Displaying publications 121 - 140 of 285 in total

Abstract:
Sort:
  1. Investigation of reverse ionic diffusion in forward-osmosis-aided dewatering of microalgae: A molecular dynamics study
    Itliong JN, Villagracia ARC, Moreno JLV, Rojas KIM, Bernardo GPO, David MY, et al.
    Bioresour Technol, 2019 May;279:181-188.
    PMID: 30731357 DOI: 10.1016/j.biortech.2019.01.109
    This study aimed to investigate the transport mechanisms of ions during forward-osmosis-driven (FO-driven) dewatering of microalgae using molecular dynamics (MD) simulations. The dynamical and structural properties of ions in FO systems of varying NaCl or MgCl2 draw solution (DS) concentrations were calculated and correlated. Results indicate that FO systems with higher DS concentration caused ions to have lower hydration numbers and higher coordination numbers leading to lower diffusion coefficients. The higher hydration number of Mg2+ ions resulted in significantly lower ionic permeability as compared to Na+ ions at all concentrations (p = 0.002). The simulations also revealed that higher DS concentrations led to higher accumulation of ions in the membrane. This study provides insights on the proper selection of DS for FO systems.
    Matched MeSH terms: Sodium Chloride
  2. Impact of molecular structure, headgroup and alkyl chain geometry, on the adsorption of the anionic ester sulfonate surfactants at the air-solution interface, in the presence and absence of electrolyte
    Wang Z, Li P, Ma K, Chen Y, Campana M, Penfold J, et al.
    J Colloid Interface Sci, 2019 May 15;544:293-302.
    PMID: 30861434 DOI: 10.1016/j.jcis.2019.03.011
    The transition from monolayer to multilayer adsorption at the air-water interface in the presence of multivalent counterions has been demonstrated for a limited range of anionic surfactants which exhibit increased tolerance to precipitation in the presence of multivalent counterions. Understanding the role of molecular structure in determining the transition to surface ordering is an important aspect of the phenomenon. The focus of the paper is on the alkyl ester sulfonate, AES, surfactants; a promising group of anionic surfactants, with the potential for improved performance and biocompatibility. Neutron reflectivity measurements were made in aqueous solution and in the presence of NaCl, CaCl2, MgCl2 and AlCl3, for a range of alkyl ester sulfonate surfactants, in which the headgroup and alkyl chain geometries were manipulated. In the regions of monolayer adsorption changing the AES headgroup and alkyl chain geometries results in an increased saturation adsorption and in a more gradual decrease in the adsorption at low concentrations, consistent with a greater adsorption efficiency. Changing the AES headgroup and alkyl chain geometries also results in changes in the transition from monolayer adsorption to more ordered surface structures with the addition of AlCl3 and mixed multivalent electrolytes. A more limited surface layering is observed for the ethyl ester sulfonate, EES, with a C14 alkyl chain. Replacing the C14 alkyl chain with a C18 isostearic chain results in only monolayer adsorption. The results demonstrate the role and importance of the surfactant molecular structure in determining the nature of the surface adsorption in the presence of different electrolytes, and in the tendency to form extended surface multilayer structures.
    Matched MeSH terms: Sodium Chloride
  3. In Vitro Evaluation of Potential Probiotic Strain Lactococcus lactis Gh1 and Its Bacteriocin-Like Inhibitory Substances for Potential Use in the Food Industry
    Jawan R, Abbasiliasi S, Mustafa S, Kapri MR, Halim M, Ariff AB
    Probiotics Antimicrob Proteins, 2021 04;13(2):422-440.
    PMID: 32728855 DOI: 10.1007/s12602-020-09690-3
    Determination of a microbial strain for the joining into sustenance items requires both in vitro and in vivo assessment. A newly isolated bacteriocin-like inhibitory substance (BLIS) producing lactic acid bacterium, Lactococcus lactis Gh1, was isolated from a traditional flavour enhancer and evaluated in vitro for its potential applications in the food industry. Results from this study showed that L. lactis was tolerant to NaCl (≤ 4.0%, w/v), phenol (≤ 0.4%, w/v), 0.3% (w/v) bile salt, and pH 3. BLIS from L. lactis showed antimicrobial activity against Listeria monocytogenes ATCC 15313 and was susceptible to 10 types of antibiotics. The absence of haemolytic activity and the presence of acid phosphatase and naphthol-AS-BI-phosphohydrolase were observed in L. lactis. L. lactis could coagulate milk and showed a negative response to amylolytic and proteolytic activities and did not secrete β-galactosidase. The antimicrobial activity of BLIS was completely abolished at 121 °C. The BLIS was conserved at 4 °C in BHI and MRS medium up to 6-4 months, respectively. BLIS activity was more stable in BHI as compared to MRS after four freeze-thaw cycles and was not affected by a wide range of pH (pH 4-8). BLIS was sensitive to proteinase k and resistant to catalase and trypsin. The antimicrobial activity was slightly reduced by acetone, ethanol, methanol, and acetonitrile at 10% (v/v) and also towards Tween-80, urea, and NaCl 1% (v/v). Results from this study have demonstrated that L. lactis has a vast potential to be applied in the food industry, such as for the preparation of starter culture, functional foods, and probiotic products.
    Matched MeSH terms: Sodium Chloride
  4. Fulltext Statistical Optimization for Acid Hydrolysis of Microcrystalline Cellulose and Its Physiochemical Characterization by Using Metal Ion Catalyst
    Karim MZ, Chowdhury ZZ, Hamid SBA, Ali ME
    Materials (Basel), 2014 Oct 13;7(10):6982-6999.
    PMID: 28788226 DOI: 10.3390/ma7106982
    Hydrolyzing the amorphous region while keeping the crystalline region unaltered is the key technology for producing nanocellulose. This study investigated if the dissolution properties of the amorphous region of microcrystalline cellulose can be enhanced in the presence of Fe(3+) salt in acidic medium. The process parameters, including temperature, time and the concentration of metal chloride catalyst (FeCl₃), were optimized by using the response surface methodology (RSM). The experimental observation demonstrated that temperature and time play vital roles in hydrolyzing the amorphous sections of cellulose. This would yield hydrocellulose with higher crystallinity. The factors that were varied for the production of hydrocellulose were the temperature (x₁), time (x₂) and FeCl₃ catalyst concentration (x₃). Responses were measured in terms of percentage of crystallinity (y₁) and the yield (y₂) of the prepared hydrocellulose. Relevant mathematical models were developed. Analysis of variance (ANOVA) was carried out to obtain the most significant factors influencing the responses of the percentage of crystallinity and yield. Under optimum conditions, the percentage of crystallinity and yield were 83.46% and 86.98% respectively, at 90.95 °C, 6 h, with a catalyst concentration of 1 M. The physiochemical characteristics of the prepared hydrocellulose were determined in terms of XRD, SEM, TGA and FTIR analyses. The addition of FeCl₃ salt in acid hydrolyzing medium is a novel technique for substantially increasing crystallinity with a significant morphological change.
    Matched MeSH terms: Sodium Chloride
  5. Fulltext Physicochemical characteristics of gummy added with sutchi catfish (Pangasius hypophthalmus) gelatin
    Normah, I.
    International Food Research Journal, 2015;22(3):1059-1066.
    MyJurnal
    Gelatin from sutchi catfish (Pangasius hypophthalmus) skin was extracted and applied in the preparation of gummy in order to determine the suitability of sutchi catfish gelatin in gummy production. The skin was subjected to pre-treatment in the following sequence; 0.8M NaCl, 0.19 N NaOH followed by 0.12 N acetic acid prior to 12 hours extraction in distilled water at 50oC. The physicochemical characteristics of sutchi catfish gelatin was analysed and compared with the commercial bovine gelatin. Gummy added with sutchi catfish gelatin was also compared with gummy added with commercial gelatin. Analysis comprises of yield, gel strength, setting point and setting time, amino acid composition, texture profile analysis and sensory evaluation. The extraction resulted in 14.47% yield of gelatin. Sutchi catfish gelatin showed higher gel strength value (360.86 g) compared to the commercial gelatin (217.37 g) which is in accordance with proline content. Texture profile analysis showed that gummies prepared using sutchi catfish gelatin had significantly higher (p
    Matched MeSH terms: Sodium Chloride
  6. Impact of different dietary sodium reduction strategies on blood pressure: a systematic review
    Lai JS, Aung YN, Khalid Y, Cheah SC
    Hypertens Res, 2022 Nov;45(11):1701-1712.
    PMID: 35986189 DOI: 10.1038/s41440-022-00990-5
    High sodium intake was found to be associated with increased blood pressure. Decreasing dietary sodium intake can effectively reduce blood pressure, especially among hypertensive individuals, but the extent of reduction remains debatable. The effectiveness of different sodium reduction strategies on blood pressure reduction was identified in the current review. Randomized controlled trials and clinical trials on dietary sodium intake and blood pressure published from 23 March 2008 to 23 March 2021 were collected from the PubMed database. Twenty-six studies were included and divided into four subgroups based on the types of interventions identified. Subgroups included a low-sodium diet (1) in a group with or without added sodium, (2) through food substitutes, (3) through health education and behavior change, and (4) through salt substitutes. Reduction of dietary sodium intake resulted in a mean difference of 4.51 mmHg (95% CI: 3.35-5.67) in systolic blood pressure and 2.42 mmHg (95% CI: 1.61-3.23) in diastolic blood pressure. The effectiveness of these strategies was approximated from the difference in 24-h urinary sodium excretion between the intervention and control groups, which was 53.74 mmol/day (95% CI: 31.95-75.53). When analyzed, the low-sodium diet without added sodium showed the greatest significant differences in blood pressure (7.58/4.01 mmHg) and 24-h urinary sodium excretion (101.49 mmol/day), whereas the low-sodium diet through food substitutes yielded the lowest significant differences in blood pressure (2.26/0.81 mmHg) and 24-h urinary sodium excretion (25.78 mmol/day). Thus, reducing sodium intake can be an effective strategy for the prevention and treatment of hypertension.
    Matched MeSH terms: Sodium Chloride, Dietary
  7. Fulltext Risk factors related with high sodium intake among Malaysian adults: findings from the Malaysian Community Salt Survey (MyCoSS) 2017-2018
    Abdul Aziz NS, Ambak R, Othman F, He FJ, Yusof M, Paiwai F, et al.
    J Health Popul Nutr, 2021 05 31;40(Suppl 1):14.
    PMID: 34059146 DOI: 10.1186/s41043-021-00233-2
    BACKGROUND: High sodium intake was an established risk factor for stroke and cardiovascular diseases. The objective of this study was to investigate factors associated with high sodium intake based on 24-h urinary sodium excretion from the MyCoSS study.

    METHODS: The cross-sectional survey was conducted among adults aged 18 years and above in Malaysia. A multi-stage stratified sampling was used to represent nationally. Twenty-four-hour urine was collected from a total of 900 respondents. Indirect ion-selective electrode (ISE) method was used to measure sodium intake. Descriptive and logistic regression analysis was applied to determine factors associated with high sodium intake based on 24-h urinary sodium excretion.

    RESULTS: A total of 798 respondents (76% response rate) completed the 24-h urine collection process. Logistic regression revealed that high sodium intake associated with obese [aOR 2.611 (95% CI 1.519, 4.488)], male [aOR 2.436 (95% CI 1.473, 4.030)], having a waist circumference of > 90cm for adult males [aOR 2.260 ( 95% CI 1.020, 5.009) and >80cm for adult females [aOR 1.210 (95% CI 0.556, 2.631)], being a young adult [aOR 1.977 (95% CI 1.094, 3.574)], and living in urban areas [aOR 1.701 (95% CI 1.094, 2.645)].

    CONCLUSION: Adults who are obese, have a large waist circumference, of male gender, living in urban areas, and belonging to the young adult age group were found to have higher sodium intake than other demographic groups. Hence, reduction of salt consumption among these high-risk groups should be emphasised to reduce the risk of cardiovascular diseases.

    Matched MeSH terms: Sodium Chloride, Dietary
  8. Analysis of Condition Index in Polymesoda expansa (Mousson 1849)
    Abdul Rahim A, Idris MH, Kamal AH, Wong SK, Arshad A
    Pak J Biol Sci, 2012 Jul 01;15(13):629-34.
    PMID: 24218932
    The Condition Index (CI) is a method to measure overall health of fish and that has been applied to estimate the effect that different environmental factors have on clam meat quality. The CI of local mangrove clam Polymesoda expansa in Kelulit, Miri Sarawak was determined from October 2010 to November 2011. Condition index that is generally used to characterize the physiological activity of organisms, varied from 1.8% in December 2010 to 3.4% in October 2011, with low values observed during the spawning period. The clam attained their best condition in quality of flesh weight during July-October. In present study, the CI showed a clear relationship with the reproductive cycle of P. expansa. However, no significant correlation (p > 0.05) was found between CI and the different physicochemical parameter of seawater. The data presented is necessary for developing sustainable management strategies and broodstock selection for the species which is crucial in aquaculture development.
    Matched MeSH terms: Sodium Chloride
  9. Parametric study of novel plant-based seed coagulant in modeled wastewater turbidity removal
    Owodunni AA, Ismail S, Olaiya NG
    Environ Sci Pollut Res Int, 2023 Dec;30(60):124677-124685.
    PMID: 35678970 DOI: 10.1007/s11356-022-21353-0
    Chemical coagulants like alum, ferric salts, and polyacrylamide derivatives are helpful in water treatment. However, the long-term detrimental effects of chemical coagulants on humans and the environment require alternative research for natural coagulants. This study used novel leguminous (green beans (GB), pigeon pea (PP)), fruit seeds (Tamarind indica (TI), and date palm (DS)) as coagulants to remove turbidity. The seeds were powdered, and the crude active coagulants were extracted with distilled water and a 1 M NaCl solution. The result showed that PP's distilled water extract had the highest turbidity removal of 81.12%, while DS had the least performance of 62.54%. The NaCl extract of PP had the highest removal (94.62%), followed by TI (76.08%). This study found the optimum doses for GB, TI, PP, and DS to be 50, 40, 10, and 70 mL/L, with their optimum pH at 3, 1, 3, and 1, respectively. The FTIR spectra confirmed the existence of -OH, -NH, COOH, C = O, C-C, and C-H peaks, indicating the presence of protein-specific functional groups supporting their potential use as coagulants. Therefore, PP would have been used based on turbidity performance; however, due to their nutritional value, TI and DS are suitable seeds for the coagulation-flocculation treatment of turbid water because they are waste materials.
    Matched MeSH terms: Sodium Chloride
  10. Inverse vulcanization induced oxygen modified porous polysulfides for efficient sorption of heavy metals
    Lyu S, Abidin ZZ, Yaw TCS, Resul MFMG
    Environ Sci Pollut Res Int, 2024 Mar;31(11):16940-16957.
    PMID: 38326685 DOI: 10.1007/s11356-024-32323-z
    The applications of polysulfides derived from natural plant oil and sulfur via the inverse vulcanization in the removal of heavy metals from aqueous solutions suffered from their low porosity and scarce surface functionality because of their hydrophobic surfaces and bulk characteristics. In this study, polysulfides from sulfur and palm oil (PSPs) with significantly enhanced porosity (13.7-24.1 m2/g) and surface oxygen-containing functional groups (6.9-8.6 wt.%) were synthesized with the optimization of process conditions including reaction time, temperature, and mass ratios of sulfur/palm oil/NaCl/sodium citrate. PSPs were applied as sorbents to remove heavy metals present in aqueous solutions. The integration of porosity and oxygen modification allowed a fast kinetic (4.0 h) and enhanced maximum sorption capacities for Pb(II) (218.5 mg/g), Cu(II) (74.8 mg/g), and Cr(III) (68.4 mg/g) at pH 5.0 and T 298 K comparing with polysulfides made without NaCl/sodium citrate. The sorption behaviors of Pb(II), Cu(II), and Cr(III) on PSPs were highly dependent on the solution pH values and ionic strength. The sorption presented excellent anti-interference capability for the coexisting cations and anions. The sorption processes were endothermic and spontaneous. This work would guide the preparation of porous polysulfides with surface modification as efficient sorbents to remediate heavy metals from aqueous solutions.
    Matched MeSH terms: Sodium Chloride
  11. Vortex- and CO2 -gas-assisted liquid-liquid microextraction with salt addition for the high-performance liquid chromatographic determination of furanic compounds in concentrated juices and dried fruits
    Abu-Bakar NB, Makahleh A, Saad B
    J Sep Sci, 2016 Mar;39(5):947-55.
    PMID: 26718308 DOI: 10.1002/jssc.201501109
    A novel microextraction method based on vortex- and CO2 -assisted liquid-liquid microextraction with salt addition for the isolation of furanic compounds (5-hydroxymethyl-2-furaldehyde, 5-methyl-2-furaldehyde, 2-furaldehyde, 3-furaldehyde, 2-furoic and 3-furoic acids) was developed. Purging the sample with CO2 was applied after vortexing to enhance the phase separation and mass transfer of the analytes. The optimum extraction conditions were: extraction solvent (volume), propyl acetate (125 μL); sample pH, 2.4; vortexing time, 45 s; salt concentration, 25% w/v and purging time, 5 min. The analytes were separated using an ODS Hypersil C18 column (250×4.6 mm i.d, 5 μm) under gradient flow. The proposed method showed good linearities (r(2) >0.999), low detection limits (0.08-1.9 μg/L) and good recoveries (80.7-122%). The validated method was successfully applied for the determination of the furanic compounds in concentrated juice (mango, date, orange, pomegranate, roselle, mangosteen and soursop) and dried fruit (prune, date and apricot paste) samples.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  12. Fulltext Proteomic analysis of the salt-responsive leaf and root proteins in the anticancer plant Andrographis paniculata Nees
    Talei D, Valdiani A, Rafii MY, Maziah M
    PLoS One, 2014;9(11):e112907.
    PMID: 25423252 DOI: 10.1371/journal.pone.0112907
    Separation of proteins based on the physicochemical properties with different molecular weight and isoelectric points would be more accurate. In the current research, the 45-day-old seedlings were treated with 0 (control) and 12 dS m(-1) of sodium chloride in the hydroponic system. After 15 days of salt exposure, the total protein of the fresh leaves and roots was extracted and analyzed using two-dimensional electrophoresis system (2-DE). The analysis led to the detection of 32 induced proteins (19 proteins in leaf and 13 proteins in the root) as well as 12 upregulated proteins (four proteins in leaf and eight proteins in the root) in the salt-treated plants. Of the 44 detected proteins, 12 were sequenced, and three of them matched with superoxide dismutase, ascorbate peroxidase and ribulose-1, 5-bisphosphate oxygenase whereas the rest remained unknown. The three known proteins associate with plants response to environmental stresses and could represent the general stress proteins in the present study too. In addition, the proteomic feedback of different accessions of A. paniculata to salt stress can potentially be used to breed salt-tolerant varieties of the herb.
    Matched MeSH terms: Sodium Chloride/pharmacology
  13. Effect of salt stress on morpho-physiology, vegetative growth and yield of rice
    Hakim MA, Juraimi AS, Hanafi MM, Ali E, Ismail MR, Selamat A, et al.
    J Environ Biol, 2014 Mar;35(2):317-26.
    PMID: 24665756
    Selection of salt tolerant rice varieties has a huge impact on global food supply chain. Five Malaysian rice (Oryza sativa L.) varieties, MR33, MR52, MR211, MR219 and MR232 were tested in pot experiment under different salinity levels for their response in term of vegetative growth, physiological activities, development of yield components and grain yield. Rice varieties, BRRI dhan29 and IR20 were used as a salt-sensitive control and Pokkali was used as a salt-tolerant control. Three different salinity levels viz. 4, 8, and 12 dS m(-1) were used in a randomized complete block design with four replications under glass house conditions. Two Malaysia varieties, MR211 and MR232 performed better in terms of vegetative growth (plant height, leaf area plant(-1), number of tillers plant(-1), dry matter accumulation plant(-1)), photosynthetic rate, transpiration rate, yield components, grain yield and injury symptoms. While, MR33, MR52 and MR219 verities were able to withstand salinity stress over salt-sensitive control, BRRI dhan29 and IR20.
    Matched MeSH terms: Sodium Chloride/pharmacology*
  14. Fulltext Physiological and growth responses of six turfgrass species relative to salinity tolerance
    Uddin K, Juraimi AS, Ismail MR, Hossain A, Othman R, Abdul Rahim A
    ScientificWorldJournal, 2012;2012:905468.
    PMID: 22666166 DOI: 10.1100/2012/905468
    The demand for salinity-tolerant turfgrasses is increasing due to augmented use of effluent or low-quality water (sea water) for turf irrigation and the growing turfgrass industry in coastal areas. Experimental plants, grown in plastic pots filled with a mixture of river sand and KOSAS(R) peat (9 : 1), were irrigated with sea water at different dilutions imparting salinity levels of 0, 8, 16, 24, 32, 40, or 48 dS m⁻¹. Salinity tolerance was evaluated on the basis of leaf firing, shoot and root growth reduction, proline content, and relative water content. Paspalum vaginatum was found to be most salt tolerant followed by Zoysia japonica and Zoysia matrella, while Digitaria didactyla, Cynodon dactylon "Tifdwarf," and Cynodon dactylon "Satiri" were moderately tolerant. The results indicate the importance of turfgrass varietal selection for saline environments.
    Matched MeSH terms: Sodium Chloride/pharmacology*
  15. Recovery of synthetic dye from simulated wastewater using emulsion liquid membrane process containing tri-dodecyl amine as a mobile carrier
    Othman N, Zailani SN, Mili N
    J Hazard Mater, 2011 Dec 30;198:103-12.
    PMID: 22023906 DOI: 10.1016/j.jhazmat.2011.10.014
    The extraction of Red 3BS reactive dye from aqueous solution was studied using emulsion liquid membrane (ELM). ELM is one of the processes that have very high potential in treating industrial wastewater consisting of dyes. In this research, Red 3BS reactive dye was extracted from simulated wastewater using tridodecylamine (TDA) as the carrier agent, salicyclic acid (SA) to protonate TDA, sodium chloride as the stripping agent, kerosene as the diluent and SPAN 80 as emulsifier. Experimental parameters investigated were salicyclic acid concentration, extraction time, SPAN 80 concentration, sodium chloride concentration, TDA concentration, agitation speed, homogenizer speed, emulsifying time and treat ratio. The results show almost 100% of Red 3BS was removed and stripped in the receiving phase at the optimum condition in this ELM system. High voltage coalesce was applied to break the emulsion hence, enables recovery of Red 3BS in the receiving phase.
    Matched MeSH terms: Sodium Chloride/chemistry
  16. Relative salinity tolerance of warm season turfgrass species
    Uddin KM, Juraimi AS, Ismail MR, Othman R, Rahim AA
    J Environ Biol, 2011 May;32(3):309-12.
    PMID: 22167942
    Fresh water, coupled with soil salinization in many areas has resulted in an increased need forscreening of salt tolerant turf grasses. Relative salinity tolerance of eightwarm season turfgrass species were examined in this study in sand culture. Grasses were grown in a glasshouse, irrigated with either distilled water or saline sea water adjusted to 24, 48 or 72 dSm-1. Salt tolerances of the grasses were assessed on the basis of their shoot and root growth, leaf firing and turf quality. Regression analysis indicated that Zoysiajaponica (Japanese lawn grass) (JG), Stenotaphrum secundatum (St. Augustine) (SA), Cynodon dactylon (satiri) (BS), Zoysia teneuifolia (Korean grass) (KG), Digitaria didactyla (Serangoon grass) (SG), Cynodon dactylon (Tifdwarf) (TD), Paspalum notatum (Bahia grass) (BG) and Axonopus compressus(Pearl blue) (PB) suffered a 50% shoot growth reduction at 36.0, 31.8, 30.9, 28.4, 26.4, 25.7, 20.0 and 18.6 dSm1 of salinity, respectively and a root growth reduction at44.9, 43.7, 33.4, 31.0, 29.5 27.5, 21.5 and 21.4 dSm- of salinity, respectively. Leaf firing and turf quality of the selected species, as a whole, were also found to be affected harmoniously with the change in root and shoot growth. On the basis of the experimental results the selected species were ranked for salinity tolerance as JG>SA>BS>KG>SG >TD>BG>PB.
    Matched MeSH terms: Sodium Chloride/toxicity*
  17. The formation and characterisation of an asymmetric nanofiltration membrane for ammonia-nitrogen removal: effect of shear rate
    Ali N, Halim NS, Jusoh A, Endut A
    Bioresour Technol, 2010 Mar;101(5):1459-65.
    PMID: 19786347 DOI: 10.1016/j.biortech.2009.08.070
    The focus of this research is to study the potential of nanofiltration membrane technology in removing ammonia-nitrogen from the aquaculture system. One of the major fabrication parameters that directly affect the separation performance is shear rate or casting rate during membrane fabrication. In this study, asymmetric polyethersulfone (PES) nanofiltration membranes were prepared at five different shear rates within the range of 67-400 s(-1). Membrane productivity and separation performance were assessed via pure water, salt and ammonia-nitrogen permeation experiments, and their structural properties were determined by employing the combination of the irreversible thermodynamic (IT) model, solution diffusion model, steric hindrance pore (SHP) model and Teorell-Meyers (TMS) model. The study reveals that the alteration of shear rate enormously affects the membrane morphology and structural parameters, hence subsequently significantly influencing the membrane performance. It was found that, membrane produced at the shear rate 200 s(-1) or equivalent to 10s of casting speed during membrane fabrications managed to remove about 68% of ammonia-nitrogen, in which its separation performance is the most favourable by means of highest flux and rejection ability towards unwanted solutes. Besides, from the research findings, nano-membrane technology is a potential candidate for the treatment of aquaculture wastewater.
    Matched MeSH terms: Sodium Chloride/chemistry
  18. Effects of some environmental parameters on the reproduction and development of a tropical marine harpacticoid copepod Nitocra affinis f. californica Lang
    Matias-Peralta H, Yusoff FM, Shariff M, Arshad A
    Mar Pollut Bull, 2005;51(8-12):722-8.
    PMID: 16291188
    The effects of salinity, temperature, and light conditions on the reproduction and development of harpacticoid copepod, Nitocra affinis f. californica under controlled laboratory conditions were determined. Seven different salinity levels (5, 10, 15, 20, 25, 30, 35 ppt), four temperatures (20, 25, 30, 35 degrees C), three different light intensities (25, 56, 130 micromol m(-2) s(-1)) and photoperiods (24 h:0 h, 1 h:23 h, 12 h:12 h LD cycle) were employed in this study. The highest (p < 0.05) overall reproduction and fastest development time were achieved by copepods reared under 30-35 ppt salinity. The optimum temperature required for the maximum reproduction was 30 degrees C while under 30 degrees C and 35 degrees C the copepod development time was shortest (p < 0.05) compared to other temperature levels. The overall reproduction was highest (p < 0.05) and development rate of N. affinis was shortest (p < 0.05) under lowest light intensity (25 micromol m(-2) s(-1)). Continuous light (24 h:0 h LD) inhibited the egg production while, continuous darkness (1 h:23 h LD) and 12 h:12 h LD significantly favoured the overall reproductive activity of the female. Photoperiods 1 h:23 h and 12 h:12 h LD yielded highest total (p < 0.05) offspring female(-1) coupled with highest (p < 0.05) survival percentage. This study illustrated that although N. affinis can tolerate wide range of environmental conditions, prolonged exposure to subnormal environments affect its reproduction and development. This study showed that this species can be mass cultured for commercial purposes and has a potential to be used for toxicity studies due to its high reproductive performance fast development and a wide range of tolerance to environmental conditions.
    Matched MeSH terms: Sodium Chloride/analysis*
  19. Characterization of partitioning behaviors of immunoglobulin G in polymer-salt aqueous two-phase systems
    Chow YH, Yap YJ, Show PL, Juan JC, Anuar MS, Ng EP, et al.
    J Biosci Bioeng, 2016 Nov;122(5):613-619.
    PMID: 27233672 DOI: 10.1016/j.jbiosc.2016.04.008
    The partitioning behavior of immunoglobulin G (IgG) in the aqueous two-phase system (ATPS) composed of poly(ethylene glycol) (PEG) and phosphate was studied. The parameters of ATPS exhibiting the pronounced effects on the partitioning behavior of IgG include phase composition, PEG molecular weight, and the addition of sodium chloride (NaCl). The accumulation of IgG at the interface of the ATPS increased drastically as the tie-line length (TLL) was increased. This trend was correlated with a linear relationship relating the natural logarithm of interfacial partition coefficient (ln G) to the difference of PEG concentration between the top phase and the bottom phase (Δ[PEG]), and a good fit was obtained. An attempt was made to correlate the natural logarithm of partition coefficient (ln K) to the presence of NaCl with the proposed linear relationship, ln K = α″ ln [Cl(-)] + β″. The proposed relationship, which serves as a better description of the underlying mechanics of the protein partitioning behavior in the polymer-salt ATPS, provides a good fit (r(2) > 0.95) for the data of IgG partitioning. An optimum recovery of 99.97% was achieved in an ATPS (pH 7.5) composed of 14.0% (w/w) PEG 1450, 12.5% (w/w) phosphate and 5.0% (w/w) NaCl.
    Matched MeSH terms: Sodium Chloride/chemistry*
  20. TiO₂ nanoparticle transport and retention through saturated limestone porous media under various ionic strength conditions
    Esfandyari Bayat A, Junin R, Derahman MN, Samad AA
    Chemosphere, 2015 Sep;134:7-15.
    PMID: 25889359 DOI: 10.1016/j.chemosphere.2015.03.052
    The impact of ionic strength (from 0.003 to 500mM) and salt type (NaCl vs MgCl2) on transport and retention of titanium dioxide (TiO2) nanoparticles (NPs) in saturated limestone porous media was systematically studied. Vertical columns were packed with limestone grains. The NPs were introduced as a pulse suspended in aqueous solutions and breakthrough curves in the column outlet were generated using an ultraviolent-visible spectrometry. Presence of NaCl and MgCl2 in the suspensions were found to have a significant influence on the electrokinetic properties of the NP aggregates and limestone grains. In NaCl and MgCl2 solutions, the deposition rates of the TiO2-NP aggregates were enhanced with the increase in ionic strength, a trend consistent with traditional Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Furthermore, the NP aggregates retention increased in the porous media with ionic strength. The presence of salts also caused a considerable delay in the NPs breakthrough time. MgCl2 as compared to NaCl was found to be more effective agent for the deposition and retention of TiO2-NPs. The experimental results followed closely the general trends predicted by the filtration and DLVO calculations. Overall, it was found that TiO2-NP mobility in the limestone porous media depends on ionic strength and salt type.
    Matched MeSH terms: Sodium Chloride/chemistry
Related Terms
Filters
Contact Us

Please provide feedback to Administrator ([email protected])

External Links