The distribution of heavy metals (Cu, Zn, Cd, Pb) in surface sediments was examined in waters off the coast of Marang, Terengganu. A total of 20 samples were collected using Ponar grab and analysed by inductively coupled plasma-mass spectrometer after closed digestion with acid. The sediments were filtered using a dry sieving method to determine their particle size. The spatial distribution maps on the concentration of selected metals were drawn using the ArcGIS software. Results showed that the average concentration of Cu, Zn, Cd, and Pb were 2.33±0.38 µg/g dry weight, 28.4±3.78 µg/g dry weight, 0.09±0.01 µg/g dry weight and 8.35±1.48 µg/g dry weight, respectively. The level of pollution was also evaluated using the Index of Geoaccumulation (Igeo) and Pollution Load Index (PLI). All Igeo and PLI values obtained were low, which indicated low or no pollution. Meanwhile, the sediment mean size ranged between -0.77Ø and 3.18Ø, which characterised a sandy type of sediment. Correlation analysis showed a positive correlation between the heavy metals and sediment size. The results indicated that there was a common source of heavy metal pollution in the study area, possibly from shipping activities. Overall, there was no significant heavy metal pollution in the waters off Marang. This finding is important as the data could be used to evaluate the risk of metal contamination and the impact of anthropogenic activities on the marine environment.
Nanosize semiconductors have been used as active sensitizers for the application of quantum dot-sensitized solar cells (QDSSC). "Green" sensitizers are introduced as an alternative for the toxic Cd and Pb based compounds. In this work, Bi₂S₃ quantum dots (QDs) were fabricated and used as sensitizers in QDSSC. QDs were grown on TiO₂ electrode via solution dipping process. Although the performance of "green" QDSSC is not as high as that of CdS or CdSe based QDSSCs, its performance can be enhanced with post heat treatment. The effect is dependent on the heat treatment temperature profile where gradual increase of sintering temperature is preferred. The effects of post heat treatment on Bi₂S₃ sensitized TiO₂ electrodes are investigated and discussed.
Neuropathic pain arises from the injury of nervous system. The condition is extremely difficult to be treated due to the ineffectiveness and presence of various adverse effects of the currently available drugs. In the present study, we investigated the antiallodynic and antihyperlagesic properties of cardamonin, a naturally occurring chalcone in chronic constriction injury (CCI)-induced neuropathic pain mice model. Our findings showed that single and repeated dose of intra-peritoneal administration of cardamonin (3, 10, 30mg/kg) significantly inhibited (P<0.001) the chronic constriction injury-induced neuropathic pain using the Hargreaves plantar test, Randall-Selitto analgesiometer test, dynamic plantar anesthesiometer test and the cold plate test in comparison with the positive control drug used (amitriptyline hydrochloride, 20mg/kg, i.p.). Pre-treatment with naloxone hydrochloride (1mg/kg, i.p.) and naloxone methiodide (1mg/kg, s.c) significantly reversed the antiallodynic and antihyperalgesic effects of cardamonin in dynamic plantar anesthesiometer test and Hargreaves plantar test, respectively. In conclusion, the current findings demonstrated novel antiallodynic and antihyperalgesic effects of cardamonin through the activation of the opioidergic system both peripherally and centrally and may prove to be a potent lead compound for the development of neuropathic pain drugs in the future.
Fourteen sediment samples were collected along Linggi River, Malaysia. Neutron activation analysis (NAA) and inductively coupled plasma-mass spectrometry (ICP-MS) techniques were used in the determination of toxic element contents. The results showed that As, Cd and Sb concentrations were higher at all sampling stations, with enrichment factor values ranging from 17.7 to 75.0, 2.1 to 19.5 and 6.6 to 28.4, respectively. Elements of Pb and Zn) were also enriched at most of the sampling stations whilst Cu, Cr and Ni were shown as background levels. The sediment of Linggi River can be categorised as low (<8.0) to very high degree of contamination (>32.0). The mean concentrations of elements viz. Cd, Cr, Ni, Pb, Sb and Zn were lower than the threshold effect level (TEL) of FSQGs values except for As. The concentration of As (arsenic) was higher than PEL and PEC of FSQGs values.
Various amendments are used to reduce the phytoavailability of heavy metals in contaminated soils, but recently the use of biochar is receiving serious attention. In this study, two particle sizes of an oil palm empty fruit bunch biochar (EFBB); <50 µm (F-EFBB) and >2 mm (C-EFBB) were applied at either 0, 0.5, or 1% (w/w) to soils contaminated with either Cd or Pb and the phytoavailability of these metals by mustard plants grown on the soils was evaluated. Results revealed that the application of EFBB at 1% significantly increased plant growth parameters as compared with the control in Cd-soil. However, there was no significant effect of EFBB application rate on plant growth parameters in Pb-soil. There was a significant difference in the concentrations of Cd and Pb in the plant root and shoot between soils receiving different particle sizes of EFBB. The treatment of 1% F-EFBB gave the lowest concentration of the Cd concentration in the shoot (115.200 mgkg-1) and Pb concentration in the root and shoot (4196.000 and 78.467 mgkg-1, respectively) as compared with the other treatments. Therefore, F-EFBB application at high rates can be recommended for reducing the phytoavailability of Cd and Pb in contaminated soils.
A study of the heavy metal bio-accumulation by fresh water fish, Tilapia nilotica around Lohan Dam was carried out in aquarium system. The study showed that the fish tissues cultured in contaminated water samples, (location S3 and 54) contain higher heavy metals concentration compared with the fish cultured in uncontaminated water samples (S1 and S2). The concentrations of Fe, Zn, Mn, Cu, Ni and Cr in fish tissues are higher compared with those of Co, Cd and Pb. The bio-accumulation rates of Zn, Mn, Cu, Ni and Co are 25 times higher than those of the base levels and 10 times higher than those of the controls. The heavy metal bio-accumulation order in T. nilotica is as follows: Mn> Cu> Cr> Ni> Co> Zn> Pb> Cd> Fe. The heavy metal intakes by fish during the experimental period did not exceed the level concentration levels.
Kajian bioakumulasi logam berat oleh ikan air tawar, Tilapia nilotica di perairan sekitar Empangan Lohan dilakukan dengan kaedah ternakan akuarium. Hasil kajian menunjukkan tisu ikan yang diternak dalam sampel air tercemar (lokasi S3 dan S4) mengandungi logam berat yang lebih tinggi dari tisu ikan yang diternak dalam sampel air tidak tercemar (lokasi S1 dan S2). Kepekatan logam berat seperti Fe, Zn, Mn, Cu, Ni dan Cr didapati tinggi dalam tisu ikan berbanding dengan kepekatan Co, Cd dan Pb. Kadar bioakumulasi logam berat daIam ikan didapati tinggi bagi Zn, Mn, Cu, Ni dan Co yang masing-masing melebihi 25 kali ganda dari paras asal dan lebih 10 kali ganda dari paras kawalan. Siri bioakumulasi logam berat yang dikaji dalam ikan T. nilotica menurut urutan; Mn> Cu> Cr> Ni> Co> Zn> Pb> Cd> Fe. Kepekatan logam berat yang dapat diambil oleh ikan dalam masa kajian tidak mencapai nilai yang dapat menyebabkan kematian kepada ikan.
In this study, heavy metal data (including four geochemical fractions) from offshore and intertidal sediments collected off the west coast of Peninsular Malaysia were analyzed using factor analysis. A similarity was found when comparing between offshore and intertidal sediments, where out of the 20 variables, five factors (resistant Cu, total Cu, resistant Pb, total Pb and total Zn) could be clearly selected on the basis of their high loadings as derived by factor analysis in both sediment sampling areas. However, the statistical outputs based on the present study using factor analysis cannot be practically acceptable mainly because the resistant fractions are not of anthropogenic origins and ecotoxicologists are more concern on the anthropogenic ones. Only a modification using a specific normalizing agent such as the nonresistant fraction, should be tested to show feasibility of the contribution of anthropogenic sources in the two sampling areas. However, a more comprehensive metal monitoring data should be compiled to complement the results obtainable from factor analysis, before a valid Malaysian Marine Sediment Pollution Index or Sediment Quality Guidelines, can be proposed to be established.
Characterisation of the leaching behaviour of coal fly ash from Tenaga Nasional Berhad (TNB) by using tank leaching test method has been reported. The leachability of the constituents such as major elements and toxic metals in the coal fly ash was studied. Eight renewed leachant solutions after 6 hours, 1, 2, 5, 8, 21, 36 and 64 days were investigated after filtration. The parameters namely pH, cumulative release regarding the major elements and toxic metals to duration were presented. The results showed that the pH solutions increased from pH 4 to neutral and remained stable during the test. It might have resulted from the large buffering capacity of the coal fly ashes. Five major elements namely Al, Ca, K, Mg and Na were detected with Ca concentration in the leachant solutions was the highest for all samples. Toxic metals such as As, Ba, Co, Cr, Mn, Ni, Pb, Se and Zn were found and the test showed consistent results on the As, Ba, Mn, Se and Zn in leachant solutions. The findings also showed that some of the toxic metal concentrations namely As, Ba, Cr, Pb and Se exceeded the maximum allowance of the guideline of drinking water quality in Malaysia and WHO. Obviously, proper waste management has to be applied in this scenario.
This study was carried out by using Centella asiatica grown using a hydroponic system under laboratory conditions to study synergistic and antagonistic effects of Zn bioaccumulation with added Pb and the changes in antioxidant activities in leaves and roots of C. asiatica. The antioxidant activities included superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX) and guaiacol peroxidase (GPX). The treatments Zn (2 ppm) + Pb (0.4 ppm) and Zn (4 ppm) + Pb (0.6 ppm) increased the accumulation of Zn in leaves by 14.06 and 16.84%, respectively, but decreased by 7.36% uptake in roots (Zn 4 ppm + Pb 0.6 ppm). This showed that Pb and Zn acted synergistically to Zn accumulation in leaves but antagonistically in roots. CAT and SOD activities in leaves were increased when Zn was added together with Pb. In roots, CAT, APX and SOD activities were increased but GPX was decreased. Owing to their sensitivities to Zn with Pb, SOD and CAT could be used as biomarkers to monitor the toxicity of Pb and Zn exposure in the leaves and roots of C. asiatica.
Freshwater fish has been studied and reported numerously. However, little attention has been made and limited studies available on local marine fish in Malaysia. Thus, in this study, concentrations of heavy metals (Cd, Cr, Pb and Cu) were studied in four major local marine fish Megalaspis cordyla (hardtail scad), Rastrelliger kanagurta (Indian mackerel), Selaroides leptolepis (yellowstripe scad) and Sardinella fimbriata (fringescale sardinella). The study was also intended to estimate potential health risk assessment from these heavy metals to the consumption of fish and assess maximum allowable fish consumption rate. The range of heavy metal concentrations were 0.053-0.096 mg/kg for Cd, 1.16-2.34 mg/kg for Cr, 8.34-12.44 mg/kg for Pb and 1.40-3.21 mg/kg for Cu in four major self-caught saltwater fish. Heavy metal levels of Cd and Cu in the local marine fish from Port Dickson are below the limit enforced by Food Regulations (1985) while the levels of Cr and Pb have exceeded the limit. Potential health risks associated with Cd, Cr, Cu and Pb were assessed based on target hazard quotients. HQ values calculated for Cd, Cr and Cu were less than 1, thus indicate that no adverse effects while HQ values for Pb exceeded 1 for all the fish species assessed with the exception of Megalaspis spp and Sardinella sppa. Cr was the highest while Pb concentrations were the lowest in all the studied fish samples for maximum allowable fish consumption rate. A long term monitoring program is crucial to be done in coastal areas with high consumption of local marine fish along Port Dickson to obtain real consumption rates and other cofounders factors in local population.
Technical benefit of incorporation of Palm Oil Clinker (POC) in cement-based applications has been proven in recent
studies. The aim of this work was to assess the heavy metal leaching behavior to ensure environmental safety of using
POC in cement-based applications. The chemical composition, morphology, total organic carbon (TOC) and mineralogy
were determined using XRF, FESEM, TOC analyzers and XRD to select appropriate chemical reagents for complete digestion.
HNO3
, HF and HClO4
were used for digestion of POC to measure heavy metal content using ICP-MS. The chemical reagents
CH3
COOH, NH2
OH-HCl, H2
O2
+CH3
COONH4
and HF+HNO3
+HCl were used for extraction of acid soluble, reducible,
oxidizable and residual fractions of heavy metals in POC, respectively. The leaching toxicity of the POC was investigated
by the USEPA 1311 TCLP method. The result showed the presence of Be, V, Cr, Ni, Cu, Zn, As, Se, Ag, Cd, Ba and Pb with
levels of 5.13, 11.02, 2.65, 1.93, 45.43, 11.84, 15.07, 0, 0, 81.97 and 1.76 mg/kg, respectively, in POC. The leaching value
in mg/L of As (4.56), Cu(1.05), Be (0.89), Zn(0.51), Ba(0.26), Ni (0.17), V(0.15), Cr(0.001) and Se (0.001) is found well
below the standard limit of risk. Risk assessment code (RAC) analysis confirms the safe incorporation of POC in cementbased
applications.
Xanthan integrated graphene oxide functionalized by titanium dioxide was successfully prepared through facile, eco-friendly and cost effective ice-templating technique. The three-dimensional (3D) graphene composite demonstrated relatively high temperature stability, chemical functionalities and porous sponge-like structure. The adsorption of lead was favored by high initial concentration and shaking speed at the operational solution pH. The process equilibrium and kinetic adhered to the Langmuir and pseudo-second-order correlations, respectively. The biomass integrated graphene composite showed maximum adsorption capacities ranging from 132.18 to 199.22 mg/g for 30-70 °C. Moreover, it was highly regenerable under mild conditions (0.1 M hydrochloric acid, 30 °C) and used repeatedly while retaining 84.78% of its initial adsorption capacity at the fifth adsorption-regeneration cycle. With comparatively high lead adsorption capacities, adequate recyclability and environmentally friendliness, the as-prepared 3D graphene composite has high application potential in heavy metal-wastewater separation for protection of the environment and human health.
This study is focused on the determination of trace metals (Cr, Cu, Zn, As, Pb, and Cd) concentrations of nine different indigenous fish species of Meghna River in Bangladesh to know the possible risk in human consumption. Fishes' wet muscles samples were analyzed to evaluate the level of trace metal concentrations. The concentrations (mg kg-1 w/w) of the six selected trace metals were in the order Zn (1.42 ± 0.12) > Cr (1.31 ± 0.08) > Cu (0.92 ± 0.09) > Pb (0.54 ± 0.07) > Cd (0.51 ± 0.07) > As (0.47 ± 0.02). The results revealed that all the selected trace metals were below the maximum permissible limits recommended by the reference standards. The fish species may pose no risk with respect to the Estimated Daily Intake (EDI). Target hazard quotient (THQ) values for Cr, Cu, Zn, Pb, and Cd in all the fish species were <1.0, except for As which is dominantly organic in fishes. Both adults and children are vulnerable to carcinogenic health threat due to Cd exposure.
Currently, heavy metals and dyes are some of the most critical pollutants in the aquatic environment. So, in this paper "waste-to-resource conversion", as a new application of modified mine silicate waste to remove Pb2+ ion and methylene blue (MB) dye, adsorption properties, mechanism of action and recycling were studied. Silicate wastes are located in the alteration zone and the margin of molybdenum ore, these wastes are under the influence of hydrothermal solutions which are impregnated with iron and manganese ions. Hence, acid and base modifications have been commonly used. So, in this study, a highly porous nanostructure of modified silicate waste was used to remove MB and Pb2+ ion, in subsequent to our previous study on the application of the raw material of the same in the removal of malachite green. Acid, base, and acid/base treatments were used to activate and modify the adsorbent. Results show a significantly higher potential of modified adsorbent in the removal of MB and Pb2+ compared to the raw material. According to the isotherm and kinetic studies for MB and Pb2+ the Langmuir and Temkin and pseudo-second-order models were investigated with experimental data. Modified nanomaterial was used for several adsorption and desorption processes, without a significant decrease in the capability of the adsorbent in the removal of MB and Pb2+ pollutants. Leached iron and manganese ions (as production of modification) are deposited in the form of sludge using a simple pH adjustment and precipitation process and can be used to recover iron and manganese metals in the long run. The comparison of monolayer adsorption capacity using for Pb2+ ion and MB dye are as ((untreated SW: 29.41, 1.05); (NaOH treated: 21.74, 100); (Nitric Acid treated: 16.67, 142.86); (Citric Acid treated: 40, 125); (Nitric/Citric Acids treated: 15.63, 111.11) and (Nitric/Citric Acids/NaOH treated: 15.15, 83.33)), respectively. Higher adsorption capacity and re-generable properties of this adsorbent suggest the usage of this natural and abundant mine waste to treat wastewater containing toxic elements and dyes.
Water pollution is one of the most concerning global environmental problems in this century with the severity and complexity of the issue increases every day. One of the major contributors to water pollution is the discharge of harmful heavy metal wastes into the rivers and water bodies. Without proper treatment, the release of these harmful inorganic waste would endanger the environment by contaminating the food chains of living organisms, hence, leading to potential health risks to humans. The adsorption method has become one of the cost-effective alternative treatments to eliminate heavy metal ions. Since the type of adsorbent material is the most vital factor that determines the effectiveness of the adsorption, continuous efforts have been made in search of cheap adsorbents derived from a variety of waste materials. Fruit waste can be transformed into valuable products, such as biochar, as they are composed of many functional groups, including carboxylic groups and lignin, which is effective in metal binding. The main objective of this study was to review the potential of various types of fruit wastes as an alternative adsorbent for Pb(II) removal. Following a brief overview of the properties and effects of Pb(II), this study discussed the equilibrium isotherms and adsorption kinetic by various adsorption models. The possible adsorption mechanisms and regeneration study for Pb(II) removal were also elaborated in detail to provide a clear understanding of biochar produced using the pyrolysis technique. The future prospects of fruit waste as an adsorbent for the removal of Pb(II) was also highlighted.
The differential production cross sections of B^{±} mesons are measured via the exclusive decay channels B^{±}→J/ψK^{±}→μ^{+}μ^{-}K^{±} as a function of transverse momentum in pp and Pb-Pb collisions at a center-of-mass energy sqrt[s_{NN}]=5.02 TeV per nucleon pair with the CMS detector at the LHC. The pp(Pb-Pb) data set used for this analysis corresponds to an integrated luminosity of 28.0 pb^{-1} (351 μb^{-1}). The measurement is performed in the B^{±} meson transverse momentum range of 7 to 50 GeV/c, in the rapidity interval |y|<2.4. In this kinematic range, a strong suppression of the production cross section by about a factor of 2 is observed in the Pb-Pb system in comparison to the expectation from pp reference data. These results are found to be roughly compatible with theoretical calculations incorporating beauty quark diffusion and energy loss in a quark-gluon plasma.
This study is aimed to assess the heavy metals contamination and health risk in Shrimp (Macrobrachium rosenbergii and Penaeus monodon) collected from Khulna-Satkhira region in Bangladesh. The results showed that the Pb concentrations (0.52-1.16 mg/kg) in all shrimp samples of farms were higher than the recommended limit. The Cd levels (0.05-0.13 mg/kg) in all samples and Cr levels in all farms except tissue content at Satkhira farm were higher than the permissible limits. The individual concentration of Pb, Cd, and Cr between shrimp tissue and shell in all rivers and farms were not statistically significant (P > 0.05). Target hazard quotient (THQ) and hazard index (HI) were estimated to assess the non-carcinogenic health risks. Shrimp samples from all locations under the current study were found to be safe for consumption, the possibility of health risk associated with non-carcinogenic effect is very low for continuous consumption for 30 years.
In this work, batch adsorption experiments were carried out to investigate the suitability of prepared acid activated carbons in removing heavy metal ions such as nickel(II), lead(II) and chromium(VI). Acid activated carbons were obtained from oil palm and coconut shells using phosphoric acid under similar activation process while the differences lie either in impregnation condition or in both pretreatment and impregnation conditions. Prepared activated carbons were modified by dispersing hydrated iron oxide. The adsorption equilibrium data for nickel(II) and lead(II) were obtained from adsorption by the prepared and commercial activated carbons. Langmuir and Freundlich models fit the data well. Prepared activated carbons showed higher adsorption capacity for nickel(II) and lead(II). The removal of chromium(VI) was studied by the prepared acid activated, modified and commercial activated carbons at different pH. The isotherms studies reveal that the prepared activated carbon performs better in low concentration region while the commercial ones in the high concentration region. Thus, a complete adsorption is expected in low concentration by the prepared activated carbon. The kinetics data for Ni(II), Pb(II) and Cr(VI) by the best selected activated carbon fitted very well to the pseudo-second-order kinetic model.
Fifty-five core marine sediments from three locations at South China Sea and one location each at Sulu Sea and Sulawesi Sea of coastal East Malaysia were analyzed for heavy metals by instrumental neutron activation analysis and inductively coupled plasma mass spectroscopy. The enrichment factor and the modified degree of contamination were used to calculate the anthropogenic and pollution status of the elements in the samples. The enrichment factor of As, Cd, Cr, Cu, Ni, Pb, and Zn varied from 0.42-4.26, 0.50-2.34, 0.31-0.82, 0.20-0.61, 0.91-1.92, 0.23-1.52, and 0.90-1.28, respectively, with the modified degree of contamination values below 0.6. Comparative data showed that coastal East Malaysia has low levels of contamination.