MyMedR

Displaying publications 101 - 120 of 138 in total

Abstract:

Sort:

Characterization of Aquimarina hainanensis isolated from diseased mud crab Scylla serrata larvae in a hatchery

Midorikawa Y, Shimizu T, Sanda T, Hamasaki K, Dan S, Lal MTBM, et al.

J Fish Dis, 2020 May;43(5):541-549.
PMID: 32147853 DOI: 10.1111/jfd.13151

Mass mortality due to necrosis signs occurred in hatchery-reared zoea stage larvae of the mud crab Scylla serrata in Okinawa, Japan, and a causative bacterium was isolated. In this study, we identified and characterized the bacterium by genome analysis, biochemical properties and pathogenicity. The bacterium was a Gram-negative, non-motile, long rod, forming yellow colonies on a marine agar plate. It grew at 20-33°C (not at 37°C) and degraded chitin and gelatin. Phylogenetic analysis of the 16S rRNA gene sequence identified the bacterium as Aquimarina hainanensis. Genome sequence data obtained from Illumina MiSeq generated 29 contigs with 3.56 Mbp in total length and a G + C content of 32.5%. The predicted 16 chitinase genes, as putative virulence factors, had certain homologies with those of genus Aquimarina. Experimental infection with the bacterium conducted on larvae of four crustacean species, brine shrimp Artemia franciscana, freshwater shrimp Caridina multidentata, swimming crab Portunus trituberculatus and mud crab S. serrata, revealed that this bacterium was highly virulent to these species. The present study suggests that the bacterium caused mass mortality in mud crab seed production was A. hainanensis and can be widely pathogenic to crustaceans.

Matched MeSH terms: Gelatin
Isolation methods and culture conditions of human umbilical vein endothelial cells from Malaysian women

Raja Nor Suhaila, Sabreena Safuan

Sains Malaysiana, 2017;46:463-468.

Human umbilical vein endothelial cell (HUVEC) isolated from umbilical cord is widely used as endothelial cell model.
However, HUVEC has been characteristically hard to maintain and showed molecular heterogeneity depending on the
umbilical cord donors. Commercial HUVEC is commonly derived from European and Caucasian population which have
different molecular characteristics from Asian women. This study aimed to optimize the isolation and culture condition of
HUVEC using combinations of growth factors and extracellular matrix components so that the isolated HUVEC will purely
represent the population under study. Umbilical cords were obtained from women post-labour. Different incubation times
and digestive enzymes were used during endothelial cells isolation process. The culture conditions were optimized based
on the coating materials and the media supplements. The results showed that 0.1% collagenase for 40 min incubation
was the optimal isolation condition of HUVEC. HUVEC grown in 0.2% gelatin coated plate with 10% heat-inactivated
fetal calf serum showed higher proliferative capacity and reduced cell death compared to other conditions (p<0.05). The
results generated from this study provide a basic protocol of HUVEC isolation and culture conditions in order to generate
working endothelial cell populations purely represent the Malaysian population.

Matched MeSH terms: Gelatin
Recent advances in the use of animal-sourced gelatine as natural polymers for food, cosmetics and pharmaceutical applications

Mohd Shakrie Palan Abdullah, Mohamed Ibrahim Noordin, Syed Ibrahim Mohd Ismail, Nur Murnisa Mustapha, Malina Jasamai, Ahmad Fuad Shamsuddin, et al.

Sains Malaysiana, 2018;47:323-336.

Gelatine is used as an excipient for various pharmaceutical dosage forms, such as capsule shells (both hard and soft),
tablets, suspensions, emulsions and injections (e.g. plasma expanders). It is also broadly used in various industries
such as food and cosmetics. Gelatine is a biopolymer obtained from discarded or unused materials of bovine, porcine,
ovine, poultry and marine industrial farms. The discarded materials can be the skin, tendons, cartilages, bones and
connective tissues. Gelatine sourced from animals is relatively easy and inexpensive to produce. The potential needs of
gelatine cannot be overemphasised. Rising demands, health concerns and religious issues have heightened the need for
alternative sources of gelatine. This review presents the various industrial uses of gelatine and the latest developments
in producing gelatine from various sources.

Matched MeSH terms: Gelatin
Solubility of core materials in aqueous polymeric solution effect on microencapsulation of curcumin

Aziz HA, Peh KK, Tan YT

Drug Dev Ind Pharm, 2007 Nov;33(11):1263-72.
PMID: 18058323

Curcumin, the main active constituent of turmeric herb (Curcuma longa L.) have been reported to possess many medicinal values. The application of curcumin in dermatological preparations is limited by their intense yellow color property, which stains the fabric and skin. The objectives of this study were to reduce the color staining effect and enhance the stability of curcumin via microencapsulation using gelatin simple coacervation method. As for curcumin, ethanol and acetone were used as coacervating solvents. Curcumin was dispersed in ethanol while dissolved in acetone. Irrespective of the types of coacervating solvents used, microencapsulation resolved the color-staining problem and enhanced the flow properties and photo-stability of curcumin. Nevertheless, it was found that more spherical curcumin microcapsules with higher yield, higher curcumin loading, and higher entrapment efficiency were obtained with acetone than ethanol. The in vitro release of curcumin after microencapsulation was slightly prolonged. Further evaluation of the effects of solubility of core materials in coacervating solvent or polymeric aqueous solution using six different drug compounds, namely, ketoconazole, ketoprofen, magnesium stearate, pseudoephedrine HCl, diclofenac sodium, and paracetamol, suggested that the solubility of core materials in aqueous polymeric solution determined the successful formation of microcapsules. Microcapsules could only be formed if the core materials were not dissolved in the aqueous polymeric solution while the core materials could either be dissolved or dispersed in the coacervating solvent. In summary, microencapsulation not only circumvents the color-staining problem but also improved the stability and flowability of curcumin. The solubility of core material in aqueous polymeric solution plays a pivotal role in determining the successful formation of microcapsules.

Matched MeSH terms: Gelatin
Fulltext Extraction of gelatin from salmon (Salmo salar) fish skin using trypsin-aided process: optimization by Plackett-Burman and response surface methodological approaches

Fan H, Dumont MJ, Simpson BK

J Food Sci Technol, 2017 Nov;54(12):4000-4008.
PMID: 29085142 DOI: 10.1007/s13197-017-2864-5

Gelatin from salmon (Salmo salar) skin with high molecular weight protein chains (α-chains) was extracted using trypsin-aided process. Response surface methodology was used to optimise the extraction parameters. Yield, hydroxyproline content and protein electrophoretic profile via sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of gelatin were used as responses in the optimization study. The optimum conditions were determined as: trypsin concentration at 1.49 U/g; extraction temperature at 45 °C; and extraction time at 6 h 16 min. This response surface optimized model was significant and produced an experimental value (202.04 ± 8.64%) in good agreement with the predicted value (204.19%). Twofold higher yields of gelatin with high molecular weight protein chains were achieved in the optimized process with trypsin treatment when compared to the process without trypsin.

Matched MeSH terms: Gelatin
Fulltext Hydrolysis of native and annealed tapioca and sweet potato starches at subgelatinization temperature using a mixture of amylolytic enzymes

Shariffa, Y.N., Uthumporn, U., Karim, A.A., Zaibunnisa, A.H

International Food Research Journal, 2017;24(5):1925-1933.
MyJurnal

This study investigated the effect of annealing treatment (at 50°C for 72 h) on hydrolysis of tapioca and sweet potato starches using a raw starch hydrolyzing enzyme namely STARGEN 001 (a blend from fungal α-amylase and glucoamylase) at sub-gelatinization temperature (35°C) for 24 h. The degree of hydrolysis of the starches was evaluated based on the dextrose equivalent (DE) value. The hydrolyzed starches were then characterized in terms of its morphology, swelling power and solubility, gelatinization and pasting properties, amylose content and x-ray diffraction pattern. After 24 h of hydrolysis, annealed starches were hydrolyzed to a greater degree with higher DE value compared to native starches (40% vs 33% for tapioca; and 29% vs 24% for sweet potato starch). Scanning electron microscopy (SEM) micrographs revealed a more porous granules and rougher surface in annealed starches than their native counterparts. The swelling power and solubility of annealed starches decreased significantly. Annealing was found to affect the pasting properties of the starches appreciably and increase the starch gelatinization temperature. The amylose content in hydrolyzed annealed tapioca and sweet potato starches increased while no significant changes observed in the X-ray diffraction of those starches. This study shows that the annealing treatment can be used as a way to increase the degree of hydrolysis of tapioca and sweet potato starches at sub-gelatinization temperature using a raw starch hydrolyzing enzyme.

Matched MeSH terms: Gelatin
Fulltext Gel formation of pectin from okra (Abelmoschus esculentus L. Moench) leaves, pulp and seed

Nur Farhana A.R., Amin I., Sadeq Hassan A.S., Shuhaimi M.

International Food Research Journal, 2017;24(5):2161-2169.
MyJurnal

Okra plant particularly its fruit is highly mucilage which composed of pectin and high content of carbohydrate. Byproducts of okra plant such as leaves and matured fruits will be discarded whenever the young fruits are harvested which eventually leads to environmental pollution. Those byproducts have potential to become plant-based alternative for bovine and pork related gelatin. This study aimed to determine the gel formation of pectin extracted from okra plant byproducts particularly the leaves, pulp (skin without seeds) and seeds. Pectin was extracted using a sequential extraction with the applications of hot buffer (HB) and hot buffer with chelating agents (CH). CH extraction gave the highest pectin yield (>40%) compared to HB and DA. The HB fraction harbored highly purified pectin due to high anhydro uronic acid content and degree of esterification. The highest pectin yield was extracted from seeds with an overall fraction yield of 86%, followed by the leaves (75%) and pulp (71%). The pectin was blended with konjac glucomannan (KG) in 5.0:1.6 ratio to form gel and stored for 16 - 18hr at 4°C ± 1.0. The gel formed using HB extraction was found to have significantly lower (p < 0.05) gel strength than HB with CH extraction. This study concluded that HB and CH pectin extracts derived from okra leaves, pulp and seeds have good potential to become gelling agent.

Matched MeSH terms: Gelatin
Fulltext Effect of sorbitol at different concentrations on the functional properties of gelatin/carboxymethyl cellulose (CMC)/chitosan composite films

Bakry, N.F., Isa, M.I.N., Sarbon, N.M.

International Food Research Journal, 2017;24(4):1753-1762.
MyJurnal

This study investigated consequent functional effects (mechanical and physical) on Gelatin/ CMC/Chitosan composite films from the addition of sorbitol. With glycerol as a plasticizer, solutions for Gelatin/CMC/Chitosan composite films containing graduated sorbitol concentrations (0%, 5%, 10%, 15%, 20%, 25% and 30%), were cast on a petri dish and oven dried at 45˚C. The fabricated films were then characterized for tensile strength, elongation at break (EAB) and puncture resistance (mechanical properties); as well as film thickness, water vapor permeability (WVP), thermal properties, light transmittance and transparency (UV and visible light transmission), biodegradability, and X-ray diffraction (physical properties). Results indicated that by increasing sorbitol concentration, melting point and tensile strength decreased overall (p

Matched MeSH terms: Gelatin
Fulltext Fabrication and characterization of gelatin stabilized silver nanoparticles under UV-light

Darroudi M, Ahmad MB, Zak AK, Zamiri R, Hakimi M

Int J Mol Sci, 2011;12(9):6346-56.
PMID: 22016663 DOI: 10.3390/ijms12096346

Silver nanoparticles (Ag-NPs) were successfully synthesized using the UV irradiation of aqueous solutions containing AgNO(3) and gelatin as a silver source and stabilizer, respectively. The UV irradiation times influence the particles' diameter of the Ag-NPs, as evidenced from surface plasmon resonance (SPR) bands and transmission electron microscopy (TEM) images. When the UV irradiation time was increased, the mean size of particles continuously decreased as a result of photoinduced Ag-NPs fragmentation. Based on X-ray diffraction (XRD), the UV-irradiated Ag-NPs were a face-centered cubic (fcc) single crystal without any impurity. This study reveals that the UV irradiation-mediated method is a green chemistry and promising route for the synthesis of stable Ag-NPs for several applications (e.g., medical and surgical devices). The important advantages of this method are that it is cheap, easy, and free of toxic materials.

Matched MeSH terms: Gelatin/chemistry*
Development of gelatin microspheres loaded with diclofenac sodium for intra-articular administration

Saravanan M, Bhaskar K, Maharajan G, Pillai KS

J Drug Target, 2011 Feb;19(2):96-103.
PMID: 20380621 DOI: 10.3109/10611861003733979

We have previously reported on the targeting of diclofenac sodium in joint inflammation using gelatin magnetic microspheres. To overcome complications in the administration of magnetic microspheres and achieve higher targeting efficiency, the present work focuses on the formulation of gelatin microspheres for intra-articular administration. Drug-loaded microspheres were prepared by the emulsification/cross-linking method, characterized by drug loading, size distribution, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), gas chromatography, and in vitro release studies. The targeting efficiency of microspheres was studied in vivo in rabbits. The microspheres showed drug loading of 9.8, 18.3, and 26.7% w/w with an average size range of 37-46 µm, depending upon the drug-polymer ratio. They were spherical in nature and free from surface drug as evidenced by the SEM photographs. FT-IR, DSC, and XRD revealed the absence of drug-polymer interaction and amorphous nature of entrapped drug. Gas chromatography confirms the absences of residual glutaraldehyde. The formulated microspheres could prolong the drug release up to 30 days in vitro. About 81.2 and 43.7% of administered drug in the microspheres were recovered from the target joint after 1 and 7 days of postintra-articular injection, respectively, revealing good targeting efficiency.

Matched MeSH terms: Gelatin/chemistry
Fulltext Enhanced gastrointestinal survivability of recombinant Lactococcus lactis using a double coated mucoadhesive film approach

Tan EW, Tan KY, Phang LV, Kumar PV, In LLA

PLoS One, 2019;14(7):e0219912.
PMID: 31335895 DOI: 10.1371/journal.pone.0219912

Vaccine administration via the oral route is preferable to parenteral routes due to ease of administration. To date, most available oral vaccines comprises of live attenuated pathogens as oppose to peptide-based vaccines due to its low bioavailability within the gastrointestinal (GI) tract. Over the years, probiotic-based peptide delivery vehicles comprising of lactic acid bacteria such as Lactococcus lactis has emerged as an interesting alternative due to its generally recognized as safe (GRAS) status, a fully sequenced genome, transient gut colonization time, and is an efficient cellular factory for heterologous protein production. However, its survivability through the GI tract is low, thus better delivery approaches are being explored to improve its bioavailability. In this study, we employ the incorporation of a double coated mucoadhesive film consisting of sodium alginate and Lycoat RS 720 film as the inner coat. The formulated film exhibits good mechanical properties of tensile strength and percent elongation for manipulation and handling with an entrapment yield of 93.14±2.74%. The formulated mucoadhesive film is subsequently loaded into gelatin capsules with an outer enteric Eudragit L100-55 coating capable of a pH-dependent breakdown above pH 5.5 to protect against gastric digestion. The final product and unprotected controls were subjected to in vitro simulated gastrointestinal digestions to assess its survivability. The product demonstrated enhanced protection with an increase of 69.22±0.67% (gastric) and 40.61±8.23% (intestinal) survivability compared to unprotected controls after 6 hours of sequential digestion. This translates to a 3.5 fold increase in overall survivability. Owing to this, the proposed oral delivery system has shown promising potential as a live gastrointestinal vaccine delivery host. Further studies involving in vivo gastrointestinal survivability and mice immunization tests are currently being carried out to assess the efficacy of this novel oral delivery system in comparison to parenteral routes.

Matched MeSH terms: Gelatin/chemistry
Effect of keratin-gelatin and bFGF-gelatin composite film as a sandwich layer for full-thickness skin mesh graft in experimental dogs

Thilagar S, Jothi NA, Omar AR, Kamaruddin MY, Ganabadi S

J Biomed Mater Res B Appl Biomater, 2009 Jan;88(1):12-6.
PMID: 18161832

Skin grafts are indicated when there is a major loss of skin. Full-thickness skin graft is an ideal choice to reconstruct defect of irregular surface that is difficult to immobilize. Full-thickness mesh grafts can be applied to patch large skin defect when there is less donor site in extensively traumatized and burned surgical patients. The concept of using natural biomaterials such as keratin, basic fibroblast growth factor is slowly gaining popularity in the field of medical research to achieve early healing. The main objective of this study is to evaluate the efficacy of gelatin conjoined with keratin processed from the poultry feather and commercially available basic fibroblast growth factor (bFGF) as a sandwich layer in promoting the viability of full-thickness skin mesh grafts. The efficacy was assessed from the observation of clinical, bacteriological, and histopathological findings in three groups of experimental dogs. The clinical observations such as color, appearance and discharge, and hair growth were selected as criteria which indicated good and early acceptance of graft in keratin-gelatin (group II). On bacteriological examination, Staphylococcus aureus and Proteus was identified in few animals. Histopathological study of the patched graft revealed early presences of hair follicles; sebaceous gland, and normal thickness of the epidermis in keratin-gelatin in group II treated animals compared with other group (group I-control, group III-bFGF-gelatin).

Matched MeSH terms: Gelatin/chemistry*
Gelatine enhances drug dispersion in alginate bilayer film via the formation of crystalline microaggregates

Thu HE, Ng SF

Int J Pharm, 2013 Sep 15;454(1):99-106.
PMID: 23856162 DOI: 10.1016/j.ijpharm.2013.06.082

In our previous study, a novel alginate-based bilayer film for slow-release wound dressings was successfully developed. We found that alginate alone yielded poor films; however, the addition of gelatine had significantly enhanced the drug dispersion as well as the physical properties. Here, an investigation of the drug-polymer interactions in the bilayer films was carried out. Drug content uniformity test and microscopy observation revealed that the addition of gelatine generated bilayer films with a homogenous drug distribution within the matrix. The FTIR and XRD data showed an increase in film crystallinity which might infer the presence of drug-polymer crystalline microaggregates in the films. DSC confirmed the drug-polymer interaction and indicated that the gelatine has no effect on the thermal behaviour of the microaggregates, suggesting the compatibility of the drug and excipients in the bilayer films. In conclusion, the addition of gelatine can promote homogenous dispersion of hydrophobic drugs in alginate films possibly through the formation of crystalline microaggregates.

Matched MeSH terms: Gelatin/chemistry*
An injectable poly(caprolactone trifumarate-gelatin microparticles) (PCLTF-GMPs) scaffold for irregular bone defects: Physical and mechanical characteristics

Al-Namnam NM, Kutty MG, Chai WL, Ha KO, Kim KH, Siar CH, et al.

Mater Sci Eng C Mater Biol Appl, 2017 Mar 01;72:332-340.
PMID: 28024594 DOI: 10.1016/j.msec.2016.11.086

Recently, a modified form of a three-dimension (3D) porous poly(caprolactone-trifumarate) (PCLTF) scaffold has been produced using a fabrication technique that involves gelatin microparticles porogen leaching. This poly(caprolactone trifumarate-gelatin microparticles) (PCLTF-GMPs) scaffold has been shown to be biocompatible, more flowable clinically, and has a shorter degradation time as compared to its existing predecessors. In this report, a detailed characterization of this new scaffold was performed by testing its cytocompatibility, analyzing the surface topography, and understanding its thermal, physical and mechanical properties. The result showed that the PCLTF-GMPs has no critical cytotoxic effect. To confirm improvement, the surface properties were compared against the older version of PCLTF fabricated using salt porogen leaching. This PCLTF-GMPs scaffold showed no significant difference (unpaired t-test; p>0.05) in mechanical properties before and after gelatin leaching. However, it is mechanically weaker when compared to its predecessors. It has a high biodegradability rate of 16weeks. The pore size produced ranges from 40 to 300μm, and the RMS roughness is 613.7±236.9nm. These characteristics are condusive for osteoblast in-growth, as observed by the extension of filopodia across the macropores. Overall, this newly produced material has good thermal, physical and mechanical properties that complements its biocompatibility and ease of use.

Matched MeSH terms: Gelatin/chemistry*
Gelatin controversies in food, pharmaceuticals, and personal care products: Authentication methods, current status, and future challenges

Ali E, Sultana S, Hamid SBA, Hossain M, Yehya WA, Kader A, et al.

Crit Rev Food Sci Nutr, 2018 Jun 13;58(9):1495-1511.
PMID: 28033035 DOI: 10.1080/10408398.2016.1264361

Gelatin is a highly purified animal protein of pig, cow, and fish origins and is extensively used in food, pharmaceuticals, and personal care products. However, the acceptability of gelatin products greatly depends on the animal sources of the gelatin. Porcine and bovine gelatins have attractive features but limited acceptance because of religious prohibitions and potential zoonotic threats, whereas fish gelatin is welcomed in all religions and cultures. Thus, source authentication is a must for gelatin products but it is greatly challenging due to the breakdown of both protein and DNA biomarkers in processed gelatins. Therefore, several methods have been proposed for gelatin identification, but a comprehensive and systematic document that includes all of the techniques does not exist. This up-to-date review addresses this research gap and presents, in an accessible format, the major gelatin source authentication techniques, which are primarily nucleic acid and protein based. Instead of presenting these methods in paragraph form which needs much attention in reading, the major methods are schematically depicted, and their comparative features are tabulated. Future technologies are forecasted, and challenges are outlined. Overall, this review paper has the merit to serve as a reference guide for the production and application of gelatin in academia and industry and will act as a platform for the development of improved methods for gelatin authentication.

Matched MeSH terms: Gelatin/chemistry*
Chitosan, gelatin and methylcellulose films incorporated with tannic acid for food packaging

Halim ALA, Kamari A, Phillip E

Int J Biol Macromol, 2018 Dec;120(Pt A):1119-1126.
PMID: 30176328 DOI: 10.1016/j.ijbiomac.2018.08.169

In this work, chitosan, gelatin and methylcellulose films incorporated with tannic acid (TA) were synthesised, characterised and applied for the first time to preserve cherry tomatoes (Solanum lycopersicum var. cerasiforme) and grapes (Vitis vinifera). The addition of TA at 15% (w/w) increased the transparency value of biopolymer films. The highest increment of transparency value was obtained for MC-TA film, increased from 0.572 to 4.73 A/mm. Based on antimicrobial study, the addition of TA improved the antibacterial properties of biopolymers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The ability of films to preserve both fruits was evaluated in a 14-day preservation study. The application of biopolymer films treated with TA has decreased the weight loss and browning index of fruits, as compared to control films. A significant reduction in the weight loss of cherry tomatoes wrapped with chitosan (from 21.3 to 19.6%), gelatin (from 22.1 to 15.5%) and methylcellulose (26.2 to 20.5%) films were obtained following TA treatment. Overall, results obtained from this study highlight the effects of TA on physiochemical properties of biopolymer films and their ability to preserve fruits.

Matched MeSH terms: Gelatin/chemistry*
Gelatin Hydrogels Loaded with Lactoferrin-Functionalized Bio-Nanosilver as a Potential Antibacterial and Anti-Biofilm Dressing for Infected Wounds: Synthesis, Characterization, and Deciphering of Cytotoxicity

Suleman Ismail Abdalla S, Katas H, Chan JY, Ganasan P, Azmi F, Fauzi MB

Mol Pharm, 2021 05 03;18(5):1956-1969.
PMID: 33822631 DOI: 10.1021/acs.molpharmaceut.0c01033

Gelatin hydrogels are attractive for wound applications owing to their well-defined structural, physical, and chemical properties as well as good cell adhesion and biocompatibility. This study aimed to develop gelatin hydrogels incorporated with bio-nanosilver functionalized with lactoferrin (Ag-LTF) as a dual-antimicrobial action dressing, to be used in treating infected wounds. The hydrogels were cross-linked using genipin prior to loading with Ag-LTF and characterized for their physical and swelling properties, rheology, polymer and actives interactions, and in vitro release of the actives. The hydrogel's anti-biofilm and antibacterial performances against S. aureus and P. aeruginosa as well as their cytotoxicity effects were assessed in vitro, including primary wound healing gene expression of human dermal fibroblasts (HDFs). The formulated hydrogels showed adequate release of AgNPs and LTF, with promising antimicrobial effects against both bacterial strains. The Ag-LTF-loaded hydrogel did not significantly interfere with the normal cellular functions as no alteration was detected for cell viability, migration rate, and expression of the target genes, suggesting the nontoxicity of Ag-LTF as well as the hydrogels. In conclusion, Ag-LTF-loaded genipin-cross-linked gelatin hydrogel was successfully synthesized as a new approach for fighting biofilms in infected wounds, which may be applied to accelerate healing of chronic wounds.

Matched MeSH terms: Gelatin/toxicity; Gelatin/chemistry
Antibacterial and wound healing analysis of gelatin/zeolite scaffolds

Ninan N, Muthiah M, Bt Yahaya NA, Park IK, Elain A, Wong TW, et al.

Colloids Surf B Biointerfaces, 2014 Mar 1;115:244-52.
PMID: 24362063 DOI: 10.1016/j.colsurfb.2013.11.048

In this article, gelatin/copper activated faujasites (CAF) composite scaffolds were fabricated by lyophilisation technique for promoting partial thickness wound healing. The optimised scaffold with 0.5% (w/w) of CAF, G (0.5%), demonstrated pore size in the range of 10-350 μm. Agar disc diffusion tests verified the antibacterial role of G (0.5%) and further supported that bacterial lysis was due to copper released from the core of CAF embedded in the gelatin matrix. The change in morphology of bacteria as a function of CAF content in gelatin scaffold was studied using SEM analysis. The confocal images revealed the increase in mortality rate of bacteria with increase in concentration of incorporated CAF in gelatin matrix. Proficient oxygen supply to needy cells is a continuing hurdle faced by tissue engineering scaffolds. The dissolved oxygen measurements revealed that CAF embedded in the scaffold were capable of increasing oxygen supply and thereby promote cell proliferation. Also, G (0.5%) exhibited highest cell viability on NIH 3T3 fibroblast cells which was mainly attributed to the highly porous architecture and its ability to enhance oxygen supply to cells. In vivo studies conducted on Sprague Dawley rats revealed the ability of G (0.5%) to promote skin regeneration in 20 days. Thus, the obtained data suggest that G (0.5%) is an ideal candidate for wound healing applications.

Matched MeSH terms: Gelatin/pharmacology*
Pilot study comparing steroid-impregnated and non-steroid-impregnated absorbable nasal dressing following endoscopic sinus surgery

Sow YL, Tang IP, Kho JPY, Prepageran N

Med J Malaysia, 2018 08;73(4):244-248.
PMID: 30121688

INTRODUCTION: Endoscopic sinus surgery (ESS) is the mainstay for treatment of chronic rhinosinusitis versus maximal medical therapy. We propose a more economical option, by using steroid-impregnated Gelfoam instead of Nasopore post ESS, as it is less expensive and has showed effectiveness in preventing post-operative bleeding.
MATERIALS AND METHODS: A randomised, double-blinded, placebo-controlled trial was carried out in eight patients with chronic rhinosinusitis or nasal polyposis who were planned for bilateral endoscopic sinus surgery. A Peri-operative Sinus Endoscopy (POSE) Score and Lund-Kennedy Endoscopic Score (LKES) were recorded. The use of hydrocortisone-impregnated Gelfoam dressing versus normal saline-impregnated Gelfoam dressing were compared. Scores were repeated post-operatively at one week, three weeks and three months interval.
RESULTS: For LKES, at the end of three months, 50% of the patients had the same score difference, 37.5% had better results on the study side while 12.5% had better results on the control side. Meanwhile, for POSE Score, at the end of three months, 75% of the patients had better score difference on the study side while 12.5% had better results on the control side.
CONCLUSION: Gelfoam can be used as nasal packing material to deliver topical steroid after endoscopic sinus surgery. Steroid-impregnated nasal dressing after endoscopic sinus surgery may not provide better long-term outcome.

Matched MeSH terms: Gelatin Sponge, Absorbable/therapeutic use
Fabrication and preliminary in vitro evaluation of ultraviolet-crosslinked electrospun fish scale gelatin nanofibrous scaffolds

Beishenaliev A, Lim SS, Tshai KY, Khiew PS, Moh'd Sghayyar HN, Loh HS

J Mater Sci Mater Med, 2019 May 24;30(6):62.
PMID: 31127374 DOI: 10.1007/s10856-019-6264-4

This study aimed to explore a potential use of fish scale-derived gelatin nanofibrous scaffolds (GNS) in tissue engineering due to their biological and economical merits. Extraction of gelatin was achieved via decalcification, sonication and lyophilization of mixed fish scales. To fabricate nano-scale architecture of scaffolds analogous to natural extracellular matrix, gelatin was rendered into nanofibrous matrices through 6-h electrospinning, resulting in the average diameter of 48 ± 12 nm. In order to improve the water-resistant ability while retaining their biocompatibility, GNS were physically crosslinked with ultraviolet (UV) irradiation for 5 min (UGN5), 10 min (UGN10) and 20 min (UGN20). On average, the diameter of nanofibers increased by 3 folds after crosslinking, however, Fourier transform infrared spectroscopy analysis confirmed that no major alterations occurred in the functional groups of gelatin. A degradation assay showed that UGN5 and UGN10 scaffolds remained in minimum essential medium for 14 days, while UGN20 scaffolds degraded completely after 10 days. All UGN scaffolds promoted adhesion and proliferation of human keratinocytes, HaCaT, without causing an apparent cytotoxicity. UGN5 scaffolds were shown to stimulate a better growth of HaCaT cells compared to other scaffolds upon 1 day of incubation, whereas UGN20 had a long-term effect on cells exhibiting 25% higher cell proliferation than positive control after 7 days. In the wound scratch assay, UGN5 scaffolds induced a rapid cell migration closing up to 79% of an artificial wound within 24 h. The current findings provide a new insight of UGN scaffolds to serve as wound dressings in the future. In the wound scratch assay, UGN5 induced a rapid cell migration closing up to 79% of an artificial wound within 24 h.

Matched MeSH terms: Gelatin/chemistry*

Filters

Please provide feedback to Administrator ([email protected])

External Links