Today, virgin coconut oil (VCO) is becoming valuable oil and is receiving an attractive topic for researchers because of its several biological activities. In cosmetics industry, VCO is excellent material which functions as a skin moisturizer and softener. Therefore, it is important to develop a quantitative analytical method offering a fast and reliable technique. Fourier transform infrared (FTIR) spectroscopy with sample handling technique of attenuated total reflectance (ATR) can be successfully used to analyze VCO quantitatively in cream cosmetic preparations. A multivariate analysis using calibration of partial least square (PLS) model revealed the good relationship between actual value and FTIR-predicted value of VCO with coefficient of determination (R2) of 0.998.
The melting curves of 11 vegetable oils have been characterised. Vegetable oil samples that were cooled at a constant rate (5 degrees C/min) from the melt showed between one and seven melting endotherms upon heating at four different heating rates (1, 5, 10 and 20 degrees C/min) in a differential scanning calorimeter (DSC). Triacylglycerol (TAG) profiles and iodine value analyses were used to complement the DSC data. Generally, the melting transition temperature shifted to higher values with increased rates of heating. The breadth of the melting endotherm and the area under the melting peak also increased with increasing heating rate. Although the number of endothermic peaks was dependent on heating rate, the melting curves of the oil samples were not straightforward in that there was no correlation between the number of endothermic peaks and heating rates. Multiple melting behaviour in DSC experiments with different heating rates could be explained by: (1) the melting of TAG populations with different melting points; and (2) TAG crystal reorganisation effects. On the basis of the corollary results obtained, vegetable oils and fats may be distinguished from their offset-temperature (Toff) values in the DSC melting curves. The results showed that Toff values of all oil samples were significantly (p < 0.01) different in the melting curves scanned at four different scanning rates. These calorimetric results indicate that DSC is a valuable technique for studying vegetable oils.
Budu is a famous Malaysian fish sauce, usually used as seasoning and condiment in cooking. Budu is produced by mixing fish and salt at certain ratio followed by fermentation for six months in closed tanks. In this study, four commercial brands of Budu were analyzed for their chemical properties (pH, salt content and volatile compounds). The pH of Budu samples ranged from 4.50-4.92, while the salt (NaCl) content ranged between 11.80% and 22.50% (w/v). For tentative identification of volatile flavor compounds in Budu, two GC columns have been used, DB-WAX and HP-5MS. A total of 44 volatile compounds have been detected and 16 were common for both columns. 3-Methyl-1-butanol, 2-methylbutanal, 3-methylbutanal, dimethyl disulfide, 3-(methylthio)-propanal, 3-methylbutanoic acid and benzaldehye have been identified as the aroma-active compounds in Budu due to their lower threshold values.
Optimum processing conditions on palm oil-based formulations are required to produce the desired quality margarine. As oils and fats contribute to the overall property of the margarine, this paper will review the importance of beta' tending oils and fats in margarine formulation, effects of the processing parameters -- emulsion temperature, flow-rate, product temperature and pin-worker speed -- on palm oil margarines produced and their subsequent behaviour in storage. Palm oil, which contributes the beta' crystal polymorph and the best alternative to hydrogenated liquid fats, and the processing conditions can affect the margarine consistency by influencing the solid fat content (SFC) and the types of crystal polymorph formed during production as well as in storage. Palm oil, or hydrogenated palm oil and olein, in mixture with oils of beta tending, can veer the product to the beta' crystal form. However, merely having beta' crystal tending oils is not sufficient as the processing conditions are also important. The emulsion temperature had no significant effect on the consistency and polymorphic changes of the product during storage, even though differences were observed during processing. The consistency of margarine during storage was high at low emulsion flow-rates and low at high flow rates. The temperature of the scraped-surface tube-cooler is the most important parameter in margarine processing. High temperature will produce a hardened product with formation of beta-crystals during storage. The speed of the pin-worker is responsible for inducing crystallization but, at the same time, destroys the crystal agglomerates, resulting in melting.