Displaying publications 1 - 20 of 129 in total

Abstract:
Sort:
  1. Fulltext Investigation of the uptake of molybdenum by plants from Argentinean groundwater
    Lawson-Wood K, Jaafar M, Felipe-Sotelo M, Ward NI
    Environ Sci Pollut Res Int, 2021 Sep;28(35):48929-48941.
    PMID: 33928502 DOI: 10.1007/s11356-021-13902-w
    Some regions of Argentina are affected by high concentrations of molybdenum, arsenic and vanadium from natural sources in their groundwater. In particular, Mo levels in groundwater from Eduardo Castex (La Pampa, Argentina) typically exceed the guidelines for drinking water formerly established by WHO at 70 μg/L. Therefore, this study investigated the uptake of Mo in plants, using cress (Lepidium sativum L.) as a model using hydroponic experiments with synthetic solutions and groundwater from La Pampa. Cress grown from control experiments (150 μg/L Mo, pH 7) presented an average Mo concentration of 35.2 mg/kg (dry weight, d.w.), higher than the typical total plant range (0.7-2.5 mg/kg d.w.) in the literature. Using pooled groundwater samples (65.0-92.5 μg/L Mo) from wells of La Pampa (Argentina) as growth solutions resulted in significantly lower cress Mo levels (1.89-4.59 mg/kg d.w.) than were obtained for synthetic solutions of equivalent Mo concentration. This may be due to the high levels in these groundwater samples of As, V, Fe and Mn which are known to be associated with volcanic deposits. This research addressed the hitherto scarcity of data about the effect of various physicochemical parameters on the uptake of Mo in plants.
    Matched MeSH terms: Drinking Water*
  2. Fulltext Determinants of Intention to Purchase Bottled Water Based on Business Online Strategy in China: The Role of Perceived Risk in the Theory of Planned Behavior
    Guo M, Tan CL, Wu L, Peng J, Ren R, Chiu CH
    Int J Environ Res Public Health, 2021 10 13;18(20).
    PMID: 34682476 DOI: 10.3390/ijerph182010729
    With the development of the network economy, especially the promotion and popularization of mobile networks, traditional offline businesses are further integrated with online businesses, promoting the development of business online strategies. However, with the growth of enterprises' business, their negative externalities on the environment have gradually become prominent, further affecting sustainable consumption. The relationships between businesses, the environment, and consumption have become the focus of attention. China's fast-growing bottled water companies face similar challenges. The pollution that occurs due to bottled water packaging poses great threats to consumers. Hence, this study extended the Theory of Planned Behavior (TPB) by integrating three risk aspects, namely, water pollution risk perception (WPRP), non-degradable package pollution risk perception (NPPRP), and false information risk perception (FIRP), to examine the consumers' perceptions toward these risk aspects before purchasing bottled water online. This study employed a cross-sectional approach to collect data from online consumers via a survey method. A total of 401 valid samples were collected and then analyzed via a structural equation model using the AMOS statistical package. The results showed that attitude (AT), subjective norm (SN), and perceived behavior control (PBC) toward online bottled water purchase had significant and positive effects on the consumers' purchase intentions (PIs). However, under the influence of risk perception, the consumers' attitudes, SNs and PBC became suppressed by WPRP, and SN became suppressed due to the impact of FIRP. Furthermore, the negative impacts of NPPRP and FIRP on PI were partially mediated by AT, SN and PBC. Meanwhile, WPRP imposed the most significant direct effect on PI. The study results will help businesses to develop better online strategies to reduce the risk perception of bottled water and provide theoretical value and practical guidance for realizing sustainable consumption.
    Matched MeSH terms: Drinking Water*
  3. Carbon-based nanomaterial intervention and efficient removal of various contaminants from effluents - A review
    Manimegalai S, Vickram S, Deena SR, Rohini K, Thanigaivel S, Manikandan S, et al.
    Chemosphere, 2023 Jan;312(Pt 1):137319.
    PMID: 36410505 DOI: 10.1016/j.chemosphere.2022.137319
    Water treatment is a worldwide issue. This review aims to present current problems and future challenges in water treatments with the existing methodologies. Carbon nanotube production, characterization, and prospective uses have been the subject of considerable and rigorous research around the world. They have a large number of technical uses because of their distinct physical characteristics. Various catalyst materials are used to make carbon nanotubes. This review's primary focus is on integrated and single-treatment technologies for all kinds of drinking water resources, including ground and surface water. Inorganic non-metallic matter, heavy metals, natural organic matter, endocrine-disrupting chemicals, disinfection by-products and microbiological pollutants are among the contaminants that these treatment systems can remediate in polluted drinking water resources. Significant advances in the antibacterial and adsorption capabilities of carbon-based nanomaterials have opened up new options for excluding organic/inorganic and biological contaminants from drinking water in recent years. The advancements in multifunctional nanocomposites synthesis pave the possibility for their use in enhanced wastewater purification system design. The adsorptive and antibacterial characteristics of six main kinds of carbon nanomaterials are single-walled carbon nanotubes, multi-walled carbon nanotubes, graphene, graphene oxide, fullerene and single-walled carbon nanohorns. This review potentially addressed the essential metallic and polymeric nanocomposites, are described and compared. Barriers to use these nanoparticles in long-term water treatment are also discussed.
    Matched MeSH terms: Drinking Water*
  4. Technical-economic framework for designing of water pumping system based on photovoltaic clean energy with water storage for drinking application
    Naderipour A, Nowdeh SA, Babanezhad M, Najmi ES, Kamyab H, Abdul-Malek Z
    Environ Sci Pollut Res Int, 2023 Jun;30(28):71754-71765.
    PMID: 34499303 DOI: 10.1007/s11356-021-16342-8
    In this paper, the technical-economic framework for designing of water pumping system based on photovoltaic clean energy with water tank storage is presented to supply drinking water of customers for remote areas. The objective function is to minimize the net present cost (NPC) (as economic index) including initial investment costs, maintenance, and replacement costs, and reliability constraint is defined as customer's water not supplied probability (CWNSP) as technical index. A meta-heuristic intelligent water drops algorithm (IWDA) is proposed to optimize the solar water pumping system considering NPC and CWNSP with high accuracy and speed of optimization in achieving the global solution. The simulation results show that the proposed method is capable of responding to customer's water demand by optimally sizing components and water storage tank based on IWDA which is inspired based on flowing the water drops in rivers by achieving the lowest cost with optimal reliability. The NPC of the system with CWNSP equal to 3.17 % is obtained 0.24 M$ for 6-m-high water extraction. The results showed that with increasing the water extraction height, the NPC increased, and the reliability also weakened. Moreover, the superiority of the IWDA is confirmed compared with particle swarm optimization (PSO) in designing a water pumping system with the lowest NPC.
    Matched MeSH terms: Drinking Water*
  5. A sustainable approach for fluoride treatment using coconut fiber cellulose as an adsorbent
    Hussain A, Maitra J, Saifi A, Ahmed S, Ahmed J, Shrestha NK, et al.
    Environ Res, 2024 Mar 01;244:117952.
    PMID: 38113992 DOI: 10.1016/j.envres.2023.117952
    In developing countries like India, an economically viable and ecologically approachable strategy is required to safeguard the drinking water. Excessive fluoride intake through drinking water can lead to dental fluorosis, skeletal fluorosis, or both. The present study has been under with an objective to investigate the feasibility of using cellulose derived from coconut fiber as an adsorbent under varying pH conditions for fluoride elimination from water. The assessment of equilibrium concentration of metal ions using adsorption isotherms is an integral part of the study. This present finding indicates the considerable effect of variation of adsorbent dosages on the fluoride removal efficiency under constant temperature conditions of 25 ± 2 °C with a contact period of 24 h. It is pertinent to mention that maximum adsorption of 88% has been observed with a pH value of 6 with 6 h time duration with fluoride dosage of 50 mg/L. The equilibrium concentration dwindled to 0.4 mg/L at fluoride concentration of 20 mg/L. The Langmuir model designates the adsorption capacity value of 2.15 mg/L with initial fluoride concentration of 0.21 mg/g with R2 value of 0.660. Similarly, the adsorption capacity using Freundlich isotherms is found to be 0.58 L/g and 0.59 L/g with fluoride concentration of 1.84 mg/L and 2.15 mg/L respectively. The results from the present study confirm that coconut fiber possesses appropriate sorption capabilities of fluoride ion but is a pH dependent phenomenon. The outcomes of the study indicate the possible use of cellulose extracted from waste coconut fiber as a low-cost fluoride adsorbent. The present study can be well implemented on real scale systems as it will be beneficial economically as well as environmentally.
    Matched MeSH terms: Drinking Water*
  6. Drinking water quality status in Malaysia: a scoping review of occurrence, human health exposure, and potential needs
    Praveena SM, Aris AZ, Hashim Z, Hashim JH
    J Expo Sci Environ Epidemiol, 2024 Jan;34(1):161-174.
    PMID: 37563210 DOI: 10.1038/s41370-023-00585-3
    BACKGROUND: Like other countries, surface water degradation in Malaysia is linked with common global issues. Although different aspects of drinking water suitability have been examined, the overall understanding of drinking water quality in Malaysia is poor.

    OBJECTIVE: Hence, the present review aims to provide an understanding of drinking water (tap water, groundwater, gravity feed system) quality and its potential implications on policy, human health, and drinking water management law and identification of potential direction of future drinking water research and management needs in Malaysia.

    METHODS: This study utilized a scoping review method. PRISMA Extension for Scoping Reviews was used for search strategy. Relevant studies were screened using the selected keywords and databases.

    RESULTS: A total of 26 drinking water quality studies involving tap water, groundwater, and gravity feed systems have been selected for review. These studies found that the majority of Malaysian Drinking Water and WHO Drinking Water standards have been met. High levels of Cu, Cd, Fe and Pb were attributable to galvanized plumbing and pipe material corrosion. Variation of fluoride in tap water depends on dosage planning and operational processes of the public water supply. Pollutants (nitrate and ammonia) in groundwater and gravity feed system water have been linked to agricultural practices in rural areas. Microbiological quality in tap water is associated with growing biofilms inside the pipelines while in groundwater is caused by shallow surface events. However, only eight studies have reported about the human risks of chemical pollutants in tap water.

    IMPACT STATEMENT: The review discusses the state of drinking water quality in Malaysia and its impact on public health. It suggests that policymakers can use this information to improve the quality of drinking water and enforce restrictions, while also raising public awareness about the importance of safe drinking water. The study can guide future research and initiatives in Malaysia, ultimately contributing to efforts to ensure access to clean and dependable drinking water.

    Matched MeSH terms: Drinking Water*
  7. Occurrence of pesticides in surface water, pesticides removal efficiency in drinking water treatment plant and potential health risk to consumers in Tengi River Basin, Malaysia
    Elfikrie N, Ho YB, Zaidon SZ, Juahir H, Tan ESS
    Sci Total Environ, 2020 Apr 10;712:136540.
    PMID: 32050383 DOI: 10.1016/j.scitotenv.2020.136540
    Agricultural activities have been arising along with the use of pesticides. The use of pesticides can impact not only on vector or other pest but also able to harm human health. Pesticide may leach from the irrigation of plant into the groundwater and in surface water. These waters could be sources of drinking water in a pesticides polluted area. This study aims to determine the occurrence pesticides in surface water and pesticides removal efficiency in a conventional drinking water treatment plant (DWTP) and the potential health risk to consumers. The study was conducted in Tanjung Karang, Selangor, Malaysia. Thirty river water samples and eighteen water samples from DWTP were collected. The water samples were extracted using solid phase extraction (SPE) before injected to the ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). Five hundreds and ten respondents were interviewed using questionnaires to obtain information for health risk assessments. The results showed that propiconazole had the highest mean concentration (4493.1 ng/L) while pymetrozine had the lowest mean concentration (1.3 ng/L) in river water samples. The pesticides removal efficiencies in the conventional DWTP were 77% (imidacloprid), 86% (propiconazole and buprofezin), 88% (tebuconazole) and 100% (pymetrozine, tricyclazole, chlorantraniliprole, azoxystrobin and trifloxystrobin), respectively. The hazard quotients (HQs) and hazard index (HI) for all target pesticides were <1, indicating there was no significant chronic non-carcinogenic health risk due to consumption of the drinking water. Conventional DWTP was not able to completely remove four pesticide; thus, advanced treatment systems need to be considered to safeguard the health of the community in future.
    Matched MeSH terms: Drinking Water/chemistry*
  8. Fulltext Assessing Cadmium and Chromium Concentrations in Drinking Water to Predict Health Risk in Malaysia
    Ahmed MF, Mokhtar MB
    Int J Environ Res Public Health, 2020 04 24;17(8).
    PMID: 32344678 DOI: 10.3390/ijerph17082966
    Although toxic Cd (cadmium) and Cr (chromium) in the aquatic environment are mainly from natural sources, human activities have increased their concentrations. Several studies have reported higher concentrations of Cd and Cr in the aquatic environment of Malaysia; however, the association between metal ingestion via drinking water and human health risk has not been established. This study collected water samples from four stages of the drinking water supply chain at Langat River Basin, Malaysia in 2015 to analyze the samples by inductivity coupled plasma mass spectrometry. Mean concentrations of Cd and Cr and the time-series river data (2004-2014) of these metals were significantly within the safe limit of drinking water quality standard proposed by the Ministry of Health Malaysia and the World Health Organization. Hazard quotient (HQ) and lifetime cancer risk (LCR) values of Cd and Cr in 2015 and 2020 also indicate no significant human health risk of its ingestion via drinking water. Additionally, management of pollution sources in the Langat Basin from 2004 to 2015 decreased Cr concentration in 2020 on the basis of autoregression moving average. Although Cd and Cr concentrations were found to be within the safe limits at Langat Basin, high concentrations of these metals have been found in household tap water, especially due to the contamination in the water distribution pipeline. Therefore, a two-layer water filtration system should be introduced in the basin to achieve the United Nations Sustainable Development Goals (SDGs) 2030 agenda of a better and more sustainable future for all, especially via SDG 6 of supplying safe drinking water at the household level.
    Matched MeSH terms: Drinking Water*
  9. Fulltext A sensitive and rapid determination of zinc ion (Zn2+) using electrochemical sensor based on f-MWCNTs/CS/PB/AuE in drinking water
    Ringgit G, Siddiquee S, Saallah S, Mohamad Lal MT
    Sci Rep, 2022 Nov 03;12(1):18582.
    PMID: 36329094 DOI: 10.1038/s41598-022-21926-6
    An electrochemical method for detecting the presence of zinc (Zn2+) ions in drinking water was developed using functionalized multi-walled carbon nanotubes (f-MWCNTs) and chitosan (CS). Numerous cylinder-shaped graphene molecules make up f-MWCNTs, which have a high mechanical and electrical conductivity. CS benefits from nanomaterials include biocompatibility, biodegradability, and low toxicity, which are excellent in capacity absorption of metal ions. Dangerous levels of metal ions such as zinc are currently present in drinking water as a result of human and natural activity. Zinc toxicity is associated with a variety of disorders, including Alzheimer's, Parkinson's, diabetes, and cancer. This study incorporated f-MWCNTs and CS with Prussian blue (PB) immobilised on a gold electrode (AuE). Several parameters, including as buffers, pH, scan rate, redox indicator, accumulation time, and volume, were optimised using the cyclic voltammetry (CV) method. According to the CV method, the optimal parameters were phosphate buffered saline (0.1 M, pH 2), 5 mM Prussian blue, 200 mVs-1 scan rate, and 5 s accumulation time. Under ideal circumstances, the differential pulse voltammetry (DPV) method was used to determine the Zn2+ ions concentration range of 0.2-7.0 ppm. The limit of detection (LOD) was 2.60 × 10-7 mol L-1 with a correlation coefficient of R2 = 0.9777. The recovery rate of the developed sensor (f-MWCNTs/CS/PB/AuE) ranged from 95.78 to 98.96%. The developed sensor showed a variety of advantages for detecting Zn2+ in drinking water, including a quick setup process, quick detection, high sensitivity, and mobility. This study developed the essential sensor for monitoring Zn2+ levels in drinking water in the future.
    Matched MeSH terms: Drinking Water*
  10. Fulltext Occurrence of endocrine disruptors in Malaysia's water systems: A scoping review
    Khairul Hasni NA, Anual ZF, Rashid SA, Syed Abu Thahir S, Veloo Y, Fang KS, et al.
    Environ Pollut, 2023 May 01;324:121095.
    PMID: 36682614 DOI: 10.1016/j.envpol.2023.121095
    Contamination of water systems with endocrine disrupting chemicals (EDCs) is becoming a major public health concern due to their toxicity and ubiquity. The intrusion of EDCs into water sources and drinking water has been associated with various adverse health effects on humans. However, there is no comprehensive overview of the occurrence of EDCs in Malaysia's water systems. This report aims to describe the occurrence of EDCs and their locations. Literature search was conducted electronically in two databases (PubMed and Scopus). A total of 41 peer-reviewed articles published between January 2000 and May 2021 were selected. Most of the articles dealt with pharmaceuticals (16), followed by pesticides (7), hormones (7), mixed compounds (7), and plasticisers (4). Most studies (40/41) were conducted in Peninsular Malaysia, with 60.9% in the central region and almost half (48.8%) in the Selangor State. Only one study was conducted in the northern region and East Malaysia. The Langat River, the Klang River, and the Selangor River were among the most frequently studied EDC-contaminated surface waters, while the Pahang River and the Skudai River had the highest concentrations of some of the listed compounds. Most of the risk assessments resulted in a hazard quotient (HQ) and a risk quotient (RQ)  1 in the Selangor River. An RQ > 1 for combined pharmaceuticals was found in Putrajaya tap water. Overall, this work provides a comprehensive overview of the occurrence of EDCs in Malaysia's water systems. The findings from this review can be used to mitigate risks and strengthen legislation and policies for safer drinking water.
    Matched MeSH terms: Drinking Water*
  11. Drinking water, sanitation, and hygiene (WASH) situation in primary schools of Pakistan: the impact of WASH-related interventions and policy on children school performance
    Ahmed J, Wong LP, Chua YP, Hydrie MZI, Channa N
    Environ Sci Pollut Res Int, 2022 Jan;29(1):1259-1277.
    PMID: 34355319 DOI: 10.1007/s11356-021-15681-w
    The United Nation's Sustainable Development Goals include the target of ensuring access to water and sanitation and hygiene (WASH) for all; however, very few studies have assessed comprehensive school WASH service in Pakistan. The purpose of this study was to identify WASH services in primary schools of Pakistan, and to assess how recent WASH interventions and policies are associated with the school's academic performance. A representative cross-sectional study was conducted in primary schools in the Sindh province of Pakistan. Structured observations and interviews were done to ascertain the schools' WASH conditions. The primary exposures of interest were the implementation of previous WASH interventions and National WASH policy in the school and the WASH coverage. Outcomes of interest included WASH conditions and school performance. The structural equation modeling (SEM) using a bootstrap resampling procedure was employed to characterize how WASH exposures were associated with WASH conditions and school performance. Data were collected from 425 schools. The Basic WASH facilities coverage in the primary schools of Sindh remains overall low according to WHO WASH service ladder criteria. Also, inconsistency in all three inclusive domains of WASH (availability, accessibility, and functionality) facilities were found. The school performance was significantly associated (P<0.001) with the presence of WASH interventions and/or WASH policy, while WASH policy and/or recent WASH intervention at the school were not associated with overall water quality. Our assessment unveiled several WASH gaps that exist, including high heavy metal and fecal contamination. Adoption of national WASH policy and financing of evidence-based WASH interventions are recommended in primary schools to improve educational outcomes.
    Matched MeSH terms: Drinking Water*
  12. Fulltext Arsenic in drinking water, hair, and prevalence of arsenicosis in Perak, Malaysia
    Ramly N, Ahmad Mahir HM, Wan Azmi WNF, Hashim Z, Hashim JH, Shaharudin R
    Front Public Health, 2023;11:998511.
    PMID: 36875418 DOI: 10.3389/fpubh.2023.998511
    Arsenic is a carcinogen element that occurs naturally in our environment. Humans can be exposed to arsenic through ingestion, inhalation, and dermal absorption. However, the most significant exposure pathway is via oral ingestion. Therefore, a comparative cross-sectional study was conducted to determine the local arsenic concentration in drinking water and hair. Then, the prevalence of arsenicosis was evaluated to assess the presence of the disease in the community. The study was conducted in two villages, namely Village AG and Village P, in Perak, Malaysia. Socio-demographic data, water consumption patterns, medical history, and signs and symptoms of arsenic poisoning were obtained using questionnaires. In addition, physical examinations by medical doctors were performed to confirm the signs reported by the respondents. A total of 395 drinking water samples and 639 hair samples were collected from both villages. The samples were analyzed using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) to determine arsenic concentration. The results showed that 41% of water samples from Village AG contained arsenic concentrations of more than 0.01 mg/L. In contrast, none of the water samples from Village P exceeded this level. Whilst, for hair samples, 85 (13.5%) of total respondents had arsenic levels above 1 μg/g. A total of 18 respondents in Village AG had at least one sign of arsenicosis and hair arsenic levels of more than 1 μg/g. Factors significantly associated with increased arsenic levels in hair were female, increasing age, living in Village AG and smoking. The prevalence of arsenicosis in the exposed village indicates chronic arsenic exposure, and immediate mitigation action needs to be taken to ensure the wellbeing of the residents in the exposed village.
    Matched MeSH terms: Drinking Water*
  13. From tap to table: An assessment of drinking water quality in Perak, Malaysia
    Ibrahim TNBT, Feisal NAS, Azmi NM, Nazli SN, Salehuddin ASM, Nasir NICM, et al.
    Med J Malaysia, 2024 Mar;79(Suppl 1):14-22.
    PMID: 38555880
    INTRODUCTION: A study on the quality of drinking water was conducted at Air Kuning Treatment Plant In Perak, Malaysia, based on a sanitary survey in 14 sampling points stations from the intake area to the auxiliary points. This was to ensure the continuous supply of clean and safe drinking water to the consumers for public health protection. The objective was to examine the physical, microbiological, and chemical parameters of the water, classification at each site based on National Drinking Water Standards (NDWQS) and to understand the spatial variation using environmetric technique; principal component analysis (PCA).

    MATERIALS AND METHODS: Water samples were subjected to in situ and laboratory water quality analyses and focused on pH, turbidity, chlorine, Escherichia coli, total coliform, total hardness, iron (Fe), aluminium (Al), zinc (Zn), magnesium (Mg) and sodium (Na). All procedures followed the American Public Health Association (APHA) testing procedures.

    RESULTS: Based on the results obtained, the values of each parameter were found to be within the safe limits set by the NDWQS except for total coliform and iron (Fe). PCA has indicated that turbidity, total coliform, E. coli, Na, and Al were the major factors that contributed to the drinking water contamination in river water intake.

    CONCLUSION: Overall, the water from all sampling point stations after undergoing water treatment process was found to be safe as drinking water. It is important to evaluate the drinking water quality of the treatment plant to ensure that consumers have access to safe and clean drinking water as well as community awareness on drinking water quality is essential to promote public health and environmental protection.

    Matched MeSH terms: Drinking Water*
  14. Fulltext Sanitation, water, energy use, and traffic volume affect environmental quality: Go-for-green developmental policies
    Khalil L, Abbas S, Hussain K, Zaman K, Iswan, Salamun H, et al.
    PLoS One, 2022;17(8):e0271017.
    PMID: 36026488 DOI: 10.1371/journal.pone.0271017
    Carbon emissions are primarily the result of human activity in urban areas. Inadequate sanitary facilities, contaminated drinking water, nonrenewable energy, and high traffic congestion have all impacted the natural ecosystem. Using data from 1975 to 2019, the study assessed the impact of the aforementioned variables on Pakistan's carbon emissions in light of this crucial fact. The ARDL cointegration method was used to estimate the short- and long-run parameter estimates. Urban sanitation challenges and energy consumption increase carbon emissions, which affects the natural environment by raising a country's carbon intensity. Economic expansion confirmed the inverted U-shaped relationship between carbon emissions and economic growth to verify the Environmental Kuznets Curve (EKC) hypothesis in the long run. In contrast, the monotonically rising function of carbon emissions provides evidence of the nation's economic development in the short run. Access to clean drinking water improves population health and encourages the purchase of eco-friendly products. The government must improve sanitation services and use renewable energy sources to enhance air quality.
    Matched MeSH terms: Drinking Water*
  15. Fulltext Evaluation of selected metal elements in commercial drinking water and tap water in Peninsular Malaysia
    Khoo, Hock-Eng, Azrina Azlan, Mohd Aizat Idris, Amin Ismail, Muhammad Rizal Razman
    Jurnal Sains Kesihatan Malaysia, 2011;9(1):5-11.
    MyJurnal
    The present study was carried out to determine the concentrations of selected metal elements (lead, copper, manganese, zinc and iron) in 51 samples of commercial drinking water and tap water available in Malaysia. The results indicated that low metal elements were found in the studied water samples. Lead, manganese, zinc and iron were not detected in some of the studied samples, except copper. The concentrations of the metal elements in the studied samples were well below the maximum permitted concentrations as recommended. Therefore these drinking water are safe for consumption and do not pose adverse effect to the health of consumers due to metal toxicity.
    Matched MeSH terms: Drinking Water
  16. Preliminary assessment on the hydrogeochemistry of Kapas Island, Terengganu
    Noorain Mohd Isa, Ahmad Zaharin Aris
    Sains Malaysiana, 2012;41:23-32.
    Classified as a small island, Kapas Island experiences major problems especially in supplying freshwater where groundwater abstraction is the only way to meet the demand of drinking water and domestic use. Groundwater samples were collected from seven constructed boreholes to examine the hydrochemistry properties of major ions and in-situ parameters as these could provide a basis for future reference. The chemical composition showed strong and significant correlation for each studied parameter; an indication of the effect of environmental variables to the groundwater composition. The composition changed from Ca-rich to Na-rich are explained mostly by mixing and cation exchange processes. This study provided an input for water management at Kapas Island where groundwater is a crucial resource to maintain the hydrogeological balance of the island.
    Matched MeSH terms: Drinking Water
  17. Acute ingestion of hydrogen-rich water does not improve incremental treadmill running performance in endurance-trained athletes
    Ooi CH, Ng SK, Omar EA
    Appl Physiol Nutr Metab, 2020 May;45(5):513-519.
    PMID: 31675478 DOI: 10.1139/apnm-2019-0553
    There is emerging evidence that hydrogen-rich water (H2-water) has beneficial effects on the physiological responses to exercise. However, few studies investigate its ergogenic potential. This randomized controlled trial examined the effects of H2-water ingestion on physiological responses and exercise performance during incremental treadmill running. In a double-blind crossover design, 14 endurance-trained male runners (age, 34 ± 4 years; body mass, 63.1 ± 7.2 kg; height, 1.72 ± 0.05 m) were randomly assigned to ingest 2 doses of 290-mL H2-water or placebo on each occasion. The first bolus was given before six 4-min submaximal running bouts, and the second bolus was consumed before the maximal incremental running test. Expired gas, heart rate (HR), and ratings of perceived exertion (RPE) were recorded; blood samples were collected at the end of each submaximal stage and post maximal running test. Cardiorespiratory responses, RPE, and blood gas indices were not significantly different at each submaximal running intensity (range: 34%-91% maximal oxygen uptake) between H2-water and placebo trials. No statistical difference was observed in running time to exhaustion (618 ± 126 vs. 619 ± 113 s), maximal oxygen uptake (56.9 ± 4.4 vs. 57.1 ± 4.7 mL·kg-1·min-1), maximal HR (184 ± 7 vs. 184 ± 7 beat·min-1), and RPE (19 ± 1 vs. 19 ± 1) in the runners between the trials. The results suggest that the ingestion of 290 mL of H2-water before submaximal treadmill running and an additional dose before the subsequent incremental running to exhaustion were not sufficiently ergogenic in endurance-trained athletes. Novelty Acute ingestion of H2-water does not seem to be ergogenic for endurance performance. A small dose of H2-water does not modulate buffering capacity during intense endurance exercise in athletes.
    Matched MeSH terms: Drinking Water/chemistry*
  18. Fulltext Quantitative Microbial Risk Assessment of Drinking Water Quality to Predict the Risk of Waterborne Diseases in Primary-School Children
    Ahmed J, Wong LP, Chua YP, Channa N, Mahar RB, Yasmin A, et al.
    Int J Environ Res Public Health, 2020 04 17;17(8).
    PMID: 32316585 DOI: 10.3390/ijerph17082774
    Primary-school children in low- and middle-income countries are often deprived of microbiologically safe water and sanitation, often resulting in a high prevalence of gastrointestinal diseases and poor school performance. We used Quantitative Microbial Risk Assessment (QMRA) to predict the probability of infection in schoolchildren due to consumption of unsafe school water. A multistage random-sampling technique was used to randomly select 425 primary schools from ten districts of Sindh, Pakistan, to produce a representative sample of the province. We characterized water supplies in selected schools. Microbiological testing of water resulted in inputs for the QMRA model, to estimate the risks of infections to schoolchildren. Groundwater (62%) and surface water (38%) were identified as two major sources of drinking water in the selected schools, presenting varying degrees of health risks. Around half of the drinking-water samples were contaminated with Escherichia coli (49%), Shigella spp. (63%), Salmonella spp. (53%), and Vibrio cholerae (49%). Southern Sindh was found to have the highest risk of infection and illness from Campylobacter and Rotavirus. Central and Northern Sindh had a comparatively lower risk of waterborne diseases. Schoolchildren of Karachi were estimated to have the highest probability of illness per year, due to Campylobacter (70%) and Rotavirus (22.6%). Pearson correlation was run to assess the relationship between selected pathogens. V. cholerae was correlated with Salmonella spp., Campylobacter, Rotavirus, and Salmonella spp. Overall, the risk of illness due to the bacterial infection (E. coli, Salmonella spp., V. cholerae, Shigella, and Campylobacter) was high. There is a dire need for management plans in the schools of Sindh, to halt the progression of waterborne diseases in school-going children.
    Matched MeSH terms: Drinking Water*
  19. Active pharmaceutical ingredients in Malaysian drinking water: consumption, exposure, and human health risk
    Wee SY, Haron DEM, Aris AZ, Yusoff FM, Praveena SM
    Environ Geochem Health, 2020 Oct;42(10):3247-3261.
    PMID: 32328897 DOI: 10.1007/s10653-020-00565-8
    Active pharmaceutical ingredients (APIs) are typical endocrine disruptors found in common pharmaceuticals and personal care products, which are frequently detected in aquatic environments, especially surface water treated for drinking. However, current treatment technologies are inefficient for removing emerging endocrine disruptors, leading to the potential contamination of tap water. This study employed an optimized analytical method comprising solid-phase extraction and liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) to detect APIs in tap water in Putrajaya, Malaysia. Several therapeutic classes of pharmaceuticals and personal care products, including anti-inflammatory drugs (dexamethasone and diclofenac), antibiotics (sulfamethoxazole and triclosan), antiepileptics (primidone), antibacterial agents (ciprofloxacin), beta-blockers (propranolol), psychoactive stimulants (caffeine), and antiparasitic drugs (diazinon), were detected in the range of water pollutants. Diclofenac accounted for the highest concentration (21.39 ng/L), followed by triclosan and ciprofloxacin (9.74 ng/L and 8.69 ng/L, respectively). Caffeine was observed in all field samples with the highest distribution at 35.32%. Caffeine and triclosan exhibited significantly different distributions in household tap water (p water; however, the estimated risk was negligible (risk quotient water quality monitoring indicators for water resource conservation and water supply safety related to emerging organic contaminants; thus, API detection is important for safeguarding the environment and human health.
    Matched MeSH terms: Drinking Water/analysis*
  20. Pharmaceuticals, hormones, plasticizers, and pesticides in drinking water
    Wee SY, Ismail NAH, Haron DEM, Yusoff FM, Praveena SM, Aris AZ
    J Hazard Mater, 2022 02 15;424(Pt A):127327.
    PMID: 34600377 DOI: 10.1016/j.jhazmat.2021.127327
    Humans are exposed to endocrine disrupting compounds (EDCs) in tap water via drinking water. Currently, most of the analytical methods used to assess a long list of EDCs in drinking water have been made available only for a single group of EDCs and their metabolites, in contrast with other environmental matrices (e.g., surface water, sediments, and biota) for which more robust methods have been developed that allow detection of multiple groups. This study reveals an analytical method of one-step solid phase extraction, incorporated together with liquid chromatography-tandem mass spectrometry for the quantification of multiclass EDCs (i.e., pharmaceuticals, hormones, plasticizers, and pesticides) in drinking water. Fifteen multiclass EDCs significantly varied in amount between field samples (p water is unlikely to pose a health risk (risk quotient < 1). This method serves as an analytical protocol for tracing multiclass EDC contamination in tap water as part of a multibarrier approach to ensure safe drinking water for good health and well-being. It represents a simpler one-step alternative tool for drinking water analysis, thereby avoiding the time-consuming and expensive multi-extraction steps that are generally needed for analyzing multiclass EDCs.
    Matched MeSH terms: Drinking Water*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links