Displaying publications 1 - 20 of 115 in total

Abstract:
Sort:
  1. Silvanir, Lai SY, Asmawi AA, Chew KW, Ngan CL
    Bioresour Technol, 2024 Feb;393:130094.
    PMID: 38000640 DOI: 10.1016/j.biortech.2023.130094
    Microalgae is a sustainable alternative source to traditional proteins. Existing pretreatment methods for protein extraction from microalgae still lack scalability, are uneconomical and inefficient. Herein, high shear mixing (HSM) was applied to disrupt the rigid cell walls and was found to assist in protein release from microalgae. This study integrates HSM in liquid biphasic system with seven parameters being investigated on extraction efficiency (EE) and protein yield (Y). The highest EE and Y obtained are 96.83 ± 0.47 % and 40.98 ± 1.27 %, respectively, using 30% w/v K3PO4 salt, 60 % v/v alcohol, volume ratio of 1:1 and 0.5 % w/v biomass loading under shearing rate of 16,000 rpm for 1 min.
    Matched MeSH terms: Cell Wall
  2. Tsuji Y, Vanholme R, Tobimatsu Y, Ishikawa Y, Foster CE, Kamimura N, et al.
    Plant Biotechnol J, 2015 Aug;13(6):821-32.
    PMID: 25580543 DOI: 10.1111/pbi.12316
    Bacteria-derived enzymes that can modify specific lignin substructures are potential targets to engineer plants for better biomass processability. The Gram-negative bacterium Sphingobium sp. SYK-6 possesses a Cα-dehydrogenase (LigD) enzyme that has been shown to oxidize the α-hydroxy functionalities in β-O-4-linked dimers into α-keto analogues that are more chemically labile. Here, we show that recombinant LigD can oxidize an even wider range of β-O-4-linked dimers and oligomers, including the genuine dilignols, guaiacylglycerol-β-coniferyl alcohol ether and syringylglycerol-β-sinapyl alcohol ether. We explored the possibility of using LigD for biosynthetically engineering lignin by expressing the codon-optimized ligD gene in Arabidopsis thaliana. The ligD cDNA, with or without a signal peptide for apoplast targeting, has been successfully expressed, and LigD activity could be detected in the extracts of the transgenic plants. UPLC-MS/MS-based metabolite profiling indicated that levels of oxidized guaiacyl (G) β-O-4-coupled dilignols and analogues were significantly elevated in the LigD transgenic plants regardless of the signal peptide attachment to LigD. In parallel, 2D NMR analysis revealed a 2.1- to 2.8-fold increased level of G-type α-keto-β-O-4 linkages in cellulolytic enzyme lignins isolated from the stem cell walls of the LigD transgenic plants, indicating that the transformation was capable of altering lignin structure in the desired manner.
    Matched MeSH terms: Cell Wall/enzymology; Cell Wall/metabolism
  3. Kan SP
    Int J Parasitol, 1979 Oct;9(5):475-80.
    PMID: 118943
    Matched MeSH terms: Cell Wall/ultrastructure
  4. Koh PC, Noranizan MA, Karim R, Nur Hanani ZA, Yusof NL
    J Food Sci Technol, 2020 Jun;57(6):2206-2221.
    PMID: 32431347 DOI: 10.1007/s13197-020-04257-0
    This study was to investigate the effects of optimised alginate coating combined with repetitive pulsed light (RPL) on cell wall composition of fresh-cut cantaloupes during chilled storage. Fresh-cut cantaloupes were coated with alginate (1.86%, w/v) followed by RPL treatment (0.9 J cm-2 at every 48 h up to 26 days) during storage of 36 days. Cell wall composition of fresh-cut cantaloupes was determined at every 12 days while microscopic analysis was conducted on day 2 and day 36. Alginate was effective in maintaining high pectin fractions of fresh-cut cantaloupes while RPL showed greater contribution in maintaining hemicellulose fraction. However, the combination of alginate and RPL was the most effective treatment to maintain the overall cell wall fractions that contributed to the cell wall integrity of fresh-cut cantaloupes during storage. The alginate + RPL samples also had the greatest cell turgidity and shape with well-defined cell walls at the end of storage.
    Matched MeSH terms: Cell Wall
  5. Azmi AAB, Sankaran R, Show PL, Ling TC, Tao Y, Munawaroh HSH, et al.
    Bioresour Technol, 2020 Apr;302:122874.
    PMID: 32007308 DOI: 10.1016/j.biortech.2020.122874
    Pretreatment of microalgal biomass possessing rigid cell wall is a critical step for enhancing the efficiency of microalgal biorefinery. However, the conventional pretreatment processes suffer the drawbacks of complex processing steps, long processing time, low conversion efficiency and high processing costs. This significantly hinders the industrial applicability of microalgal biorefinery. The innovative electricity-aid pretreatment techniques serve as a promising processing tool to extensively enhance the release of intracellular substances from microalgae. In this review, application of electric field-based techniques and recent advances of using electrical pretreatments on microalgae cell focusing on pulsed electric field, electrolysis, high voltage electrical discharges and moderate electric field are reviewed. In addition, the emerging techniques integrating electrolysis with liquid biphasic flotation process as promising downstream approach is discussed. This review delivers broad knowledge of the present significance of the application of these methods focusing on the development of electric assisted biomolecules extraction from microalgae.
    Matched MeSH terms: Cell Wall
  6. Ilias IA, Airianah OB, Baharum SN, Goh HH
    Data Brief, 2017 Dec;15:320-323.
    PMID: 29214193 DOI: 10.1016/j.dib.2017.09.050
    Expansin increases cell wall extensibility to allow cell wall loosening and cell expansion even in the absence of hydrolytic activity. Previous studies showed that excessive overexpression of expansin gene resulted in defective growth (Goh et al., 2014; Rochange et al., 2001) [1,2] and altered cell wall chemical composition (Zenoni et al., 2011) [3]. However, the molecular mechanism on how the overexpression of non-enzymatic cell wall protein expansin can result in widespread effects on plant cell wall and organ growth remains unclear. We acquired transcriptomic data on previously reported transgenic Arabidopsis line (Goh et al., 2014) [1] to investigate the effects of overexpressing a heterologus cucumber expansin gene (CsEXPA1) on the global gene expression pattern during early and late phases of etiolated hypocotyl growth.
    Matched MeSH terms: Cell Wall
  7. Ilias IA, Negishi K, Yasue K, Jomura N, Morohashi K, Baharum SN, et al.
    J Plant Res, 2019 Mar;132(2):159-172.
    PMID: 30341720 DOI: 10.1007/s10265-018-1067-0
    Expansin is a non-enzymatic protein which plays a pivotal role in cell wall loosening by inducing stress relaxation and extension in the plant cell wall. Previous studies on Arabidopsis, Petunia × hybrida, and tomato demonstrated that the suppression of expansin gene expression reduced plant growth but expansin overexpression does not necessarily promotes growth. In this study, both expansin gene suppression and overexpression in dark-grown transgenic Arabidopsis seedlings resulted in reduced hypocotyl length at late growth stages with a more pronounced effect for the overexpression. This defect in hypocotyl elongation raises questions about the molecular effect of expansin gene manipulation. RNA-seq analysis of the transcriptomic changes between day 3 and day 5 seedlings for both transgenic lines found numerous differentially expressed genes (DEGs) including transcription factors and hormone-related genes involved in different aspects of cell wall development. These DEGs imply that the observed hypocotyl growth retardation is a consequence of the concerted effect of regulatory factors and multiple cell-wall related genes, which are important for cell wall remodelling during rapid hypocotyl elongation. This is further supported by co-expression analysis through network-centric approach of differential network cluster analysis. This first transcriptome-wide study of expansin manipulation explains why the effect of expansin overexpression is greater than suppression and provides insights into the dynamic nature of molecular regulation during etiolation.
    Matched MeSH terms: Cell Wall/physiology*
  8. Lazan H, Ng SY, Goh LY, Ali ZM
    Plant Physiol Biochem, 2004 Dec;42(11):847-53.
    PMID: 15694277
    The potential significance of the previously reported papaya (Carica papaya L.) beta-galactosidase/galactanase (beta-d-galactoside galactohydrolase; EC 3.2.1.23) isoforms, beta-gal I, II and III, as softening enzymes during ripening was evaluated for hydrolysis of pectins while still structurally attached to unripe fruit cell wall, and hemicelluloses that were already solubilized in 4 M alkali. The enzymes were capable of differentially hydrolyzing the cell wall as evidenced by increased pectin solubility, pectin depolymerization, and degradation of the alkali-soluble hemicelluloses (ASH). This enzyme catalyzed in vitro changes to the cell walls reflecting in part the changes that occur in situ during ripening. beta-Galactosidase II was most effective in hydrolyzing pectin, followed by beta-gal III and I. The reverse appeared to be true with respect to the hemicelluloses. Hemicellulose, which was already released from any architectural constraints, seemed to be hydrolyzed more extensively than the pectins. The ability of the beta-galactanases to markedly hydrolyze pectin and hemicellulose suggests that galactans provide a structural cross-linkage between the cell wall components. Collectively, the results support the case for a functional relevance of the papaya enzymes in softening related changes during ripening.
    Matched MeSH terms: Cell Wall/enzymology*
  9. Islahudin F, Ting KN, Pleass RJ, Avery SV
    Antimicrob Agents Chemother, 2013 Nov;57(11):5787.
    PMID: 24123347 DOI: 10.1128/AAC.01688-13
    Matched MeSH terms: Cell Wall/drug effects*
  10. Kan SP, Dissanaike AS
    Z Parasitenkd, 1978 Oct 31;57(2):107-16.
    PMID: 104463
    The two species of Sarcocystis--S. levinei and S. fusiformis from the water buffalo, Bubalus bubalis, show some ultrastructural similarities in their cyst wall and zoites. The zoites of both species are of about the same size, banana-shaped and have 22 subpellicular microtubules, numerous micronemes, eight rhoptries, a micropore in the region of the micronemes, an elongated mitochondrion, and a nucleus. S. levinei has 200--300 micronemes and S. fusiformis has about 400. The sarcocysts of both species are trabeculated and their cyst walls have cytophaneres containing annulated fibrils and coarse, electron dense granules. The cytophaneres of S. levinei are sloping, with irregular, wavy outlines, whereas S. fusiformis has the cauliflower-type of cytophaneres. This difference in the appearance of the cytophaneres, together with the difference in size of the sarcocysts and their definitive hosts, further confirms that S. levinei and S. fusiformis are two distinct species in the water buffalo.
    Matched MeSH terms: Cell Wall/ultrastructure
  11. Nawawi WMFW, Lee KY, Kontturi E, Bismarck A, Mautner A
    Int J Biol Macromol, 2020 Apr 01;148:677-687.
    PMID: 31954796 DOI: 10.1016/j.ijbiomac.2020.01.141
    The structural component of fungal cell walls comprises of chitin covalently bonded to glucan; this constitutes a native composite material (chitin-glucan, CG) combining the strength of chitin and the toughness of glucan. It has a native nano-fibrous structure in contrast to nanocellulose, for which further nanofibrillation is required. Nanopapers can be manufactured from fungal chitin nanofibrils (FChNFs). FChNF nanopapers are potentially applicable in packaging films, composites, or membranes for water treatment due to their distinct surface properties inherited from the composition of chitin and glucan. Here, chitin-glucan nanofibrils were extracted from common mushroom (Agaricus bisporus) cell walls utilizing a mild isolation procedure to preserve the native quality of the chitin-glucan complex. These extracts were readily disintegrated into nanofibre dimensions by a low-energy mechanical blending, thus making the extract dispersion directly suitable for nanopaper preparation using a simple vacuum filtration process. Chitin-glucan nanopaper morphology, mechanical, chemical, and surface properties were studied and compared to chitin nanopapers of crustacean (Cancer pagurus) origin. It was found that fungal extract nanopapers had distinct physico-chemical surface properties, being more hydrophobic than crustacean chitin.
    Matched MeSH terms: Cell Wall/chemistry
  12. Lai WX, Gan HM, Hudson AO, Savka MA
    Genome Announc, 2016;4(1).
    PMID: 26847900 DOI: 10.1128/genomeA.01695-15
    The whole-genome sequence of a new genospecies of Methylobacterium sp., named GXS13 and isolated from grapevine xylem sap, is reported and demonstrates potential for methylotrophy, cytokinin synthesis, and cell wall modification. In addition, biosynthetic gene clusters were identified for cupriachelin, carotenoid, and acyl-homoserine lactone using the antiSMASH server.
    Matched MeSH terms: Cell Wall
  13. Woo SP, Yasin Z, Tan SH, Kajihara H, Fujita T
    Zookeys, 2015.
    PMID: 26798290 DOI: 10.3897/zookeys.545.6415
    Five sea cucumber species including one new species of the genus Stichopus are reported from the shallow coral reefs of Straits of Malacca. The new species Stichopus fusiformiossa has unusual fusiform spicules in the tentacles, which are not found in the other species of the genus. Pseudo-tables and large perforated plates are newly recorded for Stichopus hermanni Semper, 1868 and Stichopus vastus Sluiter, 1887, respectively.
    Matched MeSH terms: Cell Wall
  14. NUR SURIANNI AHAMAD SUFFIN, ANASYIDA ABU SEMAN, ZUHAILAWATI HUSSAIN
    Sains Malaysiana, 2013;42:1755-1761.
    Aluminum foams were fabricated by sintering dissolution process (SDP) using sodium chloride (NaCl) as space holder. The compositions of space holder, used in this study were 40 and 60 wt. % with different dissolution times; 1, 2 and 3 h. The effect of different dissolution times on compressive behavior and energy absorption of foams were evaluated. The result showed that by increasing space holder and dissolution times, energy absorption capability increases. For aluminum foam contains 60 wt. % NaCl, longer dissolution times resulted in thinner cell wall and cell structure become more unstable which lead to lower plateau region.
    Matched MeSH terms: Cell Wall
  15. Nayan N, van Erven G, Kabel MA, Sonnenberg AS, Hendriks WH, Cone JW
    J Sci Food Agric, 2019 Jun;99(8):4054-4062.
    PMID: 30737799 DOI: 10.1002/jsfa.9634
    BACKGROUND: White rot fungi have been used to improve the nutritive value of lignocellulose for ruminants. In feed analysis, the Van Soest method is widely used to determine the cell wall contents. To assess the reliability of this method (Method A) for determination of cell wall contents in fungal-treated wheat straw, we compared a combined monosaccharide analysis and pyrolysis coupled to gas chromatography with mass spectrometry (Py-GC/MS) (Method B). Ruminal digestibility, measured as in vitro gas production (IVGP), was subsequently used to examine which method explains best the effect of fungal pretreatment on the digestibility of wheat straw.

    RESULTS: Both methods differed considerably in the mass recoveries of the individual cell wall components, which changed on how we assess their degradation characteristics. For example, Method B gave a higher degradation of lignin (61.9%), as compared to Method A (33.2%). Method A, however, showed a better correlation of IVGP with the ratio of lignin to total structural carbohydrates, as compared to Method B (Pearson's r of -0.84 versus -0.69). Nevertheless, Method B provides a more accurate quantification of lignin, reflecting its actual modification and degradation. With the information on the lignin structural features, Method B presents a substantial advantage in understanding the underlying mechanisms of lignin breakdown. Both methods, however, could not accurately quantify the cellulose contents - among others, due to interference of fungal biomass.

    CONCLUSION: Method A only accounts for the recalcitrant residue and therefore is more suitable for evaluating ruminal digestibility. Method B allows a more accurate quantification of cell wall, required to understand and better explains the actual modification of the cell wall. The suitability of both methods, therefore, depends on their intended purposes. © 2019 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

    Matched MeSH terms: Cell Wall/metabolism; Cell Wall/microbiology; Cell Wall/chemistry*
  16. Lee HV, Hamid SB, Zain SK
    ScientificWorldJournal, 2014;2014:631013.
    PMID: 25247208 DOI: 10.1155/2014/631013
    Lignocellulosic biomass is a complex biopolymer that is primary composed of cellulose, hemicellulose, and lignin. The presence of cellulose in biomass is able to depolymerise into nanodimension biomaterial, with exceptional mechanical properties for biocomposites, pharmaceutical carriers, and electronic substrate's application. However, the entangled biomass ultrastructure consists of inherent properties, such as strong lignin layers, low cellulose accessibility to chemicals, and high cellulose crystallinity, which inhibit the digestibility of the biomass for cellulose extraction. This situation offers both challenges and promises for the biomass biorefinery development to utilize the cellulose from lignocellulosic biomass. Thus, multistep biorefinery processes are necessary to ensure the deconstruction of noncellulosic content in lignocellulosic biomass, while maintaining cellulose product for further hydrolysis into nanocellulose material. In this review, we discuss the molecular structure basis for biomass recalcitrance, reengineering process of lignocellulosic biomass into nanocellulose via chemical, and novel catalytic approaches. Furthermore, review on catalyst design to overcome key barriers regarding the natural resistance of biomass will be presented herein.
    Matched MeSH terms: Cell Wall/metabolism; Cell Wall/chemistry
  17. Le CF, Fang CM, Sekaran SD
    PMID: 28167546 DOI: 10.1128/AAC.02340-16
    Antimicrobial peptides (AMPs) are expressed in various living organisms as first-line host defenses against potential harmful encounters in their surroundings. AMPs are short polycationic peptides exhibiting various antimicrobial activities. The principal antibacterial activity is attributed to the membrane-lytic mechanism which directly interferes with the integrity of the bacterial cell membrane and cell wall. In addition, a number of AMPs form a transmembrane channel in the membrane by self-aggregation or polymerization, leading to cytoplasm leakage and cell death. However, an increasing body of evidence has demonstrated that AMPs are able to exert intracellular inhibitory activities as the primary or supportive mechanisms to achieve efficient killing. In this review, we focus on the major intracellular targeting activities reported in AMPs, which include nucleic acids and protein biosynthesis and protein-folding, protease, cell division, cell wall biosynthesis, and lipopolysaccharide inhibition. These multifunctional AMPs could serve as the potential lead peptides for the future development of novel antibacterial agents with improved therapeutic profiles.
    Matched MeSH terms: Cell Wall/drug effects; Cell Wall/metabolism
  18. Tan MS, Rahman S, Dykes GA
    Appl Environ Microbiol, 2016 01 15;82(2):680-8.
    PMID: 26567310 DOI: 10.1128/AEM.02609-15
    Minimally processed fresh produce has been implicated as a major source of foodborne microbial pathogens globally. These pathogens must attach to the produce in order to be transmitted. Cut surfaces of produce that expose cell walls are particularly vulnerable. Little is known about the roles that different structural components (cellulose, pectin, and xyloglucan) of plant cell walls play in the attachment of foodborne bacterial pathogens. Using bacterial cellulose-derived plant cell wall models, we showed that the presence of pectin alone or xyloglucan alone affected the attachment of three Salmonella enterica strains (Salmonella enterica subsp. enterica serovar Enteritidis ATCC 13076, Salmonella enterica subsp. enterica serovar Typhimurium ATCC 14028, and Salmonella enterica subsp. indica M4) and Listeria monocytogenes ATCC 7644. In addition, we showed that this effect was modulated in the presence of both polysaccharides. Assays using pairwise combinations of S. Typhimurium ATCC 14028 and L. monocytogenes ATCC 7644 showed that bacterial attachment to all plant cell wall models was dependent on the characteristics of the individual bacterial strains and was not directly proportional to the initial concentration of the bacterial inoculum. This work showed that bacterial attachment was not determined directly by the plant cell wall model or bacterial physicochemical properties. We suggest that attachment of the Salmonella strains may be influenced by the effects of these polysaccharides on physical and structural properties of the plant cell wall model. Our findings improve the understanding of how Salmonella enterica and Listeria monocytogenes attach to plant cell walls, which may facilitate the development of better ways to prevent the attachment of these pathogens to such surfaces.
    Matched MeSH terms: Cell Wall/microbiology*; Cell Wall/chemistry
  19. Lee PY, Gam LH, Yong VC, Rosli R, Ng KP, Chong PP
    J Appl Microbiol, 2014 Sep;117(3):854-65.
    PMID: 24909754 DOI: 10.1111/jam.12562
    This study was conducted to identify antigenic proteins of Candida tropicalis that are targeted by the host immune system.
    Matched MeSH terms: Cell Wall/immunology*; Cell Wall/chemistry
  20. Latha LY, Darah I, Kassim MJ, Sasidharan S
    Ultrastruct Pathol, 2010 Aug;34(4):219-25.
    PMID: 20594042 DOI: 10.3109/01913121003651513
    The antibacterial activity of Vernonia cinerea (L.) extract was investigated using the broth dilution method. The extract showed a favorable antimicrobial activity against Pseudomonas aeruginosa with a minimum inhibition concentration (MIC) value of 3.13 mg/mL. V. cinerea extract at (1/2), 1, or 2 times the MIC significantly inhibited bacterial growth with a noticeable drop in optical density (OD) of the bacterial culture, thus confirming the antibacterial activity of the extract on P. aeruginosa. Imaging using scanning (SEM) and transmission (TEM) electron microscopy was done to determine the major alterations in the microstructure of the extract-treated P. aeruginosa. The main abnormalities noted via SEM and TEM studies were the alteration in morphology of the bacterial cells. The main reason for this destruction was the severe alterations of the cell wall with the formation of holes, invaginations, and morphological disorganization caused by the extract. The authors conclude that the extract may be used as a candidate for the development of antimicrobial agents.
    Matched MeSH terms: Cell Wall/drug effects; Cell Wall/ultrastructure
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links