2020.

    RESULTS: The production medium was first optimized using a statistical optimization approach to increase pectinase production. A maximal enzyme concentration of 76.35 U/mL (a 2.8-fold increase compared with the initial medium) was produced in a medium composed of (g/L): pectin, 32.22; (NH4)2SO4, 4.33; K2HPO4, 1.36; MgSO4.5H2O, 0.05; KCl, 0.05; and FeSO4.5H2O, 0.10. The cultivations were then carried out in a 16-L stirred tank bioreactor in both batch and fed-batch modes to improve enzyme production, which is an important step for bioprocess industrialization. Controlling the pH at 5.5 during cultivation yielded a pectinase production of 109.63 U/mL, which was about 10% higher than the uncontrolled pH culture. Furthermore, fed-batch cultivation using sucrose as a feeding substrate with a rate of 2 g/L/h increased the enzyme production up to 450 U/mL after 126 h.

    CONCLUSIONS: Statistical medium optimization improved volumetric pectinase productivity by about 2.8 folds. Scaling-up the production process in 16-L semi-industrial stirred tank bioreactor under controlled pH further enhanced pectinase production by about 4-folds. Finally, bioreactor fed-batch cultivation using constant carbon source feeding increased maximal volumetric enzyme production by about 16.5-folds from the initial starting conditions.

    Matched MeSH terms: Aspergillus niger/genetics; Aspergillus niger/growth & development; Aspergillus niger/metabolism*
  18. Keshavarzi F
    Med Mycol Case Rep, 2016 Sep;13:17-18.
    PMID: 27709021
    A 50-year-old male was prescribed with hydroxychloroquine (HCQ) after osteoarthritis was diagnosed. He had an old nail infection of Aspergillus niger. A remarkable improvement of the symptoms of fungal nail infection was seen after about four weeks of treatment with HCQ. It was very hard to detect the symptoms in the end of the second month of the treatment, both in the finger and toe nails. The symptoms were clearly recurred after HCQ was discontinued.
    Matched MeSH terms: Aspergillus niger
  19. Tan, M. C., Liew, S. L., Wan Aida, W. M., Osman, H., Maskat, M. Y.
    MyJurnal
    Response Surface Methodology (RSM) was used in the study to optimize the production of vanillin from isoeugenol through fermentation by Aspergillus niger I-1472. Three factors were studied which include amount of isoeugenol, resin (Amberlite XAD-4) and Span 80. During fermentation, isoeugenol as substrate were vortexed with Span 80 and added into the culture on Day 4. Resin (Amberlite XAD-4) was added into the medium the following day. The predicted optimum medium combination consisted of 3.61 g/L of isoeugenol, 5.8% (g/ mL) of Amberlite XAD-4 resin and 0.37% of Span 80 with an expected vanillin production of 0.137 g/L. Verification test showed that the model produced similar predicted and experimental values.
    Matched MeSH terms: Aspergillus niger
  20. Umar HA, Khanan MFA, Shiru MS, Ahmad A, Rahman MZA, Din AHM
    Environ Sci Pollut Res Int, 2023 Nov;30(55):116848-116859.
    PMID: 36633746 DOI: 10.1007/s11356-023-25144-z
    This study investigates hydrocarbon pollution in the Ahoada community of the Niger Delta region of Nigeria. The study uses a geographic information system (GIS) for mapping oil spill hotspots in the region. The resistivity method was used to delineate the extent of hydrocarbon pollution to a depth of 19.7 m in the Ahoada area of the region. Three categories of soil samples, impacted soil (IMS), remediated soil (RS), and control soil (CS), were collected and analyzed for the presence of BTEX, PAH, TPH, TOC, and TOG. The concentrations of the samples from the IMS and RS were compared to that of the CS to determine the extent of pollution. The GIS mapping shows that the most polluted areas in the Niger Delta Region are Rivers, Bayelsa, and Delta states. Results of the geophysical images revealed contaminants' presence to depths beyond 20 m at some locations in the study area. The highest depth of contaminant travel was at Ukperede. Soil samples' analysis showed that the range of concentrations of TPH in IMS at Oshie was 17.27-58.36 mg/kg; RS was 11.73-50.78 mg/kg which were higher than the concentrations of 0.68 mg/kg in the CS. PAHs are more prevalent in Ukperede, ranging from 54.56 to 77.54 mg/kg. BTEX concentrations ranged from 0.02 to 0.38 mg/kg for IMP and 0.01-2.7 mg/kg for RS against a CS value of 0.01 mg/kg. The study revealed that there are characteristically high resistivity values in the samples which were corroborated by the findings from the resistivity survey. TOC was found to be higher in the IMS and RS than in the CS, demonstrating that a significant quantity of the hydrocarbon has undergone appreciable decomposition.
    Matched MeSH terms: Niger; Nigeria
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links