Displaying all 10 publications

Abstract:
Sort:
  1. Kaur G, Thomas AR, Samson RS, Varghese E, Ponraj RR, Nagraj SK, et al.
    BMC Oral Health, 2024 May 04;24(1):532.
    PMID: 38704529 DOI: 10.1186/s12903-024-04259-w
    BACKGROUND: Successful endodontic treatment needs accurate determination of working length (WL). Electronic apex locators (EALs) were presented as an alternative to radiographic methods; and since then, they have evolved and gained popularity in the determination of WL. However, there is insufficient evidence on the post-operative pain, adequacy, and accuracy of EALs in determining WL.

    OBJECTIVE: The systematic review and meta-analysis aims to gather evidence regarding the effectiveness of EALs for WL determination when compared to different imaging techniques along with postoperative pain associated with WL determination, the number of radiographs taken during the procedure, the time taken, and the adverse effects.

    METHODS: For the review, clinical studies with cross-over and parallel-arm randomized controlled trials (RCTs) were searched in seven electronic databases, followed by cross-referencing of the selected studies and related research synthesis. Risk of bias (RoB) assessment was carried out with Cochrane's RoB tool and a random-effects model was used. The meta-analysis was performed with the RevMan software 5.4.1.

    RESULTS: Eleven eligible RCTs were incorporated into the review and eight RCTs into the meta-analysis, of which five had high RoB and the remaining six had unclear RoB. Following meta-analysis, no significant difference in postoperative pain was found among the EAL and radiograph groups (SMD 0.00, CI .29 to .28, 354 participants; P value = 0.98). Radiograph group showed better WL accuracy (SMD 0.55, CI .11 to .99, 254 participants; P value = 0.02), while the EAL group had 10% better WL adequacy (RR 1.10, CI 1.03-1.18, 573 participants; P value = 0.006).

    CONCLUSION: We found very low-certainty evidence to support the efficacy of different types of EAL compared to radiography for the outcomes tested. We were unable to reach any conclusions about the superiority of any type of EAL. Well-planned RCTs need to be conducted by standardizing the outcomes and outcome measurement methods.

    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology
  2. Ahmed HMA, Neelakantan P, Dummer PMH
    Int Endod J, 2018 Feb;51(2):164-176.
    PMID: 28635100 DOI: 10.1111/iej.12800
    Thorough knowledge of anatomical complexities of the root canal system has a direct impact on the effectiveness of canal preparation and filling, and is an essential prerequisite for successful root canal treatment. A wide range of complex variations in root canal anatomy exists, including root canal configuration type, developmental anomalies and minor canal morphology such as accessory canals and apical deltas. Accessory canals and apical deltas have been associated with pulp disease, primary canal infection, canal reinfection and post-treatment disease. The current definitions of accessory canal anatomy are not standardized and potentially confusing. Given their role in endodontic disease and their impact on treatment outcomes, there is a need to have a simple classification of their anatomy to provide an accurate description of their position and path from the canal to the external surface of the root. The purpose of this article is to introduce a new system for classifying accessory canal morphology for use in research, clinical practice and training.
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology*
  3. Al-Rammahi HM, Chai WL, Nabhan MS, Ahmed HMA
    BMC Oral Health, 2023 May 29;23(1):339.
    PMID: 37248469 DOI: 10.1186/s12903-023-03036-5
    BACKGROUND: A thorough understanding of root and canal anatomy is crucial for successful root canal treatment outcomes. This systematic review aims to explore the published micro-CT studies investigated the anatomy of root and canal system in permanent mandibular first molars.

    METHOD: An electronic search was performed on Web of science, PubMed, and Scopus. Micro-CT journal studies investigated the root and canal anatomy of permanent double-rooted mandibular first molars were included. Data on study characteristics, objectives of interest, specifications of the studies, and micro-CT specifications were extracted. Risk of bias assessment (ROB) of the included studies was performed using Anatomical Quality Assessment (AQUA) tool. The extracted data were presented in tables and figures to present and synthesise the results. A meta-analysis was performed for the studies related to the prevalence of Vertucci's canal configurations, middle mesial canal (MMC) configurations, and Fan's isthmus types.

    RESULTS: Amongst 1358 identified studies, thirty met the inclusion criteria. In terms of the objectives, the selected studies showed high anatomical variability in mandibular first molars. Twenty-two (73%), 25 (83%), and 12 (40%) of the studies reported the population/ethnicity, micro-CT specifications, and ethical approval, respectively. 28 (93%) studies did not disclose the method of sample size estimation. In only 6 (20%) of the studies, the authors had calibrated the assessment approaches. Mostly, a potential ROB was reported in domain 1 (objective(s) and subject characteristics) and domain 3 (methodology characterization). Whilst, low risk was reported in domains 2 (study design), 4 (descriptive anatomy), and 5 (reporting of results). The overall ROB was reported to be ''moderate'' in the vast majority of the studies (27/30). Meta-analysis results showed high levels of heterogeneity among the studies related to MMCs (I2 = 86%) and Fan's isthmus (I2 = 87%). As for the root canal configuration, pooled prevalence showed that Vertucci type IV and type I were the most prevalent in mesial and distal root canals, respectively.

    CONCLUSION: Based on moderate risk of bias level of evidence, micro-CT studies have shown wide range of qualitative and quantitative data presentations of the roots and canals in mandibular first molars. Protocol and registration. The protocol of this systematic review was prospectively registered in the Open Science Framework database ( https://osf.io ) on 2022-06-20 with the registration number 10.17605/OSF.IO/EZP7K.

    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology
  4. Karobari MI, Ahmed HMA, Khamis MFB, Ibrahim N, Noorani TY
    J Dent Educ, 2023 Aug;87(8):1089-1098.
    PMID: 37164913 DOI: 10.1002/jdd.13236
    PURPOSE: To assess the application and accuracy of two systems (Vertucci et al. 1974 and Ahmed et al. 2017) in classifying the root and canal morphology of human dentition among final-year undergraduates, interns, and postgraduate dental students in India.

    METHODS: The survey was conducted using physical and online presentation modes in two phases. Phase 1; PowerPoint presentation (PPT), describing the most used classification system (Vertucci et al. 1974) and its supplementary types and Ahmed et al. (2017) classification. A single presenter delivered the PPT to participants, using either a projector in an auditorium/seminar hall (face-to-face) or an online platform (zoom meeting software). Phase 2 involved determining the students' responses. A questionnaire was distributed amongst the participants after the lecture and collected for analysis. Fisher's exact test was used to analyze the data statistically, and the significance level was set at 0.05 (p dental students, and interns in India agreed that Ahmed et al. classification system is more practical and accurate for classifying the root and canal morphology.

    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology
  5. Ahmed HMA, Versiani MA, De-Deus G, Dummer PMH
    Int Endod J, 2017 Aug;50(8):761-770.
    PMID: 27578418 DOI: 10.1111/iej.12685
    Knowledge of root and root canal morphology is a prerequisite for effective nonsurgical and surgical endodontic treatments. The external and internal morphological features of roots are variable and complex, and several classifications have been proposed to define the various types of canal configurations that occur commonly. More recently, improvements in nondestructive digital image systems, such as cone-beam and micro-computed tomography, as well as the use of magnification in clinical practice, have increased the number of reports on complex root canal anatomy. Importantly, using these newer techniques, it has become apparent that it is not possible to classify many root canal configurations using the existing systems. The purpose of this article is to introduce a new classification system that can be adapted to categorize root and root canal configurations in an accurate, simple and reliable manner that can be used in research, clinical practice and training.
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology*
  6. Ahmed HM, Khamis MF, Gutmann JL
    Scanning, 2016 Nov;38(6):554-557.
    PMID: 26751249 DOI: 10.1002/sca.21299
    The root and root canal morphology of deciduous molars shows considerable variations. Consequently, a comprehensive understanding of the normal and unusual root and root canal configuration types in deciduous teeth is of prime importance. The purpose of this report is to describe a rare anatomical variation in a double-rooted maxillary deciduous molar examined by the dental operating microscope and micro-computed tomography. SCANNING 38:554-557, 2016. © 2016 Wiley Periodicals, Inc.
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology*
  7. Tiong TJ, Price GJ, Kanagasingam S
    Ultrason Sonochem, 2014 Sep;21(5):1858-65.
    PMID: 24735986 DOI: 10.1016/j.ultsonch.2014.03.024
    One of the uses of ultrasound in dentistry is in the field of endodontics (i.e. root canal treatment) in order to enhance cleaning efficiency during the treatment. The acoustic pressures generated by the oscillation of files in narrow channels has been calculated using the COMSOL simulation package. Acoustic pressures in excess of the cavitation threshold can be generated and higher values were found in narrower channels. This parallels experimental observations of sonochemiluminescence. The effect of varying the channel width and length and the dimensions and shape of the file are reported. As well as explaining experimental observations, the work provides a basis for the further development and optimisation of the design of endosonic files.
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology
  8. Ahmed HM, Abbott PV
    Aust Dent J, 2012 Jun;57(2):123-31; quiz 248.
    PMID: 22624750 DOI: 10.1111/j.1834-7819.2012.01678.x
    Maxillary molar teeth may have accessory roots. The aim of this paper is to review and discuss the endodontic implications of this anatomical variation. A review of the literature was undertaken to identify studies and reported cases where accessory roots have been recorded in maxillary molar teeth. The results show that although the prevalence of accessory roots in maxillary molar teeth is low, they can exist in all three types of maxillary molar teeth, and they may be located palatally, buccally, mesially or distally. Hence, it is essential that dentists undertaking root canal treatment thoroughly assess all teeth to determine how many roots are present in order to provide the best possible outcome of treatment for the patient.
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology*
  9. Ahmad M
    Endod Dent Traumatol, 1991 Apr;7(2):55-8.
    PMID: 1782894
    The efficacy of two ultrasonic units in shaping curved canals in teeth were compared. Twenty teeth were instrumented using the Cavi-Endo unit at a power setting 1 using the technique recommended by the manufacturer. Another group of 20 teeth received similar treatment but were instrumented with the Enac unit. The time taken to instrument each canal was recorded. The pre- and post-instrumented radiographs of the teeth of x 10 magnification were taken using a microfocal technique. The radiographs were subjected to a subtraction technique to result in composite images of the pre- and post-instrumented shapes. The canal shape and the incidence of elbows were evaluated using various measurements taken from the radiographs. The manner the dentine was removed was similar in both groups. All canals exhibited unequal removal along the canal with more dentine being removed at the coronal end. The Enac group exhibited a higher incidence of elbows which occurred further apically than those in the Cavi-Endo group. There was no significant difference between groups in the following: time of instrumentation, amount of apical and coronal canal enlargement, apical deviation and change in width at the elbow. These findings were no different from those of another study using simulated canals.
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology
  10. Ahmed HMA, Versiani MA, De-Deus G, Dummer PMH
    Int Endod J, 2018 Oct;51(10):1182-1183.
    PMID: 30191599 DOI: 10.1111/iej.12928
    Matched MeSH terms: Dental Pulp Cavity/anatomy & histology*
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links