MyMedR

Displaying publications 161 - 180 of 296 in total

Abstract:

Sort:

Fabrication of calixarene-grafted magnetic nanocomposite for the effective removal of lead(II) from aqueous solution

Kamboh MA, Wan Ibrahim WA, Rashidi Nodeh H, Zardari LA, Sanagi MM

Environ Technol, 2019 Aug;40(19):2482-2493.
PMID: 29464995 DOI: 10.1080/09593330.2018.1444100

Magnetic nanocomposites adorned with calixarene were successfully prepared by immobilizing diethanolamine functionalized p-tert-butylcalix[4]arene (DEA-Calix) onto silica-coated magnetic nanoparticles (MNPs). The synthesis, surface morphology, purity, elemental composition and thermal stability of newly prepared nanocomposites were analyzed using FT-IR spectroscopy, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX), X-ray diffractometer (XRD), thermal gravimetric analysis (TGA) and vibrating sample magnetometer (VSM). Magnetic solid-phase adsorption (MSPA) was employed to explore the adsorption behavior of DEA-Calix-MNPs towards Pb(II) from water samples prior to its flame atomic absorption spectrometric analysis. The essential analytical factors governing the adsorption efficiency such as solution pH, mass of adsorbent, concentration and contact time have been investigated and optimized. The results depict that DEA-Calix-MNPs has excellent adsorption efficiency 97% (at pH 5.5) with high adsorption capacity of 51.81 mg g-1 for Pb(II) adsorption. Additionally, kinetic and equilibrium studies suggested that Pb(II) adsorption process follows a pseudo-second-order model and Langmuir isotherms, respectively. Real sample analysis also confirmed field applicability of the new DEA-Calix-MNPs adsorbent.

Matched MeSH terms: Lead
Fulltext 10Po, 210Pb and 210Po/210Pb in sediment core from surrounding Sungai Linggi estuary

Zal U’yun Wan Mahmood, Mei, Wo Yii, Abdul Kadir Ishak

Jurnal Sains Nuklear Malaysia, 2016;28(1):1-8.
MyJurnal

This study was performed to observe the variation in the distribution of 210Po,210Pb and 210Po/210Pb activity ratio throughtheir vertical profile of the sediment cores takenat surrounding Sungai Linggi estuary. Five sediment cores were takenin February 2011 and were cutto an intervalof 2 cm layer. Activity concentrations of 210Po and 210Pb were determined using alpha radiochemical analysis and gamma direct measurement, respectively. Generally, the measured activity of 210Po, 210Pb and 210Po/210Pbwere in the ranges of 22.73 –139.06 Bqkg-1dw., 37.88 –176.24 Bqkg-1dw.and 0.23 –1.34, respectively. The variation in the distribution profile for the radionuclides are believed to be influencedby human activities such as agriculture, fertilizer, vehicles, burned fuel fossil and forest, industrialand others via river input from land-base.Other factor is due to organic mattercontent played importantrole as the geochemical carrier to transportthose radionuclides at study area. It was provedthat hasa strong correlation between the radionuclide distribution and the sedimentcomposition of organic matter.Furthermore, in those rangesreflectedthat 210Pb activities were higher than210Po with an activity ratio average of 0.79. This is probably due to dramatic increase of excess 210Pb supplied from atmospheric deposition, in situ decay of 226Ra and as a result of diagenetic remolibilazationof 210Pbin deeper layesof the sediment column. Thus, thosefactors are majorcontributions on thevariation of 210Po and 210Pb in the sediment core at surrounding Sungai Linggi estuary.

Matched MeSH terms: Lead Radioisotopes
Fulltext Application of artificial neural networks for the optimisation of wetting contact angle for lead free Bi-Ag soldering alloys

Nima Ghamarian, Azmah Hanim, M.A., Nahavandi, M., Zulkarnain Zainal, Lim, Hong Ngee

Pertanika Journal of Science & Technology, 2017;25(4):1255-1260.
MyJurnal

In the recent years, electronic packaging provides significant research and development challenges
across multiple disciplines such as performance, materials, reliability, thermals and interconnections.
New technologies and techniques frequently adopted can be implemented in soldering alloys of
semiconductor sectors in terms of optimisation. Wetting contact angle or wettability of solder alloys
is one of the important factors which has got the attention of scholars. Hence in this study, due to the
remarkable similarity over classical solder alloys (Pb-Sn), Bi-Ag solder was investigated. Data were
collected through the effects of aging time variation and different weight percentages of Ag in solder
alloys. The contact angle of the alloys with Cu plate was measured by optical microscopy. Artificial
neural networks (ANNs) were applied on the measured datasets to develop a numerical model for further
simulation. Results of the experiments and simulations showed that the coefficient of determination (R2
)
is around 0.97, which signifies that the ANN set up is appropriate for the evaluation.

Matched MeSH terms: Lead
An assessment of the pH changes and metal ions released into artificial saliva by fake orthodontic braces

Haleem R, Shafiai NAA, Noor SNFM

BMC Oral Health, 2023 Sep 16;23(1):669.
PMID: 37717000 DOI: 10.1186/s12903-023-03339-7

BACKGROUND: This present study assesses changes in the pH as well as the metal ions that fake braces release into artificial saliva (AS) using a pH meter and inductively coupled plasma atomic emission spectroscopy (ICP-AES), respectively.
METHODS: Three sets of fake archwires (AWs) and brackets (Bs) as well as a set of controls were immersed in AS and placed in an incubator shaker at 50 rpm and 37°C. At Days 0, 1, 7, 14, 21, and 28, the pH of the AS medium was measured and 3.0 ml of AS was collected and stored at -20°C for elemental analysis.
RESULTS: Significant changes in pH were observed on Days 0, 1, 7, 14, 21, and 28 in the AS of the AW group. However, these changes were only observed in the B group on Days 0 and 7. The fake samples released a large quantity of sodium (Na), potassium (K), and calcium (Ca) ions, at concentrations exceeding 100 mg/L, post-28 days of immersion. The control and fake braces samples released other ions; such as lithium (Li), magnesium (Mg), barium (Ba), chromium (Cr), copper (Cu), lead (Pb), and aluminium (Al); at concentrations that did not exceed 10 mg/L.
CONCLUSIONS: The pH of the AS of all the samples increased post-incubation. Only 10 ions; namely, Na, Li, K, Mg, Ca, Ba, Cr, Cu, Pb, and Al; were detected in the AS.

Matched MeSH terms: Lead
Inverse vulcanization induced oxygen modified porous polysulfides for efficient sorption of heavy metals

Lyu S, Abidin ZZ, Yaw TCS, Resul MFMG

Environ Sci Pollut Res Int, 2024 Mar;31(11):16940-16957.
PMID: 38326685 DOI: 10.1007/s11356-024-32323-z

The applications of polysulfides derived from natural plant oil and sulfur via the inverse vulcanization in the removal of heavy metals from aqueous solutions suffered from their low porosity and scarce surface functionality because of their hydrophobic surfaces and bulk characteristics. In this study, polysulfides from sulfur and palm oil (PSPs) with significantly enhanced porosity (13.7-24.1 m2/g) and surface oxygen-containing functional groups (6.9-8.6 wt.%) were synthesized with the optimization of process conditions including reaction time, temperature, and mass ratios of sulfur/palm oil/NaCl/sodium citrate. PSPs were applied as sorbents to remove heavy metals present in aqueous solutions. The integration of porosity and oxygen modification allowed a fast kinetic (4.0 h) and enhanced maximum sorption capacities for Pb(II) (218.5 mg/g), Cu(II) (74.8 mg/g), and Cr(III) (68.4 mg/g) at pH 5.0 and T 298 K comparing with polysulfides made without NaCl/sodium citrate. The sorption behaviors of Pb(II), Cu(II), and Cr(III) on PSPs were highly dependent on the solution pH values and ionic strength. The sorption presented excellent anti-interference capability for the coexisting cations and anions. The sorption processes were endothermic and spontaneous. This work would guide the preparation of porous polysulfides with surface modification as efficient sorbents to remediate heavy metals from aqueous solutions.

Matched MeSH terms: Lead
Fulltext Assessment of Urinary Lead (Pb) and Essential Trace Elements in Autism Spectrum Disorder: a Case-Control Study Among Preschool Children in Malaysia

Abd Wahil MS, Ja'afar MH, Md Isa Z

Biol Trace Elem Res, 2022 Jan;200(1):97-121.
PMID: 33661472 DOI: 10.1007/s12011-021-02654-w

Lead (Pb) is a heavy metal which is abundant in the environment and known to cause neurotoxicity in children even at minute concentration. However, the trace elements calcium (Ca), magnesium (Mg), zinc (Zn) and iron (Fe) are essential to children due to its protective effect on neurodevelopment. The primary objective of this study was to assess the role of Pb and trace elements in the development of autism spectrum disorder (ASD) among preschool children. A total of 81 ASD children and 74 typically developed (TD) children aged between 3 and 6 years participated in the study. Self-administered online questionnaires were completed by the parents. A first-morning urine sample was collected in a sterile polyethene urine container and assayed for Pb, Ca, Mg, Zn and Fe using an inductively coupled plasma mass spectrometry (ICP-MS). Comparisons between groups revealed that the urinary Pb, Mg, Zn and Fe levels in ASD children were significantly lower than TD children. The odds of ASD reduced significantly by 5.0% and 23.0% with an increment of every 1.0 μg/dL urinary Zn and Fe, respectively. Post interaction analysis showed that the odds of ASD reduced significantly by 11.0% and 0.1% with an increment of every 1.0 μg/dL urinary Zn and Pb, respectively. A significantly lower urinary Pb level in ASD children than TD children may be due to their poor detoxifying mechanism. Also, the significantly lower urinary Zn and Fe levels in ASD children may augment the neurotoxic effect of Pb.

Matched MeSH terms: Lead
Tissue and Serum Trace Elements Concentration among Colorectal Patients: A Systematic Review of Case-Control Studies

Nawi AM, Chin SF, Azhar Shah S, Jamal R

Iran J Public Health, 2019 Apr;48(4):632-643.
PMID: 31110973

Background: Trace elements play a pivotal role in Colorectal Cancer (CRC) inhibition and development process. This systematic review provides the basic comparison of case-control studies focusing on concentration of trace elements between those with CRC and controls.
Methods: The systematic review searched through two databases of Medline and Cochrane up to 24th June 2017. The search strategy focused on Population, Intervention, Comparison, and Outcomes (PICO). We searched the role of trace elements in cancer and focusing on case-control studies in CRC to obtain an insight into the differences in trace element concentrations between those with and without cancer.
Results: The serum concentrations of Ca, Cu, Mg, Mn, Se, Si, and Zn were lower in CRC patients but for Co and S the levels were higher in CRC patients. The concentrations of Cd, Cr, Cu, Mg, Mn, Pb, and Zn were increased in patients with metastasis, but not in Se. As for colon tissue specimens, inconsistent levels were reported between studies, notably in Cu, Se, and Zn. No changes were reported for B and Ca levels. Most of the trace elements in the tissue specimens showed higher concentrations of Cr, Fe, K, Mg, P, Rb, S, and Si compared to Br.
Conclusion: With the growing interest to understand the link between trace elements in carcinogenesis and the possible interactions, multi assessment analysis of a larger cohort of samples is necessary.

Matched MeSH terms: Lead
Synthesis of linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(ΙΙ) from aqueous solutions

Irani M, Ismail H, Ahmad Z, Fan M

J Environ Sci (China), 2015 Jan 1;27:9-20.
PMID: 25597658 DOI: 10.1016/j.jes.2014.05.049

The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy (FTIR), Solid carbon nuclear magnetic resonance spectroscopy (CNMR)), silicon(-29) nuclear magnetic resonance spectroscopy (Si NMR)), and X-ray diffraction spectroscope ((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy (FTIR)), scanning electron microscopy (SEM)), and X-ray photoelectron spectroscopy ((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II) followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430mg/g. Thus, the waste linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent.

Matched MeSH terms: Lead/chemistry*
Fulltext Determination of lead, cations, and anions concentration in indoor and outdoor air at the primary schools in Kuala Lumpur

Awang N, Jamaluddin F

J Environ Public Health, 2014;2014:408275.
PMID: 25136371 DOI: 10.1155/2014/408275

This study was carried out to determine the concentration of lead (Pb), anions, and cations at six primary schools located around Kuala Lumpur. Low volume sampler (MiniVol PM10) was used to collect the suspended particulates in indoor and outdoor air. Results showed that the concentration of Pb in indoor air was in the range of 5.18 ± 1.08 μg/g-7.01 ± 0.08 μg/g. All the concentrations of Pb in indoor air were higher than in outdoor air at all sampling stations. The concentrations of cations and anions were higher in outdoor air than in indoor air. The concentration of Ca(2+) (39.51 ± 5.01 mg/g-65.13 ± 9.42 mg/g) was the highest because the cation existed naturally in soil dusts, while the concentrations of NO3 (-) and SO4 (2-) were higher in outdoor air because there were more sources of exposure for anions in outdoor air, such as highly congested traffic and motor vehicles emissions. In comparison, the concentration of NO3 (-) (29.72 ± 0.31 μg/g-32.00 ± 0.75 μg/g) was slightly higher than SO4 (2-). The concentrations of most of the parameters in this study, such as Mg(2+), Ca(2+), NO3 (-), SO4 (2-), and Pb(2+), were higher in outdoor air than in indoor air at all sampling stations.

Matched MeSH terms: Lead/analysis*
Fulltext Study of heavy metal levels among farmers of Muda Agricultural Development Authority, Malaysia

Ghazali AR, Abdul Razak NE, Othman MS, Othman H, Ishak I, Lubis SH, et al.

J Environ Public Health, 2012;2012:758349.
PMID: 22536276 DOI: 10.1155/2012/758349

Heavy metals, particularly cadmium, lead, and arsenic, constitute a significant potential threat to human health. This study was conducted to determine the levels of cadmium, lead, and arsenic in nail samples from farmers at Muda Agricultural Development Authority (MADA), Kedah, Malaysia, and evaluate factors that can contribute to their accumulations. A total of 116 farmers participated in this study. Inductively coupled plasma mass spectrometry (ICP-MS) was used to analyze concentration of heavy metals in the nail samples and questionnaires were given to participants to get demographic, health status, and their agricultural activities data. In this paper, the level of heavy metals was within the normal range and varies according to demographic factors. We found that there were significant correlations between working period with level of lead and arsenic (r=0.315 and r=0.242, resp., P<0.01) and age with lead level (r=0.175, P<0.05). Our findings suggested that agricultural activities could contribute to the accumulation of heavy metals in farmers. Hence, the control of environmental levels of and human exposure to these metals to prevent adverse health effects is still an important public health issue.

Matched MeSH terms: Lead/metabolism*
Sorption of Pb(ll) by poly(hydroxamic acid) grafted oil palm empty fruit bunch

Haron MJ, Tiansin M, Ibrahim NA, Kassim A, Wan Yunus WM, Talebi SM

Water Sci Technol, 2011;63(8):1788-93.
PMID: 21866782

This paper describes the sorption of Pb(ll) from aqueous solution. Oil palm empty fruit bunch (OPEFB) fiber was first grafted with poly(methylacrylate) and then treated with hydroxylammonium chloride in alkaline medium to produce hydroxamic acid (PHA) grafted OPEFB. Sorption of Pb(ll) by PHA-OPEFB was maximum at pH 5. The sorption followed the Langmuir model with maximum capacityof 125.0 mg g-1 at 25 degrees C. The sorption process was exothermic, as shown by the negative value of enthalpy change, Delta H0. The free energy change (DeltaG0) for the sorption was negative, showing that the sorption process was spontaneous. A kinetic study showed that the Pb(ll) sorption followed a second order kinetic model.

Matched MeSH terms: Lead/chemistry*
Fulltext Long-term responses of rainforest erosional systems at different spatial scales to selective logging and climatic change

Walsh RP, Bidin K, Blake WH, Chappell NA, Clarke MA, Douglas I, et al.

Philos Trans R Soc Lond B Biol Sci, 2011 Nov 27;366(1582):3340-53.
PMID: 22006973 DOI: 10.1098/rstb.2011.0054

Long-term (21-30 years) erosional responses of rainforest terrain in the Upper Segama catchment, Sabah, to selective logging are assessed at slope, small and large catchment scales. In the 0.44 km(2) Baru catchment, slope erosion measurements over 1990-2010 and sediment fingerprinting indicate that sediment sources 21 years after logging in 1989 are mainly road-linked, including fresh landslips and gullying of scars and toe deposits of 1994-1996 landslides. Analysis and modelling of 5-15 min stream-suspended sediment and discharge data demonstrate a reduction in storm-sediment response between 1996 and 2009, but not yet to pre-logging levels. An unmixing model using bed-sediment geochemical data indicates that 49 per cent of the 216 t km(-2) a(-1) 2009 sediment yield comes from 10 per cent of its area affected by road-linked landslides. Fallout (210)Pb and (137)Cs values from a lateral bench core indicate that sedimentation rates in the 721 km(2) Upper Segama catchment less than doubled with initially highly selective, low-slope logging in the 1980s, but rose 7-13 times when steep terrain was logged in 1992-1993 and 1999-2000. The need to keep steeplands under forest is emphasized if landsliding associated with current and predicted rises in extreme rainstorm magnitude-frequency is to be reduced in scale.

Matched MeSH terms: Lead Radioisotopes/analysis
Pb(II) biosorption using chitosan and chitosan derivatives beads: equilibrium, ion exchange and mechanism studies

Ngah WS, Fatinathan S

J Environ Sci (China), 2010;22(3):338-46.
PMID: 20614774

The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and different initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non-linear Langmuir isotherm for chitosan, chitosan-GLA and chitosan-alginate beads in single metal system were 34.98, 14.24 and 60.27 mg/g, respectively. However, the adsorption capacity of Pb(II) ions were reduced in the binary metal system due to the competitive adsorption between Pb(II) and Cu(II) ions. Based on the ion exchange study, the release of Ca2+, Mg2+, K+ and Na+ ions played an important role in the adsorption of Pb(II) ions by all three adsorbents but only at lower concentrations of Pb(II) ions. Infrared spectra showed that the binding between Pb(II) ions and the adsorbents involved mostly the nitrogen and oxygen atoms. All three adsorbents showed satisfactory adsorption capacities and can be considered as an efficient adsorbent for the removal of Pb(II) ions from aqueous solutions.

Matched MeSH terms: Lead/chemistry*
A novel agricultural waste adsorbent for the removal of lead (II) ions from aqueous solutions

Ibrahim MN, Ngah WS, Norliyana MS, Daud WR, Rafatullah M, Sulaiman O, et al.

J Hazard Mater, 2010 Oct 15;182(1-3):377-85.
PMID: 20619537 DOI: 10.1016/j.jhazmat.2010.06.044

The present study explores the ability of modified soda lignin (MSL) extracted from oil palm empty fruit bunches (EFB) in removing lead (II) ions from aqueous solutions. The effect of contact time, point zero charge (pH(pzc)) and pH of the solution, initial metal ion concentration and adsorbent dosage on the removal process were investigated. Furthermore, the MSL is characterized by SEM, XRF, FT-IR and surface area analysis. Equilibrium adsorption isotherms and kinetics were investigated. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models of adsorption. The kinetic data obtained at different initial concentrations were analyzed using pseudo-first-order and pseudo-second-order models. The results provide strong evidence to support the hypothesis of adsorption mechanism.

Matched MeSH terms: Lead/isolation & purification*
Sequestration of toxic Pb(II) ions by chemically treated rubber (Hevea brasiliensis) leaf powder

Kamal MH, Azira WM, Kasmawati M, Haslizaidi Z, Saime WN

J Environ Sci (China), 2010;22(2):248-56.
PMID: 20397414

Rubber leaf powder (an agricultural waste) was treated with potassium permanganate followed by sodium carbonate and its performance in the removal of Pb(II) ions from aqueous solution was evaluated. The interactions between Pb(II) ions and functional groups on the adsorbent surface were confirmed by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX). The effects of several important parameters which can affect adsorption capacity such as pH, adsorbent dosage, initial lead concentration and contact time were studied. The optimum pH range for lead adsorption was 4-5. Even at very low adsorbent dosage of 0.02 g, almost 100% of Pb(II) ions (23 mg/L) could be removed. The adsorption capacity was also dependent on lead concentration and contact time, and relatively a short period of time (60-90 min) was required to reach equilibrium. The equilibrium data were analyzed with Langmuir, Freundlich and Dubinin-Radushkevich isotherms. Based on Langmuir model, the maximum adsorption capacity of lead was 95.3 mg/g. Three kinetic models including pseudo first-order, pseudo second-order and Boyd were used to analyze the lead adsorption process, and the results showed that the pseudo second-order fitted well with correlation coefficients greater than 0.99.

Matched MeSH terms: Lead/chemistry*
Hexavalent chromium adsorption on impregnated palm shell activated carbon with polyethyleneimine

Owlad M, Aroua MK, Wan Daud WM

Bioresour Technol, 2010 Jul;101(14):5098-103.
PMID: 20156679 DOI: 10.1016/j.biortech.2010.01.135

Removal of Cr(VI) ions from aqueous solution was investigated using modified palm shell activated carbon. Low Molecular Weight Polyethyleneimine (LMW PEI) was used for impregnation purpose. The maximum amount of LMW PEI adsorbed on activated carbon was determined to be approximately 228.2mg/g carbon. The adsorption experiments were carried out in a batch system using potassium dichromate K(2)Cr(2)O(7) as the source of Cr(VI) in the synthetic waste water and modified palm shell activated carbon as the adsorbent. The effects of pH, concentration of Cr(VI) and PEI loaded on activated carbon were studied. The adsorption data were found to fit well with the Freundlich isotherm model. This modified Palm shell activated carbon showed high adsorption capacity for chromium ions.

Matched MeSH terms: Lead/chemistry
Adsorption characterization of Pb(II) and Cu(II) ions onto chitosan-tripolyphosphate beads: Kinetic, equilibrium and thermodynamic studies

Ngah WS, Fatinathan S

J Environ Manage, 2010 Mar-Apr;91(4):958-69.
PMID: 20044203 DOI: 10.1016/j.jenvman.2009.12.003

Chitosan-tripolyphosphate (CTPP) beads were synthesized, characterized and were used for the adsorption of Pb(II) and Cu(II) ions from aqueous solution. The effects of initial pH, agitation period, adsorbent dosage, different initial concentrations of heavy metal ions and temperature were studied. The experimental data were correlated with the Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. The maximum adsorption capacities of Pb(II) and Cu(II) ions in a single metal system based on the Langmuir isotherm model were 57.33 and 26.06 mg/g, respectively. However, the beads showed higher selectivity towards Cu(II) over Pb(II) ions in the binary metal system. Various thermodynamic parameters such as enthalpy (DeltaH degrees), Gibbs free energy (DeltaG degrees) and entropy (DeltaS degrees) changes were computed and the results showed that the adsorption of both heavy metal ions onto CTPP beads was spontaneous and endothermic in nature. The kinetic data were evaluated based on the pseudo-first and -second order kinetic and intraparticle diffusion models. Infrared spectra were used to elucidate the mechanism of Pb(II) and Cu(II) ions adsorption onto CTPP beads.

Matched MeSH terms: Lead/chemistry*
Effect of impregnation of activated carbon with chelating polymer on adsorption kinetics of Pb2+

Aroua MK, Yin CY, Lim FN, Kan WL, Daud WM

J Hazard Mater, 2009 Jul 30;166(2-3):1526-9.
PMID: 19168286 DOI: 10.1016/j.jhazmat.2008.11.033

The effects of polyethyleneimine (PEI) impregnation on the Pb(2+) adsorption kinetics of palm shell-activated carbon and pH profile of bulk solution were investigated. Adsorption data were fitted to four established adsorption kinetics models, namely, pseudo-first-order, pseudo-second-order, Elovich equation and intraparticle diffusion. It was found that PEI impregnation at 16.68 and 29.82 wt% PEI/AC increased the Pb(2+) uptake rate while the opposite was observed for PEI impregnation at 4.76 and 8.41 wt% PEI/AC. The increased uptake rates were due to higher concentration of PEI molecules on the surface of clogged pores as well as varying pore volumes. The adsorption kinetics data fitted the pseudo-second-order model better than the pseudo-first-order model, implying chemisorption was the rate-controlling step. The bulk solution pH generally showed an increasing trend from the use of virgin to PEI-impregnated activated carbon.

Matched MeSH terms: Lead/isolation & purification*
The influence of low blood lead concentrations on the cognitive and physical development of primary school children in Malaysia

Zailina H, Junidah R, Josephine Y, Jamal HH

Asia Pac J Public Health, 2008;20(4):317-26.
PMID: 19124326 DOI: 10.1177/1010539508322697

This study aimed to determine the relationship between blood lead (BPb) concentrations and cognitive and physical development in school children. A total of 169 urban children and 100 industrial children of Malay ethnicity, in the age range of 6(1/2) to 8(1/2) years, were selected. BPb was determined using GF atomic absorption spectrophotometer. The mean cognitive score (102.55) of the children from the industrial area was significantly higher than that of the urban children (95.09; P < .001). However, no significant differences were found in the BPb levels between the 2 groups (industrial, 3.75 microg/dL; urban, 3.56 microg/dL). There was significant inverse correlation between BPb and cognitive scores for all children (P < .05). The cognitive scores for all children were influenced by BPb after adjustments (P < .05). The urban children had significantly better Weight for Height and Left Arm Circumference values than those from industrial area. There was no significant correlation between BPb and the anthropometric measurements. In conclusion, low BPb influenced the cognitive development, whereas physical development was not affected.

Matched MeSH terms: Lead/blood*
Continuous adsorption of lead ions in a column packed with palm shell activated carbon

Issabayeva G, Aroua MK, Sulaiman NM

J Hazard Mater, 2008 Jun 30;155(1-2):109-13.
PMID: 18179867 DOI: 10.1016/j.jhazmat.2007.11.036

The continuous adsorption of lead ions from aqueous solution on commercial, granular, unpretreated palm shell activated carbon (PSAC) was studied. Effect of pH, flow rates and presence of complexing agents (malonic and boric acids) were examined. The breakthrough period was longer at pH 5 indicating higher adsorption capacity of lead ions at higher pH. Increase of the flow rate, expectedly, resulted in the faster saturation of the carbon bed. Presence of complexing agents did not improve adsorption uptake of lead ions. However, presence of malonic acid resulted in smoother pH stabilization of solution compared to single lead and lead with boric acid systems. The results on continuous adsorption of lead were applied to the model proposed by Wang et al. [Y.-H. Wang, S.-H. Lin, R.-S. Juang, Removal of heavy metals ions from aqueous solutions using various low-cost adsorbents, J. Hazard. Mater. B 102 (2003) 291-302]. The agreement between experimental and modelled breakthrough curves was satisfactory at both pHs.

Matched MeSH terms: Lead/chemistry*

Filters

Please provide feedback to Administrator ([email protected])

External Links