Displaying all 9 publications

Abstract:
Sort:
  1. Hayashi Y, Shirotori K, Kosugi A, Kumada S, Leong KH, Okada K, et al.
    Pharmaceutics, 2020 Jun 28;12(7).
    PMID: 32605318 DOI: 10.3390/pharmaceutics12070601
    We previously reported a novel method for the precise prediction of tablet properties (e.g., tensile strength (TS)) using a small number of experimental data. The key technique of this method is to compensate for the lack of experimental data by using data of placebo tablets collected in a database. This study provides further technical knowledge to discuss the usefulness of this prediction method. Placebo tablets consisting of microcrystalline cellulose, lactose, and cornstarch were prepared using the design of an experimental method, and their TS and disintegration time (DT) were measured. The response surfaces representing the relationship between the formulation and the tablet properties were then created. This study investigated tablets containing four different active pharmaceutical ingredients (APIs) with a drug load ranging from 20-60%. Overall, the TS of API-containing tablets could be precisely predicted by this method, while the prediction accuracy of the DT was much lower than that of the TS. These results suggested that the mode of action of APIs on the DT was more complicated than that on the TS. Our prediction method could be valuable for the development of tablet formulations.
  2. Ito T, Okada K, Leong KH, Hirai D, Hayashi Y, Kumada S, et al.
    Chem Pharm Bull (Tokyo), 2019;67(3):271-276.
    PMID: 30828004 DOI: 10.1248/cpb.c18-00888
    The different states of water incorporated in wet granules were studied by a low-field benchtop 1H-NMR time-domain NMR (TD-NMR) instrument. Wet granules consisting different fillers [cornstarch (CS), microcrystalline cellulose (MCC), and D-mannitol (MAN)] with different water contents were prepared using a high-speed granulator, and then their spin-spin relaxation time (T2) was measured using the NMR relaxation technique. The experimental T2 relaxation curves were analyzed by the two-component curve fitting, and then the individual T2 relaxation behaviors of solid and water in wet granules were identified. According to the observed T2 values, it was confirmed that the molecular mobility of water in CS and MCC granules was more restricted than that in the MAN granule. The state of water appeared to be associated with the drying efficiency and moisture absorption capacity of wet granules. Thus, it was confirmed that the state of water significantly affected the wet granulation process and the characteristics of the resultant granules. In the final phase of this study, the effects of binders on the molecular mobility of water in granulation fluids and wet granules were examined. The state of water in granulation fluids was substantially changed by changing the binders. The difference was still detected in wet granules prepared by addition of these fluids to the fillers. In conclusion, TD-NMR can offer valuable knowledge on wet granulation from the viewpoint of molecular mobility of water.
  3. Ougi K, Okada K, Leong KH, Hayashi Y, Kumada S, Onuki Y
    Eur J Pharm Sci, 2020 Nov 01;154:105502.
    PMID: 32750421 DOI: 10.1016/j.ejps.2020.105502
    The purpose of this study was to investigate the effect of molecular mobility of water adsorbed by disintegrants on the hydrolytic degradation of active pharmaceutical ingredients (APIs). Fourteen different disintegrants were tested. First, powdered disintegrants were stored at conditions of 40 °C/75% relative humidity ("humid conditions") and their T2 relaxation times were measured by time-domain nuclear magnetic resonance for examination of the molecular mobility of water adsorbed by the disintegrant. From the observed T2 values, the water molecular mobility was fully characterized. In particular, the molecular mobility of water adsorbed by crospovidones was much higher than the molecular mobility of water adsorbed by the other test disintegrants because of longer T2 values. The next study examined the hydrolytic degradation of acetylsalicylic acid (ASA), a model moisture-sensitive API, stored under humid conditions. Physical mixtures of ASA and disintegrants or their model tablets were used as test samples, and they were stored for 7 d. The disintegrants contained in the samples clearly affected the ASA degradation: the most significant ASA degradation was observed for the crospovidone-containing samples. Finally, we analyzed the effect of the molecular mobility of water adsorbed by disintegrants on the ASA degradation by the least absolute shrinkage and selection operator (Lasso) regression techniques. As in the T2 experiment, various properties of disintegrants (i.e., water content, pH, and water activity) were used in this experiment as the explanatory variables. From the Lasso analysis, we successfully showed that the higher molecular mobility of water adsorbed by disintegrants significantly enhanced ASA degradation. These findings provide profound insights into the chemical stability of moisture-sensitive APIs in tablets.
  4. Ougi K, Hayashi Y, Tsuji T, Ito T, Hoong Leong K, Usuda S, et al.
    Int J Pharm, 2021 Jun 07.
    PMID: 34111545 DOI: 10.1016/j.ijpharm.2021.120770
    The application of time-domain NMR (TD-NMR) analysis to quantify water content in pharmaceutical ingredients is demonstrated. The initial phase of the study employed a range of disintegrants with defined amounts of added water (0-30% of the total weight) as samples; the disintegrants included croscarmellose sodium, corn starch, low-substituted hydroxypropyl cellulose, and crospovidone. After acquisition of the T2 relaxation curves of the samples by TD-NMR measurements, these curves were analyzed by partial least squares (PLS) regression. According to the analysis, accurate and reliable PLS models were created that enabled accurate assessment of water content in the samples. A powder blend consisting of acetaminophen (paracetamol) and tablet excipients was also examined. Both a physical mixture of the powder blend and a wet granule prepared with a high-speed granulator were tested as samples in this study. Precise determination of water content in the powder blend was achieved by using the TD-NMR method. The accuracy of water content determination was equivalent to or better than that of the conventional loss on drying method. TD-NMR analysis samples were measured nondestructively and rapidly with low cost; thus, it could be a powerful quantitative method for determining water content in pharmaceuticals.
  5. Kosugi A, Leong KH, Tsuji H, Hayashi Y, Kumada S, Okada K, et al.
    J Pharm Sci, 2020 Aug;109(8):2585-2593.
    PMID: 32473211 DOI: 10.1016/j.xphs.2020.05.010
    The purpose of this study was to accumulate enhanced technical knowledge about the powder properties of direct compaction grades of mannitol that could lead to new tablet formulations. Fifteen different commercial direct compaction grades of mannitol were tested. Ten different powder properties representing flowability, particle size, specific surface area and manufacturing properties were measured. In addition, model tablets of each mannitol grade were prepared, and their disintegration time, friability, and tensile strength were measured. The data were analyzed by principle component analysis and a Kohonen self-organizing map to find correlations between powder properties. Self-organizing map clustering successfully classified the test grades into 5 distinct clusters having different powder properties. Each cluster was well characterized by statistical profiling. Subsequently, the contribution of the powder properties to the tablet properties was investigated by a least absolute shrinkage- and selection operator (Lasso) regression model. Mannitol grades with a larger particle size (D90) were prone to produce tablets with longer disintegration time, while a larger specific surface area of the particles was positively associated with tablets with higher mechanical strength. Our findings provide valuable information for the design of tablet formulations.
  6. Chiba Y, Okada K, Hayashi Y, Leong KH, Kumada S, Onuki Y
    Chem Pharm Bull (Tokyo), 2022;70(2):162-168.
    PMID: 35110437 DOI: 10.1248/cpb.c21-00975
    NMR relaxometry measurement by time domain NMR (TD-NMR) is a promising technique for characterizing the properties of active pharmaceutical ingredients (APIs). This study is dedicated to identifying the salt and free base of APIs by NMR relaxometry measured by the TD-NMR technique. Procaine (PC) and tetracaine (TC) were selected as model APIs to be tested. By using conventional methods including powder X-ray diffraction and differential scanning calorimetry, this study first confirmed that the salt and free base of the tested APIs differ from each other in their crystalline form. Subsequently, measurements of T1 and T2 relaxation were performed on the tested APIs using TD-NMR. The results demonstrated that these NMR relaxometry measurements have sufficient capacity to distinguish the difference between the free base and salt of the tested APIs. Furthermore, quantification of the composition of the binary powder blends consisting of salt and free bases was conducted by analyzing the acquired T1 and T2 relaxation curves. The analysis of the T1 relaxation curves provided a partly acceptable estimation: a good estimation of the composition was observed from PC powders, whereas for TC powders the estimation accuracy changed with the free base content in the binary blends. For the analysis on T2 relaxation curves, a precise estimation of the composition was observed from all the samples. From these findings, the NMR relaxometry measurement by TD-NMR, in particular the T2 relaxation measurement, is effective for evaluating the properties of APIs having different crystalline forms.
  7. Tsuji T, Ono T, Taguchi H, Leong KH, Hayashi Y, Kumada S, et al.
    Chem Pharm Bull (Tokyo), 2023;71(7):576-583.
    PMID: 37394606 DOI: 10.1248/cpb.c23-00214
    Time-domain NMR (TD-NMR) was used for continuous monitoring of the hydration behavior of hydrophilic matrix tablets. The model matrix tablets comprised high molecular weight polyethylene oxide (PEO), hydroxypropyl methylcellulose (HPMC), and polyethylene glycol (PEG). The model tablets were immersed in water. Their T2 relaxation curves were acquired by TD-NMR with solid-echo sequence. A curve-fitting analysis was conducted on the acquired T2 relaxation curves to identify the NMR signals corresponding to the nongelated core remaining in the samples. The amount of nongelated core was estimated from the NMR signal intensity. The estimated values were consistent with the experiment measurement values. Next, the model tablets immersed in water were monitored continuously using TD-NMR. The difference in hydration behaviors of the HPMC and PEO matrix tablets was then characterized fully. The nongelated core of the HPMC matrix tablets disappeared more slowly than that of the PEO matrix tablets. The behavior of HPMC was significantly affected by the PEG content in the tablets. It is suggested that the TD-NMR method has potential to be utilized to evaluate the gel layer properties, upon replacement of the immersion medium: purified (nondeuterated) water is replaced with heavy (deuterated) water. Finally, drug-containing matrix tablets were tested. Diltiazem hydrochloride (a highly water-soluble drug) was employed for this experiment. Reasonable in vitro drug dissolution profiles, which were in accordance with the results from TD-NMR experiments, were observed. We concluded that TD-NMR is a powerful tool to evaluate the hydration properties of hydrophilic matrix tablets.
  8. Nakashima M, Kato M, Aoto K, Shiina M, Belal H, Mukaida S, et al.
    Ann Neurol, 2018 04;83(4):794-806.
    PMID: 29534297 DOI: 10.1002/ana.25208
    OBJECTIVE: The cytoplasmic fragile X mental retardation 1 interacting proteins 2 (CYFIP2) is a component of the WASP-family verprolin-homologous protein (WAVE) regulatory complex, which is involved in actin dynamics. An obvious association of CYFIP2 variants with human neurological disorders has never been reported. Here, we identified de novo hotspot CYFIP2 variants in neurodevelopmental disorders and explore the possible involvement of the CYFIP2 mutants in the WAVE signaling pathway.

    METHODS: We performed trio-based whole-exome sequencing (WES) in 210 families and case-only WES in 489 individuals with epileptic encephalopathies. The functional effect of CYFIP2 variants on WAVE signaling was evaluated by computational structural analysis and in vitro transfection experiments.

    RESULTS: We identified three de novo CYFIP2 variants at the Arg87 residue in 4 unrelated individuals with early-onset epileptic encephalopathy. Structural analysis indicated that the Arg87 residue is buried at an interface between CYFIP2 and WAVE1, and the Arg87 variant may disrupt hydrogen bonding, leading to structural instability and aberrant activation of the WAVE regulatory complex. All mutant CYFIP2 showed comparatively weaker interactions to the VCA domain than wild-type CYFIP2. Immunofluorescence revealed that ectopic speckled accumulation of actin and CYFIP2 was significantly increased in cells transfected with mutant CYFIP2.

    INTERPRETATION: Our findings suggest that de novo Arg87 variants in CYFIP2 have gain-of-function effects on the WAVE signaling pathway and are associated with severe neurological disorders. Ann Neurol 2018;83:794-806.

  9. Sakamoto M, Iwama K, Sasaki M, Ishiyama A, Komaki H, Saito T, et al.
    Genet Med, 2022 Dec;24(12):2453-2463.
    PMID: 36305856 DOI: 10.1016/j.gim.2022.08.007
    PURPOSE: Cerebellar hypoplasia and atrophy (CBHA) in children is an extremely heterogeneous group of disorders, but few comprehensive genetic studies have been reported. Comprehensive genetic analysis of CBHA patients may help differentiating atrophy and hypoplasia and potentially improve their prognostic aspects.

    METHODS: Patients with CBHA in 176 families were genetically examined using exome sequencing. Patients with disease-causing variants were clinically evaluated.

    RESULTS: Disease-causing variants were identified in 96 of the 176 families (54.5%). After excluding 6 families, 48 patients from 42 families were categorized as having syndromic associations with CBHA, whereas the remaining 51 patients from 48 families had isolated CBHA. In 51 patients, 26 aberrant genes were identified, of which, 20 (76.9%) caused disease in 1 family each. The most prevalent genes were CACNA1A, ITPR1, and KIF1A. Of the 26 aberrant genes, 21 and 1 were functionally annotated to atrophy and hypoplasia, respectively. CBHA+S was more clinically severe than CBHA-S. Notably, ARG1 and FOLR1 variants were identified in 2 families, leading to medical treatments.

    CONCLUSION: A wide genetic and clinical diversity of CBHA was revealed through exome sequencing in this cohort, which highlights the importance of comprehensive genetic analyses. Furthermore, molecular-based treatment was available for 2 families.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links