Displaying all 16 publications

Abstract:
Sort:
  1. Fulltext Cadmium Sulphide-Reduced Graphene Oxide-Modified Photoelectrode-Based Photoelectrochemical Sensing Platform for Copper(II) Ions
    Ibrahim I, Lim HN, Huang NM, Pandikumar A
    PLoS One, 2016;11(5):e0154557.
    PMID: 27176635 DOI: 10.1371/journal.pone.0154557
    A photoelectrochemical (PEC) sensor with excellent sensitivity and detection toward copper (II) ions (Cu2+) was developed using a cadmium sulphide-reduced graphene oxide (CdS-rGO) nanocomposite on an indium tin oxide (ITO) surface, with triethanolamine (TEA) used as the sacrificial electron donor. The CdS nanoparticles were initially synthesized via the aerosol-assisted chemical vapor deposition (AACVD) method using cadmium acetate and thiourea as the precursors to Cd2+ and S2-, respectively. Graphene oxide (GO) was then dip-coated onto the CdS electrode and sintered under an argon gas flow (50 mL/min) for the reduction process. The nanostructured CdS was adhered securely to the ITO by a continuous network of rGO that also acted as an avenue to intensify the transfer of electrons from the conduction band of CdS. The photoelectrochemical results indicated that the ITO/CdS-rGO photoelectrode could facilitate broad UV-visible light absorption, which would lead to a higher and steady-state photocurrent response in the presence of TEA in 0.1 M KCl. The photocurrent decreased with an increase in the concentration of Cu2+ ions. The photoelectrode response for Cu2+ ion detection had a linear range of 0.5-120 μM, with a limit of detection (LoD) of 16 nM. The proposed PEC sensor displayed ultra-sensitivity and good selectivity toward Cu2+ ion detection.
  2. Horseradish peroxidase-labeled silver/reduced graphene oxide thin film-modified screen-printed electrode for detection of carcinoembryonic antigen
    Lee SX, Lim HN, Ibrahim I, Jamil A, Pandikumar A, Huang NM
    Biosens Bioelectron, 2017 Mar 15;89(Pt 1):673-680.
    PMID: 26718548 DOI: 10.1016/j.bios.2015.12.030
    In this study, a disposable and simple electrochemical immunosensor was fabricated for the detection of carcinoembryonic antigen. In this method, silver nanoparticles (AgNPs) were mixed with reduced graphene oxide (rGO) to modify the surface of screen-printed carbon electrode (SPE). Initially, AgNPs-rGO modified-SPEs were fabricated by using simple electrochemical deposition method. Then the carcinoembryonic antigen (CEA) was immobilized between the primary antibody and horseradish peroxidase (HRP)-conjugated secondary antibody onto AgNPs-rGO modified-SPEs to fabricate a sandwich-type electrochemical immunosensor. The proposed method could detect the CEA with a linear range of 0.05-0.50µgmL-1 and a detection limit down to 0.035µgmL-1 as compared to its non-sandwich counterpart, which yielded a linear range of 0.05-0.40µgmL-1, with a detection limit of 0.042µgmL-1. The immunosensor showed good performance in the detection of carcinoembryonic antigen, exhibiting a simple, rapid and low-cost. The immunosensor showed a higher sensitivity than an enzymeless sensor.
  3. Utilization of reduced graphene oxide/cadmium sulfide-modified carbon cloth for visible-light-prompt photoelectrochemical sensor for copper (II) ions
    Foo CY, Lim HN, Pandikumar A, Huang NM, Ng YH
    J Hazard Mater, 2016 Mar 5;304:400-8.
    PMID: 26595899 DOI: 10.1016/j.jhazmat.2015.11.004
    A newly developed CdS/rGO/CC electrode was prepared based on a flexible carbon cloth (CC) substrate with cadmium sulfide (CdS) nanoparticles and reduced graphene oxide (rGO). The CdS was synthesized using an aerosol-assisted chemical vapor deposition (AACVD) method, and the graphene oxide was thermally reduced on the modified electrode surface. The existence of rGO in the CdS-modified electrode increased the photocurrent intensity of the CdS/rGO/CC-modified electrode by three orders of magnitude, compared to that of the CdS/ITO electrode and two orders of magnitude higher than the CdS/CC electrode. A new visible-light-prompt photoelectrochemical sensor was developed based on the competitive binding reaction of Cu(2+) and CdS on the electrode surface. The results showed that the effect of the Cu(2+) on the photocurrent response was concentration-dependent over the linear ranges of 0.1-1.0 μM and 1.0-40.0 μM with a detection limit of 0.05 μM. The results of a selectivity test showed that this modified electrode has a high response toward Cu(2+) compared to other heavy metal ions. The proposed CdS/rGO/CC electrode provided a significantly high potential current compared to other reported values, and could be a practical tool for the fast, sensitive, and selective determination of Cu(2+).
  4. Fabrication of graphene/gold-modified screen-printed electrode for detection of carcinoembryonic antigen
    Chan KF, Lim HN, Shams N, Jayabal S, Pandikumar A, Huang NM
    Mater Sci Eng C Mater Biol Appl, 2016 Jan 1;58:666-74.
    PMID: 26478358 DOI: 10.1016/j.msec.2015.09.010
    Immunosensors based on gold nanoparticles and reduced graphene oxide (AuNPs/rGO)-modified screen-printed electrodes (SPEs) were successfully synthesized using an electrochemical deposition method. The modified SPEs were characterized using a field emission scanning electron microscope (FESEM) and Raman spectroscopy to analyze the morphology and composition of AuNPs and rGO. Both the FESEM and Raman spectroscopy revealed that the AuNPs were successfully anchored on the thin film of rGO deposited on the surface of the SPEs. Characterization with a ferri-ferrocyanide couple [Fe(CN)6(3-/4-)] showed that the electron transfer kinetic between the analyte and electrode was enhanced after the modification with the AuNPs/rGO composite on the electrode surface, in addition to increasing the effective surface area of the electrode. The modified SPE was immobilized with a sandwich type immunosensor to mimic the ELISA (enzyme-linked immunosorbent assay) immunoassay. The modified SPE that was fortified with the sandwich type immunosensor exhibited double electrochemical responses in the detection of carcinoembryonic antigen (CEA), with linear ranges of 0.5-50 ng/mL and 250-2000 ng/mL and limits of detection of 0.28 ng/mL and 181.5 ng/mL, respectively.
  5. Fulltext Author Correction: Electrochemical Performance of Supercapacitor with Stacked Copper Foils Coated with Graphene Nanoplatelets
    Chiam SL, Lim HN, Hafiz SM, Pandikumar A, Huang NM
    Sci Rep, 2018 Jul 12;8(1):10830.
    PMID: 29997395 DOI: 10.1038/s41598-018-28897-7
    A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.
  6. Fulltext Electrochemical Performance of Supercapacitor with Stacked Copper Foils Coated with Graphene Nanoplatelets
    Chiam SL, Lim HN, Hafiz SM, Pandikumar A, Huang NM
    Sci Rep, 2018 02 15;8(1):3093.
    PMID: 29449631 DOI: 10.1038/s41598-018-21572-x
    The energy density of conventional supercapacitors is in the range of 6-10 Wh kg-1, which has restricted them from many applications that require devices with long durations. Herein, we report a method for enhancing the energy density of a device through the parallel stacking of five copper foils coated on each side with graphene nanoplatelets. Microporous papers immersed in 2 M aqueous sodium sulphate were used as separators. With a low contact resistance of 0.05 Ω, the supercapacitor yielded an optimum specific energy density and a specific power density of 24.64 Wh kg-1 and 402 W kg-1 at 0.8 V, respectively. The working potential was increased to 2.4 V when three of the supercapacitors were connected in series, forming a tandem device. Its potential for real applications was manifested by the ability to light up a light-emitting diode for 40 s after charging for 60 s.
  7. Using walnut shells as low-cost adsorbent materials in an anaerobic filter medium of a De-centralized wastewater treatment system (DEWATS)
    Zaheer M, Ali MS, Huang N, Ashraf MA
    Chemosphere, 2023 Nov;341:140080.
    PMID: 37678602 DOI: 10.1016/j.chemosphere.2023.140080
    The flow of unprocessed sewage through municipal sewers is a great source of water contamination. This study aims to observe the pollutants removal efficiencies of walnut shells as an efficient low-cost adsorbent material compared to gravel materials as an anaerobic filter medium. Two models of the De-Centralized Wastewater Treatment System (DEWATS) were constructed. The wastewater flowing from toilets and handwashing places was connected to anaerobic filters filled with walnut shells and gravel. The efficiency of both filter media in the removal of biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), total dissolved solids (TDS), nitrate (NO3), and phosphate (PO43), pH and temperature were observed at the influent of the settler tank and then at the effluent of the collection tank (CT). Temperature and pH were within the acceptable limit of wastewater discharge. The results also indicated that the walnut shells filter media was more efficient at removing organic pollutants (TSS 94%, BOD5 88%, COD 85%, Nitrate 57%, phosphate 46%, and TDS 29%) than the gravel (TSS 81%, BOD5 82%, COD 84%, Nitrate 35%, phosphate 38%, and TDS 26%) at the successive stages. The average removal efficiency of the walnut shell was 88% while in the gravel case, it was 83%. The removal efficiency of walnut shell filters was extensively better over the complete experiment compared to gravel filters for the removal of pollutants, representing the high sorption capability of the walnut shell material. The results of this study show that the walnut shells may be a very useful substitute for other conventional fillers for anaerobic treatment in the anaerobic filter of DEWATS.
  8. Fulltext Fabrication and characterization of graphene hydrogel via hydrothermal approach as a scaffold for preliminary study of cell growth
    Lim HN, Huang NM, Lim SS, Harrison I, Chia CH
    Int J Nanomedicine, 2011;6:1817-23.
    PMID: 21931479 DOI: 10.2147/IJN.S23392
    BACKGROUND: Three-dimensional assembly of graphene hydrogel is rapidly attracting the interest of researchers because of its wide range of applications in energy storage, electronics, electrochemistry, and waste water treatment. Information on the use of graphene hydrogel for biological purposes is lacking, so we conducted a preliminary study to determine the suitability of graphene hydrogel as a substrate for cell growth, which could potentially be used as building blocks for biomolecules and tissue engineering applications.

    METHODS: A three-dimensional structure of graphene hydrogel was prepared via a simple hydrothermal method using two-dimensional large-area graphene oxide nanosheets as a precursor.

    RESULTS: The concentration and lateral size of the graphene oxide nanosheets influenced the structure of the hydrogel. With larger-area graphene oxide nanosheets, the graphene hydrogel could be formed at a lower concentration. X-ray diffraction patterns revealed that the oxide functional groups on the graphene oxide nanosheets were reduced after hydrothermal treatment. The three-dimensional graphene hydrogel matrix was used as a scaffold for proliferation of a MG63 cell line.

    CONCLUSION: Guided filopodia protrusions of MG63 on the hydrogel were observed on the third day of cell culture, demonstrating compatibility of the graphene hydrogel structure for bioapplications.

  9. Fulltext Simple room-temperature preparation of high-yield large-area graphene oxide
    Huang NM, Lim HN, Chia CH, Yarmo MA, Muhamad MR
    Int J Nanomedicine, 2011;6:3443-8.
    PMID: 22267928 DOI: 10.2147/IJN.S26812
    Graphene has attracted much attention from researchers due to its interesting mechanical, electrochemical, and electronic properties. It has many potential applications such as polymer filler, sensor, energy conversion, and energy storage devices. Graphene-based nanocomposites are under an intense spotlight amongst researchers. A large amount of graphene is required for preparation of such samples. Lately, graphene-based materials have been the target for fundamental life science investigations. Despite graphene being a much sought-after raw material, the drawbacks in the preparation of graphene are that it is a challenge amongst researchers to produce this material in a scalable quantity and that there is a concern about its safety. Thus, a simple and efficient method for the preparation of graphene oxide (GO) is greatly desired to address these problems. In this work, one-pot chemical oxidation of graphite was carried out at room temperature for the preparation of large-area GO with ~100% conversion. This high-conversion preparation of large-area GO was achieved using a simplified Hummer's method from large graphite flakes (an average flake size of 500 μm). It was found that a high degree of oxidation of graphite could be realized by stirring graphite in a mixture of acids and potassium permanganate, resulting in GO with large lateral dimension and area, which could reach up to 120 μm and ~8000 μm(2), respectively. The simplified Hummer's method provides a facile approach for the preparation of large-area GO.
  10. Thirty-year trends of depressive disorders in 204 countries and territories from 1990 to 2019: An age-period-cohort analysis
    Yang F, Lodder P, Huang N, Liu X, Fu M, Guo J
    Psychiatry Res, 2023 Oct;328:115433.
    PMID: 37651839 DOI: 10.1016/j.psychres.2023.115433
    This study aims to estimate the global, regional, and national burden of depressive disorders in 204 countries and territories from 1990 to 2019. All data were obtained from the 2019 Global Burden of Disease (GBD) study. Age-period-cohort (APC) modeling was conducted to disentangle age, period, and birth cohort effects on depression incidence. We compared these estimates across regions classified based on their socio-demographic index (SDI). The Estimated Annual Percentage Change (EAPC) was calculated for each of the 204 countries and territories to identify the top five countries with increased depression incidence (Spain, Mexico, Malaysia, the United States of America, and Uruguay) and the top five countries with decreased depression incidence (Singapore, Estonia, Cuba, Maldives, and Sri Lanka). The results from APC analysis indicate that although depression incidence has decreased globally, the incidence rate in high SDI regions is still increasing, especially in the younger generations. Findings suggest that currently some populations are in need of receiving more psychological support (i.e., individuals born after 1950s in high SDI regions; males in middle SDI regions). Forthcoming studies could corroborate our findings using individual-level data which may guide future prevention and intervention of depression in high-risk populations or regions.
  11. Fulltext Glycyrrhizic Acid: A Natural Plant Ingredient as a Drug Candidate to Treat COVID-19
    Sun Z, He G, Huang N, Thilakavathy K, Lim JCW, Kumar SS, et al.
    Front Pharmacol, 2021;12:707205.
    PMID: 34305613 DOI: 10.3389/fphar.2021.707205
    The total number of cumulative cases and deaths from the COVID-19 pandemic caused by SARS-CoV-2 is still increasing worldwide. Although many countries have actively implemented vaccination strategies to curb the epidemic, there is no specific efficient therapeutic drug for this virus to effectively reduce deaths. Therefore, the underappreciated macromolecular compounds have become the spotlight of research. Furthermore, the medicinal compounds in plants that provide myriad possibilities to treat human diseases have become of utmost importance. Experience indicates that Traditional Chinese medicine effectively treats SARS and has been used for treating patients with COVID-19 in China. As one of the world's oldest herbal remedies, licorice is used for treating patients with all stages of COVID-19. Glycyrrhizic acid (GA), the main active compound in licorice, has been proven effective in killing the SARS virus. Meanwhile, as a natural plant molecule, GA can also directly target important protein structures of the SARS-CoV-2 virus and inhibit the replication of SARS-CoV-2. In this review, we summarized the immune synergy of GA and its potential role in treating COVID-19 complications. Besides, we reviewed its anti-inflammatory effects on the immune system and its positive effects in cooperation with various drugs to fight against COVID-19 and its comorbidities. The purpose of this review is to elucidate and suggest that GA can be used as a potential drug during COVID-19 treatment.
  12. Piezoresistive Effect in Plasma-Doping of Graphene Sheet for High-Performance Flexible Pressure Sensing Application
    Haniff MASM, Hafiz SM, Huang NM, Rahman SA, Wahid KAA, Syono MI, et al.
    ACS Appl Mater Interfaces, 2017 May 03;9(17):15192-15201.
    PMID: 28418234 DOI: 10.1021/acsami.7b02833
    This paper presents a straightforward plasma treatment modification of graphene with an enhanced piezoresistive effect for the realization of a high-performance pressure sensor. The changes in the graphene in terms of its morphology, structure, chemical composition, and electrical properties after the NH3/Ar plasma treatment were investigated in detail. Through a sufficient plasma treatment condition, our studies demonstrated that plasma-treated graphene sheet exhibits a significant increase in sensitivity by one order of magnitude compared to that of the unmodified graphene sheet. The plasma-doping introduced nitrogen (N) atoms inside the graphene structure and was found to play a significant role in enhancing the pressure sensing performance due to the tunneling behavior from the localized defects. The high sensitivity and good robustness demonstrated by the plasma-treated graphene sensor suggest a promising route for simple, low-cost, and ultrahigh resolution flexible sensors.
  13. UPLC/Q-TOF-MS-based Metabolomics Study of the Antiosteoporosis Effects of Vaccarin in Ovariectomized Mice
    Song F, Xie T, Liu X, Chin B, Luo X, Liao S, et al.
    Planta Med, 2023 Feb;89(2):218-230.
    PMID: 36100252 DOI: 10.1055/a-1942-5428
    Osteoporosis is a systemic and metabolic bone disease that usually occurs in postmenopausal women, which mainly manifests as bone loss and increased bone fragility that both facilitate fracture. However, few drugs for osteoporosis have shown good efficacy and limited side effects. Vaccarin has demonstrated its antiosteoporosis effects by inhibiting the formation and osteolytic activities of osteoclasts in our previous investigation. In this study, multivariate statistical analysis and ultrahigh-performance liquid chromatography and quadrupole time-of-flight tandem mass spectrometry were used to analyze the serum metabolites of ovariectomized mice treated with or without vaccarin. As a result, 9 serum metabolites were identified as biomarkers. The metabolic levels of 3 crucial biomarkers, namely, lysophosphatidylcholine [22 : 6, (4Z, 7Z, 10Z, 13Z, 16Z, 19Z)], 1-linoleoylglycerophosphocholine and 1-palmitoyl-Sn-glycero-3-phosphocholine, that were correlated with glycerophospholipid metabolism increased and then decreased significantly after vaccarin treatment. Molecular docking analysis and osteoclasts differentiation experiment further revealed that vaccarin may bind with phospholipase A2 and downregulated its activity to reduce the osteoclastogenesis. Therefore, the occurrence of osteoporosis is closely related with glycerophospholipid metabolism disorders, and vaccarin exerts antiosteoporosis effects by reducing the levels of glycerophospholipid metabolites.
  14. Fulltext Piezoresistive effects in controllable defective HFTCVD graphene-based flexible pressure sensor
    Mohammad Haniff MA, Muhammad Hafiz S, Wahid KA, Endut Z, Wah Lee H, Bien DC, et al.
    Sci Rep, 2015;5:14751.
    PMID: 26423893 DOI: 10.1038/srep14751
    In this work, the piezoresistive effects of defective graphene used on a flexible pressure sensor are demonstrated. The graphene used was deposited at substrate temperatures of 750, 850 and 1000 °C using the hot-filament thermal chemical vapor deposition method in which the resultant graphene had different defect densities. Incorporation of the graphene as the sensing materials in sensor device showed that a linear variation in the resistance change with the applied gas pressure was obtained in the range of 0 to 50 kPa. The deposition temperature of the graphene deposited on copper foil using this technique was shown to be capable of tuning the sensitivity of the flexible graphene-based pressure sensor. We found that the sensor performance is strongly dominated by the defect density in the graphene, where graphene with the highest defect density deposited at 750 °C exhibited an almost four-fold sensitivity as compared to that deposited at 1000 °C. This effect is believed to have been contributed by the scattering of charge carriers in the graphene networks through various forms such as from the defects in the graphene lattice itself, tunneling between graphene islands, and tunneling between defect-like structures.
  15. Fulltext Impact of the Inflow Population From Outbreak Areas on the COVID-19 Epidemic in Yunnan Province and the Recommended Control Measures: A Preliminary Study
    Sun Z, He G, Huang N, Chen H, Zhang S, Zhao Z, et al.
    Front Public Health, 2020;8:609974.
    PMID: 33344408 DOI: 10.3389/fpubh.2020.609974
    Background: COVID-19 developed into a global pandemic in 2020 and poses challenges regarding the prevention and control capabilities of countries. A large number of inbound travelers from other regions could lead to a renewed outbreak of COVID-19 in the local regions. Globally, as a result of the imbalance in the control of the epidemic, all countries are facing the risk of a renewed COVID-19 outbreak brought about by travelers from epidemic areas. Therefore, studies on a proper management of the inbound travelers are urgent. Methods: We collected a total of 4,733,414 inbound travelers and 174 COVID-19 diagnosed patients in Yunnan province from 21 January 2020 to 20 February 2020. Data on place of origin, travel history, age, and gender, as well as whether they had suspected clinical manifestations for inbound travelers in Yunnan were collected. The impact of inbound travelers on the local epidemic was analyzed with a collinear statistical analysis and the effect of the control measures on the epidemic was evaluated with a sophisticated modeling approach. Results: Of the 174 COVID-19 patients, 60.9% were not from Yunnan, and 76.4% had a history of travel in Hubei. The amount of new daily cases in Yunnan was significant correlated with the number of inbound travelers from Hubei and suspected cases among them. Using Susceptible-Exposed-Infectious-Recovered (SEIR) model analysis, we found that the prevention and control measures dropped the local R0 down to 1.07 in Yunnan province. Conclusions: Our preliminary analysis showed that the proper management of inbound travelers from outbreak areas has a significantly positive effect on the prevention and control of the virus. In the process of resettlement, some effective measures taken by Yunnan province may provide an important reference for preventing the renewed COVID-19 outbreak in other regions.
  16. Prognostic Implications of Dual Platelet Reactivity Testing in Acute Coronary Syndrome
    de Carvalho LP, Fong A, Troughton R, Yan BP, Chin CT, Poh SC, et al.
    Thromb. Haemost., 2018 02;118(2):415-426.
    PMID: 29443374 DOI: 10.1160/TH17-08-0564
    Studies on platelet reactivity (PR) testing commonly test PR only after percutaneous coronary intervention (PCI) has been performed. There are few data on pre- and post-PCI testing. Data on simultaneous testing of aspirin and adenosine diphosphate antagonist response are conflicting. We investigated the prognostic value of combined serial assessments of high on-aspirin PR (HASPR) and high on-adenosine diphosphate receptor antagonist PR (HADPR) in patients with acute coronary syndrome (ACS). HASPR and HADPR were assessed in 928 ACS patients before (initial test) and 24 hours after (final test) coronary angiography, with or without revascularization. Patients with HASPR on the initial test, compared with those without, had significantly higher intraprocedural thrombotic events (IPTE) (8.6 vs. 1.2%, p ≤ 0.001) and higher 30-day major adverse cardiovascular and cerebrovascular events (MACCE; 5.2 vs. 2.3%, p = 0.05), but not 12-month MACCE (13.0 vs. 15.1%, p = 0.50). Patients with initial HADPR, compared with those without, had significantly higher IPTE (4.4 vs. 0.9%, p = 0.004), but not 30-day (3.5 vs. 2.3%, p = 0.32) or 12-month MACCE (14.0 vs. 12.5%, p = 0.54). The c-statistic of the Global Registry of Acute Coronary Events (GRACE) score alone, GRACE score + ASPR test and GRACE score + ADPR test for discriminating 30-day MACCE was 0.649, 0.803 and 0.757, respectively. Final ADPR was associated with 30-day MACCE among patients with intermediate-to-high GRACE score (adjusted odds ratio [OR]: 4.50, 95% confidence interval [CI]: 1.14-17.66), but not low GRACE score (adjusted OR: 1.19, 95% CI: 0.13-10.79). In conclusion, both HASPR and HADPR predict ischaemic events in ACS. This predictive utility is time-dependent and risk-dependent.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links