MyMedR

Displaying all 6 publications

Abstract:

Sort:

Sonogram of coccygeus muscle in dairy cows with different gestational ages

Ulum MF, Frastantie D, Purwantara B

J Anim Sci Technol, 2017;59:26.
PMID: 29270304 DOI: 10.1186/s40781-017-0152-6

Background: The change in size and weight of the female reproductive organs during gestation and birth might be affect the perineal muscles and this condition in dairy cow not been reported. This study aimed to assess the ultrasonographic image of coccygeus muscle in 11 inseminated dairy cows with different gestational ages and postpartum.
Methods: Gestational age was calculated based on the record of artificial insemination and confirmed by using transrectal brightness mode ultrasonography. Perineal hair between the sacrum and ischium bones was shaved along 3-5 cm before being ultrasound. The images of perineal area were obtained by transcutaneous ultrasound using a 5.0 MHz transducer. The thickness and intensity of the coccygeus muscle were measured and analyzed by gestational status and postpartum to show the differences.
Results: The results showed that the thickness of coccygeus muscle increased with the increase in gestational age. Muscle intensity only increased at young gestational age. However, it decreased with the increase in gestational age (P
EDTA-treated cotton-thread microfluidic device used for one-step whole blood plasma separation and assay

Ulum MF, Maylina L, Noviana D, Wicaksono DH

Lab Chip, 2016 Apr 12;16(8):1492-504.
PMID: 27021631 DOI: 10.1039/c6lc00175k

This study aims to observe the wicking and separation characteristics of blood plasma in a cotton thread matrix functioning as a microfluidic thread-based analytical device (μTAD). We investigated several cotton thread treatment methods using ethylenediaminetetraacetic acid (EDTA) anticoagulant solution for wicking whole blood samples and separating its plasma. The blood of healthy Indonesian thin tailed sheep was used in this study to understand the properties of horizontal wicking and separation on the EDTA-treated μTAD. The wicking distance and blood cell separation from its plasma was observed for 120 s and documented using a digital phone camera. The results show that untreated cotton-threads stopped the blood wicking process on the μTAD. On the other hand, the deposition of EDTA anticoagulant followed by its drying on the thread at room temperature for 10 s provides the longest blood wicking with gradual blood plasma separation. Furthermore, the best results in terms of the longest wicking and the clearest on-thread separation boundary between blood cells and its plasma were obtained using the μTAD treated with EDTA deposition followed by 60 min drying at refrigerated temperature (2-8 °C). The separation length of blood plasma in the μTADs treated with dried-EDTA at both room and refrigerated temperatures was not statistically different (P > 0.05). This separation occurs through the synergy of three factors, cotton fiber, EDTA anticoagulant and blood platelets, which induce the formation of a fibrin-filter via a partial coagulation process in the EDTA-treated μTAD. An albumin assay was employed to demonstrate the efficiency of this plasma separation method during a one-step assay on the μTAD. Albumin in blood is an important biomarker for kidney and heart disease. The μTAD has a slightly better limit of detection (LOD) than conventional blood analysis, with an LOD of 114 mg L(-1) compared to 133 mg L(-1), respectively. However, the μTAD performed faster to get results after 3 min compared to 14 min for centrifuged analysis of sheep blood samples. In conclusion, on-thread dried-EDTA anticoagulant deposition was able to increase the wicking distance and has a better capability to separate blood plasma and is suitable for combining separation and the assay system in a single device.
In vitro and in vivo degradation evaluation of novel iron-bioceramic composites for bone implant applications

Ulum MF, Arafat A, Noviana D, Yusop AH, Nasution AK, Abdul Kadir MR, et al.

Mater Sci Eng C Mater Biol Appl, 2014 Mar 1;36:336-44.
PMID: 24433920 DOI: 10.1016/j.msec.2013.12.022

Biodegradable metals such as magnesium, iron and their alloys have been known as potential materials for temporary medical implants. However, most of the studies on biodegradable metals have been focusing on optimizing their mechanical properties and degradation behavior with no emphasis on improving their bioactivity behavior. We therefore investigated the possibility of improving iron biodegradation rate and bioactivity by incorporating various bioactive bioceramics. The iron-based bioceramic (hydroxyapatite, tricalcium phosphate and biphasic calcium phosphate) composites were prepared by mechanical mixing and sintering process. Degradation studies indicated that the addition of bioceramics lowered the corrosion potential of the composites and slightly increased their corrosion rate compared to that of pure iron. In vitro cytotoxicity results showed an increase of cellular activity when rat smooth muscle cells interacted with the degrading composites compared to pure iron. X-ray radiogram analysis showed a consistent degradation progress with that found in vivo and positive tissue response up to 70 days implantation in sheep animal model. Therefore, the iron-based bioceramic composites have the potential to be used for biodegradable bone implant applications.
Insight into the bioabsorption of Fe-based materials and their current developments in bone applications

Md Yusop AH, Ulum MF, Al Sakkaf A, Hartanto D, Nur H

Biotechnol J, 2021 Dec;16(12):e2100255.
PMID: 34520117 DOI: 10.1002/biot.202100255

Iron (Fe) and Fe-based materials have been vigorously explored in orthopedic applications in the past decade mainly owing to their promising mechanical properties including high yield strength, elastic modulus and ductility. Nevertheless, their corrosion products and low corrosion kinetics are the major concerns that need to be improved further despite their appealing mechanical strengths. The current studies on porous Fe-based scaffolds show an improved corrosion rate but the in vitro biocompatibility is still problematic in general. Unlike the Mg implants, the biodegradation and bioabsorption of Fe-based implants are still not well described. This vague issue could implicate the development of Fe-based materials as potential medical implants as they have not reached the clinical trial stage yet. Thus, there is a need to understand in-depth the Fe corrosion behavior and its bioabsorption mechanism to facilitate the material design of Fe-based scaffolds and further improve its biocompatibility. This manuscript provides an important insight into the basic bioabsorption of the multi-ranged Fe-based corrosion products with a review of the latest progress on the corrosion & in vitro biocompatibility of porous Fe-based scaffolds together with the remaining challenges and the perspective on the future direction.
Evidences of in vivo bioactivity of Fe-bioceramic composites for temporary bone implants

Ulum MF, Nasution AK, Yusop AH, Arafat A, Kadir MR, Juniantito V, et al.

J Biomed Mater Res B Appl Biomater, 2015 Oct;103(7):1354-65.
PMID: 25385691 DOI: 10.1002/jbm.b.33315

Iron-bioceramic composites have been developed as biodegradable implant materials with tailored degradation behavior and bioactive features. In the current work, in vivo bioactivity of the composites was comprehensively studied by using sheep animal model. Five groups of specimens (Fe-HA, Fe-TCP, Fe-BCP composites, and pure-Fe and SS316L as controls) were surgically implanted into medio proximal region of the radial bones. Real-time ultrasound analysis showed a decreased echo pattern at the peri-implant biodegradation site of the composites indicating minimal tissue response during the wound healing process. Peripheral whole blood biomarkers monitoring showed a normal dynamic change of blood cellular responses and no stress effect was observed. Meanwhile, the released Fe ion concentration was increasing along the implantation period. Histological analysis showed that the composites corresponded with a lower inflammatory giant cell count than that of SS316L. Analysis of the retrieved implants showed a thicker degradation layer on the composites compared with pure-Fe. It can be concluded that the iron-bioceramic composites are bioactive and induce a preferable wound healing process.
Biocompatibility assessment of an integrated contraceptive and RFID-based intravaginal device in cats (Felis catus): A preliminary study

Santoso MIB, Ainun SS, Utami D, Aziz FA, Puspitaningsih R, Ashar Y, et al.

Open Vet J, 2024 Sep;14(9):2348-2360.
PMID: 39553770 DOI: 10.5455/OVJ.2024.v14.i9.23

BACKGROUND: An intravaginal device (IVD) made from polyethylene plastic and copper wire, integrated with a radio frequency identification (RFID) chip, was developed as a biocompatible contraceptive and identity device for cats.
AIM: This study evaluates the local and systemic biocompatibility of IVD in five non-pregnant female cats.
METHODS: The IVD was successfully inserted into the vaginal lumen after estrogen administration. Radiographic imaging confirmed the IVD's position, which lasted up to two days post-insertion.
RESULTS: Systemic response, assessed through hematological examinations on days 0, 1, and 3 post-insertion, showed no significant changes in erythrogram and leukogram parameters. Local response, evaluated through vulvar inspection and vaginal cytology on days 0, 1, 3, and 7, revealed no neutrophil infiltration in 4 out of 5 cats, indicating compatibility with vaginal tissue. Furthermore, epithelial cell profile changes were observed, showing an increase in superficial cells, which is typical during the estrus phase.
CONCLUSION: These findings suggest that the IVD is biocompatible and suitable for use as a contraceptive and identity device in cats. However, further long-term studies are necessary to evaluate the device's prolonged efficacy and potential for contraception failure prevention by mating trials.