Ninety normal individuals were included in this study on skin types, skin colours and cutaneous responses to ultraviolet radiation. Skin types were recorded using Fitzpatrick's classification, skin colours were measured using the Minolta Chromameter CR-300, and cutaneous responses to UV radiation were measured in terms of minimal erythema dose (MED) to UVA, UVB and the immediate pigment darkening dose to UVA (IPDDA). Skin colour measurements were taken from the right cheek to represent facultative skin colours, and from the buttock to represent constitutive skin colours. The colours measured were expressed by the L x a x b colour space. Skin types and some colour parameters (L and b from covered parts of body) correlated fairly well with the minimal erythema doses (MED) to UVA and UVB. Skin colour measurements are more objective than skin type assessment and could be better markers of photosensitivity. However, there is still considerable overlap in MEDs for persons with different skin colours, and further studies of these parameters are warranted. Our MEDs are higher than other reports on similar skin types and skin colours. This could be due to differences in methodology, genetic make-up or acclimatization from chronic sun exposure. This illustrates the importance of local controls for each institution dealing with photosensitive disorders.
The high variations of background luminance, low contrast and excessively enhanced contrast of hand bone radiograph often impede the bone age assessment rating system in evaluating the degree of epiphyseal plates and ossification centers development. The Global Histogram equalization (GHE) has been the most frequently adopted image contrast enhancement technique but the performance is not satisfying. A brightness and detail preserving histogram equalization method with good contrast enhancement effect has been a goal of much recent research in histogram equalization. Nevertheless, producing a well-balanced histogram equalized radiograph in terms of its brightness preservation, detail preservation and contrast enhancement is deemed to be a daunting task.
The success of printing technology in the electronics industry primarily depends on the availability of metal printing ink. Various types of commercially available metal ink are widely used in different industries such as the solar cell, radio frequency identification (RFID) and light emitting diode (LED) industries, with limited usage in semiconductor packaging. The use of printed ink in semiconductor IC packaging is limited by several factors such as poor electrical performance and mechanical strength. Poor adhesion of the printed metal track to the epoxy molding compound is another critical factor that has caused a decline in interest in the application of printing technology to the semiconductor industry. In this study, two different groups of adhesion promoters, based on metal and polymer groups, were used to promote adhesion between the printed ink and the epoxy molding substrate. The experimental data show that silver ink with a metal oxide adhesion promoter adheres better than silver ink with a polymer adhesion promoter. This result can be explained by the hydroxyl bonding between the metal oxide promoter and the silane grouping agent on the epoxy substrate, which contributes a greater adhesion strength compared to the polymer adhesion promoter. Hypotheses of the physical and chemical functions of both adhesion promoters are described in detail.
Segmentation is the most crucial part in the computer-aided bone age assessment. A well-known type of segmentation performed in the system is adaptive segmentation. While providing better result than global thresholding method, the adaptive segmentation produces a lot of unwanted noise that could affect the latter process of epiphysis extraction.
Current two-dimensional (2D) ultrasonic marker measurements are inherent with intra- and inter-observer variability limitations. The objective of this paper is to investigate the performance of conventional 2D ultrasonic marker measurements and proposed programmable interactive three-dimensional (3D) marker evaluation. This is essentially important to analyze that the measurement on 3D volumetric measurement possesses higher impact and reproducibility vis-à-vis 2D measurement. Twenty three cases of prenatal ultrasound examination were obtained from collaborating hospital after Ethical Committee's approval. The measured 2D ultrasonic marker is Nuchal Translucency or commonly abbreviated as NT. Descriptive analysis of both 2D and 3D ultrasound measurement were calculated. Three trial measurements were taken for each method. Both data were tested with One-Sample Kolmogorov-Smirnov Test and results indicate that markers measurements were distributed normally with significant parametric values at 0.621 and 0.596 respectively. Computed mean and standard deviation for both measurement methods are 1.4495 ± 0.46490 (2D) and 1.3561 ± 0.50994 (3D). ANOVA test shows that computerized 3D measurements were found to be insignificantly different from the mean of conventional 2D at the significance level of 0.05. With Pearson's correlation coefficient value or R = 0.861, the result proves strong positive linear correlation between 2D and 3D ultrasonic measurements. Reproducibility and accuracy of 3D ultrasound in NT measurement was significantly increased compared with 2D B-mode ultrasound prenatal assessment. 3D reconstructed imaging has higher clinical values compare to 2D ultrasound images with less diagnostics information.
Two insular settlements (Kampung Pulau Ketam and Kampung Sungai Lima) were selected to study the population dynamics of Aedes aegypti and Aedes albopictus mosquitoes, vectors of dengue and chikungunya infections. Ovitrap surveillance was conducted between October 2007 and October 2008. There was an inverse negative association between ovitrap index and rainfall at the time of collection, probably because rainfall increased the number of available oviposition sites. Rainfall and ovitrap index were positively associates the 25th day after rainfall occurred. A minor, second peak was observed from the 38th to the 42nd day. The first peak was consistent with the minimum 18-day period between the hatching of eggs to the first oviposition. The second minor peak could be due to the second gonotrophic cycle of the female mosquitoes. Rainfall is an important environmental factor associated with Aedes breeding at the study sites.