Displaying publications 1 - 20 of 308 in total

Abstract:
Sort:
  1. Rahmandoust M, Ochsner A
    J Nanosci Nanotechnol, 2012 Oct;12(10):8129-36.
    PMID: 23421189
    In this study, Single-Walled and Multi-Walled Carbon Nanotubes in their perfect forms were investigated by the Finite Element Method. Details on the modeling of the structure are provided in this paper, including the appropriate elements, the element properties that should be defined based on the atomic structure of Carbon Nanotubes and the corresponding chemical bonds. Non-covalent van der Waals interactions between two neighbor atoms as well as the required approximations for the modeling of the structures with this kind of interaction are also presented. Specific attention was dedicated to the necessity of using some time- and energy-consuming steps in the simulation process. First, the effect of simulating only a single ring of the whole structure is studied to find out if it would represent the same mechanical behavior as the long structure. Results show that by applying an appropriate set of boundary conditions, the stiffness of the shortened structure is practically equal to the long perfect structure. Furthermore, Multi-Walled Carbon Nanotube structures with and without defining the van der Waals force are studied. Based on the observations, applying the van der Waals force does not significantly influence the obtained Young's modulus of the structure in the case of a uniaxial tensile test.
  2. Kalckert A, Ehrsson HH
    Front Psychol, 2017;8:344.
    PMID: 28344566 DOI: 10.3389/fpsyg.2017.00344
    The rubber hand illusion (RHI) is a perceptual illusion whereby a model hand is perceived as part of one's own body. This illusion has been extensively studied, but little is known about the temporal evolution of this perceptual phenomenon, i.e., how long it takes until participants start to experience ownership over the model hand. In the present study, we investigated a version of the rubber hand experiment based on finger movements and measured the average onset time in active and passive movement conditions. This comparison enabled us to further explore the possible role of intentions and motor control processes that are only present in the active movement condition. The results from a large group of healthy participants (n = 117) showed that the illusion of ownership took approximately 23 s to emerge (active: 22.8; passive: 23.2). The 90th percentile occurs in both conditions within approximately 50 s (active: 50; passive: 50.6); therefore, most participants experience the illusion within the first minute. We found indirect evidence of a facilitatory effect of active movements compared to passive movements, and we discuss these results in the context of our current understanding of the processes underlying the moving RHI.
  3. Schmidt-Rhaesa A, Karraker NE
    Zootaxa, 2017 Mar 05;4238(3):395-405.
    PMID: 28603263 DOI: 10.11646/zootaxa.4238.3.6
    We report here for the first time horsehair worms (Nematomorpha) from Hong Kong (China). Most specimens belong to the genus Chordodes, and can be assigned to C. bipilus, C. caledoniensis and to C. cf. moutoni. Two specimens have a cuticular pattern resembling the South American species C. peraccae or C. bouvieri, but for Southeast Asia this pattern is new. These two specimens are reported here as Chordodes sp. Additionally, Gordionus chinensis was found. One new species, Acutogordius koljai, is described from Malaysia. It has a characteristically-structured region posterior to the postcloacal crescent which sets it apart from previously described species in this genus.
  4. Kadir MR, Syahrom A, Ochsner A
    Med Biol Eng Comput, 2010 May;48(5):497-505.
    PMID: 20224954 DOI: 10.1007/s11517-010-0593-2
    Human bones can be categorised into one of two types--the compact cortical and the porous cancellous. Whilst the cortical is a solid structure macroscopically, the structure of cancellous bone is highly complex with plate-like and strut-like structures of various sizes and shapes depending on the anatomical site. Reconstructing the actual structure of cancellous bone for defect filling is highly unfeasible. However, the complex structure can be simplified into an idealised structure with similar properties. In this study, two idealised architectures were developed based on morphological indices of cancellous bone: the tetrakaidecahedral and the prismatic. The two architectures were further subdivided into two types of microstructure, the first consists of struts only and the second consists of a combination of plates and struts. The microstructures were transformed into finite element models and displacement boundary condition was applied to all four idealised cancellous models with periodic boundary conditions. Eight unit cells extracted from the actual cancellous bone obtained from micro-computed tomography were also analysed with the same boundary conditions. Young's modulus values were calculated and comparison was made between the idealised and real cancellous structures. Results showed that all models with a combination of plates and struts have higher rigidity compared to the one with struts only. Values of Young's modulus from eight unit cells of cancellous bone varied from 42 to 479 MPa with an average of 234 MPa. The prismatic architecture with plates and rods closely resemble the average stiffness of a unit cell of cancellous bone.
  5. Deeleman-Reinhold CL, Miller J, Floren A
    Zookeys, 2016.
    PMID: 26877691 DOI: 10.3897/zookeys.556.6174
    Depreissia is a little known genus comprising two hymenopteran-mimicking species, one found in Central Africa and one in the north of Borneo. The male of Depreissia decipiens is redescribed, the female is described for the first time. The carapace is elongated, dorsally flattened and rhombus-shaped, the rear of the thorax laterally depressed and transformed, with a pair of deep pits; the pedicel is almost as long as the abdomen. The male palp is unusual, characterized by the transverse deeply split membranous tegulum separating a ventral part which bears a sclerotized tegular apophysis and a large dagger-like retrodirected median apophysis. The female epigyne consists of one pair of large adjacent spermathecae and very long copulatory ducts arising posteriorly and rising laterally alongside the spermathecae continuing in several vertical and horizontal coils over the anterior surface. Relationships within the Salticidae are discussed and an affinity with the Cocalodinae is suggested. Arguments are provided for a hypothesis that Depreissia decipiens is not ant-mimicking as was previously believed, but is a mimic of polistinine wasps. The species was found in the canopy in the Kinabalu area only, in primary and old secondary rainforest at 200-700 m.a.s.l. Overlap of canopy-dwelling spider species with those in the understorey are discussed and examples of species richness and endemism in the canopy are highlighted. Canopy fogging is a very efficient method of collecting for most arthropods. The canopy fauna adds an extra dimension to the known biodiversity of the tropical rainforest. In southeast Asia, canopy research has been neglected, inhibiting evaluation of comparative results of this canopy project with that from other regions. More use of fogging as a collecting method would greatly improve insight into the actual species richness and species distribution in general.
  6. Schmidt-Rhaesa A, Limatemjen L, Yadav AK
    Zootaxa, 2015;3925(1):202-10.
    PMID: 25781739 DOI: 10.11646/zootaxa.3925.2.3
    The currently known diversity of horsehair worms (Nematomorpha) from India is only 17 species. We report here two female specimens found on two occasions on a terrace paddy field in Tsupo, Viswema, Kohima, Nagaland, India. Although found at the same location, both species differ in their cuticular structures. One is determined as Chordodes moutoni, a species known from China, Malaysia and India. The other specimen shows a new type of cuticular structure, the areoles, which combines characters of both simple areoles and tubercle areoles. This specimen is described as a new species, C. combiareolatus. Both specimens show arrangements on the cuticle, in which a circle of areoles surrounds a region of "naked" cuticle. We interpret these regions as artifacts caused by the breaking off of the central crowned areoles, leaving only the circumcluster areoles behind.
  7. Huth A, Drechsler M, Köhler P
    J Environ Manage, 2004 Jul;71(4):321-33.
    PMID: 15217720
    Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.
  8. Wee SL, Tan SB, Jürgens A
    Phytochemistry, 2018 Sep;153:120-128.
    PMID: 29906658 DOI: 10.1016/j.phytochem.2018.06.005
    The plants of the enigmatic genus Rafflesia are well known for their gigantic flowers and their floral features such as pungent floral scent and vivid dark color, which mimics the food/brood sites of carrion. However, information on the pollination biology of this plant group remains limited and mostly anecdotal. In the present paper, we studied the floral volatiles of R. cantleyi Solms-Laubach and their role in pollinator attraction. To achieve these aims, the floral scent was collected in situ in the field using a dynamic headspace method followed by chemical analysis via GC-MS. The olfactory preferences of pollinators to the identified chemical compounds, were tested singly and in blends, in flight tunnel bioassays and compared with responses to headspace floral extracts. In addition, flower-visiting calliphorid flies and the local carrion fly community were sampled and identified. Five species of calliphorid flies (subfamilies of Chrysomyinae and Calliphorinae), all females, were found on the flowers, whereas nine species were found in the traps that were baited with tainted meat in the surrounding habitat. However, only flower visitors of one blow fly species, Chrysomya chani Kurahashi, were observed to carry R. cantleyi pollen after visiting male flowers. The floral volatiles emitted by male flowers in full bloom were dominated by two sulphur-containing compounds, dimethyl disulfide (DMDS) and dimethyl trisulfide (DMTS). These were accompanied by other minor compounds such as benzenoids (4), monoterpenoids (4), trace amounts of aliphatic compounds (1), and sesquiterpenes (1). In flight-tunnel bioassays, a female-specific positive response of C. chani flies to individual DMDS, DMTS, and a blend of DMDS and DMTS was evident. Our findings suggest that R. cantleyi biochemically mimics carrion and that relative ratio of oligosulfides in the floral scent play a key role in sex-biased pollinator specialization, attracting only female C. chani carrion flies to the flowers.
  9. Kalckert A, Bico I, Fong JX
    Perception, 2019 May;48(5):447-455.
    PMID: 30939992 DOI: 10.1177/0301006619839286
    The rubber hand illusion is a perceptual illusion of perceiving an object like a model hand as part of the own body. The question whether the illusion can be induced with noncorporal objects that do not look like a human body part is not perfectly resolved yet. In this study, we directly assessed the subjective experience of two different components within the illusion (i.e., ownership and referral of touch) when a model hand and a balloon are stimulated. We observed significantly stronger illusion ratings for the hand as compared with the balloon, and only the hand ratings showed a clear affirmation of the illusion. We further conclude that (a) a significant difference between synchronous and asynchronous conditions may not be sufficient to argue for the successful induction of the illusion and (b) the subcomponents show a different pattern in the different conditions, which may lead to alternative interpretations. These observations call for a more fine-grained interpretation of questionnaire data in rubber hand illusion studies.
  10. Choon SE, Navarini AA, Pinter A
    Am J Clin Dermatol, 2022 Jan;23(Suppl 1):21-29.
    PMID: 35061227 DOI: 10.1007/s40257-021-00654-z
    Generalized pustular psoriasis (GPP) is a rare, potentially life-threatening disease characterized by episodes of widespread sterile macroscopic pustules, with or without systemic inflammation and/or plaque psoriasis. Multiple GPP subtypes have been described, from acute GPP of von Zumbusch to milder, annular pustular psoriasis. Generalized pustular psoriasis mainly affects adults, with a female preponderance, but juvenile GPP also occurs. Flares are a hallmark of GPP and may occur de novo or be provoked by triggers, including withdrawal of systemic corticosteroids, infections, stress, pregnancy, and menstruation. Severity of flares varies widely between patients, and between flares in an individual patient. Significant flares are often accompanied by systemic symptoms, notably fever, general malaise, and extracutaneous manifestations such as arthritis, uveitis, and neutrophilic cholangitis. Common laboratory abnormalities include neutrophilia, elevated C-reactive protein levels, hypocalcemia, and abnormal liver function tests. The clinical course of GPP is highly variable; it can be a relapsing disease with recurrent flares and no pustulation between flares or a persistent disease with perpetual mild pustulation punctuated with flares of greater severity. Patients may have multiple flares per year or a flare every few years. Most flares last 2-5 weeks and approximately 50% require hospitalization. Life-threatening complications include sepsis and renal, hepatic, respiratory, and heart failure. Reported mortality rates are 2-16%.
  11. Abd Kadir E, Uchegbu IF, Schätzlein AG
    Int J Pharm, 2023 Jun 10;640:123036.
    PMID: 37169106 DOI: 10.1016/j.ijpharm.2023.123036
    Disulfiram (DS) is an anti-alcoholism drug capable of acting against important and hard-to-treat cancers. The drug's relative instability and variable absorption/distribution have led to its variable pharmacokinetics and suboptimal exposure. Hence, it was hypothesised that a nano-enabled form of DS might be able to overcome such limitations. Encapsulation of the labile DS was achieved with quaternary ammonium palmitoyl glycol chitosan (GCPQ) to form a high-capacity, soybean oil-based DS-GCPQ nanoemulsion. DS-GCPQ showed capability of oil-loading up to 50% v/v for a stable entrapment of high drug content. With increasing oil content (10 to 50% v/v), the mean particle size and polydispersity index were also increased (166 to 351 nm and 0.14 to 0.22, respectively) for a given amount of GCPQ. Formulations showed a highly positive particle surface charge (50.9 ± 1.3 mV), contributing to the colloidal stability of the individual particles. DS-GCPQ showed marked cytotoxicity against pancreatic cancer cell lines with enhanced activity in the presence of copper. An intravenous pharmacokinetic study of DS-GCPQ in vivo showed improved plasma drug stability with a DS half-life of 17 min. Prolonged survival was seen in tumour-bearing animals treated with DS-GCPQ supplemented with copper. In conclusion, DS-GCPQ nanoemulsion has the potential to be developed further for cancer therapeutic purposes.
  12. Romzi Ationg, Mohd. Sohaimi Esa, Mohd Azri Ibrahim, Jualang Azlan Gansau, Andreas Totu, Irma Wani Othman
    MyJurnal
    This paper presents an analysis on the resurgence of multiethnic political ideology in Sabah through the slogan of ‘Sabah for Sabahan’. It is found that after several decades of dealing with racial issues, Sabah is increasingly understanding the fact that politicizing ethnic differences will only lead to destruction. This situation was found to be an effect on the use of the slogan "Sabah for Sabahan". Therefore, the slogan should be considered as one of the important factors in the process of development or the resurgence of multi-ethnic political ideology in Sabah. In other words, this paper has shown that changes in political characteristics in a society characterized by diversity can be done through the creation and widespread use of specific political slogans that are very significant with the current needs and needs of the population in an administrative unit such as village, city and country
  13. Niedballa J, Sollmann R, bin Mohamed A, Bender J, Wilting A
    Sci Rep, 2015;5:17041.
    PMID: 26596779 DOI: 10.1038/srep17041
    In species-habitat association studies, both the type and spatial scale of habitat covariates need to match the ecology of the focal species. We assessed the potential of high-resolution satellite imagery for generating habitat covariates using camera-trapping data from Sabah, Malaysian Borneo, within an occupancy framework. We tested the predictive power of covariates generated from satellite imagery at different resolutions and extents (focal patch sizes, 10-500 m around sample points) on estimates of occupancy patterns of six small to medium sized mammal species/species groups. High-resolution land cover information had considerably more model support for small, patchily distributed habitat features, whereas it had no advantage for large, homogeneous habitat features. A comparison of different focal patch sizes including remote sensing data and an in-situ measure showed that patches with a 50-m radius had most support for the target species. Thus, high-resolution satellite imagery proved to be particularly useful in heterogeneous landscapes, and can be used as a surrogate for certain in-situ measures, reducing field effort in logistically challenging environments. Additionally, remote sensed data provide more flexibility in defining appropriate spatial scales, which we show to impact estimates of wildlife-habitat associations.
  14. Bajuri MN, Kadir MR, Amin IM, Ochsner A
    Proc Inst Mech Eng H, 2012 Jul;226(7):510-20.
    PMID: 22913098 DOI: 10.1177/0954411912445846
    The wrist is the most complex joint for virtual three-dimensional simulations, and the complexity is even more pronounced when dealing with skeletal disorders of the joint such, as rheumatoid arthritis (RA). In order to analyse the biomechanical difference between healthy and diseased joints, three-dimensional models of these two wrist conditions were developed from computed tomography images. These images consist of eight carpal bones, five metacarpal bones, the distal radius and ulna. The cartilages were developed based on the shape of the available articulations and ligaments were simulated via mechanical links. The RA model was developed accurately by simulating all ten common criteria of the disease related to the wrist. Results from the finite element (FE) analyses showed that the RA model produced three times higher contact pressure at the articulations compared to the healthy model. Normal physiological load transfer also changed from predominantly through the radial side to an increased load transfer approximately 5% towards the ulnar. Based on an extensive literature search, this is the first ever reported work that simulates the pathological conditions of the rheumatoid arthritis of the wrist joint.
  15. Syahrom A, Abdul Kadir MR, Abdullah J, Öchsner A
    Med Biol Eng Comput, 2011 Dec;49(12):1393-403.
    PMID: 21947767 DOI: 10.1007/s11517-011-0833-0
    The relationship between microarchitecture to the failure mechanism and mechanical properties can be assessed through experimental and computational methods. In this study, both methods were utilised using bovine cadavers. Twenty four samples of cancellous bone were extracted from fresh bovine and the samples were cleaned from excessive marrow. Uniaxial compression testing was performed with displacement control. After mechanical testing, each specimen was ashed in a furnace. Four of the samples were exemplarily scanned using micro-computed tomography (μCT) and three dimensional models of the cancellous bones were reconstructed for finite element simulation. The mechanical properties and the failure modes obtained from numerical simulations were then compared to the experiments. Correlations between microarchitectural parameters to the mechanical properties and failure modes were then made. The Young's modulus correlates well with the bone volume fraction with R² = 0.615 and P value 0.013. Three different types of failure modes of cancellous bone were observed: oblique fracture (21.7%), perpendicular global fracture (47.8%), and scattered localised fracture (30.4%). However, no correlations were found between the failure modes to the morphological parameters. The percentage of error between computer predictions and the actual experimental test was from 6 to 12%. These mechanical properties and information on failure modes can be used for the development of synthetic cancellous bone.
  16. Tai CW, Gibbons K, Schibler A, Schlapbach LJ, Raman S
    J Nephrol, 2021 Jun 02.
    PMID: 34076880 DOI: 10.1007/s40620-021-01071-5
    BACKGROUND: Acute kidney injury (AKI) is a major cause of morbidity and mortality in critically ill children. The aim of this paper was to describe the prevalence and course of AKI in critically ill children and to compare different AKI classification criteria.

    METHODS: We conducted a retrospective observational study in our multi-disciplinary Pediatric Intensive Care Unit (ICU) from January 2015 to December 2018. All patients from birth to 16 years of age who were admitted to the pediatric ICU were included. The Kidney Disease Improving Global Outcomes (KDIGO) definition was considered as the reference standard. We compared the incidence data assessed by KDIGO, pediatric risk, injury, failure, loss of kidney function and end- stage renal disease (pRIFLE) and pediatric reference change value optimised for AKI (pROCK).

    RESULTS: Out of 7505 patients, 9.2% developed AKI by KDIGO criteria. The majority (59.8%) presented with stage 1 AKI. Recovery from AKI was observed in 70.4% of patients within 7 days from diagnosis. Both pRIFLE and pROCK were less sensitive compared to KDIGO criteria for the classification of AKI. Patients who met all three-KDIGO, pRIFLE and pROCK criteria had a high mortality rate (35.0%).

    CONCLUSION: Close to one in ten patients admitted to the pediatric ICU met AKI criteria according to KDIGO. In about 30% of patients, AKI persisted beyond 7 days. Follow-up of patients with persistent kidney function reduction at hospital discharge is needed to reveal the long-term morbidity due to AKI in the pediatric ICU.

Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links