MyMedR

Displaying all 20 publications

Abstract:

Sort:

Fulltext A review of recent advances in the decontamination of mycotoxin and inactivation of fungi by ultrasound

Hashemi Moosavi M, Mousavi Khaneghah A, Javanmardi F, Hadidi M, Hadian Z, Jafarzadeh S, et al.

Ultrason Sonochem, 2021 Nov;79:105755.
PMID: 34562735 DOI: 10.1016/j.ultsonch.2021.105755

Innovative technologies for the pasteurization of food products have increased due to the global demand for higher-quality food products. In this regard, the current article aimed to provide an overview regarding the latest research on US application in the decontamination of fungi in food products and highlight the parameters influencing the effectiveness of this method. Therefore, the related article with inactivation of fungi and mycotoxins by ultrasound among last four years (2018-2021) by using terms such as 'mycotoxin,' 'inactivation,' 'ultrasound,' 'decontamination' among some international databases such as PubMed, Web of Science, Embase and Google Scholar" was retrieved. Ultrasound (US) is considered a non-thermal decontamination method for food products. In US, the release of energy due to the acoustic phenomenon destroys microorganisms. This technology is advantageous as it is inexpensive, eco-friendly, and does not negatively affect food products' food structure and organoleptic properties. The influence of the US on food structure and organoleptic properties dramatically depends on the intensity and energy density applied In addition, it can preserve higher levels of ascorbic acid, lycopene, and chlorophyll in sonicated food products. The treatment conditions, including frequency, intensity, duration, temperature, and processing pressure, influence the effectiveness of decontamination. However, US displays synergistic or antagonistic effects on bacteria, yeasts, molds, and mycotoxins when combined with other types of decontamination methods such as chemical and thermal approaches. Thus, further research is needed to clarify these effects. Overall, the application of US methods in the food industry for decreasing the microbial content of food products during processing has been applied. However, the use of US with other techniques needs to be studied further.

Matched MeSH terms: Decontamination*
Fulltext N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS)

Gopalan T, Muhamad MR, Wai Hoe VC, Hassandarvish P

PLoS One, 2024;19(2):e0296871.
PMID: 38319932 DOI: 10.1371/journal.pone.0296871

The Coronavirus Disease 2019 (COVID-19) pandemic has induced a critical supply of personal protective equipment (PPE) especially N95 respirators. Utilizing respirator decontamination procedures to reduce the pathogen load of a contaminated N95 respirator can be a viable solution for reuse purposes. In this study, the efficiency of a novel hybrid respirator decontamination method of ultraviolet germicidal irradiation (UVGI) which utilizes ultraviolet-C (UV-C) rays coupled with microwave-generated steam (MGS) against feline coronavirus (FCoV) was evaluated. The contaminated 3M 1860 respirator pieces were treated with three treatments (UVGI-only, MGS-only, and Hybrid-UVGI + MGS) with variable time. The virucidal activity was evaluated using the TCID50 method. The comparison of decontamination efficiency of the treatments indicated that the hybrid method achieved at least a pathogen log reduction of 4 logs, faster than MGS and UVGI. These data recommend that the proposed hybrid decontamination system is more effective comparatively in achieving pathogen log reduction of 4 logs.

Matched MeSH terms: Decontamination/methods
Fulltext Some numerical methods and comparisons for solving mathematical model of surface decontamination by disinfectant solution

Chai, Jin Sian, Hoe, Yeak Su, Ali H. M. Murid

MATEMATIKA, 2018;34(2):0-0.
MyJurnal

A mathematical model is considered to determine the effectiveness of disin-
fectant solution for surface decontamination. The decontamination process involved the
diffusion of bacteria into disinfectant solution and the reaction of the disinfectant killing
effect. The mathematical model is a reaction-diffusion type. Finite difference method and
method of lines with fourth-order Runge-Kutta method are utilized to solve the model
numerically. To obtain stable solutions, von Neumann stability analysis is employed to
evaluate the stability of finite difference method. For stiff problem, Dormand-Prince
method is applied as the estimated error of fourth-order Runge-Kutta method. MATLAB
programming is selected for the computation of numerical solutions. From the results
obtained, fourth-order Runge-Kutta method has a larger stability region and better ac-
curacy of solutions compared to finite difference method when solving the disinfectant
solution model. Moreover, a numerical simulation is carried out to investigate the effect
of different thickness of disinfectant solution on bacteria reduction. Results show that
thick disinfectant solution is able to reduce the dimensionless bacteria concentration more
effectively.

Matched MeSH terms: Decontamination
Fulltext Evaluation of injury to Saccharomyces rouxii YSa40 cells in low water activity/pH glycerol/CPB stress system

Yeoh, T.K., Cheah, Y.K., Davies, R.

International Food Research Journal, 2012;19(1):95-99.
MyJurnal

Mid-exponential phase Saccharomyces rouxii YSa40 cells subsequently stressed at low aw/pH in the 0.64 aw/pH 3.5 glycerol/CPB system became injured. Such injury was detected by the loss of ability of the
stressed population to form colonies on secondary-stress plating medium (glycerol/BM agar at 0.94 aw
/pH 3.5 (lactic acid)) while colony forming ability on secondary non-stress plating medium (sugars/BM agar at 0.94 aw/pH 3.5 (lactic) was unaffected. The injury was shown to be due to sensitivity to glycerol/lactic acid. Results of the present study will be useful for achieving complete decontamination of ‘Intermediate Moisture Foods’ against xerotolerant molds and yeast.

Matched MeSH terms: Decontamination
Fulltext Luminescent bacterial testing for monitoring hydrocarbon bioremediation – a review

Maryam, Z.

Journal of Biochemistry, Microbiology and Biotechnology, 2015;3(2):13-20.
MyJurnal

Human activities in a large array of industrial and agricultural sectors produce chemical contaminants which are chiefly hydrocarbons of various types that are potentially toxic and carcinogenic to aquatic and terrestrial organisms. Globally, millions of tons of these pollutants are generated annually, and in some areas, they are released indiscriminately to the environment. In order to overcome this problem, microbiological decontamination or bioremediation has been suggested. Bioremediation has been argued to be an efficient, economic, and adaptable alternative to physicochemical remediation. However, to date, such claims of successful bioremediation are often not supported by evidence from toxicity studies. In this regard, luminescent bacteria have been employed in some hydrocarbon remediation experiments to denote reduction in toxicity. In this review, the utilization of luminescence bacteria as toxicity monitoring agent for hydrocarbon remediation is discussed.

Matched MeSH terms: Decontamination
Fulltext Sepsis

Lim VKE

Med J Malaysia, 1996 Dec;51(4):494-8; quiz 499.
PMID: 10968044
Matched MeSH terms: Decontamination
A protein nanocomposite for ultra-fast, efficient and non-irritating skin decontamination of nerve agents

Wang J, Li Y, Huang J, Li W, Luo Y, Sui X, et al.

Nanoscale, 2020 Feb 21;12(7):4400-4409.
PMID: 32025678 DOI: 10.1039/c9nr09015k

In recent assassinations reported in London and Malaysia, nerve agents were used to cause death, by skin poisoning. Skin decontamination is the ultimate and most important defense against nerve agent poisoning, because no effective antidote currently exists. However, almost no existing material can achieve effective and rapid decontamination without irritating the skin. This study links proteins that exhibit no decontamination ability with polymers to form a nanocomposite. This creates a nanospace on the surface of the protein that attracts and traps organic molecules, effectively adsorbing the nerve agent Soman within several seconds, without irritating the skin. Analysis of the different components of proteins and polymers reveals that the decontamination efficiency is considerably affected by the thickness of the coated polymer. Moreover, the thickness of the layer is predominantly determined by the size and species of the core and the crosslinking method. Further in vivo experiments on rats poisoned with Soman verify the efficiency and safety of the nanocomposite. These results could be used to design and synthesize more multi-functional and effective decontamination materials.

Matched MeSH terms: Decontamination*
Availability of decontamination, elimination enhancement, and stabilization resources for the management of acute toxic exposures and poisonings in emergency departments in Malaysia

Awang R, Al-Sohaim SI, Zyoud SH, Khan HR, Hashim S

Intern Emerg Med, 2011 Oct;6(5):441-8.
PMID: 21750875 DOI: 10.1007/s11739-011-0662-z

Acute poisoning is a common medical emergency in Malaysia. Life can be saved if the patient is diagnosed properly and receives the appropriate treatment such as gastrointestinal decontamination techniques and resources to increase poison elimination according to clinical guidelines at a reasonable time. The aims of this study were to determine the availability of decontamination, elimination enhancement, and stabilization resources for the management of acute toxic exposures and poisonings in accident and emergency departments in Malaysia, and to compare the availability of such facilities among various types of hospitals. A comparative, descriptive cross-sectional study was conducted using a structured questionnaire. Seventy-four (58.3%) out of the targeted 127 hospitals replied and completed the questionnaire. The availabilities of most items related to stabilization resources were far better in general hospitals compared to district hospitals with specialists and district hospitals without specialists. These items were mechanical ventilators (p = 0.011), non-invasive positive pressure ventilators (0.024), pacemakers (p = 0.019), and transcutaneous cardiac pacing (p < 0.001). The availability of decontamination resources varied substantially with hospital type. Nevertheless, these differences did not reach statistical significance in any of the cases, whereas sodium sulphate, sorbitol, and polyethylene glycol were almost never available. The availabilities of most items related to elimination enhancement resources were far better in general hospitals and district hospitals with specialists compared to district hospitals without specialists. These items were haemodialysis (p = 0.046), haemoperfusion (p = 0.002), haemofiltration (p = 0.002), acid diuresis (p = 0.04), peritoneal dialysis (p < 0.001), and exchange transfusion (p < 0.001). Most Malaysian hospitals have certain important immediate interventions such as gastrointestinal decontamination techniques and resources to increase poison elimination. The availabilities of most facilities were far better in the general hospitals. Coordination between the National Poison Centre in Malaysia and hospitals should be established regarding the emergency facilities for effective management of poisoning cases in each hospital in order to direct the poisoned patients to the hospital where the appropriate management resources is available.

Matched MeSH terms: Decontamination
Clay-polymer nanocomposites: Progress and challenges for use in sustainable water treatment

Mukhopadhyay R, Bhaduri D, Sarkar B, Rusmin R, Hou D, Khanam R, et al.

J Hazard Mater, 2020 02 05;383:121125.
PMID: 31541959 DOI: 10.1016/j.jhazmat.2019.121125

Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of individual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.

Matched MeSH terms: Decontamination
Fulltext Sensory quality and flavour of alginate coated and repetitive pulsed light treated fresh-cut cantaloupes (Cucumis melo L. Var. Reticulatus Cv. Glamour) during storage

Koh PC, Noranizan MA, Karim R, Nur Hanani ZA

J Food Sci Technol, 2019 May;56(5):2563-2575.
PMID: 31168138 DOI: 10.1007/s13197-019-03739-0

Fresh-cut fruits are popular due to the convenience provided. However, fresh-cut processes damage fruit tissues and reduce the shelf life of products. Pulsed light (PL) treatment is a decontamination method of foods. PL treatment given repetitively at a certain interval during storage could further extend the shelf life of fresh-cut fruits. Edible coating preserves fresh-cut fruits by providing mechanical strength and reducing respiration and water loss. This study was to evaluate the effects of alginate coating combined with repetitive pulsed light (RPL) on sensory quality and flavour of fresh-cut cantaloupes during storage. Cantaloupes were treated with alginate (1.86%, w/v) and RPL (0.9 J/cm2 at every 48 h up to 26 days) alone or in combination. Flavour analysis of fresh-cut cantaloupes was carried out every 12 days during storage at 4 ± 1 °C while sensory analysis was performed on day 32. Alginate coating and/or RPL retained sugar contents (17.92-20.01 g/kg FW for fructose, 18.77-19.98 g/kg FW for glucose and 23.02-29.41 g/kg FW for sucrose) in fresh-cut cantaloupes during storage. Combination of alginate with RPL reduced accumulation of lactic acid although alginate coating was more effective to minimise changes of other organic acids in fresh-cut cantaloupes. The combined treatment was also more effective than individual treatment in retaining total aroma compound concentration of fresh-cut cantaloupes during storage with the highest relative concentration, i.e. 3.174 on day 36. Overall, the combined alginate coating and RPL was effective to maintain the fresh-like sensory quality of fresh-cut cantaloupes with insignificant overall acceptability compared to the control.

Matched MeSH terms: Decontamination
Gas in warfare

Macfarlane LRS

Journal of the Malaya Branch of the British Medical Association, 1941;5:25-30.

Matched MeSH terms: Decontamination
Fulltext SOLAR PHOTOCATALYTIC EFFICIENCY OF ZINC OXIDE FOR WATER DECONTAMINATION

FARAH EILYANA MOHAMED

UMT Journal of Undergraduate Research, 2019;1(1):92-102.
MyJurnal

Solar photocatalysis is a green technology that takes advantage of sustainable solar energy for enhancing oxidation process of numerous harmful water contaminants. In this study, a custom solar driven zinc oxide (ZnO)-mediated photocatalytic system was developed and its efficiency to remove organic contaminants as well as to disinfect selected bacteria was investigated. Methylene blue (MB) dye was used as the model organic contaminant, while Escherichia coli(E.coli) was used as the model fecal coliform bacteria in contaminated water. A series of photodegradation experiments were conducted on water contaminated with either 10 mg/L of MB or ~1010CFU/ml of E.coli. The experiments were completed under sunlight irradiation in the presence of 1 g/L of nano ZnO photocatalyst for up to 6 hours. Using a solar thermal collector, the photoreactor operated in the temperature range of 25 to 50 oC. The findings revealed that the combination of solar thermal with solar photocatalysis usingZnO intensified the degradation of MB and disinfection of E.coli. 98.08% of MB dye and 99.99% of E.coliwere successfully removed from the water within the first 3 hours of treatment. Almost complete removal was eventually achieved after 6 hours of treatment. It is therefore suggested that ZnO-based solar photocatalytic system developed in this study is highly efficient at enhancing water decontamination process.

Matched MeSH terms: Decontamination
Fulltext Effect of gamma-radiation on major aroma compounds and vanillin glucoside of cured vanilla beans (vanilla planifolia)

Salmah Moosa, Seri Chempaka Mohd. Yusof, Ruzalina Bahrin, Maizatul Akmam Md. Nasir

Jurnal Sains Nuklear Malaysia, 2014;26(1):18-24.
MyJurnal

Radiation processing of food materials by gamma-radiation is a well-established method for
microbial decontamination and insect disinfestation. Irradiation of spices at doses ranging from
10 to 30 kGy has been reported to result in complete elimination of microorganisms with
negligible changes in the flavour quality. The effect of gamma-radiation on microflora and
vanillin content of cured vanilla beans in the dose range of 5 - 50 kGy has been investigated, but
its effect on other major aroma compounds and vanillin glucoside (vanillin aroma precursor)
remaining after curing have not been studied so far. Vanillin (4-hydroxy-3-methoxybenzaldehyde)
is one such compound used as a flavouring agent and as a dietary component. It is the major
component of natural vanilla, which is one of the most widely used and important flavouring
materials throughout the world. Vanillin is an antioxidant capable of protecting membrane
against lipid peroxidation and DNA against strand breaks induced by reactive oxygen species.
The present work was aimed to study the effect of gamma-radiation processing on the major
aroma compounds of cured vanilla beans and also to investigate possible enhancement in vanillin
content by the radiolytic breakdown of vanillin glucoside present already. Cured vanilla beans
were irradiated (5, 10, 15, 20 and 30 kGy) and the vanillin content of control and irradiated
samples were analysed, respectively for possible enhancement of vanillin content by radiolysis of
vanillin glucoside. Radiolytic breakdown of glycosidic precursors of aroma constituents and
consequent release of free aroma was shown to result in the enhancement of aroma quality of
these products. Since a considerable amount of vanillin exists as its glycosidic precursor in cured
vanilla pods, a possible enhancement in yield of vanillin by radiation processing is thus expected.
Hence the highly stable oxygen–carbon linkage between vanillin and glucose limits the possible
enhancement of aroma quality of irradiated beans.

Matched MeSH terms: Decontamination
Adsorptive decontamination of diclofenac by three-dimensional graphene-based adsorbent: Response surface methodology, adsorption equilibrium, kinetic and thermodynamic studies

Hiew BYZ, Lee LY, Lai KC, Gan S, Thangalazhy-Gopakumar S, Pan GT, et al.

Environ Res, 2019 01;168:241-253.
PMID: 30321737 DOI: 10.1016/j.envres.2018.09.030

Pharmaceutical residues are emerging pollutants in the aquatic environment and their removal by conventional wastewater treatment methods has proven to be ineffective. This research aimed to develop a three-dimensional reduced graphene oxide aerogel (rGOA) for the removal of diclofenac in aqueous solution. The preparation of rGOA involved facile self-assembly of graphene oxide under a reductive environment of L-ascorbic acid. Characterisation of rGOA was performed by Fourier transform infrared, scanning electron microscope, transmission electron microscopy, nitrogen adsorption-desorption, Raman spectroscopy and X-ray diffraction. The developed rGOA had a measured density of 20.39 ± 5.28 mg/cm3, specific surface area of 132.19 m2/g, cumulative pore volume of 0.5388 cm3/g and point of zero charge of 6.3. A study on the simultaneous interactions of independent factors by response surface methodology suggested dosage and initial concentration as the dominant parameters influencing the adsorption of diclofenac. The highest diclofenac adsorption capacity (596.71 mg/g) was achieved at the optimum conditions of 0.25 g/L dosage, 325 mg/L initial concentration, 200 rpm shaking speed and 30 °C temperature. The adsorption equilibrium data were best fitted to the Freundlich model with correlation coefficient (R2) varying from 0.9500 to 0.9802. The adsorption kinetic data were best correlated to the pseudo-first-order model with R2 ranging from 0.8467 to 0.9621. Thermodynamic analysis showed that the process was spontaneous (∆G = - 7.19 to - 0.48 kJ/mol) and exothermic (∆H = - 12.82 to - 2.17 kJ/mol). This research concluded that rGOA is a very promising adsorbent for the remediation of water polluted by diclofenac.

Matched MeSH terms: Decontamination
Fulltext Tunable Synthesis of Mesoporous Carbons from Fe₃O(BDC)₃ for Chloramphenicol Antibiotic Remediation

Tran TV, Nguyen DTC, Le HTN, Bach LG, Vo DN, Hong SS, et al.

Nanomaterials (Basel), 2019 Feb 10;9(2).
PMID: 30744163 DOI: 10.3390/nano9020237

Chloramphenicol (CAP) is commonly employed in veterinary clinics, but illegal and uncontrollable consumption can result in its potential contamination in environmental soil, and aquatic matrix, and thereby, regenerating microbial resistance, and antibiotic-resistant genes. Adsorption by efficient, and recyclable adsorbents such as mesoporous carbons (MPCs) is commonly regarded as a "green and sustainable" approach. Herein, the MPCs were facilely synthesized via the pyrolysis of the metal⁻organic framework Fe₃O(BDC)₃ with calcination temperatures (x °C) between 600 and 900 °C under nitrogen atmosphere. The characterization results pointed out mesoporous carbon matrix (MPC700) coating zero-valent iron particles with high surface area (~225 m²/g). Also, significant investigations including fabrication condition, CAP concentration, effect of pH, dosage, and ionic strength on the absorptive removal of CAP were systematically studied. The optimal conditions consisted of pH = 6, concentration 10 mg/L and dose 0.5 g/L for the highest chloramphenicol removal efﬁciency at nearly 100% after 4 h. Furthermore, the nonlinear kinetic and isotherm adsorption studies revealed the monolayer adsorption behavior of CAP onto MPC700 and Fe₃O(BDC)₃ materials via chemisorption, while the thermodynamic studies implied that the adsorption of CAP was a spontaneous process. Finally, adsorption mechanism including H-bonding, electrostatic attraction, π⁻π interaction, and metal⁻bridging interaction was proposed to elucidate how chloramphenicol molecules were adsorbed on the surface of materials. With excellent maximum adsorption capacity (96.3 mg/g), high stability, and good recyclability (4 cycles), the MPC700 nanocomposite could be utilized as a promising alternative for decontamination of chloramphenicol antibiotic from wastewater.

Matched MeSH terms: Decontamination
Fulltext Survival predictors in paraquat intoxification and role of immunosuppression

Koh KH, Tan CH, Hii LW, Lee J, Ngu LL, Chai AJ, et al.

Toxicol Rep, 2014;1:490-495.
PMID: 28962262 DOI: 10.1016/j.toxrep.2014.06.010

Paraquat poisoning resulted in multiorgan failure and is associated with high mortality. We audited 83 historical cases of paraquat poisoning in past 2 years treated with conventional decontamination and supportive treatment, followed by enrolling 85 patients over a 2 year period into additional immunosuppression with intravenous (i.v.) methylprednisolone and i.v. cyclophosphamide. Our results showed that age, poor renal function and leucocytosis are the main predictors of fatal outcome. Immunosuppression regime rendered higher survival (6 out of 17 patients (35.3%)) versus historical control (1 out of 18 patients (5.6%)) (p = 0.041) in the cohort with admission eGFR < 50 ml/min/1.73 m(2) and WBC count > 11,000/μL. In contrast, there was no difference in survival with immunosuppression regime (38 out of 64 patients (59.4%)) compared to historical control (30 out of 52 patients (57.7%)) (p = 0.885) in those with eGFR > 50 ml/min/1.73 m(2) or WBC < 11,000/μL at presentation. Multivariable logistic regression showed survival probability = exp(logit)/(1 + exp(logit)), in which logit = 13.962 - (0.233 × ln(age (year))) - (1.344 × ln(creatinine (μmol/L))) - (1.602 × ln(rise in creatinine (μmol/day))) - (0.614 × ln(WBC (,000/μL))) + (2.021 × immunosuppression) and immunosuppression = 1 if given and 0 if not. Immunosuppression therapy yielded odds ratio of 0.132 (95% confidential interval: 0.029-0.603, p = 0.009). In conclusion, immunosuppression therapy with intravenous methylprednisolone and cyclophosphamide may counteract immune mediated inflammation after paraquat poisoning and improve survival of patients with admission eGFR < 50 ml/min/1.73 m(2) and WBC count > 11,000/μL.

Matched MeSH terms: Decontamination
Harnessing the photocatalytic potential of bismuth ferrite-activated carbon nanocomposite (BFO-AC) for Staphylococcus aureus decontamination under visible light

Daub NA, Aziz F, Mhamad SA, Chee DNA, Jaafar J, Yusof N, et al.

Environ Sci Pollut Res Int, 2024 Mar;31(11):16629-16641.
PMID: 38321283 DOI: 10.1007/s11356-024-32261-w

In response to the escalating global issue of microbial contamination, this study introduces a breakthrough photocatalyst: bismuth ferrite-activated carbon (BFO-AC) for visible light-driven disinfection, specifically targeting the Gram-positive bacterium Staphylococcus aureus (S. aureus). Employing an ultrasonication method, we synthesized various BFO-AC ratios and subjected them to comprehensive characterization. Remarkably, the bismuth ferrite-activated carbon 1:1.5 ratio (BA 1:1.5) nanocomposite exhibited the narrowest band gap of 1.86 eV. Notably, BA (1:1.5) demonstrated an exceptional BET surface area of 862.99 m2/g, a remarkable improvement compared to pristine BFO with only 27.61 m2/g. Further investigation through FE-SEM unveiled the presence of BFO nanoparticles on the activated carbon surface. Crucially, the photocatalytic efficacy of BA (1:1.5) towards S. aureus reached its zenith, achieving complete inactivation in just 60 min. TEM analysis revealed severe damage and rupture of bacterial cells, affirming the potent disinfection capabilities of BA (1:1.5). This exceptional disinfection efficiency underscores the promising potential of BA (1:1.5) for the treatment of contaminated water sources. Importantly, our results underscore the enhanced photocatalytic performance with an increased content of activated carbon, suggesting a promising avenue for more effective microorganism inactivation.

Matched MeSH terms: Decontamination
Fulltext Mobile Phones: A Possible Vehicle of Bacterial Transmission in a Higher Learning Institution in Malaysia

Hikmah N', Anuar TS

Malays J Med Sci, 2020 Mar;27(2):151-158.
PMID: 32788850 MyJurnal DOI: 10.21315/mjms2020.27.2.15

Background: Mobile phones (MPs) have become one of the most indispensable accessories in social and professional life. Though they offer plenty of benefits, MPs are prolific breeding grounds for infectious pathogens in communities. Thus, the aim of this study was to identify the prevalence of bacterial contamination and determine antimicrobial susceptibility pattern of Staphylococcus aureus (S. aureus) from MPs.
Methods: A cross-sectional study was conducted from March to July 2019 on 126 students and 37 laboratory staff/clinical instructors' MPs from the Faculty of Health Sciences, Universiti Teknologi MARA, Malaysia by a simple random sampling technique. Along with the questionnaire, a swab sample from each participant's MPs was collected and transported to the microbiology laboratory for bacterial culture as per standard microbiological procedures and antimicrobial susceptibility test by the disc diffusion technique. Data were analysed by the Statistical Package for Social Sciences Programme version 24.
Results: All of the tested MPs were contaminated with either single or mix bacterial agents. Bacillus spp. (74.8%), coagulase-negative staphylococci (CoNS; 47.9%) and S. aureus (20.9%) were the most predominant bacterial isolates, whilst the least isolate was Proteus vulgaris (P. vulgaris) (2.5%). Oxacillin resistance was seen in 5.9% of S. aureus isolate. A comparison of bacteria type and frequency among gender showed a significant difference with P. vulgaris (P = 0.003) and among profession showed a significant difference with S. aureus (P = 0.004).
Conclusion: The present study indicates that MPs can serve as a vector for both pathogenic and non-pathogenic organisms. Therefore, full guidelines about restricting the use of MPs in laboratory environments, hand hygiene and frequent decontamination of MPs are recommended to limit the risk of cross-contamination and healthcare-associated infections caused by MPs.

Matched MeSH terms: Decontamination
Fulltext Adsorption of DDT and PCB by Nanomaterials from Residual Soil

Taha MR, Mobasser S

PLoS One, 2015;10(12):e0144071.
PMID: 26659225 DOI: 10.1371/journal.pone.0144071

This paper presents the findings of a study on adsorption of dichlorodiphenythreechloroethen (DDT) and polychlorinated biphenyls (PCBs) on three nanomaterials including Multi walled Carbon Nanotube (MWNT), nano-clay and nano-alumina. DDT and PCBs are of significant concern due their high toxicity and long environmental half-lives. Experiments were conducted using batch adsorption procedures at different DDT and PCBs concentrations, from 10 to 60 mg/L. The amounts of MWNT, nano-clay and Nano-alumina used were 0.25%, 0.50%, 0.75%, 1%, 2% and 10%. The adsorption of PCBs solution onto the MWNT, nano-clay and nano-alumina was characterized by an initial rapid adsorption which eventually became constant within 22, 20, and 17 hours, respectively. The adsorption of DDT solution onto the MWNT, nano-clay and nano-alumina was also characterized by an initial rapid adsorption which gradually became constant within 22, 22 and 16 hours, respectively. Results of this study indicated that MWNT was a better adsorbent material compared to nano-clay and nano-alumina for both contaminants in this study. While at 10% of MWNT 88.9% and 77% of DDT and PCB were removed by MWNT, respectively. The effect of pH and temperature were also investigated.

Matched MeSH terms: Decontamination/methods
Hand decontamination practices and the appropriate use of gloves in two adult intensive care units in Malaysia

Katherason SG, Naing L, Jaalam K, Nik Mohamad NA, Bhojwani K, Harussani ND, et al.

J Infect Dev Ctries, 2010 Mar 08;4(2):118-23.
PMID: 20212345

BACKGROUND: Hand decontamination is a critical infection control practice in the prevention of nosocomial infection. This study was conducted to observe the hand hygiene practices of nurses and doctors in two intensive care units (ICUs) in Malaysia.
METHODOLOGY: Staff members were observed during patient contacts, and their hand washing techniques and hand hygiene practices were monitored. Five contact periods were observed for staff members while they cared for their assigned patients. Hand hygiene practices before and after patient contacts were categorized as clean uncontaminated, clean recontaminated, new gloves, and unchanged contaminated gloves. Compliance to hand-washing steps and time taken for hand washing were analyzed. Appropriate use of gloves based on CDC criteria also was assessed.
RESULTS: Compliance to hand hygiene practices was 70% before each patient contact. Staff members did not completely adhere to the hand-washing steps. The average time taken to wash hands was 20 seconds, and the necessary steps (rubbing palm over dorsum; rubbing fingers interlaced, and rotational rubbing of thumbs) were practiced minimally by all staff. Hand washing protocol was generally followed by all staff (100%). Alcohol hand rubs were available but were used moderately (60%); when used, staff members did not wait for the alcohol to dry. Only 4% of staff changed contaminated gloves between patients.
CONCLUSIONS: Hand hygiene compliance by ICU staff members needs to be improved. Improving adherence to correct hand hygiene techniques will require effective education programs and behavioral modification techniques. Moreover, hand hygiene guidelines must be incorporated into new staff orientation programs and the continuing education curriculum in the two hospitals studied.

Matched MeSH terms: Decontamination/statistics & numerical data*

Filters

Please provide feedback to Administrator ([email protected])

External Links