Displaying all 8 publications

Abstract:
Sort:
  1. Tahir HM, Ismail NN, Gebbie DA
    Asia Oceania J Obstet Gynaecol, 1991 Jun;17(2):135-42.
    PMID: 1867582
    Low birth weight babies are defined as those weighing under 2,500 g. They make 13.5% of all births at the Maternity Hospital, Kuala Lumpur but contribute to 74.8% of all deaths. They are most likely to be Indian babies and least likely to be Chinese. Among all 3 communities, the primigravidae tend to produce smaller babies than multiparae but this is also true for the Indian of parity more than 3. The Malay teenager is more likely to produce small babies than their older counterparts but not so with the Indian and Chinese. There are definite clinical factors associated with or causing the births of small babies and the lighter the baby, the more influential are these factors. Maternal hypertension, antepartum haemorrhage, multiple pregnancy and unexplained intrauterine death are the 4 outstanding associations with both low birth weight and perinatal death. Although the spontaneous (often premature) onset of labour was the commonest preceding factor, it was much less important in the lowest birth weight groups of babies and was a less important contributor to perinatal death.
  2. Hamzan MI, Wan Sulaiman WA, Ismail NN
    J Plast Surg Hand Surg, 2022 Feb;56(1):30-37.
    PMID: 33840334 DOI: 10.1080/2000656X.2021.1908313
    Researchers have long tried to search for the 'perfect' aesthetic outcome of breast surgery. Although lots of anthropometric studies have been done, there is no consensus when dealing with harmony, abstract, and proportion that make up for its ideal shape. This study was convened via a survey to find the most perfect breast shape by assessing the upper pole contour and upper pole to lower pole ratio (UP:LP) preference among the Malays, Chinese, and Indians races. Hundred thirty-five individuals partook in this survey. Most of the participants generally preferred a more convex shape of upper pole contour with the Malay (50%) and Indian (35.7%) favored a more convex shape while the Chinese preferred it to be just slightly convex (42.8%). Single unmarried individuals (64.7%) significantly preferred a more convex upper pole contour (p = 0.018). The UP:LP ratio of 45:55 (p = 0.002) was the most significantly preferred proportion (37.8%) which largely comprised of the Chinese (51%), followed by Indian (21.6%) and Malay (19.6%). With these findings, using a controlled perception-preference method is a more preferred choice when describing an ideal breast shape as compare to an anthropometric measurement that might be less accurate. Therefore, breast and plastic surgeons alike need to look beyond the anthropometric numbers and should consider the other 'abstract' aesthetic shape which difficult to measure including the upper pole breast that has more convexity and the UP:LP ratio of 45:55 which showed to be the most aesthetically perfect form as agreed in the current works of literature.
  3. Ahmad H, Ramli R, Ismail NN, Aidit SN, Yusoff N, Samion MZ
    Sci Rep, 2021 Jun 02;11(1):11652.
    PMID: 34078979 DOI: 10.1038/s41598-021-90978-x
    As a result of the emergence of two-dimensional (2D) materials for various opto-electronics applications, a new class of materials named MXenes have been attracting interests due to their outstanding nonlinear properties. In this work, an MXene niobium carbide (Nb2C) was proposed and demonstrated as a saturable absorber to induce mode-locking in thulium- and thulium/holmium-doped fiber lasers. The Nb2C solution was first prepared using the liquid exfoliation technique, and then deposited onto a microfiber for integration into the laser cavity. Stable mode-locking operation was observed in both laser cavities, where the center wavelengths of the laser were recorded at 1944 nm for the TDFL and 1950 nm for the THDFL. The generated pulses in the TDFL and THDFL had repetition rates of 9.35 and 11.76 MHz respectively, while their corresponding pulse widths were 1.67 and 1.34 ps. Both of the lasers were highly stable, having SNR values of more than 52 dB and showed no major fluctuations when tested for their long-term stabilities. The results demonstrate an excellent performance of the Nb2C as a saturable absorber, offering opportunities to further explore MXenes for future photonics devices.
  4. Hamzan MI, Sulaiman WAW, Ismail NN
    Indian J Plast Surg, 2021 Sep;54(3):321-326.
    PMID: 34667518 DOI: 10.1055/s-0041-1734572
    Background It is important to correctly determine the ideal female breast anatomy and aesthetic proportions in order to prepare for surgery and establish its goals. Leaving the preference to the operating surgeons alone might leave unsatisfactory results, which especially leads to reoperation, quite often in the aspect of breast dimension. Methods This study was conducted using an online graphic questionnaire. We attempted to seek male and female perspectives toward their preferred ideal female breast size for breast augmentation, in order to provide up-to-date data to assist breast surgeons in attaining satisfactory surgical results. Results Sixty males and 67 females participated in the study comprising Asian major ethnicities of Malay, Chinese, and Indian. Universally, 46.6% of men and 53.5% of women preferred 30 mm diameter for the most ideal nipple-areola complex (NAC) size. For the perfect bust, they generally favored size C and D cup (37.8% and 38.5%, respectively). Conclusion The majority of women seek natural breast beauty and the longing for an oversized look appears to have infiltrated practice but these assumptions have finally been challenged by these findings.
  5. Mohamad S, Ismail NN, Parumasivam T, Ibrahim P, Osman H, A Wahab H
    BMC Complement Altern Med, 2018 Jan 08;18(1):5.
    PMID: 29310671 DOI: 10.1186/s12906-017-2077-5
    BACKGROUND: Costus speciosus, Cymbopogon citratus, and Tabernaemontana coronaria are herbal plants traditionally used as remedies for symptoms of tuberculosis (TB) including cough. The aims of the present study were to evaluate the in vitro anti-TB activity of different solvent partitions of these plants, to identify the phytochemical compounds, and to assess the effects of the most active partitions on the growth kinetics and cellular integrity of the tubercle organism.

    METHODS: The in vitro anti-TB activity of different solvent partitions of the plant materials was determined against M. tuberculosis H37Rv using a tetrazolium colorimetric microdilution assay. The phytochemical compounds in the most active partition of each plant were identified using gas chromatography-mass spectrometry (GC-MS) analysis. The effects of these partitions on the growth kinetics of the mycobacteria were evaluated over 7-day treatment period in a batch culture system. Their effects on the mycobacterial cellular integrity were observed under a scanning electron microscope (SEM).

    RESULTS: The respective n-hexane partition of C. speciosus, C. citratus, and T. coronaria exhibited the highest anti-TB activity with minimum inhibitory concentrations (MICs) of 100-200 μg/mL and minimum bactericidal concentration (MBC) of 200 μg/mL. GC-MS phytochemical analysis of these active partitions revealed that majority of the identified compounds belonged to lipophilic fatty acid groups. The active partitions of C. speciosus and T. coronaria exhibited high cidal activity in relation to time, killing more than 99% of the cell population. SEM observations showed that these active plant partitions caused multiple structural changes indicating massive cellular damages.

    CONCLUSIONS: The n-hexane partition of the plant materials exhibited promising in vitro anti-TB activity against M. tuberculosis H37Rv. Their anti-TB activity was supported by their destructive effects on the integrity of the mycobacterial cellular structure.

  6. Ismail AM, Remli MA, Choon YW, Nasarudin NA, Ismail NN, Ismail MA, et al.
    J Integr Bioinform, 2023 Jun 01;20(2).
    PMID: 37341516 DOI: 10.1515/jib-2022-0051
    Analyzing metabolic pathways in systems biology requires accurate kinetic parameters that represent the simulated in vivo processes. Simulation of the fermentation pathway in the Saccharomyces cerevisiae kinetic model help saves much time in the optimization process. Fitting the simulated model into the experimental data is categorized under the parameter estimation problem. Parameter estimation is conducted to obtain the optimal values for parameters related to the fermentation process. This step is essential because insufficient identification of model parameters can cause erroneous conclusions. The kinetic parameters cannot be measured directly. Therefore, they must be estimated from the experimental data either in vitro or in vivo. Parameter estimation is a challenging task in the biological process due to the complexity and nonlinearity of the model. Therefore, we propose the Artificial Bee Colony algorithm (ABC) to estimate the parameters in the fermentation pathway of S. cerevisiae to obtain more accurate values. A metabolite with a total of six parameters is involved in this article. The experimental results show that ABC outperforms other estimation algorithms and gives more accurate kinetic parameter values for the simulated model. Most of the estimated kinetic parameter values obtained from the proposed algorithm are the closest to the experimental data.
  7. Ahmad M, Lim CP, Akowuah GA, Ismail NN, Hashim MA, Hor SY, et al.
    Phytomedicine, 2013 Sep 15;20(12):1124-30.
    PMID: 23827665 DOI: 10.1016/j.phymed.2013.05.005
    The present study aims to evaluate the safety of methanol extract of Cinnamomum burmannii (MECB) by acute 14-day (single dose) and sub-chronic 28-day (repeated doses) oral administration to Sprague-Dawley rats. Our results showed that no toxicity was found in either acute or sub-chronic toxicity studies. MECB (containing 0.07% and 0.20% (w/w) of coumarin and trans-cinnamaldehyde, respectively), which was given orally at doses of 500, 1000 and 2000 mg/kg caused neither visible signs of toxicity nor mortality. No significant differences were observed in general condition, growth, organ weight, hematological parameters, biochemical values, or the gross and microscopic appearance of the organs from the treatment groups as compared to the control group. In conclusion, MECB did not cause any mortality nor did it cause any abnormalities in the necropsy and histopathology findings of treated rats. The LD50 for the MECB was found to be more than 2000 mg/kg. No adverse effects were observed in the treated rats at all the doses tested. The no-observed-adverse-effect level (NOAEL) for the 28-day study was determined to be 2000 mg/kg body weight/day.
  8. Noviany N, Samadi A, Yuliyan N, Hadi S, Aziz M, Purwitasari N, et al.
    Phytochem Lett, 2020 Feb;35:211-215.
    PMID: 32863985 DOI: 10.1016/j.phytol.2019.12.008
    A new 2-arylbenzofuran, sesbagrandiflorain C (1), together with four known compounds, 2-(3,4-dihydroxy-2-methoxyphenyl)-4-hydroxy-6-methoxybenzofuran-3-carbaldehyde (2), 2-(4-hydroxy-2-methoxyphenyl)-5,6-dimethoxybenzofuran-3-carboxaldehyde (3), sesbagrandiflorain A (4) and sesbagrandiflorain B (5), have been isolated from the stem bark of an Indonesian plant, Sesbania grandiflora (L.) Pers. The chemical structure of compound 1 was elucidated by UV, IR, MS, and NMR spectroscopic techniques. The proton and carbon NMR resonances of 1 were also compared with the predicted chemical shifts obtained from DFT quantum mechanical calculations with Gaussian. None of the compounds showed antibacterial activity against Bacillus subtilis, Escherichia coli, Mycobacterium smegmatis, Pseudomonas aeruginosa, and Staphylococcus aureus in an agar diffusion assay. However, sesbagrandiflorains A (4) and B (5) exhibited moderate activity against Mycobacterium tuberculosis H37Rv. In addition, compounds 1 - 5 have moderate cytotoxicity against HeLa, HepG2, and MCF-7 cancer cell lines.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links