The ultimate goal of treatment of glottic malignancy is eradication of the cancer and preservation of maximum function. Ideally this would mean return of normal speech, respiration and deglutition. The foundation of vertical partial laryngectomy (VPL) is based on the knowledge of laryngeal anatomy and an understanding of how cancers invade the larynx. The VPL surgery of the glottic cancer is based on oncological sound principles, which will be further disscussed in this article. For the purpose of description we briefly presented 3 of our cases that underwent vertical partial laryngectomy for glottic cancer.
This study was carried out to improve the nutritional value of goat’s milk dadih by the addition of tropical-fruit purees, namely, jackfruit (Artocarpus heterophyllus, Lam.), pineapple (Ananas comosus) and papaya (Carica papaya). Dadih with added fruits were compared with the control (without fruit puree) for physical, chemical and sensory attributes. The texture properties of the tropical- fruit dadih were significantly different (p< 0.05) from the control. Control dadih showed highest values for lightness and hue (p< 0.05) as compared to tropical- fruit dadih. The addition of tropical- fruit purees significantly increased (p< 0.05) the moisture, protein, ash and vitamin C contents of the fruit added dadih. There were no significant differences (p> 0.05) in the fat, carbohydrate, energy and total soluble solid contents. Sensory evaluations using a hedonic test showed that all dadih were acceptable. Overall, syneresis of the dadih increased with decreasing pH throughout storage at 4°C.
Polishing of dental ceramics has become an increasingly important procedure in restorative dentistry as allceramic restorations, which require post-cementation occlusal adjustment, are gaining in popularity. There are numerous studies in both dental and ceramic literature on polishing of dental ceramics and the effects of polishing on their mechanical properties. However, lack of standardization in polishing parameters, precludes comparison among these studies. A clear understanding is lacking of the relative roles and interdependence of handpiece speed, abrasive characteristic, and polishing load. This paper will discuss the mechanism of polishing and review the literature on polishing and its effect on the mechanical properties of ceramic restorations.
Intranasal haemangioma is quite rare. This tumor may be confused with other intranasal vascular tumor such as juvenile nasopharyngeal angiofibroma (JNA), glomus tumors as well as other tumor such as angiosarcoma and leiomyoma. Juvenile nasopharyngeal angiofibroma is the most common vascular tumor encountered in nasal cavity. A definitive histology diagnosis pre-operatively is difficult to be obtained as the biopsy may lead into severe uncontrolled bleeding. The final diagnosis very much depends on histology after the tumor excision. Complete surgical resection of the tumor is the standard approach. In this report we describe our surgical management in approaching intranasal haemangioma endoscopically and this pathology can be considered as one of differential diagnosis for unilateral nasal mass.
This research was conducted to evaluate the effects of supplementation of jackfruit puree on probiotic (Lactobacillus acidophilus FTDC 1295) in terms of cell count, viability and nutritional value of dadih. Four samples of dadih were prepared in this investigation; Control, Jackfruit dadih, Probiotic dadih and Jackfruit Probiotic dadih (Control, ConJD, ConPD and JPD respectively). Results revealed that dadih supplemented with jackfruit puree (JPD) directly improved the probiotic cell counts which are significantly higher than the dadih without jackfruit puree (ConPD). The high probiotic viability in dadih (ConPD 92%; JPD 96%) indicated that it can be an effective probiotic delivery vehicle. The chemical compositions (moisture, total solids, fat, protein, mineral, organic acid, and pH) showed variations in its pattern due to the differential in formulations and the incorporations of probiotic bacteria. In addition, the Total Phenolic Content and the antioxidant capacity were reported to be the highest in dadih supplemented with jackfruit puree and probiotic (JPD) as compared with other dadih samples. These are attributed by the presence of jackfruit puree and probiotic in the samples which effectively increased the total phenolic content which directly increase the antioxidant activity
The main objective of this study was to assess knowledge on tooth bleaching among patients visiting dental health care centres in Klang Valley. A total of 200 patients were conveniently selected and interviewed using structured questionnaires. Among the 200 respondents, 75.5% knew about bleaching. There was no statistically significant difference in knowledge of bleaching in relation to age, gender, ethnic group and income level of the patients interviewed (p>0.05) but the education level had a significant influence (p=0.049). Respondents with tertiary education had better knowledge about tooth bleaching as compared to those respondents without tertiary education. The sources of information about bleaching came from advertisements on electronic media (65.5%), articles in newspapers and magazines (14.7%), dentists (10.9%) and family and friends (8.8%). Out of the 75.5% of respondents who knew about bleaching, 18.2% had tried bleaching their teeth using either over-the-counter products or had undergone professional bleaching treatment. The commonest reasons cited for bleaching treatment were to remove coffee and tea stains (70%) and cigarette stains (16.7%). 73.3% of these patients were satisfied with the results achieved after bleaching. However, the majority of these patients (59.6%) were unsure of the safety of these bleaching products/procedures. In conclusion, 75.5% of patients interviewed in this study knew that bleaching is one of the treatment options available to improve dental aesthetics but only 18.2% have tried bleaching their teeth. Their main source of knowledge about bleaching came from advertisements on electronic media.
Crowdsourcing introduces new perspectives in innovation, allowing for new products and services to shift away from the traditional manufacture-centric model to a more user-centric one. In order for businesses to reap the benefits of open innovation, it is necessary to understand the factors that motivate ideators to contribute valuable ideas. Equally, there is an urgency to identify the challenges faced by ideators in crowdsourcing for open innovation to retain the participants of crowdsourcing communities. This paper presents a structured review to address the aforementioned issues. Our findings reveal that the intrinsic factors that drive participation in open innovation are related to the learning experience that results from sharing ideas. Extrinsic factors like social motivation are frequently mentioned in different studies. This study also highlights the need for organisations to develop strategies for interacting with their contributors in order to sustain their participation and idea contribution. In conclusion, this paper can serve as a guideline for practitioners to improve crowdsourcing platforms with the inclusion of important motivational features. It can also serve as reference for organisations for formulating policies to regulate idea contribution.
Crowdsourcing is an initiative implemented by the Malaysian government to support its National Key Result Area (NKRA) agenda to improve the lives of citizens with low household income in the B40 group. Crowdsourcing activities are done on mobile crowdsourcing platforms that enable workers to perform micro tasks at any time for a fixed payment. However, without active and constant participation from the crowd, this initiative might not be successful. This paper describes a preliminary study in identifying motivation factors for participating in mobile crowdsourcing platforms. This study identified intrinsic and extrinsic motivation factors that can attract crowds to participate in mobile crowdsourcing platforms. Technology efficacy factors that interlink with motivation factors were also identified in this study. The preliminary study employed the qualitative method where in-depth interviews were conducted among 30 crowdsourcing participants in Peninsular Malaysia. The findings of this study are the basis for a motivation model that can attract crowdworkers from among the B40 group of household-income earners to participate in crowdsourcing to procure and perform available micro-tasks. The findings will also help improvise mobile platforms for crowdsourcing.
Burgers were prepared using duck surimi-like material (DSLM) with polydextrose added (SL) and DSLM with sucrose-sorbitol added (SS), and the properties of these burgers were compared with those of burgers made of chicken meat (CB) and duck meat (DB). Quality characteristics such as chemical composition, cooking loss, diameter shrinkage, color, and texture were measured. The DB had a lower moisture content (55.58%) and higher fat content (21.44%) and cooking loss (11.01%) compared with other samples, whereas CB, SS, and SL did not differ significantly in moisture (65.21-66.10%) and fat (10.42-11.16%) content or cooking loss (5.32-6.15%). The SS and SL were positioned below CB and above DB in terms of hardness, chewiness, and springiness. Ten trained panelists assessed the burgers using quantitative descriptive analysis. Among the burgers, CB had the greatest brightness of color, hardness, springiness, and chewiness. The SS had greater sweetness than the other burgers. Both SL and SS had significantly less animalic odor, meaty flavor, oiliness, juiciness, and saltiness compared with DB. The physicochemical and sensory characteristics of burgers prepared from DSLM approached those of burgers made of chicken.
In this study, the effect of the addition of different cryoprotectants on the freeze-thaw stability of duck surimi-like material (DSLM) was tested. A 6% (wt/wt) low-sweetness cryoprotectant (i.e., polydextrose, trehalose, lactitol, or palatinit) was added to a 3-kg portion of DSLM, and the mixture was subjected to freeze-thaw cycles during 4 mo of frozen storage. The DSLM with no cryoprotectant added (control) and with a 6% sucrose-sorbitol blend (high-sweetness cryoprotectant) added also were tested. The polydextrose-added sample had the highest water-holding capacity among the sample types tested (P < 0.05), and it retained its higher value during frozen storage. The protein solubility of the cryoprotectant-added samples decreased significantly (P < 0.05) from 58.99 to 59.60% at initial frozen storage (0 mo) to 48.60 to 54.61% at the end of the experiment (4 mo). The gel breaking force of all samples significantly decreased (P < 0.05) at 1 mo; this breaking force then stabilized after further frozen storage for the cryoprotectant-added samples, whereas it continued to decrease in the control samples. Gel deformation fluctuated during frozen storage and was significantly lower (P < 0.05) at the end of experiment than at the beginning. The presence of cryoprotectants reduced the whiteness of DSLM. Samples containing polydextrose, trehalose, lactitol, and palatinit were able to retain the protein solubility, gel breaking force, and deformation of DSLM better than control samples after 4 mo of frozen storage and exposure to freeze-thaw cycles. The effects of these low-sweetness cryoprotectants are comparable to those of sucrose-sorbitol, thus, these sugars could be used as alternatives in protecting surimi-like materials during frozen storage.
The gelation properties of spent duck meat surimi-like material produced using acid solubilization (ACS) or alkaline solubilization (ALS) were studied and compared with conventionally processed (CON) surimi-like material. The ACS process yielded the highest protein recovery (P < 0.05). The ALS process generated the highest lipid reduction, and the CON process yielded the lowest reduction (P < 0.05). Surimi-like material produced by the CON process had the highest gel strength, salt extractable protein (SEP), and water holding capacity (WHC), followed by materials produced via the ALS and ACS processes and untreated duck meat (P < 0.05). The material produced by the CON process also had the highest cohesiveness, hardness, and gumminess values and the lowest springiness value. Material produced by the ACS and ALS processes had higher whiteness values than untreated duck meat gels and gels produced by the CON method (P < 0.05). Surimi-like material produced using the ACS and CON processes had significantly higher myoglobin removal (P < 0.05) than that produced by the ALS method and untreated duck meat. Among all surimi-like materials, the highest Ca(2+)-ATPase activity was found in conventionally produced gels (P < 0.05). This suggests that protein oxidation was induced by acid-alkaline solubilization. The gels produced by ALS had a significantly lower (P < 0.05) total SH content than the other samples. This result showed that the acid-alkaline solubilization clearly improved gelation and color properties of spent duck and possibly applied for other high fat raw material.
The physicochemical properties and sensory analysis of duck meatballs containing duck meat surimi-like material during frozen storage were evaluated. Properties of meatballs containing duck surimi-like material prepared by acid solubilization (ACDS), alkaline solubilization (ALDS), and conventional processing (CDS) as well as duck mince (as the control, CON) were compared. ACDS had significantly higher (P < 0.05) moisture and protein content and lower fat content compared with CON. The thiobarbituric acid-reactive substances (TBARS) value of all samples increased as the storage time increased up to week 8 (P < 0.05), but thereafter it decreased in most of the samples. ACDS and ALDS had significantly higher TBARS values (P < 0.05), and these values remained higher than those of the other samples throughout the frozen storage period. Addition of surimi-like material to the meatballs had significant effects (P < 0.05) on springiness, gumminess, and chewiness values of all samples. Ingredients and frozen storage affected most sensory attributes in samples significantly (P<0.05). No significant increase in growth of organisms occurred during 12-wk frozen storage The results indicate that acid-alkaline solubilization methods improve both physicochemical and sensory properties of duck meatballs containing duck surimi-like material. Thus, these techniques should be applicable to product development of duck surimi-like material.
Currently, of less than 50 cases of head and neck follicular dendritic cell (FDC) sarcoma reported in the literature, 5 have been found to occur in the background of Castleman disease. We report another case of head and neck FDC sarcoma with emphasise on its associated lesions and review the outcome of treatment from the existing cases in the literature.
Many children have benefited from cochlear implant device including those with congenital malformation of the inner ear. The results reported in children with malformed cochlea are very encouraging. We describe 2 cases of Mondini's malformation with severe sensorineural hearing loss. Cochlear implantation was performed and both of them underwent post-implantation speech rehabilitation. Post-implantation, both of them were noted to respond to external sound. But the second case developed facial twitching a few months after the device was switched on. It is important to evaluate the severity of the inner ear deformity and the other associated anomalies in pre-implantation radiological assessment in order to identify the problem that may complicate the surgery and subsequent patient management.
This study aims to investigate the bending effects on the flexible wearable antenna by using copper nanowires and polydimethylsiloxane (PDMS). This project focuses on the bending effect on the proposed wearable antenna in the presence of skin tissue and at free space. The radiation characteristics were simulated and analyzed when the antenna was under flat and bent conditions. The performance result of return loss and radiation pattern (Efield and H-field) of proposed wearable antenna was analyzed. The material for the proposed antenna is designed to be flexible and wearable for the application of body-centric wireless communication (BCWCs) at the frequency of 2.45 GHz with the approval specifications of industrial, scientific and medical (ISM) band. Radiator for the proposed wearable antenna is fabricated using copper nanowire, and the antenna substrate is by using polydimethylsiloxane (PDMS). The performance result of the proposed wearable antenna was simulated by using CST microwave studio. From the simulated result for different bending angles, a conclusion was drawn that bending of structure can improve the impedance matching and return loss during the bent condition. However, the resonant frequency tends to shift as the antenna is bent up to 50°. At the critical angle of 70°, the frequency is shifted to a lower frequency.
This article aims to narrate the various oral complications in individuals suffering from diabetes mellitus. Google search for "diabetes mellitus and oral complications" was done. The search was also carried out for "diabetes mellitus" and its oral complications individually. Diabetes mellitus is a chronic metabolic disorder that is a global epidemic and a common cause of morbidity and mortality in the world today. Currently, there are about 422 million cases of diabetes mellitus worldwide. Diabetic patients can develop different complications in the body such as retinopathy, neuropathy, nephropathy, cardiovascular disease. Complications in the oral cavity have been observed in individuals suffering from diabetes mellitus. A study noted that more than 90% of diabetic patients suffered from oral complications. Another research has shown a greater prevalence of oral mucosal disorders in patients with diabetes mellitus than non-diabetic population: 45-88% in patients with type 2 diabetes compared to 38.3-45% in non-diabetic subjects and 44.7% in type 1 diabetic individuals compared to 25% in the non-diabetic population. Oral complications in people with diabetes are periodontal disease, dental caries, oral infections, salivary dysfunction, taste dysfunction, delayed wound healing, tongue abnormalities, halitosis, and lichen planus. The high glucose level in saliva, poor neutrophil function, neuropathy, and small vessel damage contribute to oral complications in individuals with uncontrolled diabetes. Good oral health is imperative for healthy living. Oral complications cause deterioration to the quality of life in diabetic patients. Complications like periodontal disease having a bidirectional relationship with diabetes mellitus even contribute to increased blood glucose levels in people with diabetes. This article intends to promote awareness regarding the oral health of diabetics and to stress the importance of maintaining proper oral hygiene, taking preventive measures, early detection, and appropriate management of oral complications of these patients through a multidisciplinary approach.
The aim of this study was to assess the wear of tungsten carbide burs and round rotary diamond instruments through measurements of rake angle and visual observations respectively under a field emission scanning electron microscope. Sixty short and long head pear-shaped tungsten carbide burs and 18 round rotary diamond instruments that had been used to complete < 5, > 5 and > 10 cavity preparations (n=10/group) were selected from the 3rd and 4th year dental students, Faculty of Dentistry, University of Malaya. There were two control groups consisting of long and short tungsten carbide burs of ten each. Two-way ANOVA was used to analyse the rake angle data. The data from the two control groups were collectively analysed following multiple paired t-test (p>.05) which showed no significant difference between the two types of tungsten carbide bur (short and long head). The mean rake angle of the control group was significantly higher (p < .05) compared to the < 5, > 5 and > 10 cavity preparation groups. The rake angle of the > 10 cavity preparation group was significantly lower than the other two test groups (p < .05). Round rotary diamond instruments in the < 5 cavity preparation group showed intact diamond particles with distinct cutting facets comparable to the control group. However, diamonds instruments in the > 5 and > 10 cavity preparation groups showed blunt diamond particles. In conclusion, wear of tungsten carbide burs and round rotary diamond instruments were evident after repeated use. Wear was more pronounced when instruments were used to prepare more than ten cavities.
Orofacial clefts are one of the most common congenital malformations among newborns. The two main types of oral clefts are cleft lip with or without cleft (CLP) and cleft palate alone (CP). Cleft is an abnormal ssure in an anatomical structure that is normally fused. Cleft lip is the congenital failure of the maxillary and medial nasal processes to fuse, forming a ssure in the lip. Cleft palate is the congenital failure of the palate to fuse properly, forming a ssure in the roof of the mouth (Mossey, 2009).clefts are one of the most common congenital malformations among newborns. The two main types of oral clefts are cleft lip with or without cleft (CLP) and cleft palate alone (CP). Cleft is an abnormal ssure in an anatomical structure that is normally fused. Cleft lip is the congenital failure of the maxillary and medial nasal processes to fuse, forming a ssure in the lip. Cleft palate is the congenital failure of the palate to fuse properly, forming a ssure in the roof of the mouth (Mossey, 2009).
Patients with Wellen's syndrome often present with chest pain and found to have specific precordial T-wave changes on the electrocardiogram (ECG). They subsequently develop a large anterior wall myocardial infarction. These specific electrocardiographic abnormalities are associated with critical stenosis of the proximal left anterior descending coronary artery (LAD). This syndrome is often under-recognised and has fatal consequences; it is, therefore, also known as the widow maker. We highlight a case of a 39-year old gentleman who had a history of coronary artery disease and typical ECG characteristics of Wellen's syndrome.