MyMedR

Copper vapour laser ID labelling on metal dentures and restorations

Ling BC, Nambiar P, Low KS, Lee CK

J Forensic Odontostomatol, 2003 Jun;21(1):17-22.

Denture marking is accepted as a means of identifying dentures and persons in geriatric institutions, or post-mortem during war, crimes, civil unrest, natural and mass disasters. Labelling on the acrylic resin component of the denture can easily be damaged or destroyed by fire but on cobalt-chromium components it would be more resistant. A copper vapour laser (CVL) can be used to label the cobalt-chromium components of dentures and metal restorations easily, and legibly, and miniaturised for the incorporation of more personal particulars necessary for the identification of the deceased person. The CVL beam is focussed by its optics and delivered to the material surface by the two-axis scanner mounted with mirrors. A personal computer controls the movement of the scanner and the firing of the CVL. The high peak power of the pulsed CVL is focussed to very high energy density producing plasma ablation of the alloy surface. Very fine markings of a few microns width can be produced enabling the storage of detailed information of the deceased person on a metal surface for the purpose of rapid identification.

Matched MeSH terms: Chromium Alloys/chemistry

Closed hollow bulb obturator--one-step fabrication: a clinical report

Buzayan MM, Ariffin YT, Yunus N

J Prosthodont, 2013 Oct;22(7):591-5.

PMID: 23551843 DOI: 10.1111/jopr.12036

A method is described for the fabrication of a closed hollow bulb obturator prosthesis using a hard thermoforming splint material and heat-cured acrylic resin. The technique allowed the thickness of the thermoformed bulb to be optimized for weight reduction, while the autopolymerized seal area was covered in heat-cured acrylic resin, thus eliminating potential leakage and discoloration. This technique permits the obturator prosthesis to be processed to completion from the wax trial denture without additional laboratory investing, flasking, and processing.

Matched MeSH terms: Chromium Alloys/chemistry

Zygomatic implant-retained fixed complete denture for an elderly patient

Baig MR, Rajan G, Yunus N

Gerodontology, 2012 Jun;29(2):e1140-5.

PMID: 21615782 DOI: 10.1111/j.1741-2358.2010.00433.x

Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics.

Matched MeSH terms: Chromium Alloys/chemistry

Association of human papillomavirus with denture wearing

Saini R, Osman NB, Ismail M, Sobri FM, Tang TH, Santhanam J

J Investig Clin Dent, 2011 Nov;2(4):241-7.

PMID: 25426895 DOI: 10.1111/j.2041-1626.2011.00068.x

To determine the prevalence of human papillomavirus in the oral cavity of denture wearers.

Matched MeSH terms: Chromium Alloys/chemistry

Evaluation of load at fracture of Procera AllCeram copings using different luting cements

Al-Makramani BMA, Razak AAA, Abu-Hassan MI

J Prosthodont, 2008 Feb;17(2):120-124.

PMID: 18047490 DOI: 10.1111/j.1532-849X.2007.00270.x

PURPOSE: The current study investigated the effect of different luting agents on the fracture resistance of Procera AllCeram copings.

METHODS: Six master dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Thirty copings (Procera AllCeram) of 0.6-mm thickness were manufactured. Three types of luting media were used: zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and dual-cured composite resin cement (Panavia F). Ten copings were cemented with each type. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.

RESULTS: ANOVA revealed significant differences in the load at fracture among the three groups (p < 0.001). The fracture strength results showed that the mean fracture strength of zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and resin luting cement (Panavia F) were 1091.9 N, 784.8 N, and 1953.5 N, respectively.

CONCLUSION: Different luting agents have an influence on the fracture resistance of Procera AllCeram copings.

Matched MeSH terms: Chromium Alloys/chemistry

Full-arch metal-resin cement- and screw-retained provisional restoration for immediately loaded implants

Baig MR, Rajan G

J Oral Implantol, 2010;36(3):219-23.

PMID: 20553176 DOI: 10.1563/AAID-JOI-D-09-00048

Abstract This article describes the clinical and laboratory procedures involved in the fabrication of laboratory-processed, provisional, screw-retained, implant-supported maxillary and mandibular fixed complete dentures incorporating a cast metal reinforcement for immediate loading of implants. Precise fit is achieved by intraoral luting of the cast frame to milled abutments. Effective splinting of all implants is attained by the metal substructure and retrievability is provided by the screw-retention of the prosthesis.

Matched MeSH terms: Chromium Alloys/chemistry

Displaying all 6 publications