Palm oil production has increased significantly, specifically in Indonesia and Malaysia. However, this growth has raised environmental concerns due to the high discharge of empty fruit bunches, palm oil mill effluents, and other solid wastes. Therefore, this study aims to examine the treatment of palm oil waste by composting and systematically review insights into its application through a systematic literature review approach. Among the 1155 articles, a total of 135 were selected for a systematic review of palm oil waste management developments and their applications, while 14 were used for determining compost quality according to the criteria and requirements established in the systematic literature review. Moreover, using Egger's test, JAMOVI 1.6.23 software was used to analyze random effects models with 95% confidence intervals and publication bias. The results showed that palm oil waste was optimally treated by composting, which is considered as a sustainable technology for protecting the environment, human safety, and economic value. The in-vessel method with a controlled composting chamber is the best system with a minimum time of 14 days. However, it requires tight control and provides a final product with a high microbial colony form outdoors and indoors compared to the windrow system. This study is useful to see the bias of research results and helps to find new studies that need to be developed, especially in this case related to the management of palm oil waste into organic compost fertilizer and its application methods in the field. It is suggested that applying palm oil waste or compost is mainly performed by mulching. In contrast, new challenges for better processing to produce organic fertilizers and applicable technologies for sustainable waste management are recommended. The method must be affordable, efficient, and practical, combining compost quality with maximum nutrient recovery.
Acceleration of urbanization and industrialization has resulted in the drastic rise of waste generation with majority of them being biowaste. This constitutes a global challenge since conventional waste management methods (i.e., landfills) present environmental issues including greenhouse gases emissions, leachate formation and toxins release. A sustainable and effective approach to treat biowaste is through composting. Various aspects of composting such as compost quality, composting systems and compost pelletization are summarized in this paper. Common application of compost as fertilizer or soil amendment is presented with focus on the low adoption level of organic waste compost in reality. Rarely known, compost which is easily combustible can be utilized to generate electricity. With the analysis on critical approaches, this review aims to provide a comprehensive study on energy content of compost pellets, which has never been reviewed before. Environmental impacts and future prospects are also highlighted to provide further insights on application of this technology to close the loop of circular bioeconomy.
Foliar fertilization is a reliable technique for correcting a nutrient deficiency in plants caused by inadequate nutrient supply to the roots in acid soil. Soluble nutrients in banana pseudostem sap might be effective to supplement chemical fertilizers. However, the limited nutrients in sole banana pseudostem sap as foliar fertilization may not meet-up the nutritional demand of the crop. Field trials were, therefore, conducted with the combination of soil-applied fertilizers with foliar spray of banana pseudostem sap to increase nutrient uptake, yield, and quality of sweet corn planted in acidic soil. Three treatments viz., 100% recommended dose of fertilizers (RD) as control (T1), 75% of RD applied in soil with foliar application of non-enriched banana pseudostem sap (T2), and 50% RD applied in soil with foliar spray of enriched banana pseudostem sap (T3) were replicated four times. The combination of soil-applied fertilizer with foliar spray of enriched banana pseudostem sap (T3) showed a significant increase in leaf area index (11.3%), photosynthesis (12%), fresh cob yield (39%), and biomass of corn (29%) over control. Besides, the 50% RD of soil fertilization with foliar spray of enriched pseudostem sap increased nutrient uptake in addition to an increase in sugar content, phenolic content, soluble protein, and amino acids of corn. Considering the economic analysis, the highest net income, BCR (3.74) and MBCR (1.25) values confirmed the economic viability of T3 treatment over the T1. The results suggest that foliar spray of enriched banana pseudostem sap can be used as a supplementary source of nutrients to enhance nutrient uptake by corn while increasing yield and minimizing chemical fertilizer use in acid soil.
The bio- and thermal degradation as well as the water absorption properties of a novel biocomposite comprising cellulose nanoparticles, natural rubber and polylactic acid have been investigated. The biodegradation process was studied through an assembled condition based on the soil collected from the central Malaysian palm oil forests located in the University of Nottingham Malaysia. The effects of the presence of the cellulose nanoparticles and natural rubber on the biodegradation of polylactic acid were investigated. The biodegradation process was studied via thermal gravimetric analysis and scanning electron microscopy. It was understood that the reinforcement of polylactic acid with cellulose nanoparticles and natural rubber increases the thermal stability by ~ 20 °C. Limited amorphous regions on the surface of the cellulose nanoparticles accelerated the biodegradation and water absorption processes. Based on the obtained results, it is predicted that complete biodegradation of the synthesised biocomposites can take place in 3062 h, highlighting promising agricultural applications for this biocomposite.
Source-separating sanitation systems offer the possibility of recycling nutrients present in wastewater as crop fertilisers. Thereby, they can reduce agriculture's impacts on global sources, sinks, and cycles for nitrogen and phosphorous, as well as their associated environmental costs. However, it has been broadly assumed that people would be reluctant to perform the new sanitation behaviours that are necessary for implementing such systems in practice. Yet, few studies have tried to systematically gather evidence in support of this assumption. To address this gap, we surveyed 3763 people at 20 universities in 16 countries using a standardised questionnaire. We identified and systematically assessed cross-cultural and country-level explanatory factors that were strongly associated with people's willingness to consume food grown using human urine as fertiliser. Overall, 68% of the respondents favoured recycling human urine, 59% stated a willingness to eat urine-fertilised food, and only 11% believed that urine posed health risks that could not be mitigated by treatment. Most people did not expect to pay less for urine-fertilised food, but only 15% were willing to pay a price premium. Consumer perceptions were found to differ greatly by country and the strongest predictive factors for acceptance overall were cognitive factors (perceptions of risks and benefits) and social norms. Increasing awareness and building trust among consumers about the effectiveness of new sanitation systems via cognitive and normative messaging can help increase acceptance. Based on our findings, we believe that in many countries, acceptance by food consumers will not be the major social barrier to closing the loop on human urine. That a potential market exists for urine-fertilised food, however, needs to be communicated to other stakeholders in the sanitation service chain.
Green biomass is a renewable and biodegradable material that has the potential use to trap urea to develop a high-efficiency urea fertilizer for crops' better performance. Current work examined the morphology, chemical composition, biodegradability, urea release, soil health, and plant growth effects of the SRF films subjected to changes in the thickness of 0.27, 0.54, and 1.03 mm. The morphology was examined by Scanning Electron Microscopy, chemical composition was analyzed by Infrared Spectroscopy, and biodegradability was assessed through evolved CO2 and CH4 quantified through Gas Chromatography. The chloroform fumigation technique was used for microbial growth assessment in the soil. The soil pH and redox potential were also measured using a specific probe. CHNS analyzer was used to calculate the total carbon and total nitrogen of the soil. A plant growth experiment was conducted on the Wheat plant (Triticum sativum). The thinner the films, the more they supported the growth and penetration of the soil's microorganisms mainly the species of fungus possibly due to the presence of lignin in films. The fingerprint regions of the infrared spectrum of SRF films showed all films in soil changed in their chemical composition due to biodegradation but the increase in the thickness possibly provides resistance to the films' losses. The higher thickness of the film delayed the rate and time for biodegradation and the release of methane gas in the soil. The 1.03 mm film (47% in 56 days) and 0.54 mm film (35% in 91 days) showed the slowest biodegradability as compared to the 0.27 mm film with the highest losses (60% in 35 days). The slow urea release is more affected by the increase in thickness. The Korsymer Pappas model with release exponent value of < 0.5 explained the release from the SRF films followed the quasi-fickian diffusion and also reduced the diffusion coefficient for urea. An increase in the pH and decrease in the redox potential of the soil is correlated with higher total organic content and total nitrogen in the soil in response to amending SRF films with variable thickness. Growth of the wheat plant showed the highest average plant length, leaf area index and grain per plant in response to the increase in the film's thickness. This work developed an important knowledge to enhance the efficiency of film encapsulated urea that can better slow the urea release if the thickness is optimized.
A large amount of ammonia volatilization from the agricultural system causes environmental problems and increases production costs. Conservation agriculture has emerged as an alternate and sustainable crop production system. Therefore, in the present study, ammonia losses from different agricultural practices were evaluated for the wheat crop under different tillage practices. The results of the present study showed that the cumulative emission of ammonia flux from the wheat field varied from 6.23 to 24.00 kg ha-1 (P ≤ 0.05) in conservation tillage (CA) and 7.03 to 26.58 kg ha-1 (P ≤ 0.05) in conventional tillage (CT) among different treatments. Application of basal 80% nitrogen resulted in the highest ammonia flux in conventional and conservation tillage practices. The ammonia volatilization followed the following trend: urea super granules with band placement > neem-coated urea with band placement > neem-coated urea with broadcast before irrigation > neem-coated urea with broadcast after irrigation > slow-release N fertilizer (urea stabilized with DCD and N(n-butyl)thiophosphoric triamide) with band placement. The conservation agricultural practices involving conservation tillage appear to be a sustainable approach for minimizing ammonia volatilization and improving wheat productivity.
Miners, factory workers, traders, end-users, and foodstuff consumers all run the risk of encountering health hazards derived from the presence of elevated levels of radiation in fertilizers, as these groups often come into direct or indirect contact with fertilizers as well as raw materials throughout various linked processes such as mineral extractions, fertilizer production, agricultural practices. A total of 30 samples of various kinds of fertilizer produced in different factories in Dhaka megacity were analyzed to quantify the concentrations of primordial radionuclides using HPGe detector. Among the analyzed samples, average (range) concentration of 40K was found to be 9920 ± 1091 (8700 ± 957-11,500 ± 1265), 9100 ± 1001 (8600 ± 946-9600 ± 1056), 2565 ± 282 (2540 ± 279-2590 ± 285), and 3560 ± 392 (2620 ± 288-4500 ± 495) Bq/kg in the samples of Muriate of Potash Fertilizer, Sulphate of Potash Fertilizer, Humic Acid Fertilizer, and NPKS Fertilizer, respectively. Elevated concentration of 226Ra was found in Triple Super Phosphate Fertilizer with a mean (range) of 335 ± 37 (290 ± 32-380 ± 42) Bq/kg. The higher activity of 40K can be linked to the greater levels of elemental potassium in phosphate fertilizer. Elevated concentrations of radionuclides may also result from variations in chemical processes as well as the local geology of the mining areas where the raw materials were extracted for fertilizer production. Numerous fertilizer brands surpass prescribed limits for various hazardous parameters, presenting significant health risks to factory workers, farmers, and consumers of agricultural products. This study provides baseline information on the radioactivity of fertilizers, which could be used to develop mitigation methods, establish national fertilizer usage limits, justify regulatory frameworks, and raise public awareness of fertilizer overuse. The findings of the study could potentially help to explore the impact of fertilizer on the food chain.
Bush bean, long bean, mung bean, and winged bean plants were grown with N fertilizer at rates of 0, 2, 4, and 6 g N m(-2) preceding rice planting. Concurrently, rice was grown with N fertilizer at rates of 0, 4, 8, and 12 g N m(-2). No chemical fertilizer was used in the 2nd year of crop to estimate the nitrogen agronomic efficiency (NAE), nitrogen recovery efficiency (NRE), N uptake, and rice yield when legume crops were grown in rotation with rice. Rice after winged bean grown with N at the rate of 4 g N m(-2) achieved significantly higher NRE, NAE, and N uptake in both years. Rice after winged bean grown without N fertilizer produced 13-23% higher grain yield than rice after fallow rotation with 8 g N m(-2). The results revealed that rice after winged bean without fertilizer and rice after long bean with N fertilizer at the rate of 4 g N m(-2) can produce rice yield equivalent to that of rice after fallow with N fertilizer at rates of 8 g N m(-2). The NAE, NRE, and harvest index values for rice after winged bean or other legume crop rotation indicated a positive response for rice production without deteriorating soil fertility.
Nutrients released into soils from uncoated fertilizer granules are lost continuously due to volatilization, leaching, denitrification, and surface run-off. These issues have caused economic loss due to low nutrient absorption efficiency and environmental pollution due to hazardous emissions and water eutrophication. Controlled-release fertilizers (CRFs) can change the release kinetics of the fertilizer nutrients through an abatement strategy to offset these issues by providing the fertilizer content in synchrony with the metabolic needs of the plants. Parametric analysis of release characteristics of CRFs is of paramount importance for the design and development of new CRFs. However, the experimental approaches are not only time consuming, but they are also cumbersome and expensive. Scientists have introduced mathematical modeling techniques to predict the release of nutrients from the CRFs to elucidate fundamental understanding of the dynamics of the release processes and to design new CRFs in a shorter time and with relatively lower cost. This paper reviews and critically analyzes the latest developments in the mathematical modeling and simulation techniques that have been reported for the characteristics and mechanisms of nutrient release from CRFs. The scope of this review includes the modeling and simulations techniques used for coated, controlled-release fertilizers.
Biofertilizers encompass microorganisms that can be applied to plants, subsequently establishing themselves within the plant's rhizosphere or internal structures. This colonization stimulates plant development by enhancing nutrient absorption from the host. While there is growing literature documenting the applications of microalgae-based and bacterial-based biofertilizers, the research focusing on the effectiveness of consortia formed by these microorganisms as short-term plant biofertilizers is notably insufficient. This study seeks to assess the effectiveness of microalgae-bacterial biofertilizers in promoting plant growth and their potential contribution to the circular economy. The review sheds light on the impact of microalgae-bacterial biofertilizers on plant growth parameters, delving into factors influencing their efficiency, microalgae-bacteria interactions, and effects on soil health. The insights from this review are poised to offer valuable guidance to stakeholders in agriculture, including farmers, environmental technologists, and businesses. These insights will aid in the development and investment in more efficient and sustainable methods for enhancing crop yields, aligning with the Sustainable Development Goals and principles of the circular economy.
A mathematical model for the reaction-diffusion equation is developed to describe the nutrient release profiles and degradation of poly(lactic acid) (PLA)-coated controlled-release fertilizer. A multi-diffusion model that consists of coupled partial differential equations is used to study the diffusion and chemical reaction (autocatalytic degradation) simultaneously. The model is solved using an analytical-numerical method. Firstly, the model equation is transformed using the Laplace transformation as the Laplace transform cannot be inverted analytically. Numerical inversion of the Laplace transform is used by employing the Zakian method. The solution is useful in predicting the nutrient release profiles at various diffusivity, concentration of extraction medium, and reaction rates. It also helps in explaining the transformation of autocatalytic concentration in the coating material for various reaction rates, times of reaction, and reaction-multi diffusion. The solution is also applicable to the other biodegradable polymer-coated controlled-release fertilizers.
This study aims to assess the environmental impacts of conventional and organic rice cultivations and proposes a sustainable conceptual framework of rice farming based on the life cycle assessment (LCA) approach. A cradle-to-gate LCA was performed by using the ReCiPe 2016 method and SimaPro 8.5 software. The functional unit was one ton of rice grains harvested. Primary data were obtained from the farmer, while secondary data were collected from Ecoinvent 3.0, the Agri Footprint 3.0 database and the literature. The total characterization factors for global warming potential (GWP), water consumption potential (WCP) and fossil fuel depletion potential (FFP) were 457.89 kg CO2-eq, 98.18 m3 and 84.56 kg oil-eq, respectively, at the midpoint level for conventional rice, while the impacts for organic rice were 140.55 kg CO2-eq, 29.45 m3 and 22.25 kg oil-eq, respectively. At the endpoint level, the total characterization factors for human health damage (HH), ecosystem damage (ED) and resource availability (RA) for conventional rice were 9.63 × 10-4 DALY, 5.54 × 10-6 species.year and 30.98 Dollar, respectively, while for organic rice, the impacts were 2.60 × 10-4 DALY, 2.28 × 10-6 species.year and 8.44 Dollar, respectively. Rice cultivation impacted the environment, particularly in relation to three impact categories: GWP, WCP and FFP. The cultivation phase of rice production was the main contributor to environmental impacts due to the production and application of fertilizer and pesticides. It can be concluded that the application of LCA in agricultural sector is able to provide information and responses for policy makers in understanding the potential environmental impacts at various spatial levels.
Sewage sludge has long been regarded as a hazardous waste by virtue of the loaded heavy metals and pathogens. Recently, more advanced technologies are introduced to make use of the nutrients from this hazardous sludge. Successful recovery of sludge's carbon content could significantly convert waste to energy and promote energy sustainability. Meanwhile, the recovery of nitrogen and trace minerals allows the production of fertilizers. This review is elucidating the performances of modern thermal treatment technologies in recovering resources from sewage sludge while reducing its environmental impacts. Exhaustive investigations show that most modern technologies are capable of recovering sludge's carbon content for energy generation. Concurrently, the technologies could as well stabilize heavy metals, destroy harmful pathogens, and reduce the volume of sludge to minimize the environmental impacts. Nevertheless, the high initial investment cost still poses a huge hurdle for many developing countries. Since the initial investment cost is inevitable, the future works should focus on improving the profit margin of thermal technologies; so that it would be more financially attractive. This can be done through process optimization, improved process design as well as the use of suitable co-substrates, additives, and catalyst as propounded in the review.
The association of arbuscular mycorrhiza fungi (AMF) and roots undoubtedly
gives positive advantages to the host plant. However, heavily fertilised soil such as in oil
palm plantation, inhibit the growth of mycorrhiza. Thus, the aim of this research is to
distinguish and quantify the availability of AMF population and propagules at different sites
of an oil palm plantation by Most Probable Number (MPN) assay. In addition, root infection
method was employed to observe host compatibility through the propagation of AMF using
two different types of hosts, monocotyledon (Echinochloa cruss-galli) and dicotyledon
(Vigna radiata). Three different locations at an oil palm plantation were chosen for
sampling. Each location was represented by a distinctive soil series, and were further
divided into two sites, that is canopy and midway area. Midway site had a greater
population of AMF compared to canopy. The result showed that different environments
affect the availability of AMF in the soil. Higher number of AMF infection observed in
monocotyledon host suggests that the fibrous root system provide a better association
with mycorrhiza.
Batu Reput’ is primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of ‘Batu Reput’ in Malaysia that content large deposit of high-purity dolomite [CaMg (CO3)2]. Pure samples of ‘Batu Reput’ recently explored in the Koperasi Rimba Mas Padang Besar Quarry were investigated for their physical, chemical and mineralogical composition. SEM and XRD analysis methods were applied. The potential of ‘Batu Reput’ as a raw material in fertilizer production was investigated in this paper.
A factorial experiment of three light intensities and three fertiliser levels was carried out on the potted seedlings of neobalanocarpus heimii as stock plants for subsequent rooting of cuttings. Light intensities used were 25%, 50% and 100% of the open sunlight and the fertilizer levels were 0 g, 1 g and 2 g plant-1 month-1. Results of 11 months after potting showed that the stock plants treated with 1 g and 2 g fertilizer had significantly better height and diameter increments than those without fertilizer in all light intensities tried. On the other hand, no significant effect of light intensity was obtained in height and diameter increments of the stock plants. Survival of stock plants of more than 86% was obtained in all light intensities tried with or without fertilizer application. Test on rooting of subsequent cuttings showed that light intensity of 25% and 0 g fertiliser, to stock plants gave the highest rooting percentage (73%) and the number of roots (2.0). The general trend showed that rooting decreased to below 60% when intensity of light was increased. In terms of size, cuttings with diameter between 1.2 mm and 2.3 mm is recommended as it yielded rooting of 65% to 75%. For practical application, a combination of 25% light intensity and 1 g of fertilizer plant-1 month-1 can be applied to the stock plants to maintain their healthy growth for continuous production of cutting materials for rooting.
One of the most significant chemical operations in the past century was the Haber-Bosch catalytic synthesis of ammonia, a fertilizer vital to human life. Many catalysts are developed for effective route of ammonia synthesis. The major challenges are to reduce temperature and pressure of process and to improve conversion of reactants produce green ammonia. The present review, briefly discusses the evolution of ammonia synthesis and current advances in nanocatalyst development. There are promising new ammonia synthesis catalysts of different morphology as well as magnetic nanoparticles and nanowires that could replace conventional Fused-Fe and Promoted-Ru catalysts in existing ammonia synthesis plants. These magnetic nanocatalyst could be basis for the production of magnetically induced one-step green ammonia and urea synthesis processes in future.
The production of oil palm (Elaeis guineensis) in Southeast Asia is vital to the economies of Indonesia and Malaysia. Both fertilisers and pesticides used in palm production can contain elevated concentrations of Trace Elements (TEs) which may accumulate in soils and leaf tissues of plants. We hypothesised that leaves from oil palms may be deficient in essential elements, while containing elevated concentrations of non-essential TEs commonly found in agrichemicals. Samples of plant materials (leaves and fruitlets) were collected from active and former plantations in Sumatra, Indonesia, and analysed for essential and non-essential elements. Indonesian palm oil samples were sourced in New Zealand and their elemental concentrations determined. Leaf materials from both active and abandoned production sites were deficient in N, K, S and Mo, while leaf materials from abandoned sites were deficient in P. These deficiencies may have been a contributing factor to the abandonment of production at these sites. Concentrations of non-essential elements were below or comparable to average plant concentrations and no evidence of contamination was found in plant tissues. Palm oil contained low concentrations of TEs, which did not pose any toxicity risks. However, Na and Al were present in concentrations of 1198 and 159 mg kg-1 respectively, which were higher than have been previously reported. Tropical oil palm production could benefit from the determination of bioaccumulation factors for fertiliser contaminants in E. guineensis, to limit the transfer of contaminants to plants and products if increased fertiliser applications were used to correct nutrient deficiencies.
Vermicomposting is a process in which earthworms are used to convert organic materials into humus-like material known as vermicompost. A number of researchers throughout the world have found that the nutrient profile in vermicompost is generally higher than traditional compost. In fact, vermicompost can enhance soil fertility physically, chemically and biologically. Physically, vermicompost-treated soil has better aeration, porosity, bulk density and water retention. Chemical properties such as pH, electrical conductivity and organic matter content are also improved for better crop yield. Nevertheless, enhanced plant growth could not be satisfactorily explained by improvements in the nutrient content of the soil, which means that other plant growth-influencing materials are available in vermicomposts. Although vermicomposts have been shown to improve plant growth significantly, the application of vermicomposts at high concentrations could impede growth due to the high concentrations of soluble salts available in vermicomposts. Therefore, vermicomposts should be applied at moderate concentrations in order to obtain maximum plant yield. This review paper discusses in detail the effects of vermicompost on soil fertility physically, chemically and biologically. Future prospects and economy on the use of organic fertilizers in the agricultural sector are also examined.