This work explores bubble laser technology as an alternative to needles in injection systems for vaccination, cancer treatment, insulin delivery, and catheter hygiene. The technology leverages laser-induced microfiltration and bubble dynamics to create high-speed pneumatic jets that penetrate the skin without needles, addressing discomfort, infection risk, and needle-related concerns. The system's performance is analyzed based on laser wavelength, pulse duration, and Gaussian beam droplet size. The findings indicate a significant increase in spot size at 1064 nm compared with 400 nm, consistent with the diffraction theory. Induced bubble dynamics reveal bubble generation, jetting, and fluid interactions as the Weber number increases, as well as jet velocity and fluid inertia. For femtosecond pulses, increasing the pulse duration from 100 to 1500 fs reduces the bubble lifespan from 0.8 to 0.3 arbitrary units, and the collapse pressure decreases from 2.1 to 0.4 bar. For picosecond pulses, the bubble lifetime decreases from 0.9 to 0.5 arbitrary units, and the pressure drop decreases from 2.0 to 0.4 bar as the pulse length extends from 2000 to 8000 ps. Jet formation in laser jet injection systems is enhanced by short pulses in water that produce longer-lasting bubbles. Drug delivery based on the Rayleigh-Plesset equation is characterized by a low-pressure collapse and short bubble lifetime. Thus, this relationship suggests that bubble laser technology can provide a more controlled and safer method of needle-free procedures, increasing compliance and reducing tissue trauma.
This study successfully synthesized high-performance photodetectors based on Ag-WO3 core-shell heterostructures using a simple and economical two-step pulsed laser ablation in water method and has investigated the electrical characteristics of the Ag@WO3 nanocomposite heterojunction. The Hall effect tests indicate that the synthesized Ag@WO3 exhibits n-type conduction with a Hall mobility of 1.25 × 103 cm2V-1S-1. Dark current-voltage properties indicated that the created heterojunctions displayed rectification capabilities, with the highest rectification factor of around 1.71 seen at a 5 V bias. A photodetector's responsivity reveals the existence of two response peaks, which are situated in the ultraviolet and visible region. The photodetector demonstrates a rapid response time of less than 100 ms. The detectivity values for wavelengths of 350 nm and 490 nm were 35 × 1013 Jones and 28 × 1013 Jones, respectively. The n-Ag-WO3/n-Si photodetector achieved a maximum EQE of 11.5% in the ultraviolet wavelength when subjected to 3 V and illuminated with 350 nm (26 mW/cm2) light. The devices demonstrate rapid switching behavior with a rise time of 0.32 s and a fall time of 0.33 s. The time-dependent light response of a photodetector under illumination at 26 mW/cm2 is seen at a bias of 3 V. The light exhibits a rise and decay duration of 15 s, while the photocurrent gain is measured at 9µA. The photocurrent of devices exhibited a positive correlation with the incoming light intensity, suggesting that the junction has the potential to function as a photo detector.