Textile wastewater contains methylene blue (MB), a major coloring agent in textile industry. Activated carbon (AC) is the most widely used adsorbent in removing dyes from industrial wastewater. However, high production cost of AC is the major obstacle for its wide application in dye wastewater treatment. In this study, a sustainable approach in synthesizing graphenic adsorbent from palm oil mill effluent (POME), a potential carbonaceous source, has been explored. This new development in adsorption technique is considered as green synthesis as it does not require any binder during the synthesis process, and at the same time, it helps to solve the bottleneck of palm oil industry as POME is the main cause contributed to Malaysia's water pollution problem. The synthesized GSC was characterized through XRD, FESEM, and EDX. The adsorption performance of the synthesized GSC was evaluated by adsorption of MB. The effect of initial concentration of synthetic MB solution (1-20 mg/L) and weight of GSC (5-20 g) were investigated. A remarkable change in color of synthetic MB solution from blue to crystal clear was observed at the end of adsorption study. High efficiency of the synthesized GSC for dye-contaminated wastewater treatment is concluded.
Graphene oxide (GO) has displayed antibacterial activity that has been investigated in the past, however, information on synergistic activity of GO with conventional antibiotics is still lacking. The objectives of the study were to determine the combinatorial actions of GO and antibiotics against Gram-positive and Gram-negative bacteria and the toxicological effects of GO towards human epidermal keratinocytes (HaCaT). Interactions at molecular level between GO and antibiotics were analyzed using Attenuated Total Reflectance-Fourier-transform infrared spectroscopy (ATR-FTIR). Changes in the antibacterial activity of antibiotics towards bacteria through the addition of GO was investigated. Toxicity of GO towards HaCaT cells were examined as skin cells play a role as the first line of defense of the human body. The ATR-FTIR characterizations of GO and antibiotics showed adsorption of tested antibiotics onto GO. The combinatorial antibacterial activity of GO and antibiotics were found to increase when compared to GO or antibiotic alone. This was attributed to the ability of GO to disrupt bacterial membrane to allow for better adsorption of antibiotics. Cytotoxicity of GO was found to be dose-dependent towards HaCaT cell line, it is found to impose negligible toxic effects against the skin cells at concentration below 100 μg/mL.
The antimalarial properties of crude extracts from Quercus infectoria galls were investigated through bioassay-guided fractionation. Acetone (QIA) and methanol (QIM) crude extracts have been reported to have promising antimalarial activity against Plasmodium falciparum (3D7 strain). These extracts were subjected to fractionation using automated preparative high-performance liquid chromatography (prep-HPLC) to identify the most active fractions. Nine fractions were isolated from each extract, of which the fractions QIA11 and QIM16 showed antimalarial activity, with IC50 values of 17.65 ± 1.82 μg/mL and 24.21 ± 1.88 μg/mL, respectively. In comparison, the standard antimalarial drug artemisinin has an IC50 value of 0.004 ± 0.001 μg/mL). Through high-resolution liquid chromatography coupled with mass spectrometry (HR-LCMS) analysis of the fractions, four known compounds were successfully identified: gallic acid, ellagic acid, 1,3,6-tris-o-(3,4,5-trihydroxybenzoyl)-beta-d-glucose and 1-O,6-O-digalloyl-beta-D-glucose.
In this study, oil palm mesocarp fiber (OPMF) was treated with superheated steam (SHS) in order to modify its characteristics for biocomposite applications. Treatment was conducted at temperatures 190-230 °C for 1, 2 and 3 h. SHS-treated OPMF was evaluated for its chemical composition, thermal stability, morphology and crystallinity. OPMF treated at 230 °C exhibited lower hemicellulose content (9%) compared to the untreated OPMF (33%). Improved thermal stability of OPMF was found after the SHS treatment. Moreover, SEM and ICP analyses of SHS-treated OPMF showed that silica bodies were removed from OPMF after the SHS treatment. XRD results exhibited that OPMF crystallinity increased after SHS treatment, indicating tougher fiber properties. Hemicellulose removal makes the fiber surface more hydrophobic, whereby silica removal increases the surface roughness of the fiber. Overall, the results obtained herewith suggested that SHS is an effective treatment method for surface modification and subsequently improving the characteristics of the natural fiber. Most importantly, the use of novel, eco-friendly SHS may contribute to the green and sustainable treatment for surface modification of natural fiber.
Sodium phenoxide is a potentially promising hydrogen storage material due to its high hydrogen capacity and enhanced thermodynamic properties. Nevertheless, efficient catalysts are still lacking due to the high kinetic barrier for the reversible hydrogen uptake and release of sodium phenoxide. In the current work, a comparative study on the catalytic hydrogenation of sodium phenoxide was conducted. To our delight, a simple yet effective ruthenium-based catalyst was identified to respond aggressively to hydrogen in the solid-state hydrogenation of sodium phenoxide even at room temperature. The activity was enhanced by 6 fold with the as-synthesized 5.0% Ru/TiO2 catalyst as compared to that with commercial 5.0% Ru/Al2O3, respectively, under the same conditions.
Hydrazine borane (HB) is a chemical hydrogen storage material with high gravimetric hydrogen density of 15.4 wt%, containing both protic and hydridic hydrogen. However, its limitation is the formation of unfavorable gaseous by-products, such as hydrazine (N2H4) and ammonia (NH3), which are poisons to fuel cell catalyst, upon pyrolysis. Previous studies proved that confinement of ammonia borane (AB) greatly improved the dehydrogenation kinetics and thermodynamics. They function by reducing the particle size of AB and establishing bonds between silica functional groups and AB molecules. In current study, we employed the same strategy using MCM-41 and silica aerogel to investigate the effect of nanosizing towards the hydrogen storage properties of HB. Different loading of HB to the porous supports were investigated and optimized. The optimized loading of HB in MCM-41 and silica aerogel was 1:1 and 0.25:1, respectively. Both confined samples demonstrated great suppression of melting induced sample foaming. However, by-products formation was enhanced over dehydrogenation in an open system decomposition owing to the presence of extensive Si-O···BH3(HB) coordination that further promote the B-N bond cleavage to release N2H4. The Si-OH···N(N2H4) hydrogen bonding may further promote N-N bond cleavage in the resulting N2H4, facilitating the formation of NH3. As temperature increases, the remaining N-N-B oligomeric chains in the porous silica, which are lacking the long-range structure may further undergo intramolecular B-N or N-N cleavage to release substantial amount of N2H4 or NH3. Besides open system decomposition, we also reported a closed system decomposition where complete utilization of the N-H from the released N2H4 and NH3 in the secondary reaction can be achieved, releasing mainly hydrogen upon being heated up to high temperatures. Nanosizing of HB particles via PMMA encapsulation was also attempted. Despite the ester functional group that may favor multiple coordination with HB molecules, these interactions did not impart significant change towards the decomposition of HB selectively towards dehydrogenation.
Chicken plasma protein hydrolysate (CPPH) was prepared by trypsin with angiotensin I-converting enzyme (ACE) inhibitory activity of 53.5% ± 0.14% and the degree of hydrolysis (DH) of 16.22% ± 0.21% at 1 mg·ml-1; then, five proteases, including pepsin, trypsin, papain, alcalase, and neutrase, were employed to improve ACE inhibitory ability by catalyzing plastein reaction. The results indicated that trypsin-catalyzed plastein reaction showed the highest ACE inhibitory activity. The exogenous amino acids of leucine, histidine, tyrosine, valine, and cysteine were selected to modify the CPPH. The leucine-modified plastein reaction released the highest ACE inhibitory activity. The effects of four reaction parameters on plastein reaction were studied, and the optimal conditions with the purpose of obtaining the most powerful ACE inhibitory peptides from modified products were obtained by response surface methodology (RSM). The maximum ACE inhibition rate of the modified hydrolysate reached 82.07% ± 0.03% prepared at concentration of hydrolysates of 30%, reaction time of 4.9 hr, pH value of 8.0, temperature of 40°C, and E/S ratio of 5,681.62 U·g-1. The results indicated that trypsin-catalyzed plastein reaction increased ACE inhibitory activity of chicken plasma protein hydrolysates by 28.57%.