A comparative study of five periodic human strains of Brugia malayi, originating from India, China, Korea, Malaysia and Indonesia, is given. This morphological analysis is based on males; the "standard" characters (oesophagus, papillae, spicules...) appear identical. On the contrary, the cuticular ornamentation of the posterior region--which is composed of the area rugosa and of a system of bosses and constitutes a secondary non-skid copulatory apparatus--differs following the geographical origin of the strain. A key is given, based on this character. 1(2) At 800-1,200 micron from the tip of tail, numerous cuticular bosses present on the right side of the body (fig. 2 and 8 B). 2(1) At 800-1,200 micron from the tip of tail, cuticular bosses absent or scarce on the right side of the body (fig. 8 D). 3(4) At 1,800-1,200 micron from the tip of tail (fig. 4), scarce and slightly projecting cuticular bosses on the dorsal side of the body contrasting with well projecting lateral cuticular bosses (fig. 9 E and F). Anterior extremity of the area rugosa made by a few stripes of tiny bosses linked transversally (fig. 9 A). 4(3) At 1,800-2,200 micron, numerous cuticular bosses on the dorsal side of the body (figs. 5, 6 and 7). Anterior extremity of the area rugosa made by the stripes of longitudinal rods (fig. 9C). 5(6) Oblong transversally stretched cuticular bosses on the dorsal and left sides of the body, anteriorly to the area rugosa (fig. 5); big oblong bosses on the left side (fig. 9 B). Transversal wrinkles and stripes of rods absent on the dorsal side of the body. 6(5) Round cuticular bosses on the dorsal and left sides of the body anteriorly to the area rugosa (figs. 6 and 7): no big oblong bosses on the left side. Transversal wrinkles or stripes of rods present on the dorsal side of the body (fig. 9 D). Nomenclaturally, such differences could be used in defining different taxa, but it could be useful to perform "blind determination" (material without labelling), to study conveniently the morphology of microfilariae (often an excellent indication for speciation in that group of Nematodes) and, evenly, to proceed to parallel studies on isoenzymes. However, whatever could be the taxonomical conclusion, the differences observed in Brugia malayi originating from different regions appear to the sufficient to consider the existence of four distinct diseases.
Nickel-rich (Ni > 90 %) cathodes are regarded as one of the most attractive because of their high energy density, despite their poor stability and cycle life. To improve their performance, in this study we synthesized a double concentration-gradient layered Li[Ni0.90Co0.04Mn0.03Al0.03]O2 oxide (CG-NCMA) using a continuous co-precipitation Taylor-Couette cylindrical reactor (TCCR) with a Ni-rich-core, an Mn-rich surface, and Al on top. The concentration-gradient morphology was confirmed through cross-sectional EDX line scanning. The as-synthesized sample exhibited excellent electrochemical performance at high rates (5C/10C), as well as cyclability (91.5 % after 100 cycles and 70.3 % after 500 cycles at 1C), superior to that (83.4 % and 47.6 %) of its non-concentration-gradient counterpart (UC-NCMA). The Mn-rich surface and presence of Al helped the material stay structurally robust, even after 500 cycles, while also suppressing side reactions between the electrode and electrolyte, resulting in better overall electrochemical performance. These enhancements in performance were studied using TEM, SEM, in-situ-XRD, XPS, CV, EIS and post-mortem analyses. This synthetic method enables the highly scalable production of CG-NCMA samples with two concentration-gradient structures for practical applications in Li-ion batteries.
The growing use of EVs and society's energy needs require safe, affordable, durable, and eco-friendly high-energy lithium-ion batteries (LIBs). To this end, we synthesized and investigated the removal of Co from Al-doped Ni-rich cathode materials, specifically LiNi0.9Co0.1Al0.0O2 (NCA-0), LiNi0.9Mn0.1Al0.0O2 (NMA-0), LiNi0.9Mn0.07Al0.03O2 (NMA-3), intending to enhance LIB performance and reduce the reliance on cobalt, a costly and scarce resource. Our study primarily focuses on how the removal of Co affects the material characteristics of Ni-rich cathode material and further introduces aluminum into the cathode composition to study its impacts on electrochemical properties and overall performance. Among the synthesized samples, we discovered that the NMA-3 sample, modified with 3 mol% of Al, exhibited superior battery performance, demonstrating the effectiveness of aluminum in promoting cathode stability. Furthermore, the Al-modified cathode showed promising cycle life under normal and high-temperature conditions. Our NMA-3 demonstrated remarkable capacity retention of ∼ 88 % at 25 °C and ∼ 81 % at 45 °C after 200 cycles at 1C, within a voltage range of 2.8-4.3 V, closely matching the performances of conventional NCM and NCA cathodes. Without cobalt, the cathodes exhibited increased cation disorder leading to inferior rate capabilities at high C-rates. In-situ transmission XRD analysis revealed that the introduction of Al has reduced the phase change and provided much-needed stability to the overall structure of the Co-free NMA-3. Altogether, the findings suggest that our aluminum-modified NMA-3 sample offers a promising approach to developing Co-free, Ni-rich cathodes, effectively paving the way toward sustainable, high-energy-density LIBs.
Rechargeable lithium-oxygen (Li-O2) batteries are being considered as the next-generation energy storage systems due to their higher theoretical energy density. However, the practical application of Li-O2 batteries is hindered by slow kinetics and the formation of side products during the oxygen reduction and evolution reactions on the cathode. These reactions lead to high overpotentials during charging and discharging. To address these challenges, we propose a simple ultrasonic method for synthesizing cobalt nanoclusters embedded in nitrogen-doped graphene nanosheets (GrZnCo) derived from metal-organic frameworks (MOFs). The resulting material, due to the retention of metallic cobalt structure, exhibits better electronic conductivity. Additionally, the GrZnCo catalyst shows vigorous catalytic activity, which can improve reaction kinetics and suppress side reactions, thus lowering the charging overpotential. We have investigated the impact of different catalyst compositions (GrZnCox; x = 1, 3, 5) by varying the amounts of cobalt and zinc. The optimum catalyst, GrZnCo3, contains high cobalt-N active components, graphitic-N, pyridinic-N, pyrrolic-N, and abundant defect structures, which enhance the electrochemical performance. The defect-rich GrZnCo3 catalyst enables Li-O2 batteries to achieve a high discharge capacity of 13500 mAh·g-1 at 50 mA·g-1 and a remarkable long-term cycling performance of over 400 cycles at 100 mA·g-1 with a limited capacity of 500 mAh·g-1. This work demonstrates an effective approach to fabricate cost-effective electrocatalysts for various energy storage systems.
Although solid-state Li-metal batteries (LMBs) featuring polymer-based solid electrolytes might one day replace conventional Li-ion batteries, the poor Li-ion conductivity of solid polymer electrolytes at low temperatures has hindered their practical applications. Herein, we describe the first example of using a co-precipitation method in a Taylor flow reactor to produce the metal hydroxides of both the Ga/F dual-doped Li7La3Zr2O12 (Ga/F-LLZO) ceramic electrolyte precursors and the Li2MoO4-modified Ni0.8Co0.1Mn0.1O2 (LMO@T-LNCM 811) cathode materials for LMBs. The Li/Nafion (LiNf)-coated Ga/F-LLZO (LiNf@Ga/F-LLZO) ceramic filler was finely dispersed in the poly(vinylidene fluoride)/polyacrylonitrile/lithium bis(trifluoromethanesulfonimide)/succinonitrile matrix to give a trilayer composite polymer electrolyte (denoted "Tri-CPE") through a simple solution-casting. The bulk ionic conductivity of the Tri-CPE at room temperature was approximately 4.50 × 10-4 S cm-1 and exhibited a high Li+ ion transference number (0.84). It also exhibits a broader electrochemical window of 1-5.04 V versus Li/Li+. A full cell based on a CR2032 coin cell containing the LMO@T-LNCM811-based composite cathode, when cycled under 1 C/1 C at room temperature for 300 cycles, achieved an average Columbic efficiency of 99.4% and a capacity retention of 89.8%. This novel fabrication strategy for Tri-CPE structures has potential applications in the preparation of highly safe high-voltage cathodes for solid-state LMBs.
A novel scalable Taylor-Couette reactor (TCR) synthesis method was employed to prepare Ta-modified LiNi0.92Co0.04Mn0.04O2 (T-NCM92) with different Ta contents. Through experiments and density functional theory (DFT) calculations, the phase and microstructure of Ta-modified NCM92 were analyzed, showing that Ta provides a bifunctional (doping and coating at one time) effect on LiNi0.92Co0.04Mn0.04O2 cathode material through a one-step synthesis process via a controlling suitable amount of Ta and Li-salt. Ta doping allows the tailoring of the microstructure, orientation, and morphology of the primary NCM92 particles, resulting in a needle-like shape with fine structures that considerably enhance Li+ ion diffusion and electrochemical charge/discharge stability. The Ta-based surface-coating layer effectively prevented microcrack formation and inhibited electrolyte decomposition and surface-side reactions during cycling, thereby significantly improving the electrochemical performance and long-term cycling stability of NCM92 cathodes. Our as-prepared NCM92 modified with 0.2 mol% Ta (i.e., T2-NCM92) exhibits outstanding cyclability, retaining 84.5 % capacity at 4.3 V, 78.3 % at 4.5 V, and 67.6 % at 45 ℃ after 200 cycles at 1C. Even under high-rate conditions (10C), T2-NCM92 demonstrated a remarkable capacity retention of 66.9 % after 100 cycles, with an initial discharge capacity of 157.6 mAh g-1. Thus, the Ta modification of Ni-rich NCM92 materials is a promising option for optimizing NCM cathode materials and enabling their use in real-world electric vehicle (EV) applications.
Despite their fundamental importance the links between forest productivity, diversity and climate remain contentious. We consider whether variation in productivity across climates reflects adjustment among tree species and individuals, or changes in tree community structure. We analysed data from 60 plots of humid old-growth forests spanning mean annual temperatures (MAT) from 2.0 to 26.6 °C. Comparing forests at equivalent aboveground biomass (160 Mg C ha-1), tropical forests ≥24 °C MAT averaged more than double the aboveground woody productivity of forests <12 °C (3.7 ± 0.3 versus 1.6 ± 0.1 Mg C ha-1 yr-1). Nonetheless, species with similar standing biomass and maximum stature had similar productivity across plots regardless of temperature. We find that differences in the relative contribution of smaller- and larger-biomass species explained 86% of the observed productivity differences. Species-rich tropical forests are more productive than other forests due to the high relative productivity of many short-stature, small-biomass species.
One mechanism proposed to explain high species diversity in tropical systems is strong negative conspecific density dependence (CDD), which reduces recruitment of juveniles in proximity to conspecific adult plants. Although evidence shows that plant-specific soil pathogens can drive negative CDD, trees also form key mutualisms with mycorrhizal fungi, which may counteract these effects. Across 43 large-scale forest plots worldwide, we tested whether ectomycorrhizal tree species exhibit weaker negative CDD than arbuscular mycorrhizal tree species. We further tested for conmycorrhizal density dependence (CMDD) to test for benefit from shared mutualists. We found that the strength of CDD varies systematically with mycorrhizal type, with ectomycorrhizal tree species exhibiting higher sapling densities with increasing adult densities than arbuscular mycorrhizal tree species. Moreover, we found evidence of positive CMDD for tree species of both mycorrhizal types. Collectively, these findings indicate that mycorrhizal interactions likely play a foundational role in global forest diversity patterns and structure.