Displaying publications 1 - 20 of 279 in total

Abstract:
Sort:
  1. Huarte-Bonnet C, Kumar S, Saparrat MCN, Girotti JR, Santana M, Hallsworth JE, et al.
    Appl Biochem Biotechnol, 2018 Mar;184(3):1047-1060.
    PMID: 28942502 DOI: 10.1007/s12010-017-2608-z
    Several filamentous fungi are able to concomitantly assimilate both aliphatic and polycyclic aromatic hydrocarbons that are the biogenic by-products of some industrial processes. Cytochrome P450 monooxygenases catalyze the first oxidation reaction for both types of substrate. Among the cytochrome P450 (CYP) genes, the family CYP52 is implicated in the first hydroxylation step in alkane-assimilation processes, while genes belonging to the family CYP53 have been linked with oxidation of aromatic hydrocarbons. Here, we perform a comparative analysis of CYP genes belonging to clans CYP52 and CYP53 in Aspergillus niger, Beauveria bassiana, Metarhizium robertsii (formerly M. anisopliae var. anisopliae), and Penicillium chrysogenum. These species were able to assimilate n-hexadecane, n-octacosane, and phenanthrene, exhibiting a species-dependent modification in pH of the nutrient medium during this process. Modeling of the molecular docking of the hydrocarbons to the cytochrome P450 active site revealed that both phenanthrene and n-octacosane are energetically favored as substrates for the enzymes codified by genes belonging to both CYP52 and CYP53 clans, and thus appear to be involved in this oxidation step. Analyses of gene expression revealed that CYP53 members were significantly induced by phenanthrene in all species studied, but only CYP52X1 and CYP53A11 from B. bassiana were highly induced with n-alkanes. These findings suggest that the set of P450 enzymes involved in hydrocarbon assimilation by fungi is dependent on phylogeny and reveal distinct substrate and expression specificities.
    Matched MeSH terms: Hydrocarbons, Cyclic/metabolism*
  2. Muhammad Barzani Gasim, Salmijah Surif, Sahibin Abd. Rahim, Chong HB, Mohd. Ekhwan Toriman, Mazlin Mokhtar
    Kajian ini bertujuan untuk mengenal pasti punca berlakunya banjir di Segamat pada 17 hingga 21 Disember 2006. Kegiatan termasuklah mengumpul, menilai dan mengalisis data taburan hujan dari Januari 1998 hingga Disember 2006 serta menganalisis data telemetri harian bagi aras dan luahan air sungai pada Disember 2006. Satu set data hujan harian, bulanan dan tahunan dari Stesen Felda Medoi, Segamat telah dianalisis dan dihubungkait dengan data telemetri. Data taburan hujan selama 8 tahun tersebut menunjukkan kawasan Bandar Segamat menerima hujan bulanan yang berjulat daripada 2.5 mm (Februari 2004) sehingga 536.8 mm (Januari 2003). Taburan hujan bulanan Oktober sehingga Disember 2006 menunjukkan kenaikan secara positif, iaitu daripada 118 mm sehingga 435 mm/bulan tetapi berlaku penurunan (392 mm) pada Januari 2007. Hasil kajian menunjukkan bahawa hujan lebat yang luar biasa dan keadaan bentuk topografi yang rendah dan beralun di kawasan kajian adalah penyebab utama banjir di Segamat.
    Matched MeSH terms: Hydrocarbons, Chlorinated
  3. Ismail A, Juahir H, Mohamed SB, Toriman ME, Kassim AM, Zain SM, et al.
    Water Sci Technol, 2021 Mar;83(5):1039-1054.
    PMID: 33724935 DOI: 10.2166/wst.2021.038
    The main focus of this study is exploring the spatial distribution of polyaromatics hydrocarbon links between oil spills in the environment via Support Vector Machines based on Kernel-Radial Basis Function (RBF) approach for high precision classification of oil spill type from its sample fingerprinting in Peninsular Malaysia. The results show the highest concentrations of Σ Alkylated PAHs and Σ EPA PAHs in ΣTAH concentration in diesel from the oil samples PP3_liquid and GP6_Jetty achieving 100% classification output, corresponding to coherent decision boundary and projective subspace estimation. The high dimensional nature of this approach has led to the existence of a perfect separability of the oil type classification from four clustered oil type components; i.e diesel, bunker C, Mixture Oil (MO), lube oil and Waste Oil (WO) with the slack variables of ξ ≠ 0. Of the four clusters, only the SVs of two are correctly predicted, namely diesel and MO. The kernel-RBF approach provides efficient and reliable oil sample classification, enabling the oil classification to be optimally performed within a relatively short period of execution and a faster dataset classification where the slack variables ξ are non-zero.
    Matched MeSH terms: Hydrocarbons; Polycyclic Hydrocarbons, Aromatic*
  4. Tursun M, Kumar CS, Bilge M, Rhyman L, Fun HK, Parlak C, et al.
    PMID: 25829021 DOI: 10.1016/j.saa.2015.03.022
    Molecular structure and properties of 2-fluoro-4-bromobenzaldehyde (FBB, C7H4BrFO) was experimentally investigated by X-ray diffraction technique and vibrational spectroscopy. Experimental results on the molecular structure of FBB were supported with computational studies using the density functional theory, with the Becke-3-Lee-Yang-Parr functional and the 6-311+G(3df,p) basis set. Molecular dimer formed by the intermolecular hydrogen bonding was investigated. Potential energy distribution analysis of normal modes was performed to identify characteristic frequencies. FBB crystallizes in orthorhombic space group P2(1)2(1)2(1) with the O-trans conformation. In order to investigate halogen effect, the chloro- (CBB) and bromo- (BBB) analogs of FBB have also been studied theoretically. It is observed that all compounds prefer the stable O-trans conformation. Although the free energy difference between the O-cis and O-trans conformers is less than 2.5 kcal/mol, the free energy rotational barrier is at least 7.4 kcal/mol. There is a good agreement between the experimentally determined structural parameters, and vibrational frequencies of FBB and those predicted theoretically.
    Matched MeSH terms: Hydrocarbons, Brominated/chemistry*; Hydrocarbons, Chlorinated/chemistry*
  5. Ahmad A, Shuhaimi Othman M, Lim E, Abd. Aziz Z
    Sains Malaysiana, 2013;42:587-596.
    Satu analisis penentuan parameter kualiti air yang penting untuk penilaian ekosistem cetek telah dilakukan menggunakan kaedah multivariat. Sebanyak 14 parameter kualiti air yang melibatkan komponen biologi, fizik dan kimia telah dikumpulkan setiap bulan selama satu tahun. Data dianalisis menggunakan ujian faktor yang melibatkan tiga proses iaitu mengenal pasti korelasi antara faktor, mengekstrak faktor dan seterusnya melihat kesan gabungan faktor-faktor tersebut. Proses pertama melibatkan pengelompokkan parameter yang berkorelasi kuat ke dalam faktor tersendiri dan mengeluarkan parameter yang mempunyai lebih daripada satu faktor. Analisis pengelasan agglomeratif hierarki (HACA) dan analisis diskriminan (DA) juga dilakukan untuk memperlihatkan kelompokan dan pengaruh faktor terhadap kualiti air tasik. Hasil analisis menunjukkan kualiti air Tasik Chini dipengaruhi oleh lebih daripada satu faktor. Hasil kajian menunjukkan komponen biologi dan kimia (nutrien) mempunyai pengaruh kuat dalam penentuan kualiti air tasik. Parameter berasaskan biologi iaitu BOD5, COD, klorofil a dan kimia (nitrat dan ortofosfat) adalah parameter yang
    penting di Tasik Chini. Ketiga-tiga analisis yang dijalankan menunjukkan kepentingan penentuan komponen biologi dan kimia bagi menentukan kualiti air Tasik Chini.
    Matched MeSH terms: Hydrocarbons, Chlorinated
  6. Sanusi W, Abdul Aziz Jemain, Wan Zawiah Wan Zin
    Sains Malaysiana, 2014;43:1791-1800.
    Dalam kajian ini, pendekatan pengelompokan kabur Gustafson-Kessel (Gx) telah digunakan untuk mengelaskan 35 stesen hujan di Semenanjung Malaysia ke dalam rantau homogen. Pertama, algoritma pengelompokan kabur GK digunakan untuk mengenal pasti rantau awal. Kemudian, diuji keserasian dan kehomogenan rantau berkenaan. Akhir sekali, penyesuaian rantau dilakukan untuk mendapatkan rantau homogen. Hasil kajian mendapati 35 stesen hujan kajian boleh dibahagikan kepada enam rantau yang homogen. Rantau 1 meliputi bahagian barat laut dan utara Semenanjung Malaysia, rantau 2, 3 dan 4 meliputi bahagian barat, rantau 5 meliputi bahagian barat daya dan rantau 6 meliputi bahagian timur. Hasil kajian ini juga memperlihatkan bahawa berdasarkan nilai purata Indeks Kerpasan Piawai (sPi) skala masa satu bulan, rantau 2 lebih sering mengalami keadaan kemarau melampau. Walau bagaimanapun, berdasarkan sPi skala masa satu bulan, peristiwa kemarau terjadi secara rawak dalam semua rantau yang dianalisis , bahkan semua rantau tersebut pernah mengalami kejadian kemarau melampau dalam tempoh masa setahun. Hasil kajian ini turut menunjukkan bahawa pendekatan pengelompokan kabur Gustafson-Kessel boleh digunakan untuk membina rantau homogen.
    Matched MeSH terms: Hydrocarbons, Chlorinated
  7. Chen WH, Cheng CL, Lee KT, Lam SS, Ong HC, Ok YS, et al.
    Chemosphere, 2021 May;271:129510.
    PMID: 33434827 DOI: 10.1016/j.chemosphere.2020.129510
    Zeolite socony mobil-5 (ZSM-5) is a common catalyst used for biomass pyrolysis. Nevertheless, the quantitative information on the catalytic behavior of ZSM-5 on biomass pyrolysis is absent so far. This study focuses on the catalytic pyrolysis phenomena and mechanisms of biomass wastes using ZSM-5 via thermogravimetric analyzer and pyrolysis-gas chromatography/mass spectrometry, with particular emphasis on catalytic level identification and aromatic hydrocarbons (AHs) formation. Two biomass wastes of sawdust and sorghum distillery residue (SDR) are investigated, while four biomass-to-catalyst ratios are considered. The analysis suggests that biomass waste pyrolysis processes can be divided into three zones, proceeding from a heat-transfer dominant zone (zone 1) to catalysis dominant zones (zones 2 and 3). The indicators of the intensity of difference (IOD), catalytic effective area, catalytic index (CI), and aromatic enhancement index are conducted to measure the catalytic effect of ZSM-5 on biomass waste pyrolysis and AHs formation. The maximum IOD occurs in zone 2, showing the highest intensity of the catalytic effect. The CI values of the two biomass wastes increase with increasing the biomass-to-catalyst ratio. However, there exists a threshold for sawdust pyrolysis, indicating a limit for the catalytic effect on sawdust. The higher the catalyst addition, the higher the AHs proportion in the vapor stream. When the biomass-to-catalyst ratio is 1/10, AHs formation is intensified significantly, especially for sawdust. Overall, the indexes conducted in the present study can provide useful measures to identify the catalytic pyrolysis dynamics and levels.
    Matched MeSH terms: Hydrocarbons, Aromatic*
  8. Milad A, Babalghaith AM, Al-Sabaeei AM, Dulaimi A, Ali A, Reddy SS, et al.
    Int J Environ Res Public Health, 2022 Nov 11;19(22).
    PMID: 36429580 DOI: 10.3390/ijerph192214863
    The environmental concerns of global warming and energy consumption are among the most severe issues and challenges facing human beings worldwide. Due to the relatively higher predicted temperatures (150-180 °C), the latest research on pavement energy consumption and carbon dioxide (CO2) emission assessment mentioned contributing to higher environmental burdens such as air pollution and global warming. However, warm-mix asphalt (WMA) was introduced by pavement researchers and the road construction industry instead of hot-mix asphalt (HMA) to reduce these environmental problems. This study aims to provide a comparative overview of WMA and HMA from environmental and economic perspectives in order to highlight the challenges, motivations, and research gaps in using WMA technology compared to HMA. It was discovered that the lower production temperature of WMA could significantly reduce the emissions of gases and fumes and thus reduce global warming. The lower production temperature also provides a healthy work environment and reduces exposure to fumes. Replacing HMA with WMA can reduce production costs because of the 20-75% lower energy consumption in WMA production. It was also released that the reduction in energy consumption is dependent on the fuel type, energy source, material heat capacity, moisture content, and production temperature. Other benefits of using WMA are enhanced asphalt mixture workability and compaction because the additives in WMA reduce asphalt binder viscosity. It also allows for the incorporation of more waste materials, such as reclaimed asphalt pavement (RAP). However, future studies are recommended on the possibility of using renewable, environmentally friendly, and cost-effective materials such as biomaterials as an alternative to conventional WMA-additives for more sustainable and green asphalt pavements.
    Matched MeSH terms: Hydrocarbons*
  9. Chuah LF, Nawaz A, Dailin DJ, Oloruntobi O, Habila MA, Tong WY, et al.
    Chemosphere, 2023 Oct;337:139293.
    PMID: 37369285 DOI: 10.1016/j.chemosphere.2023.139293
    Crude oil pollution is one of the most serious environmental issues today, and the clean-up procedure is perhaps the most difficult. Within one to three weeks, the vast majority of oil bacteria may degrade approximately 60% of the crude oil, leaving approximately 40% intact. The by-product metabolites produced during the breakdown of oil are essentially organic molecules in nature. These metabolites inhibit its enzymes, preventing the oil bacteria from further degrading the oil. By combining a variety of different oils with heterotrophic bacteria in a bioreactor, the rate of crude oil biodegradation was accelerated. In this study, two strains of oil-resistant, heterotrophic bacteria (OG1 and OG2-Erythrobacter citreus) and a bacterium that uses hydrocarbons (AR3-Pseudomonas pseudoalcaligenes) were used. Gas chromatography-mass spectroscopy was used to investigate the effectiveness of this consortium of symbiotic bacteria in the biodegradation of crude oil. According to gravimetric and gas chromatography analyses, the consortium bacteria digested 69.6% of the crude oil in the bioreactor, while the AR3 single strain was only able to destroy 61.9% of it. Under the same experimental conditions, consortium bacteria degraded approximately 84550.851 ppb (96.3%) of 16 aliphatic hydrocarbons and 9333.178 ppb (70.5%) of 16 aromatic hydrocarbons in the bioreactor. It may be inferred that the novel consortium of symbiotic bacteria accelerated the biodegradation process and had great potential for use in increasing the bioremediation of hydrocarbon-contaminated locations.
    Matched MeSH terms: Hydrocarbons/metabolism
  10. Magam SM, Masood N, Alkhadher SAA, Alanazi TYA, Zakaria MP, Sidek LM, et al.
    Environ Geochem Health, 2024 Jan 16;46(2):38.
    PMID: 38227164 DOI: 10.1007/s10653-023-01828-w
    The seasonal variation of petroleum pollution including n-alkanes in surface sediments of the Selangor River in Malaysia during all four climatic seasons was investigated using GC-MS. The concentrations of n-alkanes in the sediment samples did not significantly correlate with TOC (r = 0.34, p > 0.05). The concentrations of the 29 n-alkanes in the Selangor River ranged from 967 to 3711 µg g-1 dw, with higher concentrations detected during the dry season. The overall mean per cent of grain-sized particles in the Selangor River was 85.9 ± 2.85% sand, 13.5 ± 2.8% clay, and 0.59 ± 0.34% gravel, respectively. n-alkanes are derived from a variety of sources, including fresh oil, terrestrial plants, and heavy/degraded oil in estuaries. The results of this study highlight concerns and serve as a warning that hydrocarbon contamination is affecting human health. As a result, constant monitoring and assessment of aliphatic hydrocarbons in coastal and riverine environments are needed.
    Matched MeSH terms: Hydrocarbons*
  11. Abdulra'uf LB, Junaid AM, Lawal AR, Ibrahim HB, Tan GH
    Food Chem, 2025 Jan 15;463(Pt 4):141464.
    PMID: 39369599 DOI: 10.1016/j.foodchem.2024.141464
    The use of pesticides has led to environmental pollution and posed a global health risk, since they remain as residues on foods. Beans one of the most widely cultivated crop in Africa, and susceptible to attack by insects both on field and during storage, leading to the application of pesticides to control pests' infestation. However, misuse of these chemicals by farmers on beans has resulted in the rejection of beans exported to European countries, due to the presence of pesticide residues at concentrations higher than the maximum residues levels (MRLs). In this study, the effectiveness of the Association Official Analytical Chemists (AOAC) Official Method and the European Committee of Standardization (CEN) Standard Method, were determined using multivariate approach for the analysis of organochlorine pesticide residues in 6 varieties of beans samples. The significance of factors (mass of sample, volume of acetonitrile, mass of magnesium sulphate, sample pH, centrifugation time and speed) affecting the efficiency of extraction was estimated using Plackett-Burman design, while central composite design was used to optimize the significant factors. The following optimum factors were subsequently used for method validation, recovery tests, and real sample analysis: 4 g of sample sludge (1:1 v/v), 10 mL of acetonitrile, 4.45 g of MgSO4, and 5 min of centrifugation at 5000 rpm. The figure of merit of analytical methodology estimated using matrix-matched internal standard calibration method gave linearity ranging from 0.25 to 500 μg/kg, with correlation coefficient (R2) greater than 0.99, the recovery ranged from 75.55 to 110.41 (RSD = 0.70-16.65), with LOD and LOQ of 0.23-1.77 μg/kg and 0.76-5.88 μg/kg, respectively.
    Matched MeSH terms: Hydrocarbons, Chlorinated/analysis
  12. Nazeer U, Rasool N, Mujahid A, Mansha A, Zubair M, Kosar N, et al.
    Molecules, 2020 Jul 31;25(15).
    PMID: 32752125 DOI: 10.3390/molecules25153521
    In the present study, 2-bromo-4-chlorophenyl-2-bromobutanoate (3) was synthesized via the reaction of 2-bromo-4-chlorophenol with 2-bromobutanoyl bromide in the presence of pyridine. A variety of 2-bromo-4-chlorophenyl-2-bromobutanoate derivatives (5a-f) were synthesized with moderate to good yields via a Pd-catalyzed Suzuki cross-coupling reaction. To find out the reactivity and electronic properties of the compounds, Frontier molecular orbital analysis, non-linear optical properties, and molecular electrostatic potential studies were performed.
    Matched MeSH terms: Hydrocarbons, Halogenated/chemical synthesis; Hydrocarbons, Halogenated/chemistry*
  13. Sharuddin SSN, Abdullah SRS, Hasan HA, Othman AR, Ismail N'
    Sci Total Environ, 2024 Dec 01;954:176189.
    PMID: 39277001 DOI: 10.1016/j.scitotenv.2024.176189
    Almost over ten years, environmental experts have concentrated on implementing risk-based management strategies for the remediation of sites contaminated with total petroleum hydrocarbons (TPHs), which can potentially have detrimental ecological impacts. Phytoremediation widely recognized as a green technology a plant-based and economically efficient technology, emerges as a promising method to offer an alternative to existing treatment technologies in TPH contaminated ecosystems. The utilization of Scirpus grossus, a perennial plant, has been proposed as a practical, safe, and cost-effective method for remediating soil contaminated with petroleum hydrocarbons. This study aimed to evaluate the efficacy of S. grossus in removing total petroleum hydrocarbons (TPH) in real crude-oil sludge. Employing a batch phytoremediation system with S. grossus, the experiment was conducted in crates within a greenhouse, maintaining ambient temperatures (30 °C-35 °C) for a duration of 28 days. Each crate was populated with 9-month-old plants of uniform size, initially cultivated in the greenhouse before being transplanted into crates containing 100 % crude-oil sludge with an initial TPH concentration of 37,554 mg/kg for the treatment phase. TPH removal rates were assessed after 14, 21, and 28 days of exposure, resulting in removal rates of 67 %, 74 %, and 75 %, respectively. The highest concentration of rhizobacteria recorded in both sample (with contaminants and without contaminants) were 5.56 × 104 and 5.72 × 104 CFU/mL respectively. Furthermore, TPH extraction from both stems and roots of S. grossus was analysed, revealing the highest TPH concentration of 15,319 mg/kg and about 8000 mg/kg of TPH at day 28 by roots and stem sample respectively. In conclusion, S. grossus demonstrated substantial potential in effectively mitigating the toxicity of TPH in real crude-oil sludge contamination scenarios.
    Matched MeSH terms: Hydrocarbons/analysis; Hydrocarbons/metabolism
  14. Rafiq W, Bin Napiah M, Hartadi Sutanto M, Salah Alaloul W, Nadia Binti Zabri Z, Imran Khan M, et al.
    Materials (Basel), 2020 Oct 22;13(21).
    PMID: 33105633 DOI: 10.3390/ma13214704
    Moisture damage in hot mix asphalt pavements is a periodic but persistent problem nowadays, even though laboratory testing is performed to identify different moisture-susceptible mixtures. In this study, a Hamburg Wheel Tracking device (HWTD) was used for rutting tests which were conducted on control and a high percentage of recycled asphalt pavement (RAP), i.e., 30%, 50% and 100% of virgin mixtures, under air dry and water-immersed conditions. Similarly, the extracted bitumen from RAP was tested for binder physical properties. Results showed that the asphalt mixtures containing RAP have less rut depth as compared to the control mix both in air dry and immersion conditions and hence showed better anti-rutting properties and moisture stability. Stripping performance of control and RAP containing mixtures was also checked, concluding that the RAP mixture was greatly dependent on the interaction between the binder (virgin plus aged) and aggregates.
    Matched MeSH terms: Hydrocarbons
  15. Almansoory AF, Idris M, Abdullah SRS, Anuar N, Kurniawan SB
    Chemosphere, 2021 Apr;269:128760.
    PMID: 33162166 DOI: 10.1016/j.chemosphere.2020.128760
    The greenhouse phytotoxicity experiment was conducted to analyse and assess the capability of Scirpus mucronatus (L.) in tolerating and removing petrol in contaminated soil. This research was conducted for 72 days by using 5, 10 and 30 g/kg petrol as soil contaminants. Results showed that the system planted with S. mucronatus (L.) had high potential to treat the 10 g/kg petrol-contaminated soil and had an average Total Petroleum Hydrocarbon (TPH) removal of 82.1%. At 5 and 30 g/kg petrol, the planted system removed 74.9% and 75.8% TPH, respectively. The petrol (10 g/kg) affected the plant growth positively, which was indicated by the increase in dry and wet weights throughout the research period. The removal of the TPH in the system was performed because of the interaction of plants and rhizobacteria. SEM showed that a high concentration of petrol (30 g/kg) affected the plant tissue negatively, as indicated by the altered structures of the root and stem cells. EDX results also confirmed that petrol was absorbed by the plant, as shown by the increased carbon content in the plant's root and stem after the treatment.
    Matched MeSH terms: Hydrocarbons
  16. Bilema M, Aman MY, Hassan NA, Memon ZA, Omar HA, Yusoff NIM, et al.
    Materials (Basel), 2021 May 24;14(11).
    PMID: 34073812 DOI: 10.3390/ma14112781
    Researchers are exploring the utilisation of reclaimed asphalt pavement (RAP) as a recycled material to determine the performance of non-renewable natural aggregates and other road products such as asphalt binder, in the construction and rehabilitation stage of asphalt pavements. The addition of RAP in asphalt mixtures is a complex process and there is a need to understand the design of the asphalt mixture. Some of the problems associated with adding RAP to asphalt mixtures are moisture damage and cracking damage caused by poor adhesion between the aggregates and asphalt binder. There is a need to add rejuvenators to the recycled mixture containing RAP to enhance its performance, excepting the rutting resistance. This study sought to improve asphalt mixture performance and mechanism by adding waste frying oil (WFO) and crumb rubber (CR) to 25 and 40% of the RAP content. Moreover, the utilisation of CR and WFO improved pavement sustainability and rutting performance. In addition, this study prepared five asphalt mixture samples and compared their stiffness, moisture damage and rutting resistance with the virgin asphalt. The results showed enhanced stiffness and rutting resistance of the RAP but lower moisture resistance. The addition of WFO and CR restored the RAP properties and produced rutting resistance, moisture damage and stiffness, which were comparable to the virgin asphalt mixture. All waste and virgin materials produce homogeneous asphalt mixtures, which influence the asphalt mixture performance. The addition of a high amount of WFO and a small amount of CR enhanced pavement sustainability and rutting performance.
    Matched MeSH terms: Hydrocarbons
  17. NUR IZZI MD.YUSOFF, MOHD ROSLI HAININ, MOUNIER D, AIREY GD
    Sains Malaysiana, 2013;42:1647-1654.
    According to the classical theory of viscoelasticity, a linear viscoelastic (LVE) function can be converted into another viscoelastic function even though they emphasize different information. In this study, dynamic tests were conducted on different conventional penetration grade bitumens using a dynamic shear rheometer (DSR) in the LVE region. The results showed that the dynamic data in the frequency domain can be converted into the time domain functions using a numerical technique. This was done with the aid of the non-linear regularization (NLREG) computer program. The NLREG software is a computer program for solving nonlinear ill-posed problem and is based on non-linear Tikhonov regularization method. The use of data interconversion equation is found suitable for converting from the frequency domain into the time domain of conventional penetration grade bitumens.
    Matched MeSH terms: Hydrocarbons
  18. Haryati Yaacob, Mohd Rosli Hainin, Ahmad Safuan, Chag FL
    Sains Malaysiana, 2014;43:467-474.
    Quality of bond between layers of asphaltic concrete course is a key element to ensure the performance of a modern asphalt pavement. A proper interlayer bond ensures the structural integrity of the pavement and prevents possible distresses from occurring within the designed service life. In Malaysia, delamination is a common distress related to insufficient degree of adhesion though slippage failure can be occasionally encountered. Generally, bond development is closely related to the design factors and construction factors. This paper however focused on the construction factors only, hoping to provide some useful information which might be overlooked by the contractors during construction but is of extreme important especially in enhancing the bond development in the asphalt layers. The construction factors in particular interest discussed in this paper include curing time of asphalt emulsion, surface condition of a pavement and technology and quality of workmanship and construction. It is important to note that both design factors and construction factors are inter-related in optimizing the degree of adhesion. Thus, all factors need to be carefully identified and fulfilled in order to maximize the bond strength between pavement surfacing layers for a better quality and longer service life of pavement in Malaysia.
    Matched MeSH terms: Hydrocarbons
  19. Ghani RA, Nasir R, Wan Shahrazad WS, Yusooff F
    Jurnal Psikologi Malaysia, 2013;olume 27:3-14.
    Kajian kuasai-eksperimental ini dijalankan bertujuan untuk mengukur kesan terapi keluarga ke atas herotan kognitif pesalah remaja. Subjek kajian terdiri daripada 18 orang pesalah jenayah remaja yang menerima perintah bon berkelakuan baik berserta perintah tambahan bengkel interaktif sebagai kumpulan rawatan dan 18 orang pesalah remaja yang menerima perintah bon berkelakuan baik tanpa perintah tambahan bengkel interaktif sebagai kumpulan kawalan. Herotan kognitif diukur menggunakan soal selidik laporan kendiri Cognitive Distortion Scale (CDS). Subjek rawatan diberikan enam sesi terapi keluarga dalam jangka masa 2 - 3 bulan selama 50 ke 90 minit bagi setiap sesi. Ujian SPANOVA digunakan untuk mengukur kesan terapi keluarga ke atas pesalah remaja. Hasil kajian menunjukkan terapi keluarga berkesan secara signifikan untuk mengurangkan herotan kognitif pesalah remaja.
    Matched MeSH terms: Hydrocarbons, Chlorinated
  20. Amirah Audadi Madzen, Lam KC
    Sains Malaysiana, 2017;46:421-428.
    Fenologi tumbuhan menggambarkan fasa kitaran hidup atau aktiviti tumbuhan dan adalah penting untuk memahami
    interaksinya dengan iklim. Kajian dilakukan untuk mengenal pasti respons fenologi tumbuhan dan metrik fenologi
    hutan dipterokarpa, kelapa sawit dan pokok getah menggunakan data indeks tumbuhan Enhanced Vegetation Index
    (EVI) daripada MODIS-Aqua (produk MYD13Q1) dan purata hujan bulanan sepanjang tahun 2007 dan 2009 di negeri
    Johor. Pola hujan pada tahun 2007 menunjukkan taburan hujan normal, manakala tahun 2009 mengalami kekurangan
    hujan sepanjang tempoh sebelas tahun (2000-2010). Hasil mendapati tren EVI hutan dipterokarpa lebih bervariasi pada
    2009 dengan nilai EVI antara 0.39-0.64 berbanding tren pada 2007 yang tekal dengan nilai EVI antara 0.33-0.57. Tren
    fenologi kelapa sawit pada 2007 lebih kerap mengalami turun naik berbanding pada 2009, masing-masing dengan EVI
    antara 0.45-0.71 dan 0.5-0.74. Corak fenologi pokok getah pada kedua-dua tahun kajian adalah sama dan julat EVI
    pada 2009 adalah lebih kecil berbanding 2007, masing-masing dengan EVI antara 0.39-0.62 dan 0.30-0.73. Pengaruh
    masa susulan ke atas tahap kehijauan tumbuhan telah dikesan, khususnya selepas peristiwa hujan lebat dalam dua
    tahun tersebut dan sedikit sebanyak mempengaruhi nilai korelasi antara pemboleh ubah purata hujan bulanan dengan
    EVI tumbuh-tumbuhan. Permulaan dan pengakhiran musim pertumbuhan hutan dipterokarpa bagi kedua-dua tahun
    berlaku dalam bulan yang sama, iaitu Februari (permulaan musim) dan Disember (pengakhiran musim). Tidak wujud
    perbezaan yang ketara antara panjang musim pertumbuhan kelapa sawit bagi kedua-dua tahun, iaitu hanya 32 hari
    lebih panjang pada 2007 berbanding 2009. Musim pertumbuhan pokok getah pula adalah lebih panjang pada 2007 dan
    lebih singkat pada 2009, masing-masing 176 hari dan 113 hari.
    Matched MeSH terms: Hydrocarbons, Chlorinated
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links