This study examines the effect of nanoparticles with zinc oxides (ZnONPs) on diabetic nephropathy, which is the primary cause of mortality for diabetic patients with end-stage renal disease. Diabetes in adult male rats was induced via intraperitoneal injection of streptozotocin. ZnONPs were intraperitoneally administered to diabetic rats daily for 7 weeks. Diabetes was associated with increases in blood glucose level, 24-h urinary albumin excretion rate, glomerular basement membrane thickness, renal oxidative stress markers, and renal mRNA or protein expression of transforming growth factor-β1, fibronectin, collagen-IV, tumour necrosis factor-α and vascular endothelial growth factor-A. Moreover, the expression of nephrin and podocin, and the mRNA expression of matrix metalloproteinase-9 were decreased in the diabetic group. These changes were not detected in the control group and were significantly prevented by ZnONP treatment. These results provide evidence that ZnONPs ameliorate the renal damage induced in a diabetic rat model of nephropathy through improving renal functionality; inhibiting renal fibrosis, oxidative stress, inflammation and abnormal angiogenesis; and delaying the development of podocyte injury. The present findings may help design the clinical application of ZnONPs for protection against the development of diabetic nephropathy.
Freshwater quality criteria for iron (Fe), lead (Pb), nickel (Ni), and zinc (Zn) were developed with particular reference to aquatic biota in Malaysia, and based on USEPA's guidelines. Acute toxicity tests were performed on eight different freshwater domestic species in Malaysia which were Macrobrachium lanchesteri (prawn), two fish: Poecilia reticulata and Rasbora sumatrana, Melanoides tuberculata (snail), Stenocypris major (ostracod), Chironomus javanus (midge larvae), Nais elinguis (annelid), and Duttaphrynus melanostictus (tadpole) to determine 96 h LC(50) values for Fe, Pb, Ni, and Zn. The final acute value (FAV) for Fe, Pb, Ni, and Zn were 74.5, 17.0, 165, and 304.9 μg L(-1), respectively. Using an estimated acute-to-chronic ratio (ACR) of 8.3, the value for final chronic value (FCV) was derived. Based on FAV and FCV, a criterion maximum concentration (CMC) and a criterion continuous concentration (CCC) for Fe, Pb, Ni, and Zn that are 37.2, 8.5, 82.5, and 152.4 μg L(-1) and 9.0, 2.0, 19.9, and 36.7 μg L(-1), respectively, were derived. The results of this study provide useful data for deriving national or local water quality criteria for Fe, Pb, Ni, and Zn based on aquatic biota in Malaysia. Based on LC(50) values, this study indicated that N. elinguis, M. lanchesteri, N. elinguis, and R. sumatrana were the most sensitive to Fe, Pb, Ni, and Zn, respectively.
Globally, more than 800 million people are undernourished while >2 billion people have one or more chronic micronutrient deficiencies (MNDs). More than 6% of global mortality and morbidity burdens are associated with undernourishment and MNDs. Here we show that, in 2011, 3.5 and 1.1 billion people were at risk of calcium (Ca) and zinc (Zn) deficiency respectively due to inadequate dietary supply. The global mean dietary supply of Ca and Zn in 2011 was 684 ± 211 and 16 ± 3 mg capita(-1) d(-1) (± SD) respectively. Between 1992 and 2011, global risk of deficiency of Ca and Zn decreased from 76 to 51%, and 22 to 16%, respectively. Approximately 90% of those at risk of Ca and Zn deficiency in 2011 were in Africa and Asia. To our knowledge, these are the first global estimates of dietary Ca deficiency risks based on food supply. We conclude that continuing to reduce Ca and Zn deficiency risks through dietary diversification and food and agricultural interventions including fortification, crop breeding and use of micronutrient fertilisers will remain a significant challenge.
Dengue virus type 2 (DENV-2) infection induced apoptotic cellular DNA fragmentation in Vero cells within 8 days of infection. The addition of high concentrations of extracellular Zn(2+) but not Ca(2+), Mg(2+) or Mn(2+) to the cell culture medium hastened the detection of apoptosis to within 4 h after infection. No apoptotic cellular DNA fragmentation was detected in the cell culture treated with Zn(2+) alone or infected with heat- or ultraviolet light-inactivated DENV-2 in the presence of Zn(2+). These results suggest that (i) apoptosis is induced in African green monkey kidney cells infected with live DENV-2 and (ii) the addition of high extracellular Zn(2+) accelerates detection of apoptosis in the DENV-2-infected cells.
We report the seed/catalyst-free vertical growth of high-density electrodeposited ZnO nanostructures on a single-layer graphene. The absence of hexamethylenetetramine (HMTA) and heat has resulted in the formation of nanoflake-like ZnO structure. The results show that HMTA and heat are needed to promote the formation of hexagonal ZnO nanostructures. The applied current density plays important role in inducing the growth of ZnO on graphene as well as in controlling the shape, size, and density of ZnO nanostructures. High density of vertically aligned ZnO nanorods comparable to other methods was obtained. The quality of the ZnO nanostructures also depended strongly on the applied current density. The growth mechanism was proposed. According to the growth timing chart, the growth seems to involve two stages which are the formation of ZnO nucleation and the enhancement of the vertical growth of nanorods. ZnO/graphene hybrid structure provides several potential applications in electronics and optoelectronics such as photovoltaic devices, sensing devices, optical devices, and photodetectors.
Recently one dimensional (1-D) nanostructured metal-oxides have attracted much attention because of their potential applications in gas sensors. 1-D nanostructured metal-oxides provide high surface to volume ratio, while maintaining good chemical and thermal stabilities with minimal power consumption and low weight. In recent years, various processing routes have been developed for the synthesis of 1-D nanostructured metal-oxides such as hydrothermal, ultrasonic irradiation, electrospinning, anodization, sol-gel, molten-salt, carbothermal reduction, solid-state chemical reaction, thermal evaporation, vapor-phase transport, aerosol, RF sputtering, molecular beam epitaxy, chemical vapor deposition, gas-phase assisted nanocarving, UV lithography and dry plasma etching. A variety of sensor fabrication processing routes have also been developed. Depending on the materials, morphology and fabrication process the performance of the sensor towards a specific gas shows a varying degree of success. This article reviews and evaluates the performance of 1-D nanostructured metal-oxide gas sensors based on ZnO, SnO(2), TiO(2), In(2)O(3), WO(x), AgVO(3), CdO, MoO(3), CuO, TeO(2) and Fe(2)O(3). Advantages and disadvantages of each sensor are summarized, along with the associated sensing mechanism. Finally, the article concludes with some future directions of research.
A brief survey to assess the sensitivity and efficacy of some common etching reagents for revealing obliterated engraved marks on Al-Si alloy surfaces is presented. Experimental observations have recommended use of alternate swabbing of 10% NaOH and 10% HNO(3) on the obliterated surfaces for obtaining the desired results. The NaOH etchant responsible for bringing back the original marks resulted in the deposition of some dark coating that has masked the recovered marks. The coating had been well removed by dissolving it in HNO(3) containing 10-20% acid. However, the above etching procedure was not effective on aluminium (99% purity) and Al-Zn-Mg-Cu alloy surfaces. Also the two reagents (i) immersion in 10% aq. phosphoric acid and (ii) alternate swabbing of 60% HCl and 40% NaOH suggested earlier for high strength Al-Zn-Mg-Cu alloys [23] were quite ineffective on Al-Si alloys. Thus different aluminium alloys needed different etching treatments for successfully restoring the obliterated marks. Al-Si alloys used in casting find wide applications especially in the manufacture of engine blocks of motor vehicles. Hence, the results presented in this paper are of much relevance in serial number restoration problems involving this alloy.
Restoration of obliterated engraved marks on high strength Al-Zn-Mg-Cu alloy (AA7010) surfaces by etching technique was studied. The alloy surfaces were mechanically engraved with some identification marks using "Gravograph". The marks were then erased by removing the metal to different levels up to and below the depth of engraving. Five metallographic reagents were tested on the obliterated surfaces by etching. The following two methods (i) immersion in 10% aq. phosphoric acid and (ii) alternate swabbing of 60% HCl and 40% NaOH were found to be quite effective to reveal the obliterated marks. These two procedures were also able to show effectively the marks obliterated by over-engraving and centre punching. Of the two techniques immersion in phosphoric acid provided more contrast. Interestingly, alternate swabbing of 60% HCl and 40% NaOH presented itself to be the common reagent for restoration on pure aluminium as well as its alloy surfaces. This is evident from our own current experiments and those of earlier researchers [G. Peeler, S. Gutowski, H. Wrobel, G. Dower, The restoration of impressed characters on aluminium alloy motor cycle frames, J. Forensic Ident. 58 (1) (2008) 27-32; M. Izhar M. Baharum, R. Kuppuswamy, A.A. Rahman, Restoration of engraved marks on aluminium surfaces by etching technique, Forensic Sci. Int. 177 (2008) 221-227]. The findings have assumed importance as engines and chassis of cars and frames of firearms are currently made of high strength aluminium alloys and recovery on these surfaces by current methods is not satisfactory.
Neurogenesis involves cell proliferation, cell cycle arrest, differentiation, migration and the natural developmental death of the neural precursors. These processes are highly co-ordinated and governed by cell-cycle genes and neural transcription factors. Zn plays a crucial role as a functional and structural component of enzymes and transcription factors and components of the intracellular signaling pathway associated with the regulation of cell proliferation. The influence of additional Zn intake during pregnancy on the neuronal proliferation at ventricular zone of the developing fetus has been studied. Pups delivered by the group of mice provided with drinking water with 4.0 mM Zn supplement throughout pregnancy contained an increased number of proliferating neurons in the ventricular zone at P0 compared to those delivered by the mice provided with drinking water without any Zn supplement. This finding provides direct evidence to support the notion that maternal Zn levels influence the development of the nervous system of the offspring.
The trace elements copper, zinc, and selenium are important immune modulators and essential cofactors of the antioxidant enzymes. In the present study, the proliferative effect of human peripheral mononuclear cells (PBMCs) that have been exposed to copper, zinc, and selenium and the corresponding activities of antioxidant enzymes, namely superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase, were determined. Zinc and copper stimulated the PBMC proliferation in a dose-dependent manner within the dose range 25-200 micromol/L. SOD and GPx activities in PBMCs exposed to zinc were inhibited, whereas catalase activity was unaffected. All the three antioxidant enzymes in the cells exposed to copper were inhibited. Selenium exerted more potent inhibition of the cell proliferation while causing stimulation of the antioxidant enzymes at the lowest dose (25 micromol/L) than at the highest dose (200 micromol/L) tested. A significant negative correlation was observed between proliferation and antioxidant enzyme (SOD and GPx) activities in trace-element-exposed PBMC. The present findings substantiate the importance of trace elements as immune modulators and the involvement of enzymatic antioxidant system in the immune cell regulation.
A field remediation treatment was carried out to examine the long-term effect of biochar on the immobilisation of metals and the revegetation of a contaminated site in Castleford, UK. The extracted concentrations of nickel (Ni) (II) and zinc (Zn) (II) in the carbonic acid leaching tests were reduced by 83-98% over three years. The extracted Ni (II) and Zn (II) concentrations three years after the treatment were comparable to a cement-based treatment study carried out in a parallel manner on the same site. The sequential extraction results indicated that biochar addition (0.5-2%) increased the residue fractions of Ni (II) (from 51% to 61-66%) and Zn (II) (from 7% to 27-35%) in the soils through competitive sorption, which may have resulted in the reduction of leachabilities of Ni (II) (from 0.35% to 0.12-0.15%) and Zn (II) (from 0.12% to 0.01%) in the plots with biochar compared with that without biochar three years after the treatment. The germination of grass in the plots on site failed. Further laboratory pot study suggested that larger amounts of biochar (5% or more) and compost (5% or more) were needed for the success of revegetation on this site. This study suggests the effectiveness and potential of biochar application in immobilising heavy metals in contaminated site in the long term.
In this study, the selenium enriched peanuts and the different solubility proteins extracted from them were investigated. The dried defatted selenium enriched peanuts (SeP) powder (0.3147 μg/g) had a 2.5-fold higher mean total selenium concentration than general peanuts (GP) power (0.1233 μg/g). The SeP had higher concentration of selenium, manganese and zinc than that of GP, but less calcium. The rate of extraction of protein was 23.39% for peanuts and alkali soluble protein was the main component of protein in SeP, which accounted for 92.82% of total soluble protein and combined selenium was 77.33% of total selenium protein. In different forms of proteins from SeP, the WSePr due to higher concentration of selenium had higher DPPH free-radical scavenging activity, higher reducing activity and longer induction time than other proteins.
In the presence of guest 2,4'-bpy molecules or under acidic conditions, three compounds, [Cd(4,4'-bpy)(2)(H(2)O)(2)](ClO(4))(2).(2,4'-bpy)(2).H(2)O (1), [Zn(4,4'-bpy)(2)(H(2)O)(2)](ClO(4))(2).(2,4'-bpy)(2).H(2)O (2), and [Cu(4,4'-bpy)(2)(H(2)O)(2)](ClO(4))(4).(4,4'-H(2)bpy) (3), were obtained from the reactions of the metal salts and 4,4'-bpy in an EtOH-H(2)O mixture. 1 has a 2-D square-grid network structure, crystallizing in the monoclinic space group P2/n, with a = 13.231(3) Å, b = 11.669(2) Å, c = 15.019(3) Å, beta = 112.82(3) degrees, Z = 2; 2 is isomorphous with 1, crystallizing in the monoclinic space group P2/n, with a = 13.150(3) Å, b = 11.368(2) Å, c = 14.745(3) Å, beta = 110.60(3) degrees, Z = 2. The square grids superpose on each other into a channel structure, in which each layer consists of two pairs of shared edges, perfectly square-planar with an M(II) ion and a 4,4'-bpy at each corner and side, respectively. The square cavity has dimensions of 11.669(2) x 11.788(2) and 11.368(2) x 11.488(2) Å for 1 and 2, respectively. Every two guest 2,4'-bpy molecules are clathrated in each hydrophobic host cavity and are further stabilized by pi-pi stacking and hydrogen bonding interactions. The NMR spectra clearly confirm that both 1 and 2 contain 4,4'-bpy and 2,4'-bpy molecules in a 1:1 ratio, which have stacking interaction with each other in the solution. 3 crystallizes in the orthorhombic space group Ibam, with a = 11.1283(5) Å, b = 15.5927(8) Å, c = 22.3178(11) Å, Z = 4. 3 is made up of two-dimensional square [Cu(4)(4,4'-bpy)(4)] grids, where the square cavity has dimensions of 11.13 x 11.16 Å. Each [4,4'-H(2)bpy](2+) cation is clathrated in a square cavity and stacks with one pair of opposite edges of the host square cavity in an offset fashion with the face-to-face distance of ca. 3.95 Å. Within each cavity, the [4,4'-H(2)bpy](2+) cation forms twin three-center hydrogen bonds with two pairs of ClO(4)(-) anions. The results suggest that the guest 2,4'-bpy molecules and protonated [4,4'-H(2)bpy](2+) cations present in the reaction systems serve as structure-directing templates in the formation of the crystal structures and exclude self-inclusion of the networks having larger square cavities.
Observation of visible light trapping in zinc oxide (ZnO) nanorods (NRs) correlated to the optical and photoelectrochemical properties is reported. In this study, ZnO NR diameter and c-axis length respond primarily at two different regions, UV and visible light, respectively. ZnO NR diameter exhibits UV absorption where large ZnO NR diameter area increases light absorption ability leading to high efficient electron-hole pair separation. On the other hand, ZnO NR c-axis length has a dominant effect in visible light resulting from a multiphoton absorption mechanism due to light reflection and trapping behavior in the free space between adjacent ZnO NRs. Furthermore, oxygen vacancies and defects in ZnO NRs are associated with the broad visible emission band of different energy levels also highlighting the possibility of the multiphoton absorption mechanism. It is demonstrated that the minimum average of ZnO NR c-axis length must satisfy the linear regression model of Z p,min = 6.31d to initiate the multiphoton absorption mechanism under visible light. This work indicates the broadening of absorption spectrum from UV to visible light region by incorporating a controllable diameter and c-axis length on vertically aligned ZnO NRs, which is important in optimizing the design and functionality of electronic devices based on light absorption mechanism.
Photocatalytic fuel cell (PFC) is considered as a sustainable green technology which could degrade organic pollutant and generate electricity simultaneously. A synergistic double-sided ZnO/BaTiO3 loaded carbon plate heterojunction photoanode was fabricated in different ratios by using simple ultrasonication and mixed-annealed method. The double-sided design of photoanode allowed the lights irradiated at both sides of the photoanode. The ferroelectricity fabricated photoanode was applied in a membraneless PFC with platinum-loaded carbon as the cathode. Results revealed that the photoanode with 1:1 ratio of BaTiO3 and ZnO exhibited a superior photocatalytic activity among all the photoanodes prepared in this study. The heterojunction of this photoanode was able to achieve up to a removal efficiency of 93.67% with a maximum power density of 0.5284 μW cm-2 in 10 mg L-1 of Reactive Red 120 (RR120) without any supporting electrolyte. This photoanode was able to maintain at high performance after recycling 3 times. Overloading of ZnO above 50% on BaTiO3 could lead to deterioration of the performance of PFC due to the charge defects and light trapping ability. The interactions, interesting polarizations of the photocatalysts and proposed mechanism of the n-n type heterojunction in the photoanode of ZnO/BaTiO3 was also discussed.
The asymmetric unit of the title compound, 2[Zn(C32H16N8)(C7H9N)]·3C7H9N, comprises two independent complex mol-ecules and three benzyl-amine solvent mol-ecules. Each complex mol-ecule features a penta-coordinated Zn(2+) ion within a square-pyramidal geometry, whereby the N5 donor set is defined by four atoms of the phthalocyaninate dianion (PC) and an N-bound benzyl-amine mol-ecule; it is the relative orientations of the latter that differentiate between the independent complex mol-ecules. The uncoordinated benzyl-amine mol-ecules display different conformations in the structure, with syn-Car-Car-Cm-N (ar = aromatic, m = methyl-ene) torsion angles spanning the range -28.7 (10) to 35.1 (14)°. In the crystal, N-H⋯N and N-H⋯π inter-actions lead to supra-molecular layers in the ab plane. The layers have a zigzag topology, have the coordinating and non-coordinating benzyl-amine mol-ecules directed to the inside, and present the essentially flat PC resides to the outside. This arrangement enables adjacent layers to associate via π-π inter-actions [inter-centroid distance between pyrrolyl and fused-benzene rings = 3.593 (2) Å] so that a three-dimensional architecture is formed.
Heavy metal accumulation and depuration may alter the effectiveness of Meretrix meretrix as a biomonitoring organism for water quality assessment. Therefore, this study was conducted to evaluate the effects of heavy metal accumulation and depuration on M. meretrix, by immersing it in Copper (Cu), Zinc (Zn), and Lead (Pb)
solutions under laboratory conditions. The results showed that M. meretrix is able to accumulate Cu, Zn, and Pb at the rate of 0.99, 21.80, and 0.57 μg/g per day, respectively, and depurates at the rate of 0.42, 23.55, and 1.01 μg/g per day, respectively. These results indicate that M. meretrix could be effectively used as a biomonitoring organism for Cu because the accumulation rate is significantly (p ≤ 0.05) higher than the depuration rate. However, this was not the case for Zn because the accumulation rate was almost similar to the depuration rate, while for Pb, accumulation or depuration did not occur in M. meretrix.
Siasatan terhadap taburan dan kelimpahan kumpulan pemakanan
makroinvertebrata akuatik di Sungai Bogak, Kerian dan Serdang di lembangan sungai
Kerian menunjukkan terdapat 120 genera dari 59 keluarga dari 13 order makroinvertebrata.
Pemangsa terutamanya Odonata, Hemiptera dan Coleoptera adalah kumpulan yang paling
biasa dan didapati dalam kepadatan tinggi di Sungai Bogak (sungai yang diubah suai)
dan Sungai Kerian (sungai utama). Kumpulan dominan kedua di kedua-dua sungai itu
adalah pemungut-kumpul (Diptera dan Ephemeroptera) diikuti oleh pengikis (moluska).
Pola kumpulan pemakanan yang berlainan diperhatikan di Sungai Serdang (anak Sungai
Kerian). Kumpulan yang paling banyak adalah pemungut-kumpul, diikuti oleh pemangsa
dan pengikis. Secara umum, kelimpahan pemangsa menunjukkan korelasi positif dengan
kelimpahan mangsa mereka (kumpulan pemakanan lain). Kelimpahan pemangsa terutama
di Sungai Bogak dan Kerian, sangat dipengaruhi oleh parameter seperti PO43-, NO3-N
dan Zn. Kelimpahan pemungut-kumpul di sungai Serdang pula dipengaruhi oleh suhu
dan halaju air, TSS, kekeruhan serta kandungan Mn dan Cu di dalam sedimen. Walau
bagaimanapun, semua parameter air mempengaruhi secara lemah kelimpahan kumpulan
pemakanan di semua lokasi. Banyak pemungut-kumpul di Sungai Serdang dikaitkan dengan
air yang diperkaya oleh sisa antropogenik dari kawasan kediaman sekitar. Pada umumnya,
kumpulan pemakanan yang dominan di setiap sungai mencerminkan pengaruh keadaan
persekitaran yang berbeza dan ketersediaan sumber makanan di kawasan tersebut
Personality dimension negative emotionality is known to be associated with academic achievement. The present study focuses on the influence of negative emotionality (neuroticism) on the medical students' academic achievements. The main objective of this study was to ascertain the negative emotionality scores among the first year Malaysian medical students studying in Malaysia and India, further to find out the association between negative emotionality and their academic achievements. The current study sample includes 60 first year Malaysian medical students from Universiti Sultan Zainal Abidin, Malaysia, and USM-KLE IMP, Belgaum, India. They were selected by convenient sampling technique. The Medico-Psychological questionnaire was used to find out the negative emotionality scores among the students and these scores were compared with academic scores. The data were analyzed using SPSS- 20. Thus, the study result goes with the prediction that there is a significant correlation between academic achievement and negative emotionality. We concluded that negative emotionality has a negative impact on medical student's academic achievement regardless of the fact whether they study in their own country or overseas.
Kajian ini dijalankan untuk menentukan kesan perencatan fi tat terhadap bioavailabiliti kalsium (Ca), ferum (Fe) dan zink (Zn) dalam produk kacang soya tempatan terpilih. Fitat menyebabkan kesan perencatan terhadap penyerapan mineral seperti Ca, Fe dan Zn dengan membentuk kompleks yang tidak larut dan tidak dapat dicernakan. Kesan perencatan fi tat terhadap bioavailabiliti mineral seperti Ca, Fe dan Zn telah dianggarkan dengan nisbah molar fi tat kepada mineral. Kandungan fi tat ditentukan dengan menggunakan kaedah pertukaran anion dan kandungan mineral ditentukan dengan Spektrofotometer Serapan Atom (AAS). Produk kacang soya dibeli dari pasar malam dan gerai makanan yang terletak di Cheras dan Sri Rampai, Kuala Lumpur. Setiap sampel yang dibeli dari kedua- dua lokasi dianalisis secara duplikat. Kajian ini mendapati kek soya dan kesemua masakan yang mengandungi tempe tidak mempunyai kandungan fi tat. Ini mungkin disebabkan oleh kehadiran R. oligosporus yang menghasilkan fi tase lalu menghidrolisiskan kandungan fi tat semasa proses fermentasi tempe. Terdapat lima jenis sampel makanan yang mempunyai nisbah molar fi tat/Ca > 0.24, sepuluh jenis sampel makanan dengan nisbah molar fi tat/ Fe > 1, lapan jenis sampel makanan mempunyai nisbah molar fi tat/ Zn > 15 dan satu jenis sampel makanan mempunyai nisbah molar [fi tat x Ca]/ Zn > 200. Keputusan nisbah molar fi tat/ mineral dari kajian ini menganggarkan bioavailabiliti Ca, Fe dan Zn yang rendah. Kesimpulannya, kek soya dan masakan mengandungi tempe mempunyai bioavailabiliti mineral yang tinggi manakala tau-hoo pok bakar mempunyai bioavailabiliti mineral yang rendah.